“Click” coupling between alkyne‐decorated multiwalled carbon nanotubes and reactive PDMA‐PNIPAM micelles

Covalent functionalization of alkyne‐decorated multiwalled carbon nanotubes (MWNTs) with a well‐defined, azide‐derivatized, thermoresponsive diblock copolymer, poly(N,N‐dimethylacrylamide)‐poly(N‐isopropylacrylamide) (PDMA‐PNIPAM) was accomplished by the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition. It was found that this reaction could simultaneously increase the molecular size and bonding density of grafted polymers when PDMA‐PNIPAM micelles were employed in the coupling system. On the other hand, attachment of molecularly dissolved unimers of high‐molecular weight onto the nanotube resulted in low‐graft density. The block copolymer bearing azide groups at the PDMA end was prepared by reversible addition–fragmentation transfer polymerization, which formed micelles with a diameter of ～40 nm at temperatures above its critical micelle temperature. Scanning electron microscopy was utilized to demonstrate that the coupling reaction was successfully carried out between copolymer micelles and alkyne‐bearing MWNTs. FTIR spectroscopy was utilized to follow the introduction and consumption of alkyne groups on the MWNTs. Thermogravimetric analysis indicated that the functionalized MWNTs consisted of about 45% polymer. Transmission electron microscopy was utilized to image polymer‐functionalized MWNTs, showing relatively uniform polymer coatings present on the surface of nanotubes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7187–7199, 2008     

Tuning Optical Properties and Photocatalytic Activities of Carbon‐based “Quantum Dots” Through their Surface Groups

We report recent progress in tuning optical properties and photocatalytic activities of carbon‐based quantum dots (carbon‐based QDs) through their surface groups. It is increasingly clear that the properties of carbon‐based QDs are more dependent on their surface groups than on their size. The present challenge remains as to how to control the type, number, and conformation of the heterogeneous groups on the surface of carbon‐based QDs when considering their target applications. By reviewing the related achievements, this personal account aims to help us understand the roles different surface groups play in tuning the properties of carbon‐based QDs. A number of significant accomplishments have demonstrated that surface groups possess strong power in engineering electronic structure and controlling photogenerated charge behaviors of carbon‐based QDs. However, effective strategies for modifying carbon‐based QDs with diverse heterogeneous groups are still needed.     

Tetrazine Carbon Nanotubes for Pretargeted In Vivo “Click‐to‐Release” Bioorthogonal Tumour Imaging

The bioorthogonal inverse‐electron‐demand Diels–Alder (IEDDA) cleavage reaction between tetrazine and trans‐cyclooctene (TCO) is a powerful way to control the release of bioactive agents and imaging probes. In this study, a pretargeted activation strategy using single‐walled carbon nanotubes (SWCNTs) that bear tetrazines (TZ@SWCNTs) and a TCO‐caged molecule was used to deliver active effector molecules. To optimize a turn‐on signal by using in vivo fluorescence imaging, we developed a new fluorogenic near‐infrared probe that can be activated by bioorthogonal chemistry and image tumours in mice by caging hemicyanine with TCO (tHCA). With our pretargeting strategy, we have shown selective doxorubicin prodrug activation and instantaneous fluorescence imaging in living cells. By combining a tHCA probe and a pretargeted bioorthogonal approach, real‐time, non‐invasive tumour visualization with a high target‐to‐background ratio was achieved in a xenograft mice tumour model. The combined advantages of enhanced stability, kinetics and biocompatibility, and the superior pharmacokinetics of tetrazine‐functionalised SWCNTs could allow application of targeted bioorthogonal decaging approaches with minimal off‐site activation of fluorophore/drug.     

“Metal‐Free” Catalytic Oxygen Reduction Reaction on Heteroatom‐Doped Graphene is Caused by Trace Metal Impurities

The oxygen reduction reaction (ORR) is of high industrial importance. There is a large body of literature showing that metal‐based catalytic nanoparticles (e.g. Co, Mn, Fe or hybrid Mn/Co‐based nanoparticles) supported on graphene act as efficient catalysts for the ORR. A significant research effort is also directed to the so‐called “metal‐free” oxygen reduction reaction on heteroatom‐doped graphene surfaces. While such studies of the ORR on nonmetallic heteroatom‐doped graphene are advertised as “metal‐free” there is typically no sufficient effort to characterize the doped materials to verify that they are indeed free of any trace metal. Here we argue that the claimed “metal‐free” electrocatalysis of the oxygen reduction reaction on heteroatom‐doped graphene is caused by metallic impurities present within the graphene materials.     

Functionalization of multiwalled carbon nanotubes with polyesters via bergman cyclization and “grafting from” strategy

In this work, pristine multiwalled carbon nanotubes (MWNTs) were functionalized by utilizing the free radicals generated through Bergman cyclization of enediyne containing compounds 3 . Polyesters were subsequently grafted from the surface of MWNTs through ring‐opening polymerization of ε‐caprolactone or lactide initiated by free hydroxy groups generated after hydrolysis of ester groups. Functionalized MWNTs were characterized with a variety of techniques, including TGA, NMR, IR, UV–vis, TEM, and Raman spectroscopy. After surface modification, MWNTs showed good solubility in common organic solvents and polymer solutions. Fabrication of MWNTs polymer nanocomposites was revealed through electrospinning with polycaprolactone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Green Synthesis of Red‐Emitting Carbon Nanodots as a Novel “Turn‐on” Nanothermometer in Living Cells

