Photoswitchable Adhesives Using Azobenzene‐Containing Materials

Photoinduced reversible solid‐to‐liquid transitions of azobenzene‐containing materials can control adhesion. Photoswitchable adhesives based on azobenzene‐containing small molecules and polymers are under intense investigation. The melting points or glass transition temperatures of such azobenzene‐containing materials in trans and cis forms are above and below room temperature, respectively. Photoswitching of these materials results in reversible trans‐cis isomerization and solid‐to‐liquid transitions. The solid trans azobenzene‐containing materials have strong adhesion and the liquid cis azobenzene‐containing materials have weaker adhesion. In this Minireview, we introduce adhesives based on azobenzene‐containing small molecules and polymers. The remaining challenges and perspectives in the field of photoswitchable adhesives using azobenzene‐containing materials are also discussed.     

A Novel pH/Light‐Triggered Surface for DNA Adsorption and Release

A simple strategy for the immobilization of Cy3‐labeled single strand DNA (Cy3‐ssDNA) on a Si(001) surface and its release under control of both light and pH stimuli is presented. In order to prepare a dual pH/light‐triggered surface, positively chargeable azobenzene molecules are self‐assembled on the Si(001) surface. The surface wettability of this substrate can be changed under influence of both light and pH conditions. The substrates can be positively charged under mildly acidic conditions. The pH‐sensitive behavior of the film allows binding of Cy3‐ssDNA on the functionalized Si(001) surface through e?ective electrostatic interactions with the negatively charged polynucleotide backbone. Moreover, irradiation of the film with UVA light induces trans–cis isomerization of the azobenzene units on the surface. As a result, the binding a?nity for DNA decreases due to the changing surface hydrophilicity. In order to understand and control the reversible photoswitchable mechanism of this surface, water contact angles are measured after UVA and visible light irradiation. The release of DNA from a dual pH/light‐sensitive sample is performed using fluorescence microscopy. The results show that irradiation of the film with UVA light induces trans–cis isomerization of the photoresponsive azobenzene units; this leads to significant changes in the surface hydrophilicity and reduces the binding affinity for DNA.     

A Natural Glycyrrhizic Acid‐Tailored Light‐Responsive Gelator

The construction of stimuli‐responsive materials by using naturally occurring molecules as building blocks has received increasing attention owing to their bioavailability, biocompatibility, and biodegradability. Herein, a symmetrical azobenzene‐functionalized natural glycyrrhizic acid (trans‐ GAG ) was synthesized and could form stable supramolecular gels in DMSO/H₂O and MeOH/H₂O. Owing to trans–cis isomerization, this gel exhibited typical light‐responsive behavior that led to a reversible gel–sol transition accompanied by a variation in morphology and rheology. Additionally, this trans‐ GAG gel displayed a distinct injectable self‐healing property and outstanding biocompatibility. This work provides a simple yet rational strategy to fabricate stimuli‐responsive materials from naturally occurring, eco‐friendly molecules.     

1,2‐Dithienyldicyanoethene‐Based,Visible‐Light‐Driven,Chiral Fluorescent Molecular Switch: Rewritable Multimodal Photonic Devices

Reported here is the first example of a 1,2‐dithienyldicyanoethene‐based visible‐light‐driven chiral fluorescent molecular switch that exhibits reversible trans to cis photoisomerization. The trans form in solution almost completely transforms into the cis form, accompanied by a 10‐fold decrease in its fluorescence intensity within 60 seconds when exposed to green light (520 nm). The reverse isomerization proceeds upon irradiation with blue light (405 nm). When doped into commercially available achiral liquid crystal hosts, this molecular switch efficiently induces luminescent helical superstructures, that is, a cholesteric phase. The intensity of the circularly polarized fluorescence as well as the selective reflection wavelength of the induced cholesteric phases can be reversibly tuned using visible light of two different wavelengths. Optically rewritable photonic devices using cholesteric films containing this molecular switch are described.     

1,2‐Dithienyldicyanoethene‐Based,Visible‐Light‐Driven,Chiral Fluorescent Molecular Switch: Rewritable Multimodal Photonic Devices

Reported here is the first example of a 1,2‐dithienyldicyanoethene‐based visible‐light‐driven chiral fluorescent molecular switch that exhibits reversible trans to cis photoisomerization. The trans form in solution almost completely transforms into the cis form, accompanied by a 10‐fold decrease in its fluorescence intensity within 60 seconds when exposed to green light (520 nm). The reverse isomerization proceeds upon irradiation with blue light (405 nm). When doped into commercially available achiral liquid crystal hosts, this molecular switch efficiently induces luminescent helical superstructures, that is, a cholesteric phase. The intensity of the circularly polarized fluorescence as well as the selective reflection wavelength of the induced cholesteric phases can be reversibly tuned using visible light of two different wavelengths. Optically rewritable photonic devices using cholesteric films containing this molecular switch are described.     

