超支化铬系催化剂的合成及乙烯齐聚性能研究

以正辛胺和十二胺为原料,分别制备了两种超支化PNP配体,通过引入金属铬活性位点的方法合成了具有不同烷基链长度的超支化PNP铬系催化剂.采用红外光谱(IR)、核磁共振磷谱(~(31)P-NMR)、核磁共振氢谱(~1H-NMR)、紫外光谱(UV)和质谱(MS)等表征方法证明合成催化剂的结构与理论结构预测相符.详细考察了催化剂用量、溶剂种类、反应条件以及配合物结构对乙烯齐聚性能的影响.实验结果显示,超支化PNP铬系催化剂在甲苯作溶剂,甲基铝氧烷(MAO)做助催化剂时表现出良好的催化乙烯齐聚性能,产物主要为低碳烯烃.在最佳条件下,催化活性最高可达到1.69×10~5 g·(mol Cr·h)~(-1),己烯和辛烯的选择性为43.3%以上.相同聚合条件下,其催化活性随着端基烷基链长度的增加而下降.     

超支化PAMAM桥联乙烯齐聚用镍系催化剂的合成与表征

以系列直链脂肪胺为核的低代超支化聚酰胺-胺(PAMAM)和水杨醛为原料,通过席夫碱反应制备系列新型超支化PAMAM桥联水杨醛亚胺配体;以无水Ni Cl2为络合试剂,通过络合反应合成系列超支化PAMAM桥联镍催化剂,采用FT-IR和1H NMR证实合成的系列新型配体和镍系催化剂的结构与其理论结构相符.对系列超支化PAMAM桥联镍催化剂催化乙烯齐聚的性能进行了研究,结果表明,超支化PAMAM桥联镍系催化剂配体骨架烷基链长度对其催化活性和选择性影响较小,助催化剂和溶剂影响较大;倍半乙基氯化铝为助催化剂,甲苯为溶剂时,聚合活性较高,产物中C8以上的高碳产物的含量最高;其中以十四胺为核的超支化PAMAM桥联镍催化剂为主催化剂、倍半乙基氯化铝为助催化剂、甲苯为溶剂时,催化乙烯齐聚活性高达1.96×106 g/(mol·h),齐聚产物中C8以上的高碳产物含量为98.77%.     

Ti(Ⅳ)/PNP/MAO体系催化乙烯齐聚的研究

合成了三种PNP配体,并与Ti(Ⅳ)作用形成催化剂,利用核磁共振氢谱、元素分析及质谱对配体及催化剂进行了结构表征。在助催化剂甲基铝氧烷(MAO)存在的条件下,催化乙烯齐聚。试验结果表明:钛(Ⅳ)剂催化活性最高可达2.58×105g/(molTi.h),α-烯烃选择性达80.72%。     

新型树枝状PNP铬催化剂的合成及催化性能

以1.0代聚酰胺-胺(PAMAM)为配体骨架,氯代二苯基膦为原料,通过取代反应合成了1种含有较大空间位阻的新型树枝状PNP配体,再以Cr Cl3(THF)3为络合试剂,通过络合反应合成树枝状PNP铬催化剂.采用傅里叶变换红外光谱(FTIR)、紫外-可见分光光度计(UV-Vis)、核磁共振波谱(NMR)、电喷雾电离质谱(ESI-MS)和元素分析等手段证实合成的新型树枝状PNP配体及其铬催化剂的结构与理论设计的结构一致.以甲基铝氧烷(MAO)为助催化剂,对乙烯齐聚反应进行了研究,考察了溶剂种类、反应温度、反应压力及Al/Cr摩尔比对该催化剂活性和选择性的影响.结果表明,以甲苯为溶剂,MAO为助催化剂,当反应温度为25℃,反应压力为0.9 MPa,Al/Cr摩尔比为500时,该催化剂的活性高达2.15×105g/(mol Cr·h),催化剂对乙烯三聚、四聚反应的选择性共达到36.76%.     

MixMOFs接枝PNP铬系催化剂的合成及催化乙烯齐聚性能

以对苯二甲酸、2-氨基对苯二甲酸和六水合硝酸锌为原料,合成出一种含有氨基的混合金属有机骨架(MixMOFs),然后以MixMOFs、氯代二苯基磷和CrCl_3(THF)_3为原料,依次经后合成修饰法和络合反应,合成出一种新型的MixMOFs接枝PNP铬系催化剂。利用红外光谱、X-射线衍射、扫描电镜、元素分析和电感耦合等离子体质谱等方法对产物的结构进行表征,并考察了催化体系和反应条件对催化乙烯齐聚性能的影响。结果表明,MixMOFs接枝PNP铬系催化剂具有较好的催化乙烯齐聚性能,以环己烷为溶剂、一氯二乙基铝(Et_2AlCl)为助催化剂,当反应温度为25℃、Al/Cr摩尔比为600、乙烯压力为1.0MPa时,该催化剂的活性可达4.33×10~4g/(mol Cr·h),聚合产物主要是C_8以下的低碳烯烃,含量高达90%以上。并且催化剂重复使用3次,活性和选择性没有明显变化,表现出较好的重复利用性。     

