pH-based cation exchange chromatography in the capture and elution of monoclonal antibodies

Cation exchange chromatography separates adsorbed proteins by controlling the salt concentration or the mobile phase pH. This study examines the pH‐based method for binding and elution of monoclonal antibodies (MAbs). Five different clones with isoelectric points from 6 to 9 were evaluated. We performed our studies using a new chromatography resin (Nuvia? S), which has high binding capacity. A three‐column process incorporating Nuvia S as a capture step was also demonstrated for the purification of MAb from tissue culture fluid. Chromatography performance of Nuvia S was demonstrated in a 50‐cycle study.     

A mechanistic study of Protein A chromatography resin lifetime

A mechanistic study into Protein A chromatographic resin lifetime limitations is presented. Binding and mass transport properties of two widely used agarose-based Protein A resins were studied to distinguish between the roles of resin fouling due to product/impurity build-up and ligand degradation as contributory factors towards the decline in binding capacity with use. Cycling studies were conducted with and without product loading on the columns to separate out the influence of resin fouling. Ligand degradation under the mildly alkaline conditions used for column regeneration was determined to be the primary cause for Protein A resin capacity decline with usage. The use of lower concentrations of caustic and the use of stabilizing excipients to protect the Protein A ligand during cleaning and sanitization were found to be useful techniques in maintaining column performance. The results presented in this paper provide a clearer understanding of the causative factors that limit Protein A chromatographic resin lifetime. It is anticipated that these findings will assist in the development of more robust and economical downstream manufacturing processes for monoclonal antibody and Fc fusion protein purification.     

A Reversible Fluorescent Probe for Real‐Time Live‐Cell Imaging and Quantification of Endogenous Hydropolysulfides

The chemical biology of reactive sulfur species, including hydropolysulfides, has been a subject undergoing intense study in recent years, but further understanding of their “intact” function in living cells has been limited owing to a lack of appropriate analytical tools. In order to overcome this limitation, we developed a new type of fluorescent probe that reversibly and selectively reacts to hydropolysulfides. The probe enables live‐cell visualization and quantification of endogenous hydropolysulfides without interference from intrinsic thiol species such as glutathione. Additionally, real‐time reversible monitoring of oxidative‐stress‐induced fluctuation of intrinsic hydropolysulfides has been achieved with a temporal resolution on the order of seconds, a result which has not yet been realized using conventional methods. These results reveal the probe's versatility as a new fluorescence imaging tool to understand the function of intracellular hydropolysulfides.     

Efficient strategy for the selective determination of dopamine in human urine by molecularly imprinted solid‐phase extraction

An efficient molecularly imprinted solid‐phase extraction protocol was developed for the separation of dopamine (DA) from human urine. After successful validation of the analytical method using high‐performance liquid chromatography coupled with fluorescence detection, a new strategy for the selective determination of DA in the presence of norepinephrine and epinephrine in human urine was presented. In the proposed protocol, the LODs and quantification for DA were 166 ± 36 and 500 ± 110 nmol/L, respectively, and the total recoveries of DA in the range of 1–15 μmol/L varied between 98.3 and 101.1%. DA was detected in the real urine samples at the level of 47–167 μg/L (0.250–0.895 μmol/L). The superiority of the novel analytical strategy was shown by comparison with the results obtained for a commercially available imprinted sorbent.     

Determination of ofloxacin enantiomers in sewage using two-step solid-phase extraction and liquid chromatography with fluorescence detection

A robust analytical method has been developed and validated for the trace analysis of ofloxacin enantiomers in sewage using two-step solid-phase extraction purification and liquid chromatography with fluorescence detection (LC-FL). Ofloxacin enantiomers were separated on an Aglient TC-C-18 column using MeOH-water containing 4mmol/L CuSO4 and 5mmol/L l-isoleucine as mobile phase. The ofloxacin enantiomers were first extracted by a weak cation-exchange resin (WCX) and eluted with acidified MeOH (0.5% formic acid), then further purified by mixed mode of anion-exchange resin (MAX), resulting in ofloxacin recoveries generally above 95%. The limit of quantification was 0.08microg/L for each enantiomer. No significant matrix effect was found during the analytical procedure and standard solution calibration curves could be used for quantification. Total concentrations of both enantiomers in real sewage samples based on LC-FL method were consistent with those obtained upon liquid chromatography using tandem mass spectrometry (LC-MS/MS) method.     