Coordination‐Driven Macrocyclization for Locking of Photo‐ and Thermal cis→trans Isomerization of Azobenzene

Both trans and cis isomers of azobenzene‐linked bis‐terpyridine ligand L1 were incorporated in rigid macrocycles linked by Fe^II(tpy)₂ (tpy: terpyridine) units. The complex of the longer trans‐ L1 is dinuclear [(trans‐ L1 )₂ ? Fe^II₂], whereas the complex of the shorter cis‐ L1 is mononuclear [cis‐ L1? Fe^II]. The complex cis‐ L1? Fe^II was not only thermally stable but also photochemically inactive. These results indicate a perfectly locked state of cis‐azobenzene. The stable macrocyclic structure of cis‐ L1? Fe^II causes locking of the isomerization. To the best of our knowledge, this is first example of dual locking of photo‐ and thermal isomerization of cis‐azobenzene.     

Click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant‐based copoly(decyloxymethacrylate)s for dual‐mode optical switches

Copolymer containing new thermally reversible click chemistry‐assisted triazole‐substituted azobenzene and fulgimide units in the pendant F‐co‐A was prepared by free‐radical solution addition polymerization technique. The F and A were also prepared for comparison. The DSC analysis of F indicates that the polymer possessing the C‐form of fulgimide unit exhibited higher T_m than that of E‐form of the same polymer and revealed that the C‐form of fulgimide unit in F is highly ordered. The cis‐trans back isomerization behavior of the click chemistry‐assisted triazole‐substituted azobenzene unit in film A has thermal irreversibility, while in F‐co‐A it exhibited thermal reversibility. The UV‐exposed film of F‐co‐A heated around T_g leads to cis‐trans back isomerization of azobenzene unit and thermally stable C‐form of fulgimide which retains its conjugated structure where both the photochromic units are converted into planar conformations and exhibit high fluorescence properties. The fluorescence maxima of C‐form in F‐co‐A red shifted compared with F , because the substituted triazole ring in the azobenzene unit stabilized the C‐form of fulgimide unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7843–7860, 2008     

Reversible Transformation between Amorphous and Crystalline States of Unsaturated Polyesters by Cis–Trans Isomerization

An aliphatic polyester has been prepared from ethylene oxide and maleic anhydride that undergoes reversible transformation between amorphous (T_g=18 °C) and crystalline (T_m=124 °C) states through cis–trans isomerization of the C=C bonds in the polymer backbone without any change in either the molecular weight or dispersity of the polymer. A similar transformation was also observed in chiral unsaturated polyesters formed from enantiopure terminal epoxides, such as epichlorohydrin, phenyl glycidyl ether, and (2,3‐epoxypropyl)benzene. These unsaturated polyesters with 100 % E‐configuration in the crystalline state were prepared by quantitative isomerization of their Z‐configuration analogues in the presence of a catalytic amount of diethylamine, while in the presence of benzophenone, irradiation with 365 nm UV light resulted in the transformation of about 30 % trans‐alkene to cis‐maleate form, thereby affording amorphous polyesters.     

Nanoscale Chemical Imaging of Reversible Photoisomerization of an Azobenzene‐Thiol Self‐Assembled Monolayer by Tip‐Enhanced Raman Spectroscopy

An understanding of the photoisomerization mechanism of molecules bound to a metal surface at the molecular scale is required for designing photoswitches at surfaces. It has remained a challenge to correlate the surface structure and isomerization of photoswitches at ambient conditions. Herein, the photoisomerization of a self‐assembled monolayer of azobenzene‐thiol molecules on a Au surface was investigated using scanning tunneling microscopy and tip‐enhanced Raman spectroscopy. The unique signature of the cis isomer at 1525 cm^?1 observed in tip‐enhanced Raman spectra was clearly distinct from the trans isomer. Furthermore, tip‐enhanced Raman images of azobenzene thiols after ultraviolet and blue light irradiation are shown with nanoscale spatial resolution, demonstrating a reversible conformational change. Interestingly, the cis isomers of azobenzene‐thiol molecules were preferentially observed at Au grain edges, which is confirmed by density functional theory.     