新型树枝状桥联镍配合物的合成及催化烯烃齐聚性能

合成了一种N,N-二齿配位的新型树枝状桥联吡啶亚胺配体及其镍配合物,利用元素分析、傅里叶变换红外光谱(FTIR)和电喷雾电离质谱(ESI-MS)对其结构进行了表征.以二氯乙基铝(Et Al Cl2)为助催化剂,考察了树枝状桥联镍配合物催化乙烯齐聚和1-戊烯齐聚的聚合条件对产物分布的影响.结果表明,当聚合时间为60 min,聚合压力为0.5 MPa,Al/Ni摩尔比为150时,乙烯齐聚产物中C10~C14的选择性最高,达到93%,催化活性为0.99×106g/(mol Ni·h);当聚合时间为60 min,Al/Ni摩尔比为300时,1-戊烯齐聚产物中C20的选择性最高为70.5%,催化活性为2.47×105g/(mol Ni·h).该树枝状桥联镍配合物对乙烯齐聚反应和1-戊烯齐聚反应均具有良好的催化活性和较高碳数的齐聚产物选择性.     

地方城市空间要素规划建设时序研究:以清代台湾省为例*

Cr/PNP催化乙烯选择性齐聚反应制短链线性α-烯烃(LAOs)技术是近年来发展极为迅速的研究方向,其中关于反应微观机理的研究对高性能催化剂设计和研发具有重要意义.通过使用量子化学计算与实验相结合的方法,可以获得对催化反应过程更为深刻的认识.我们主要从理论计算研究的角度,总结了铬系催化剂催化乙烯选择性齐聚研究中取得的最新成果.主要内容包括反应过程中催化剂的氧化态[Cr(Ⅰ/Ⅲ) vs Cr(Ⅱ/Ⅳ)],反应路径中单乙烯和双乙烯配位的竞争,配体的空间结构和电子效应,自然键轨道理论(NBO)以及H_2效应对催化体系的影响等.     

The Research of Novel Ti（IV）/PNP/MAO Catalyst System for Ethylene Oligomerization

合成了三种PNP配体,并与Ti（IV）作用形成催化剂,利用核磁共振氢谱、元素分析及质谱对配体及催化剂进行了结构表征。在助催化剂甲基铝氧烷（MAO）存在的条件下,催化乙烯齐聚。试验结果表明：钛（IV）剂催化活性最高可达2．58×105g／（molTi·h）,α-烯烃选择性达80．72％。     

基于[PNP]配体的铬催化剂体系选择性催化乙烯齐聚的研究进展

乙烯选择性三聚和四聚催化反应为制备1-己烯和1-辛烯提供了重要途径.在报道和披露的众多结构和组成的催化剂体系中,我们选择[PNP]配位骨架的铬催化剂体系,对其发展和应用进行了综述.论文以结构与催化性能的关联性为主线,阐述[PNP]骨架以及N和P上取代基的电子和立体空间效应对催化性能的影响.从目前的研究态势来看,[PNP]配位骨架的铬催化剂体系在乙烯选择性齐聚生产1-辛烯等线性α-烯烃方面具有发展潜力.     

新型均相铬系催化剂的制备与催化乙烯齐聚

合成了3种新型的N取代基中含有O/N杂原子的1,3,5-三氮杂环己烷[NNN]型配体,利用氢核磁共振谱(1H NMR)、碳核磁共振谱(13C NMR)及电子轰击质谱(EI-MS)等方法对其进行表征.将[NNN]型配体与Cr(Ⅲ)络合制备相应的均相铬催化剂,采用电喷雾质谱(ESI-MS)及元素分析分别对其进行表征.以甲基烷氧铝(MAO)为助催化剂,考察了反应温度、反应压力及铝铬摩尔比等因素对催化乙烯齐聚催化性能的影响.研究结果表明,在以甲苯为溶剂,反应温度50℃,反应压力0.8 MPa,铝铬摩尔比为500∶1,Cr浓度为2.0×10-4mol/L的反应条件下,取代基为3-二甲氨基丙基的均相铬催化剂的催化活性能够达到15.71×105g/(mol Cr·h),对1-己烯和1-辛烯的选择性达到91.02%,而取代基为3-乙氧基丙基的均相铬催化剂的催化活性比较低,为11.54×105g/(mol Cr·h),但对1-己烯和1-辛烯的选择性较高,达到93.05%.     

