无纺布上的偕胺肟基团鳌合物的氧化还原反应的研究

采用各种分析方法系统研究了含偕胺肟基因维尼无纺布与Ａｎ（３＋）进行氧化还原反应时的化学结构变化、氧化还原与鳌合吸附的关系以及还原产物的结晶结构和形态．结果表明，含偕胺肟基无纺布与Ａｕ（３＋）反应时，开始主要是偕胺肟基被氧化成为酰胺基．此外，有部分偕胺基因被氧化成为羧基．Ａｎ（３＋）被还原的同时生成约相等当量的氢离子．反应后期或反应温度高时，氢离子生成量增大．实验结果还表明，在反应起始阶段，Ａｕ（３＋）与偕胺肟基因会发生鳌合作用．还原生咸的单质Ａｎ形成“玫瑰花”状的小晶粒粘附于无纺布纤维表面．     

用含偕胺肟基螯合纤维吸附、还原Au^3＋的研究（Ⅱ）：—氧化还原过程的初步研究

讨论了含偕胺肟基螯合纤维对Au^3 的还原过程及螯合与还原反应间的关系。结果表明，含偕胺肟基螯合纤维在吸附Au^3 的过程中，功能基螯合Au^3 之后再将其部分还原成单质金，而偕胺肟基则先被氧化成酰氨基进而变成羧基，吸附了Au^3 的纤维经径高温灼烧后合理使可得到海绵金。     

螯合纤维的研究：Ⅱ.含偕胺肟基螯合纤维的吸附性能

本文系统地研究了通过枝共聚和偕胺肟化反应制备的以聚乙烯醇缩甲醛（ＰＶＦ）无纺布为基体的含偕胺肟基螯合纤维对碱土，过渡贵重，稀土和放射性金属离子的螯合吸附行为，测定了在不同温度下的吸附速率曲线。并且首次发现这种螯合基团有氧化－还原性性质，能将高价金属离子如Ａｕ＾３＾＋还原成价态，即还原成元素金。     

笼形聚偕胺肟树脂的研究──(NH_4)_2IrCl_6在碱式树脂上吸附与还原过程

超当量吸附是碱式笼形聚偕胺肟树脂（BCAO）吸附氯铱酸铵的特征之一．被吸附的氯铱酸铵与浴液中树脂的偕胺肟基的摩尔比为3．0，表明物理吸附在吸附过程中起主导作用．吸附结果是氯铱酸铵和偕胺肟基结合而成1：1络合物，并且发生了氧化还原反应，后者从扫描电镜观察得到证实。     

纤维素基磁性聚偕胺肟树脂的研究——溴在树脂上的氧化还原反应

用羟胺作模拟物与溴反应，测定了吸溴前后的酸式纤维素基磁性聚偕胺肟树脂的红外光谱，结合Ｆｒｅｕｎｄｌｉｃｈ及Ｌａｎｇｍｕｉｒ等温吸附方程的分析和吸溴前后树脂重量变化的测定，证明纤维素基磁性聚偕胺肟树脂吸溴后随即发生氧化还原反应，偕胺肟基被氧化为羧基，溴则被还原为溴离子，在溴浓度较高时，纤维素葡萄糖单元上的羟基被溴代或被氧化成羰酸，若葡萄糖苷键氧化断裂，将导致大分子降解。     

纤维素基磁性聚偕胺肟树脂研究：HAuCl4在树脂上的吸附与还原

研究了ＨＡｕＣｌ４在碱式纤维素基磁性聚偕胺肟树脂上的吸附动力学。吸附容量与吸附时间关系在初吸附的３０ｍｉｎ内可表示为Ｑ＝０．６４ｔ＾０．４。粒内扩散是吸附速度的控制阶段。在吸附过程中，同时发生氧化还原反应，Ａｕ（０）以不同聚集态附着在树脂表面。     

螯合纤维的研究.Ⅳ.聚丙烯睛纤维偕胺肟化反应的研究

本文探讨了由市售聚丙烯腈纤维制备含偕胺肟基螯合纤维的可能性,研究了纤维偕胺肟化反应的特点。结果表明,通过对聚丙烯腈纤维的偕胺肟化处理可以获得机械性能较好的含偕胺肟基螯合纤维,该纤维对于Au~(3+)具有相当高的吸附量。在影响偕胺肟化反应的诸因素中,温度尤为重要,当温度低于纤维蕴晶区被拆散所对应的温度时,腈基转化率较低;当温度高于蕴晶区被拆散所对应的温度时,腈基转化率迅速提高,但机械性能开始劣化。不断提高反应试剂浓度或延长时间,则腈基转化率初期提高较快随后趋于平缓。     