Poly(1,4‐cyclohexylenedimethylene 1,4‐cyclohexanedicarboxylate): Influence of stereochemistry of 1,4‐cyclohexylene units on the thermal properties

A series of poly(1,4‐cyclohexylenedimethylene 1,4‐cyclohexanedicarboxylate) (PCCD) samples, characterized by different cis/trans ratio of the 1,4‐cyclohexanedicarbonyl unit, have been synthesized and analyzed by thermogravimetry (TGA), calorimetry (DSC), and X‐ray diffraction (WAXD). The thermal stability results are good and are not affected by the stereochemistry of the 1,4‐cyclohexylene units. On the other hand, the thermal transitions are notably influenced by the cis/trans content. With the increment of the trans content the polymer changes from completely amorphous to semicrystalline material. T_g, T_m, and crystallinity increase. These results suggest that the trans configuration induces a better chain packing and higher symmetry, improving the crystallizability of the samples. The effect of the molecular structure on the thermal properties is analyzed by using a statistical approach. From the effective correlations found between stereochemistry of the C₆ rings and transition temperatures it is possible to extrapolate that the configuration of 1,4‐cyclohexylene ring deriving from 1,4‐cyclohexanedicarboxylic acid or dimethyl 1,4‐cyclohexanedicarboxylate results to be the main element responsible for the thermal properties. This is due to the high rigidity of the 1,4‐cyclohexanedicarbonyl unit with respect to 1,4‐cyclohexanedimethyleneoxy unit, deriving from the diol. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 619–630, 2008     

trans–cis Photoisomerization of Azobenzene‐Conjugated Dithiolato‐Bipyridine Platinum(II) Complexes: Extension of Photoresponse to Longer Wavelengths and Photocontrollable Tristability

Azobenzene derivatives modified with dithiolato‐bipyridine platinum(II) complexes were synthesized, revealing their highly extended photoresponses to the long wavelength region as well as unique photocontrollable tristability. The absorptions of trans‐ 1 and trans‐ 2 with one azobenzene group on the dithiolene and bipyridine ligands, respectively, cover the range from 300 to 700 nm. These absorptions are ascribed, by means of time‐dependent (TD)DFT calculations, to transitions from dithiolene(π) to bipyridine(π*), namely, interligand charge transfer (CT), π–π*, and n–π* transitions of the azobenzene unit, and π–π* transitions of the bipyridine ligand. In addition, only trans‐ 1 shows distinctive electronic bands, assignable to transitions from the dithiolene(π) to azobenzene(π*), defined as intraligand CT. Complex 1 shows photoisomerization behavior opposite to that of azobenzene: trans‐to‐cis and cis‐to‐trans conversions proceed with 405 and 312 nm irradiation, which correspond to excitation with the intraligand CT, and π–π* bands of the azobenzene and bipyridine units, respectively. In contrast, complex 2 shows photoisomerization similar to that of azobenzene: trans‐to‐cis and cis‐to‐trans transformations occur with 365 and 405 nm irradiation, respectively. Irradiation at 578 nm, corresponding to excitation of the interligand CT transitions, results in cis‐to‐trans conversion of both 1 and 2 , which is the longest wavelength ever reported to effect the photoisomerization of the azobenzene group. The absorption and photochromism of 4 , which has azobenzene groups on both the dithiolato and bipyridine ligands, have characteristics quite similar to those of 1 and 2 , which furnishes 4 with photocontrollable tristability in a single molecule using light at 365, 405, and 578 nm. We also clarified that 1 and 2 have high photoisomerization efficiencies, and good thermal stability of the cis forms. Complexes 3 and 5 have almost the identical photoresponse to those of their positional isomers, complexes 2 and 4 .     

Control of the Orientation and Photoinduced Phase Transitions of Macrocyclic Azobenzene

Photoinduced phase transitions caused by photochromic reactions bring about a change in the state of matter at constant temperature. Herein, we report the photoinduced phase transitions of crystals of a photoresponsive macrocyclic compound bearing two azobenzene groups ( 1 ) at room temperature on irradiation with UV (365 nm) and visible (436 nm) light. The trans/trans isomer undergoes photoinduced phase transitions (crystal–isotropic phase–crystal) on UV light irradiation. The photochemically generated crystal exhibited reversible phase transitions between the crystal and the mesophase on UV and visible light irradiation. The molecular order of the randomly oriented crystals could be increased by irradiating with linearly polarized visible light, and the value of the order parameter was determined to be ?0.84. Heating enhances the thermal cis‐to‐trans isomerization and subsequent cooling returned crystals of the trans/trans isomer.     

