衍生化环糊精键合固定相色谱保留和手性识别机理的研究(Ⅰ)

合成了苯基氨基甲酸酯衍生化β-环糊精键合固定相, 14个α-氨基膦酸酯类化合物首次在该固定相和商品化的(S)-(+)-萘乙基氨基甲酸酯衍生化β-环糊精固定相上进行液相色谱手性拆分. 通过定量结构-对映异构体保留关系对比研究了两种不同的环糊精类固定相上可能的色谱保留和手性识别机理.     

衍生化环糊精键合固定相色谱保留和手性识别机理的研究(Ⅱ)

合成了苯基氨基甲酸酯衍生化β-环糊精键合固定相CSP1和CSP2，在正相色谱条件下，一系列α-氨基膦酸酯化合物首次在这类衍生化β-环糊精固定相上实现了手性拆分。探索运用定量结构-对映异构体选择性保留关系的方法，将对映异构体的色谱保留和溶质子描述参数进行相关性联系建立定量方程，对比研究了该类苯基氨基甲酸酯生化β-环糊精键合固定相上可能的液相色谱保留和手性识别机理。     

衍生化环糊精键合固定相对N-苄氧甲酰基-α-氨基膦 酸酯化合物色谱保留和手 性识别机理的研究

正相条件下,一系列N-苄氧甲酰基-α-氨基膦酸二苯酯化合物首次在苯基氨基甲酸酯衍生化β环糊精键合硅胶固定相上实现了高效液相色谱手性拆分,结合热力学模型,对手性分离过程的热力学行为进行了讨论。探索运用定量结构-对映异构体选择性保留关系的方法,将对映异构体的色谱保留和溶质分子描述参数相关性闻系建立定量方程,从超热力学模型的角度研究了色谱保留和手性识别机理。     

扁桃酸及其类似物在全甲基环糊精固定相上的手性拆分

在全甲基β－环糊精（ＰＭＢＣＤ）和全甲基γ－环糊精（ＰＭＧＣＤ）手性固定相上,考察了扁桃酸酯、α－甲氧基扁桃酸酯、２－羟基－３－苯基丙酸酯和２－羟基－４－苯基丁酸乙酯的气相色谱手性分离行为。结果表明,所有研究的羟基羟基羧酸酯均可以在ＰＭＣＤ手性固定相上得到很好的手性分离,而ＰＭＧＣＤ对所研究的对映体没有任何手性拆分能力。结合和学参数,探讨了手性诉分机理。     

高效液相色谱法直接分离硒代缩水甘油醚对映异构体

用高效液相色谱晃在直链淀粉－三（苯基氨基甲酸酯）涂敷型手性固定相上直接拆分了７种新型外消旋硒代缩水甘油醚,考察了流动相组成、样品结构对保留和拆分的影响。     

正相条件下温度和流速对衍生化环糊精键合手性高效液相色 …

合成了苯基氨基甲酸酯衍生化的β－环糊精键合固定相,９个α氨基膦酸酯类化合物首次在环糊精类固定相上进行了有效拆分,研究了温度和流速对异构体选择性的影响,讨论了可能的手性识别机理。     

衍生化β-环糊精手性固定相高效液相色谱法拆分米那普仑对映体及其分离机制

建立了新型抗抑郁药米那普仑在环糊精手性固定相上的高效液相色谱拆分方法。在反相色谱条件下采用未衍生化β-环糊精(Cyclobond I 2000)、乙酰基-β-环糊精(AC-β-CD)、2,3-二甲基-β-环糊精(DM-β-CD)、3,5-二甲基苯基氨基甲酸酯-β-环糊精(DMP-β-CD)4种手性柱分离米那普仑对映体。考察了固定相、流动相比例、pH、流速和柱温对拆分的影响。利用分子对接和结合能计算方法,研究米那普仑分子与AC-β-CD的对接过程,探讨其可能的分离机制。优化后的拆分条件如下:固定相为乙酰基-β-环糊精手性柱Astec CYCLOBONDTMI 2000 AC(25 cm×4.6 mm,5μm),流动相为乙腈-0.1%(体积分数)pH 5.0醋酸三乙胺溶液(TEAA)(5∶95,v/v),流速为0.4mL/min,柱温为25℃,检测波长为220 nm。在此条件下,米那普仑对映体获得快速拆分,分离度(Rs)为1.74,理论塔板数为10 125。分子模拟结果表明引起手性识别的作用力主要是环糊精衍生化的乙酰基导致的氢键作用差异。该方法快速、高效、重现性好。     

全衍生化羟丙基-β-环糊精固定相的制备及应用

研究了3,5-二甲基苯基异氰酸酯对羟丙基-β-环糊精固定相的手性识别影响.通过异氰酸丙基三乙氧基硅烷作偶联剂,将羟丙基-β-环糊精键合到3-氨丙基硅烷化硅胶上,再用3,5-二甲基苯基异氰酸酯对β-环糊精和硅胶其余羟基进行衍生化,制得一种新型的3,5-二甲基苯基氨基甲酸酯全衍生化羟丙基-β-环糊精键合硅胶手性固定相.在反...     

新型靛红衍生化β-环糊精键合SBA-15液相色谱固定相的制备与表征

利用靛红的羰基与β-环糊精单取代乙二胺的缩合反应,合成得到种靛红衍生化β-环糊精Schiff碱类化合物。以3-异氰酸丙基三乙氧基硅烷为偶联剂,将其键合到自制的有序介孔二氧化硅材料SBA-15表面,制得种新型的靛红衍生化β-环糊精键合SBA-15液相色谱固定相(ISCDP)。分别对β-环糊精衍生物、SBA-15及固定相进行必要的结构表征。在反相色谱条件下,以卤代尿嘧啶类极性化合物和二取代苯位置异构体为探针,评价新固定相的基本色谱性能。在极性有机溶剂和反相模式下,将新固定相分别用于β-受体阻滞剂药物和丹磺酰化氨基酸对映体的拆分,探讨了相关色谱分离机理。实验表明,靛红吲哚环的引入,增强了环糊精类固定相对卤代尿嘧啶的反相色谱分离能力,分析时间小于7 min。固定相分离硝基苯胺、氨基苯酚和苯二酚的位置异构体时也表现出较高的立体选择性,其中对位异构体均后被洗脱,这与包结作用相关;靛红衍生化β-环糊精配体也提高了固定相的手性分离能力,除疏水作用外,靛红衍生化β-环糊精配体还能提供偶极、氢键、π-π和包结等作用,多种协同作用力有利于提高新固定相的手性和非手性分离的选择性。SBA-15作为键合基质,其有序的孔结构有利于保持色谱柱的良好渗透性和小的传质阻力,在快速高效分离分析中具有应用潜能。     

用离子对色谱分离氨基酸衍生物的对映体

通过在由（Ｓ）－（Ｎ）－（２萘基）丙氨酸衍生而成的“刷型”手性固定相上采用离子对色谱分离氨基酸的３,５－二硝基苯甲酰衍生物,探讨了非手性离子对试剂的浓度对溶质保留和选择性的影响。使用甲醇与磷酸盐缓冲溶液组成的溶剂为流动相,考察了甲醇含量对手性分离的影响,另外,通过在不同构型的和性固定相上做对照实验,证明在结构相同、构型相反的手性固定相上,对映体的出峰顺序是相反的。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.