纤维素基磁性聚偕胺肟树脂的研究──(NH_4)_2IrCl_6在树脂上的吸附

碱式纤维素基磁性聚偕胺肟树脂（ＢＭＡＯ）吸附（ＮＨ４）２ＩｒＣｌ６是快速过程，属超当量吸附。吸附结果生成ＡＯ－Ｉｒ和ＡＯ２－Ｉｒ３络合物，随后Ｉｒ（Ⅳ）被偕胺肟基还原为Ｉｒ（０），聚集成球状晶簇附着在树脂表面。     

纤维素基磁性聚偕肟树脂的研究：—（NH4）2IrCl6在树脂上的咐吸

碱式纤维系基磁性聚偕胺肟树脂（ＢＭＡＯ）吸附（ＮＨ４）ＩｒＣｌ６是快速过程，属超当量吸附。吸附结果生成ＡＯ－Ｉｒ和ＡＯ２－Ｉｒ３络合物，随后Ｉｒ（Ⅳ）被偕胺肟基还原为Ｉｒ（０），聚集成球状晶簇随着在树脂表面。     

N-2-亚甲基-噻酚-二茂铁基芳胺衍生物的合成、晶体结构及电化学性质

以邻、间、对-二茂铁苯胺为原料, 合成了含噻酚的二茂铁苯基席夫碱衍生物并还原得到N-2-亚甲基-噻酚-二茂铁基芳胺衍生物，通过元素分析，IR，UV，¹H NMR和X-射线单晶衍射等分析手段，确证了标题化合物的组成和结构，单晶结构解析表明，化合物2c属于单斜晶系，P2/n空间群。量化计算结果证明，化合物2c在晶体中的结构并不是它的最稳定结构；其HOMO轨道主要由Fe原子及茂环上C的原子轨道组成的；电化学实验证明所得邻、间、对化合物的电化学性质相似，氧化还原峰对应于二茂铁的氧化还原过程，Fc⁺ + e^-←→Fc；说明化合物中的二茂铁基所处的化学环境相同，苯环上取代基位置的不同，对化合物在电极表面的扩散系数影响不大, 但对反应速率常数则有较大的影响。     

Electrochemical Properties of Hydroxyphenazine-Coated Electrodes

Glassy carbon and gold electrodes were coated with 1-hydroxyphenazine, and the electrochemical properties of these electrodes were tested using them as a rotating disc electrode to reduce Ru (bipy)₃³⁺, Fe³⁺, quinoxaline, O₂, and to oxidize Eu²⁺. The fixed redox couple can be reversibly reduced and oxidized, and acts as an intermediate medium for the electron transfer. For example the Ru(bipy)₃³⁺ (E_1/2= 1010 mV vs. SCE. (saturated calomel electrode) on a glassy carbon electrode in 1M H₂SO₄) is only reduced at 50 mV, whereas the oxidation of Eu²⁺ (E_1/2= ?460 mV vs. SCE. on a Hg-electrode in 1M HCl) takes place at ? 100 mV. The heterogeneous rate constant depends on the second order reaction between the attached coating and the redox couple in solution. Depending on this rate constant, selectivity of the electrode is observed.     

Characterization of titanium silicalite using TS-1-modified carbon paste electrodes

Cyclic voltammetry has been used to characterize the redox system Ti⁴⁺/Ti³⁺ inside the channels of the titanosilicalite TS-1. Ti⁴⁺ ions, which are believed to be incorporated in the zeolite framework, can easily be reduced and oxidized. The charge imbalance resulting from the reduction of Ti⁴⁺ to Ti³⁺ is compensated by the electrolyte cations migrating through the porous structure of the material. The intensity of the electrochemical current is proportional to the fraction of titanium atoms substituting silicon atoms in the lattice.     

Adsorption of UO2+2 by polyethylene adsorbents with amidoxime,carboxyl, and amidoxime/carboxyl group

The polyethylene (PE) adsorbents were prepared by a radiation-induced grafting of acrylonitrile (AN), acrylic acid (AA), and the mixture of AN/AA onto PE film, and by subsequent amidoximation of cyano groups of poly-AN graft chains. With an increase of AA composition in AN/AA monomer mixture, the water uptake of the grafted polyethylene film increased. In AN/AA mixture, the maximum adsorption of UO²⁺₂ was observed in the adsorbent with a ratio of AN/AA (50/50, mol%) in copolymer. The amidoxime, carboxyl, and amidoxime/carboxyl groups onto PE acted as a chelating site for the selected UO²⁺₂. The complex structure of polyethylene with three functional groups and UO²⁺₂ was confirmed by Fourier Transform Infrared (FTIR) spectroscopy.     