A Light‐Controlled Molecular Brake with Complete ON–OFF Rotation

A light‐controlled molecular machine based on cyclic azobenzenophanes consisting of a dioxynaphthalene rotating unit and a photoisomerizable dioxyazobenzene unit bridged by methylene spacers is reported. In compounds 1 and 2 , 1,5‐ and 2,6‐dioxynaphthalene moieties, respectively, are linked to p‐dioxyazobenzene by different methylene spacers (n=2 in 1 a and 2 ; n=3 in 1 b ), whereas a 1,5‐dioxynaphthalene moiety is bonded to m‐dioxyazobenzene by bismethylene spacers in 3 . In 1 b and 2 , the naphthalene ring can rotate freely in both the trans and cis states at room temperature. The rotation speed can be controlled either by photoinduced reversible trans–cis (E–Z) isomerization of the azobenzene or by keeping the system at low temperature, as is evident from its NMR spectra. Furthermore, for the first time, we demonstrate a light‐controlled molecular brake, wherein the rotation of the naphthalene moiety through the cyclophane is completely OFF in the trans isomer of compound 3 due to its smaller cavity size. Such restricted rotation imparts planar chirality to the molecule, and the corresponding enantiomers could be resolved by chiral HPLC. However, the rotation of the naphthalene moiety is rendered ON in the cis isomer due to its increased cavity size, and it is manifested experimentally by the racemization of the separated enantiomers by photoinduced E–Z isomerization.     

Design and proof of reversible micelle‐to‐vesicle multistimuli‐responsive morphological regulations

Multistimuli‐responsive precise morphological control over self‐assembled polymers is of great importance for applications in nanoscience as drug delivery system. A novel pH, photoresponsive, and cyclodextrin‐responsive block copolymer were developed to investigate the reversible morphological transition from micelles to vesicles. The azobenzene‐containing block copolymer poly(ethylene oxide)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐6‐(4‐phenylazo phenoxy)hexyl methacrylate) [PEO‐b‐P(DEAEMA‐co‐PPHMA)] was synthesized by atom transfer radical polymerization. This system can self‐assemble into vesicles in aqueous solution at pH 8. On adjusting the solution pH to 3, there was a transition from vesicles to micelles. The same behavior, that is, transition from vesicles to micelles was also realizable on addition of β‐cyclodextrin (β‐CD) to the PEO‐b‐P(DEAEMA‐co‐PPHMA) solution at pH 8. Furthermore, after β‐CD was added, alternating irradiation of the solution with UV and visible light can also induce the reversible micelle‐to‐vesicle transition because of the photoinduced trans‐to‐cis isomerization of azobenzene units. The multistimuli‐responsive precise morphological changes were studied by laser light scattering, transmission electron microscopy, and UV–vis spectra. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Molecular Design for Reversing the Photoswitching Mode of Turning ON and OFF DNA Hybridization

A new photoswitch for DNA hybridization involving para‐substituted azobenzenes (such as isopropyl‐ or tert‐butyl‐substituted derivatives) with L ‐threoninol as a linker was synthesized. Irradiation of the modified DNA with visible light led to dissociation of the duplex owing to the destabilization effect of the bulky substituent on the trans‐azobenzene. In contrast, trans‐to‐cis isomerization (UV light irradiation) facilitated duplex formation. The direction of this photoswitching mode was entirely reversed relative to the previous system with an unmodified azobenzene on D ‐threoninol whose trans form turned on the hybridization, and cis form turned it off. Such reversed and reversible photoswitching of DNA hybridization was directly demonstrated by using fluorophore‐ and quencher‐attached oligonucleotides. Furthermore, it was revealed that the cis‐to‐trans thermal isomerization was greatly suppressed in the presence of the complementary strand owing to the formation of the more‐stable duplex in the cis form.     

Supramolecular Tubule from Seesaw Shaped Amphiphile and Its Hierarchical Evolution into Sheet

Although supramolecular one‐dimensional (1D) and two‐dimensional (2D) structures with various unique properties have been extensively studied, the reversible switching between tubules and sheets via lateral association remains challenging. Here, we report the unique structures of a supramolecular tubular bamboo culm in which the hollow‐tubular interior is separated, at intervals, by nodes per 1.3 nm. Interestingly, the discrete tubules are able to hierarchically assemble into a flat sheet in response to an aromatic guest. The addition of trans‐azobenzene, as a guest, enables the tubules to form a hierarchical sheet assembly via the lateral interaction. The hierarchical sheet structures are disassembled into their constituent tubules upon UV irradiation due to trans‐cis isomerization. The recovery from cis‐azobenzene to trans‐form induces repeatedly the hierarchical sheet assembly, indicative of a reversible switching behavior between tubules and sheets triggered by an external stimulus.     