At‐line multi‐angle light scattering detector for faster process development in enveloped virus‐like particle purification

At‐line static light scattering and fluorescence monitoring allows direct in‐process tracking of fluorescent virus‐like particles. We have demonstrated this by coupling at‐line multi‐angle light scattering and fluorescence detectors to the downstream processing of enveloped virus‐like particles. Since light scattering intensity is directly proportional to particle concentration, our strategy allowed a swift identification of product containing fractions and rapid process development. Virus‐like particles containing the Human Immunodeficiency Virus‐1 Gag protein fused to the Green Fluorescence protein were produced in Human Embryonic Kidney 293 cells by transient transfection. A single‐column anion‐exchange chromatography method was used for direct capture and purification. The majority of host‐cell protein impurities passed through the column without binding. Virus‐like particles bound to the column were eluted by linear or step salt gradients. Particles recovered in the step gradient purification were characterized by nanoparticle tracking analysis, size exclusion chromatography coupled to multi‐angle light scattering and fluorescence detectors and transmission electron microscopy. A total recovery of 66% for the fluorescent particles was obtained with a 50% yield in the main product peak. Virus‐like particles were concentrated 17‐fold to final a concentration of 4.45 × 10¹⁰ particles/mL. Simple buffers and operation make this process suitable for large scale purposes.     

Specific and stable fluorescence labeling of histidine-tagged proteins for dissecting multi-protein complex formation

Labeling of proteins with fluorescent dyes offers powerful means for monitoring protein interactions in vitro and in live cells. Only a few techniques for noncovalent fluorescence labeling with well-defined localization of the attached dye are currently available. Here, we present an efficient method for site-specific and stable noncovalent fluorescence labeling of histidine-tagged proteins. Different fluorophores were conjugated to a chemical recognition unit bearing three NTA moieties (tris-NTA). In contrast to the transient binding of conventional mono-NTA, the multivalent interaction of tris-NTA conjugated fluorophores with oligohistidine-tagged proteins resulted in complex lifetimes of more than an hour. The high selectivity of tris-NTA toward cumulated histidines enabled selective labeling of proteins in cell lysates and on the surface of live cells. Fluorescence labeling by tris-NTA conjugates was applied for the analysis of a ternary protein complex in solution and on surfaces. Formation of the complex and its stoichiometry was studied by analytical size exclusion chromatography and fluorescence quenching. The individual interactions were dissected on solid supports by using simultaneous mass-sensitive and multicolor fluorescence detection. Using these techniques, formation of a 1:1:1 stoichiometry by independent interactions of the receptor subunits with the ligand was shown. The incorporation of transition metal ions into the labeled proteins upon labeling with tris-NTA fluorophore conjugates provided an additional sensitive spectroscopic reporter for detecting and monitoring protein-protein interactions in real time. A broad application of these fluorescence conjugates for protein interaction analysis can be envisaged.     

Combined chromatographic strategy based on macroporous resin,high‐speed counter‐current chromatography and preparative HPLC for systematic separation of seven antioxidants from the fruit of Terminalia billerica

In the present study, combined chromatographic strategy based on macroporous resin, high‐speed counter‐current chromatography and preparative high‐performance liquid chromatography for systematic separation of antioxidants from crude samples guided by high‐performance liquid chromatography with 1,1‐diphenyl‐2‐picrylhydrazyl has been successfully established. Based on this strategy, seven antioxidants including isorugosin A, _β‐1,2,3,6‐tetragalloyl‐D ‐glucose, chebulinic acid, 1,2,3,4,6‐penta‐O‐galloyl‐_β‐D‐glucose, chebulagic acid, ethyl gallate, and gallic acid were obtained from the fruit of Terminalia billerica. First, high‐performance liquid chromatography with 1,1‐diphenyl‐2‐picrylhydrazyl experiment showed the presence of seven main antioxidants in the crude extract of the fruit of Terminalia billerica. Then, a macroporous resin column chromatography method was developed for the enrichment of these seven antioxidants. Finally, an efficient method based on high‐speed counter‐current chromatography and preparative high‐performance liquid chromatography was developed for the separation of these antioxidants. In the selection of solvent systems, it was found that acetic acid could be a good regulator for modifying the partition coefficient values of tannins. The present study provides a reference for systematic separation of antioxidants from crude samples. Considering the general existence of antioxidants in crude samples, this combined chromatographic strategy might lead to broader application prospects.     