Reduction of hexavalent chromium at solid electrodes in acidic media: reaction mechanism and analytical applications

The electrochemical detection of hexavalent chromium species was investigated. It was found that Cr(VI) can undergo chemically irreversible reduction in acidic solutions at gold, glassy carbon and boron-doped diamond electrodes. The process was found to be diffusionally controlled at all three electrodes studied. The response obtained at a gold electrode towards the reduction of chromium(VI) produced an electrochemically reversible wave in contrast to those recorded at glassy carbon and boron-doped diamond electrodes. The analytical response of the hexavalent species was studied at gold electrodes in the presence of common environmental interferences: Ni²⁺, Cu²⁺, Fe³⁺, Cr³⁺ and Triton X-100 (surfactant), with an LoD of 4.3 μM obtained in the presence of 5 mM Cr(III).     

Electrochemical Characterization of the Self-Assembled Monolayer of 8-Mercaptoquinoline on Polycrystalline Gold Electrode

Self-assembled monolayer of 8-mercaptoquinoline (MQ) on the surface of gold from MQ dilute ethanolic solutions is investigated by electrochemical methods. Some aqueous redox probes, such as ferrocene carboxylic acid and Fe(CN)₆ ^4–/3– can sufficiently diffuse into the monolayer because significant diffusion-limited current peaks are observed when the redox reactions take place, showing that the monolayer is very loosely packed or dominated by defects. However, the study on the electron transfer of other aqueous probes, such as Cu²⁺ and Ru(NH₃)₆ ^3+/2+, confirm that the monolayer can block the electron transfer on the gold electrode surface rather effectively for its low ratio of pinhole defects. These studies show that the MQ monolayer on the electrode can provide an excellent barrier for penetration of some probes but cannot resist the penetration of other probes effectively. The unusual properties of the self-assembled monolayers are attributed to the entity of the very large heterocyclic moiety.     

The electrocrystallization of nickel on vitreous carbon A kinetic and structural study of nucleation and coalescence

FeOOH deposition films were formed on gold electrodes by polarization in an electrolyte containing Fe²⁺. The time dependence of the formation current suggests a diffusion-controlled formation process. The oxidation of Fe(CN)₆^4? at FeOOH films shows no Tafel-like behavior. It is assumed that the Fe²⁺ to form the film, as well as the Fe(CN)₆^4? to be oxidized, have to diffuse through an adherent, strongly hydrous layer of Fe(OH)₃ to the surface of FeOOH.     

Solution phase electron transfer versus bridge mediated electron transfer across carboxylic acid terminated thiols

Self-assembled monolayers (SAMs) of thiols with carboxylic acid terminal groups were formed on gold substrates. The electron transfer characteristics of redox species on the above SAM-modified electrodes were studied in acid and neutral media with the help of voltammetry under two different conditions: (1) solution phase electron transfer and (2) bridge mediated electron transfer. Two redox systems, viz., [Fe(CN)₆]^4-/3− and Ru[(NH₃)₆]^2+/3+ were chosen for the solution phase study. Investigations of bridge mediated electron transfer were carried out by functionalising the SAM with redox moieties and then studying their redox behaviour. For this study, ferrocene carboxylic acid and 1,4-diamino anthraquinone were used and they were linked to carboxylic acid terminated thiols by covalent linkage. The voltammetric results with mercaptoundecanoic acid SAM demonstrate the difference in behaviour between solution phase and bridge mediated electron transfer processes.     

Synthesis of 3,5-disubstituted 1,2,4-oxadiazoles using ionic liquid-phase organic synthesis (IoLiPOS) methodology

New 3,5-disubstituted 1,2,4-oxadiazoles were synthesized in five steps by ionic liquid-phase organic synthesis (IoLiPOS) methodology. The strategy involved the preparation of amidoxime from the ionic liquid-phase bound arylnitrile. Addition of various carboxylic acid to the amidoxime produced the expected 3,5-disubstituted 1,2,4-oxadiazoles via the stable O-acyl amidoxime intermediate grafted on the ionic liquid-phase. The 1,2,4-oxadiazoles were easily cleaved by transesterification under mild reaction conditions in high purity with good overall yields. The structures of the intermediates in each step were verified by routine spectroscopic analysis (¹H, ¹³C NMR, and HRMS).