Synthesis and application of chromium complexes bearing hyperbranched PNP ligands in the ethylene oligomerization

Series of hyperbranched PNP ligands ( L1 – L3 ) were prepared using three low-generation hyperbranched molecules with the same branching chains and functional groups but different alkyl chain length as backbones in a mixed solvent of acetonitrile and dichloromethane. The chromium complexes ( Cr1 – Cr3 ) were obtained by reacting with CrCl₃(THF)₃ and the corresponding ligands ( L1 – L3 ). Both L1 – L3 and Cr1 – Cr3 were characterized by elemental analysis, Fourier transform infrared and electrospray ionization–mass spectrometry as well as ¹H nuclear magnetic resonance (NMR) and ³¹P NMR measurements in the case of the ligands. When activated with different aluminum co-catalysts, all three chromium complexes were able to catalyze the ethylene oligomerization, but the products of the ethylene oligomerization were mainly dependent on ethylene pressure, co-catalyst and ligand backbone. Upon activation with methylaluminoxane, the catalytic activity and the selectivity of C8 olefin increased with increasing of ethylene pressure for Cr1 , the catalytic activity was 13.83 × 10⁵ g·(mol Cr·h)⁻¹ and the main product was C8 olefin (50.68%) at the ethylene pressure of 4.0 MPa. When activated with diethylaluminium chloride, ethylaluminium dichloride and ethylaluminum sesquichloride, Cr1 showed the lower catalytic activity and the higher selectivity of C4 olefin in toluene. An increase in the length of alkyl chain in the hyperbranched PNP ligand backbone caused a decrease in the catalytic activity and an increase in the selectivity of C8 + olefin. The PNP chromium complexes exhibited higher selectivity for higher carbon number olefins compared with the dendritic PNP chromium complex ( Cr5 ).     

Hyperbranched bisphosphinoamine ligands: synthesis,characterization and application in ethylene oligomerization

Two hyperbranched bisphosphinoamine (PNP) ligands and chromium complexes were synthesized in good yield with 1.0 generation (1.0 G) hyperbranched macromolecules, chlorodiphenylphosphine (Ph₂PCl) and CrCl₃(THF)₃ as raw materials. The hyperbranched PNP ligands and chromium complexes were characterized by FT-IR, ¹H NMR, ³¹P NMR, UV and ESI-MS. Comparing with the chromium complexes, the hyperbranched PNP ligands, in combination with Cr(III), and activation by methylaluminoxane (MAO) in situ generated species with better catalytic performance for ethylene oligomerization. The effect of solvent, chromium source, ligand/Cr molar ratio, reaction temperature, Al/Cr molar ratio and reaction pressure on the catalytic activity and product selectivity were studied. The results showed that with increase of ligand/Cr molar ratio, reaction temperature and Al/Cr molar ratio, the catalytic activity increased at first and then decreased. However, the catalytic activity continuously increased with increase of reaction pressure. Under the optimized conditions, the catalytic system of hyperbranched PNP/Cr(III)/MAO led to catalytic activity of 2.68 × 10⁵ g/(mol Cr·h) and 37.71% selectivity for C₆ and C₈.     

Selective ethylene oligomerization bearing hyperbranched bispyridylamine chromium catalyst

Two new hyperbranched bispyridylamine ligands and multinuclear chromium complexes were synthesized with 1.0?G hyperbranched macromolecules, 2-chloropyridine, 2-chloro-4-methylpyridine and CrCl₃(THF)₃ as raw materials. The structures of hyperbranched ligands and chromium complexes were characterized by UV, FT-IR, ¹H NMR, ESI-MS, and elemental analysis. These hyperbranched chromium complexes were evaluated as catalyst precursors by using MAO as activator in the oligomerization of ethylene. Effects of reaction temperature, reaction pressure, Al/Cr molar ratio, concentration of catalyst, solvent, and the structure of catalysts on the catalytic activity and product selectivity were investigated. The oligomerization results showed that with increase of reaction temperature, reaction pressure, and Al/Cr molar ratio, the catalytic activity increased and then decreased; the catalytic activity continuously decreased as the amount of catalyst increased. The products were mainly based on C₆ and C₈. Under optimized conditions, the catalytic system of hyperbranched NNN/Cr(III)/MAO led to activity of 1.26?×?10⁵ g/(mol·Cr·h) and 63.34% selectivity for C₆ and C₈.     