Enhancing the selectivity of liquid chromatography–mass spectrometry by using trilinear decomposition on LC‐MS data: An application to three‐way calibration of coeluting analytes in human plasma

The high selectivities of liquid chromatography and mass spectrometry make liquid chromatography–mass spectrometry one of the most popular tools for quantitative analysis in complex chemical, biological, and environmental systems, while the potential mathematical selectivity of liquid chromatography–mass spectrometry is rarely investigated. This work discussed the mathematical selectivity of liquid chromatography–mass spectrometry by three‐way calibration based on the trilinear model, with an application to quantitative analysis of coeluting aromatic amino acids in human plasma. By the trilinear decomposition of the constructed liquid chromatography–mass spectrometry‐sample trilinear model and individual regression of the decomposed relative intensity versus concentration, the proposed three‐way calibration method successfully achieved quantitative analysis of coeluting aromatic amino acids in human plasma, even in the presence of uncalibrated interferent(s) and a varying background. This analytical method can ease the requirements for sample preparation and complete chromatographic separation of components, reduce the use of organic solvents, decrease the time of chromatographic separation, and increase the peak capacity of liquid chromatography–mass spectrometry. As a “green analytical method”, the liquid chromatography–mass spectrometry three‐way calibration method can provide a promising tool for direct and fast quantitative analysis in complex systems containing uncalibrated spectral interferents, especially for the situation where the coelution problem is difficult to overcome.     

Analytical quality by design in the development of a cyclodextrin‐modified capillary electrophoresis method for the assay of metformin and its related substances

Quality by Design (QbD) is a new paradigm of quality to be applied to pharmaceutical products and processes, recently encouraged by International Conference on Harmonisation guidelines. In this paper QbD approach was applied to the development of a CE method for the simultaneous assay of metformin hydrochloride (MET) and its main impurities. QbD strategy was focused on electrophoretic process understanding, and the analytical method was thoroughly evaluated by applying risk assessment and chemometric tools. Method scouting allowed CD‐CZE based on the addition of carboxymethyl‐β‐CD to Britton‐Robinson acidic buffer to be chosen as operative mode. Seven critical process parameters (CPPs) were selected, related to capillary, injection, BGE and instrumental settings. The effect of the different levels of the CPPs on critical quality attributes (CQAs), e.g. critical resolution values and analysis time, was evaluated in a screening study. Response surface methodology led to draw contour plots and sweet spot plots. The definition of design space was accomplished by applying Monte‐Carlo simulations, thus identifying by risk of failure maps a multivariate zone where the CQAs fulfilled the requirements with a selected probability. Finally, a control strategy was designed and the method was applied to a real sample of MET tablets.     

Low-pressure membrane filtration of secondary effluent in water reuse: Pre-treatment for fouling reduction

Fouling in the low-pressure membrane filtration of secondary effluent for water reuse can be severe due to the complex nature of the components in the water. Pre-filtration, coagulation and anion exchange resin were investigated as pre-treatments for reducing fouling of microfiltration (MF) and ultrafiltration (UF) membranes in the treatment of activated sludge-lagoon effluent. The key fouling components were determined using several analytical techniques to detect differences in the organic components between the feed and permeate.Pre-filtration (1.5 μm) enhanced the permeate flux for MF by removing particulates, but had little effect for UF. Marked flux improvement was obtained by coagulation pre-treatment at 5 mg L⁻¹ Al³⁺ with internal membrane fouling being substantially alleviated. Anion exchange resin removed >50% of effluent organic matter but did not improve the flux or reduce irreversible membrane fouling. These results, together with detailed organic compositional analyses, showed that the very high-molecular weight organic materials (40–70 kDa) comprised of hydrophilic components such as soluble microbial products, and protein-like extracellular matter were the major cause of membrane fouling.     

Development of an ultra high performance liquid chromatography method for determining triamcinolone acetonide in hydrogels using the design of experiments/design space strategy in combination with process capability index

An ultra high performance liquid chromatography method was developed and validated for the quantitation of triamcinolone acetonide in an injectable ophthalmic hydrogel to determine the contribution of analytical method error in the content uniformity measurement. During the development phase, the design of experiments/design space strategy was used. For this, the free R‐program was used as a commercial software alternative, a fast efficient tool for data analysis. The process capability index was used to find the permitted level of variation for each factor and to define the design space. All these aspects were analyzed and discussed under different experimental conditions by the Monte Carlo simulation method. Second, a pre‐study validation procedure was performed in accordance with the International Conference on Harmonization guidelines. The validated method was applied for the determination of uniformity of dosage units and the reasons for variability (inhomogeneity and the analytical method error) were analyzed based on the overall uncertainty.     