Temperature measurements in biology and medical diagnostics, along with sensitive temperature probing of living cells, is of great importance; however, it still faces significant challenges. Herein, a novel “turn‐on” carbon‐dot‐based fluorescent nanothermometry device for spatially resolved temperature measurements in living cells is presented. The carbon nanodots (CNDs) are prepared by a green microwave‐assisted method and exhibit red fluorescence (λ_em=615 nm) with high quantum yields (15 %). Then, an on–off fluorescent probe is prepared for detecting glutathione (GSH) based on aggregation‐induced fluorescence quenching. Interestingly, the quenched fluorescence could be recovered by increasing temperature and the CNDs–GSH mixture could behave as an off–on fluorescent probe for temperature. Thus, red‐emitting CNDs can be utilized for “turn‐on” fluorescent nanothermometry through the fluorescence quenching and recovery processes, respectively. We employ MC3T3‐E1 cells as an example model to demonstrate the red‐emitting CNDs can function as “non‐contact” tools for the accurate measurement of temperature and its gradient inside a living cell.     

Template‐ and Metal‐Free Synthesis of Nitrogen‐Rich Nanoporous “Noble” Carbon Materials by Direct Pyrolysis of a Preorganized Hexaazatriphenylene Precursor

The targeted thermal condensation of a hexaazatriphenylene‐based precursor leads to porous and oxidation‐resistant (“noble”) carbons. Simple condensation of the pre‐aligned molecular precursor produces nitrogen‐rich carbons with C₂N‐type stoichiometry. Despite the absence of any porogen and metal species involved in the synthesis, the specific surface areas of the molecular carbons reach up to 1000 m² g^?1 due to the significant microporosity of the materials. The content and type of nitrogen species is controllable by the carbonization temperature whilst porosity remains largely unaffected at the same time. The resulting noble carbons are distinguished by a highly polarizable micropore structure and have thus high adsorption affinity towards molecules such as H₂O and CO₂. This molecular precursor approach opens new possibilities for the synthesis of porous noble carbons under molecular control, providing access to the special physical properties of the C₂N structure and extending the known spectrum of classical porous carbons.     

“Click” generation of a conjugated polymer library for SWNT dispersion

Noncovalent functionalization of single‐walled carbon nanotubes (SWNTs) with conjugated polymers enhances SWNT processability and allows for selective dispersion of various SWNT species. Selective dispersions can be obtained by tuning the nature of the polymer, which can involve using various polymer backbones or side‐chains. However, a clear understanding of selectivity determinants is elusive, as the degree of polymerization (DP) has a large effect on SWNT selectivity. Additionally, preparing libraries of conjugated polymers with varying functionality while keeping DP consistent is difficult. Here, we report the utilization of a strained cyclooctyne‐containing conjugated polymer that serves as a versatile scaffold, enabling systematic preparation of a small library of conjugated polymers with different side‐chain functionality, while maintaining a consistent DP. The resulting polymers were used as dispersants for SWNTs, forming supramolecular polymer‐SWNT complexes that were characterized by UV‐Vis‐NIR absorption and Raman spectroscopy. In the series of polymers, we were able to probe the effect of small changes within the side chains, such as the incorporation of a carbonyl group or an aromatic unit, on the quality of the polymer‐SWNT dispersion. The results of these studies provide new insight into the factors that dictate the ability of a polymer to form strong interactions with SWNTs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2053–2058     

Insights into the Temperature‐Dependent “Breathing” of a Flexible Fluorinated Metal–Organic Framework

The framework expansion and contraction upon carbon dioxide uptake was studied in a partially fluorinated metal–organic framework, FMOF‐2. The results show framework expansion and contraction (breathing) as a function of pressure and temperature. Even at temperatures as low as ?30 °C, two phase transitions seem to take place with a pressure step (corresponding to the second transition) that is greatly dependent on temperature. This behavior is described by the model proposed by Coudert and co‐workers showing that the material seems to undergo two phase transitions that are temperature‐dependent. The isosteric heats of adsorption at high pressures show a minimum that is concurrent with the region of CO₂ loadings where the second pressure step occurs. It was deduced that these lower enthalpy values are a consequence of the energy cost related to the expansion or reopening of the framework. Lastly, the large and reversible breathing behavior may be a product of the combination of the high elasticity of zinc (II) coordination and the apparent high flexibility of the V‐shaped organic building block.     

Metallic Impurities within Residual Catalyst Metallic Nanoparticles Are in Some Cases Responsible for “Electrocatalytic” Effect of Carbon Nanotubes

It′s what′s on the inside that counts : In some cases, the metallic impurities within residual catalyst metallic nanoparticle impurities, which remain in carbon nanotubes even after their purification, are responsible for the “electrocatalytic” properties of carbon nanotubes. This is demonstrated by using double‐walled carbon nanotubes (DWCNTs) containing cobalt residual catalyst nanoparticle impurities, which themselves contain iron‐based impurities.

     

Nature‐Inspired Environmental “Phosphorylation” Boosts Photocatalytic H2 Production over Carbon Nitride Nanosheets under Visible‐Light Irradiation

Inspired by the crucial roles of phosphates in natural photosynthesis, we explored an environmental “phosphorylation” strategy for boosting photocatalytic H₂ production over g‐C₃N₄ nanosheets under visible light. As expected, a substantial improvement was observed in the rate of H₂ evolution to 947 μmol h^?1, and the apparent quantum yield was as high as 26.1 % at 420 nm. The synergy of enhanced proton reduction and improved hole oxidation is proposed to account for the markedly increased activity. Our findings may provide a promising and facile approach to highly efficient photocatalysis for solar‐energy conversion.