Effect of the ortho Modification of Azobenzene on the Photoregulatory Efficiency of DNA Hybridization and the Thermal Stability of its cis Form

We synthesized various azobenzenes methylated at their ortho positions with respect to the azo bond for more effective photoregulation of DNA hybridization. Photoregulatory efficiency, evaluated from the change of T_m (ΔT_m) induced by trans–cis isomerization, was significantly improved for all ortho‐modified azobenzenes compared with non‐modified azobenzene due to the more stabilized trans form and the more destabilized cis form. Among the synthesized azobenzenes, 4‐carboxy‐2′,6′ ‐ dimethylazobenzene ( 2′,6′‐Me‐Azo ), in which two ortho positions of the distal benzene ring with respect to carboxyl group were methylated, exhibited the largest ΔT_m, whereas the newly synthesized 2,6‐Me‐Azo (4‐carboxy‐2,6‐dimethylazobenzene), which possesses two methyl groups on the two ortho positions of the other benzene ring, showed moderate improvement of ΔT_m. Both NMR spectroscopic analysis and computer modeling revealed that the two methyl groups on 2′,6′‐Me‐Azo were located near the imino protons of adjacent base pairs; these stabilized the DNA duplex by stacking interactions in the trans form and destabilized the DNA duplex by steric hindrance in the cis form. In addition, the thermal stability of cis‐ 2′,6′‐Me‐Azo was also greatly improved, but not that of cis‐ 2,6‐Me‐Azo . Solvent effects on the half‐life of the cis form demonstrated that cis‐to‐trans isomerization of all the modified azobenzenes proceeded through an inversion route. Improved thermal stability of 2′,6′‐Me‐Azo but not 2,6‐Me‐Azo in the cis form was attributed to the retardation of the inversion process due to steric hindrance between lone pair electrons of the π orbital of the nitrogen atom and the methyl group on the distal benzene ring.     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Novel Photoresponsive Linear,Graft, and Comb‐Like Copolymers with Azobenzene Chromophores in the Main‐Chain and/or Side‐Chain: Facile One‐Pot Synthesis and Photoresponse Properties

Novel photoresponsive linear, graft, and comb‐like copolymers with azobenzene chromophores in the main‐chain and/or side‐chain are prepared via a sequential ring‐opening metathesis polymerization (ROMP) and head‐to‐tail acyclic diene metathesis (ADMET) polymerization in a one‐pot procedure using Grubbs ruthenium‐based catalysts. The diluted solutions of these as‐prepared copolymers containing azobenzene chromophores exhibit photochemical trans–cis isomerization under the irradiation of UV light, followed by their cis–trans back‐isomerization in visible light. The rates of photoisomerization are found to be slower than those of back‐isomerization, and the rate for the comb‐like copolymer is found to be from 3 to 7 times slower than that obtained for the linear or graft copolymer. This is ascribed to the differences in structure of the copolymers and the specific location of azobenzene chromophores in the copolymer, which favor a side‐chain graft structure.

     

Three‐Component Supramolecular System with Multistimuli‐Responsive Properties in Water

Hyperbranched polyethylenimine terminated with isobutyramide groups (HPEI‐IBAm), 4‐(phenylazo)benzoic acid (PABA), and α‐cyclodextrin (α‐CD) were assembled together at pH≈7 to form the three‐component supramolecular complexes that were verified by ¹H and 2D ROESY ¹H NMR spectroscopy. UV/Vis spectrometric titration experiments showed that the content of α‐CD in the three‐component complexes was less than the feed amount and it was difficult for all the PABA units in the complexes to further form complexes with α‐CD. The obtained three‐component supramolecular complexes exhibited thermoresponsive properties in water. Increasing the α‐CD concentration led to a sharp increase in the cloud point temperature (T_cp) at the beginning, but after the [α‐CD]/[PABA] ratio was in the region of 1.3–1.6, the T_cp increased gradually When the concentration of α‐CD was low, a higher concentration of PABA led to a lower T_cp, however, the opposite was observed when the concentration of α‐CD was high. For the three‐component complex, increasing the α‐CD concentration at pH≈7 or at pH≈9 led to different T_cp temperatures. In the low α‐CD concentration range, adjusting the pH from ≈7–≈9 resulted in an increase in the T_cp, similar but not so pronounced as that of the two‐component system of HPEI‐IBAm/[PABA]. When the concentration of α‐CD was high, adjusting the pH from ≈7–≈9 decreased the T_cp; this observation is different to that of the two‐component system of HPEI‐IBAm/[PABA]. Reversible trans‐to‐cis photoisomerization of azobenzene units in the complexes occurred, following irradiation with UV or visible light. Trans‐to‐cis isomerization of azobenzene units decreased the T_cp. However, this result differed to that of the two‐component system of HPEI‐IBAm/PABA.