Monolith affinity chromatography for the rapid quantification of a single‐chain variable fragment immunotoxin

We developed a novel analytical method for concentration determination of tandem single‐chain antibody diphtheria toxin (immunotoxin). The method is based on polymethacrylate monoliths with Protein L ligands as the binding moiety. Different buffers were tested for elution of the Protein L‐bound immunotoxin and 4.5 M guanidinium hydrochloride performed best. We optimized the elution conditions and the method sequence resulting in a fast and robust method with a runtime <10 min. Fast determination of immunotoxin is critical if any process decisions rely on this data. We determined method performance and a lower limit of detection of 27 μg/mL and a lower limit of quantification of 90 μg/mL was achieved. The validity of the method in terms of residual analysis, precision, and repeatability was proven in a range from 100 to 375 μg/mL. The short runtime and ease of use of a high‐performance liquid chromatography method is especially useful for a process analytical tool approach. Bioprocesses related to immunotoxin where fermentation or other process parameters can be adjusted in accordance to the immunotoxin levels will be benefited from this method to achieve the highest possible purity and productivity.     

A hierarchical screening method for detection of illegal adulterants in Fur seal ginseng pills by profiling analysis of HPLC multi‐dimensional fingerprints

A novel method for hierarchical screening of illegal adulterants in Fur seal ginseng pills products was developed by multi‐dimensional fingerprint profiling analysis. Fingerprint feature of the samples was acquired by high‐performance liquid chromatography analysis of 11 batches of samples with diode array detector and fluorescence detector, and then potential illegal adulterants including phosphodiesterase type‐5 inhibitors, androgens, α receptor antagonists and yohimbine, were further separated at multiple wavelengths to reduce or remove interferences from sample matrix for highlight their chromatographic characteristics. Accordingly, a hierarchical screening strategy was designed by first‐order and second‐order fingerprints combined with spectral examination to achieve high accuracy and reliability. The method was successfully applied to screening of illegal adulterants in real samples, and it also exhibited good quantification performance through validation tests. From 16 batches of samples, three suspected samples were confirmed to be positive, containing 9.37μg/g of testosterone, 18.8 μg/g of tadalafil, and 48.5 μg/g of sildenafil, respectively. The recoveries and relative standard deviations were in the range of 83.6–103.1% and 4.2–6.8%, respectively. The proposed method provided a simple, efficient and promising alternative to monitoring functional foods.     

Preparation of porous magnetic molecularly imprinted polymers for fast and specifically extracting trace norfloxacin residue in pork liver

Here, magnetic molecularly imprinted polymers were designed for norfloxacin via oil‐in‐water emulsifier‐free emulsion method. It was prepared by simply mixing norfloxacin, methacrylic acid‐co‐ethylene glycol dimethacrylate copolymer, and Fe₃O₄ together at room temperature. Characterized by multiple analytical tools, the particle size, pore size, pore volume, specific surface area, and saturation magnetization of the product were about 30 µm, 10–500 nm, 2.92 mL/g, 105.84 m²/g, and 3.052 emu/g, respectively. And the adsorption capacity was high at 27.04 mg/g towards norfloxacin. Combined with ultra high performance liquid chromatography, it was used to determine norfloxacin in real samples. Average recoveries were above 77.44% with relative standard deviations between 1.21 and 6.85% at three spiked levels (n = 3) for lake water and pork liver. The determination was achieved for the most complex biosample pork liver spiked with norfloxacin low to 30 ng/g, about 100 times less than the maximum residue limit regulated by Commission of the European Communities. All evidences demonstrated that the magnetic molecularly imprinted polymers can be used in practice for monitoring norfloxacin either in environmental water or meat product with high accuracy and reliability.     

Mechanochemical Sensing: A Biomimetic Sensing Strategy

Existing biosensors employ two major components: analyte recognition and signal transduction. Although specificity is achieved through analyte recognition, sensitivity is usually enhanced through a chemical amplification stage that couples the two main units in a sensor. Although highly sensitive, the extra chemical amplification stage complicates the sensing protocol. In addition, it separates the two elements spatiotemporally, reducing the real‐time response of the biosensor. In this review, we discuss the new mechanochemical biosensors that employ mechanochemical coupling strategies to overcome these issues. By monitoring changes in the mechanical properties of a single‐molecule template upon analyte binding, single‐molecule sensitivity is reached. As chemical amplification becomes unnecessary in this single‐molecule mechanochemical sensing (SMMS) strategy, real‐time sensing is achieved.     

Separation and purification of two minor typical diarrhetic shellfish poisoning toxins from harmful marine microalgae via combined liquid chromatography with mass spectrometric detection

A novel method was developed for the purification of two typical diarrhetic shellfish poisoning toxins from toxin‐producing marine microalgae using macroporous resin, high‐speed countercurrent chromatography–mass spectrometry, and semipreparative high‐performance liquid chromatography–mass spectrometry. Analytical high‐performance liquid chromatography–mass spectrometry was used for identification and purity analysis of okadaic acid and dinophysistoxin‐1 because they exhibit no visible or ultraviolet absorption. First, four kinds of macroporous resins were investigated, and HP‐20 macroporous resin was selected for the preenrichment and cleanup of the two target toxins. Second, the resin‐purified sample was further purified using high‐speed countercurrent chromatography coupled with a mass spectrometer. The purities of the obtained okadaic acid and dinophysistoxin‐1 were 89.0 and 83.0%, respectively, as determined through analytical high‐performance liquid chromatography–mass spectrometry. Finally, further purification was carried out using semipreparative high‐performance liquid chromatography with mass spectrometry, and the purities of the final okadaic acid and dinophysistoxin‐1 products were both over 98.0% based on the analytical high‐performance liquid chromatography–mass spectrometry chromatograms and fraction spectra. This work demonstrates that the proposed purification process is a powerful method for the preparation of high‐purity okadaic acid and dinophysistoxin‐1 from toxin‐producing marine microalgae. Moreover, it is particularly important for the purification and preparation of minor toxins that exhibit no visible or ultraviolet absorption from harmful marine algae.     

In-line monitoring of alcohol precipitation by near-infrared spectroscopy in conjunction with multivariate batch modeling

Alcohol precipitation is a critical unit operation during the manufacture of Chinese herbal injections. To facilitate enhanced process understanding and develop control strategy, the use of near-infrared spectroscopy (NIRS) combined with multivariate statistical process control (MSPC) methodology was investigated for in-line monitoring of alcohol precipitation. The effectiveness of the proposed approach was evaluated through an experimental campaign. Six batches were run under normal operating conditions to study batch-to-batch variation or batch reproducibility and establish MSPC control limits, while artificial process variations were purposefully introduced into the four test batches to assess the capability of the model for real-time fault detection. Several MSPC tools were compared and assessed. NIRS, in conjunction with MSPC, has proven to be a feasible process analytical technology (PAT) tool for monitoring batch evolution and potentially facilitating model-based advanced process control of the alcohol precipitation during the manufacture of Chinese herbal injections.     

Engineering of a two-step purification strategy for a panel of monoclonal immunoglobulin M directed against undifferentiated human embryonic stem cells

A two-step purification strategy comprising of polyethylene glycol (PEG) precipitation and anion-exchange chromatography was developed for a panel of monoclonal immunoglobulin M (IgM) (pI 5.5–7.7) produced from hybridoma cultures. PEG precipitation was optimized with regards to concentration, pH and mixing. For anion-exchange chromatography, different resins were screened of which Fractogel EMD, a polymer grafted porous resin had the highest capacity. Despite its significantly slower mass transfer, the binding capacity was still higher compared to a convection driven resin (monolith). This purification strategy was successfully demonstrated for all 9 IgMs in the panel. In small scale most antibodies could be purified to >95% purity with the exception of two which gave a lower final purity (46% and 85%). The yield was dependent on the different antibodies ranging from 28% to 84%. Further improvement of recovery and purity was obtained by the digestion of DNA present in the hybridoma supernatant using an endonuclease, benzonase. So far this strategy has been applied for the purification of up to 2 l hybridoma supernatants.     

Comparison of activated chromatography resins for protein immobilization

The adsorption of bovine serum albumin (BSA) to an immobilized camelid‐derived antibody fragment was investigated using six different activated resins, of which two are prototypes. The resins differed in base material, coupling chemistry and particle size. The adsorption, washing and desorption stage of the affinity chromatography process were taken into account. Dynamic binding capacities at 10% breakthrough ranged between 0.76 and 4.8 mg BSA/mL resin. The washing volume ranged between 2.9 and 10 column volumes. One of the resins did not concentrate BSA, while the highest concentration was 13‐fold. We present a method to rank and weigh the properties of the resins to find the optimal resin to meet specific requirements. For three of the resins the adsorption flow rate was varied, while the washing and desorption flow rate was kept the same. The dynamic binding capacity decreased with increasing flow rate, as expected. For one resin, the washing volume remained constant, but for the others it decreased with increasing adsorption flow rate. The number of column volumes required to purify a given amount of BSA increases with increasing flow rate, which indicates that higher flow rates do not necessarily speed up the process.