Synthesis of short straight-chain alkylamine based hyperbranched nickel complexes and their catalytic performance of ethylene oligomerization

Short straight-chain alkylamine based hyperbranched molecules and their corresponding salicylaldimine nickel complexes have been synthesized in high yield and characterized by FTIR, ¹H-NMR and mass spectrometry. The optimal reaction parameters were determined under the catalytic system of methylaluminoxane (MAO) as co-catalyst and toluene as solvent. Under these conditions, the effect of catalyst structure, solvent and co-catalyst were determined. Upon activation of MAO in toluene, ethylene oligomerization products were homogeneous distribution of butene, hexene and octene with trace higher olefin. The same catalytic system under cyclohexane and methyl cyclohexane as solvent, however, produced majority of butene. Under the activation of EtAlCl₂, Et₂AlCl and EASC as co-catalyst in toluene, ethylene oligomerization reaction was tandem with Friedel-Crafts reaction in catalytic system.     

Novel Dendritic PNP Chromium Complexes: Synthesis,Characterization, and Performance on Ethylene Oligomerization

Three dendritic PNP ligands with ethylenediamine, 1,4‐butanediamine, 1,6‐diaminohexane as bridged groups are synthesized in good yields, respectively. Three dendritic PNP chromium complexes ( C1  –  C3 ) are prepared with the ligands and chromium(III ) chloride tetrahydrofuran complex (CrCl₃(THF )₃) as materials. The dendritic PNP ligands and the synthetic chromium complexes are fully characterized by spectroscopic and analytical methods. All chromium complexes activated with methylaluminoxane (MAO ) exhibited moderate activities on ethylene oligomerization (7.90 × 10⁴ – 2.15 × 10⁵ g (mol Cr h)⁻¹] and had better selectivity for C₆ and C₈ oligomer, reaching up to 81%. The chromium complex ( C1 ) activated with diethylaluminium chloride (Et₂AlCl) has higher catalytic activity than the chromium complex C1 activated with MAO , although the chromium complex ( C1 ) activated with Et₂AlCl had lower selectivity for C₆ and C₈ oligomer. The effects of solvent and reaction parameters on ethylene oligomerization are also studied using the chromium complex C1 as pre ‐ catalyst and MAO as co ‐ catalyst. Under optimized conditions ([complex] = 2 μmol, Al/Cr = 500, 25 °C, 0.9 MP a ethylene, 30 min), the catalytic activity of complex C1 in toluene is 2.15 × 10⁵ g (mol Cr h)⁻¹ and the selectivity for C₆ and C₈ oligomer is 36.76%. In addition, the structure of complexes significantly affects both the catalytic activity and the selectivity on ethylene oligomerization.     

超支化双吡啶亚胺铬催化剂的合成及催化乙烯齐聚性能

以1.0代(G)超支化大分子(C₃₈H₅₁N₉O₂)为配体骨架,2-氯-4-甲基吡啶和CrCl₃(THF)₃为原料,依次经过取代和配合反应合成了一种超支化双吡啶亚胺配体及其铬催化剂。 利用紫外-可见光谱(UV-Vis)、傅里叶变换红外光谱(FT-IR)、电喷雾电离质谱(ESI-MS)、核磁共振氢谱(¹H NMR)和元素分析等方法对其进行表征。 结果与理论设计预期一致。 考察了反应温度、乙烯压力、Al与Cr摩尔比(n(Al)/n(Cr))、溶剂及助催化剂种类等因素对催化剂催化乙烯齐聚性能的影响。 结果表明,以甲苯为溶剂,甲基铝氧烷(MAO)为助催化剂,当反应温度为45 ℃,乙烯压力为4 MPa,n(Al)/n(Cr)=300,催化剂用量为7 μmol时,活性可达1.32×10⁵ g/(mol(Cr)·h),C₆和C₈的选择性为59.30%。     

树枝状吡啶亚胺铬催化剂的合成及其催化性能研究

以1. 0代聚酰胺-胺树枝状大分子为配体骨架、吡啶二甲醛为原料,合成了一种新型树枝状吡啶亚胺(DPI)配体,再以CrCl_3·6H_2O为络合试剂,制备DPI-Cr催化剂。采用IR、UV-Vis、MS、元素分析等确证了产物结构。考察溶剂种类、助催化剂种类、反应温度、乙烯压力以及Al/Cr摩尔比对DPI-Cr催化乙烯齐聚性能的影响。结果表明,DPI-Cr催化剂表现出良好的催化活性和烯烃选择性,优化反应条件下,催化效率可达4. 91×10~4g/mol Cr·h,C_6和C_8选择性为73. 90%。     

Neutral nickel oligo- and polymerization catalysts: the importance of alkyl phosphine intermediates in chain termination

An unconventional chain termination reaction has been explored for the SHOP (Shell higher olefin process)-type, anilinotropone, and salicylaldiminato nickel-based oligo- and polymerization catalysts by using density functional theory (DFT). Starting from the tetracoordinate alkyl phosphine complex, the termination reaction was found to involve a rearrangement of the alkyl chain to form a pentacoordinate β-agostic complex, β-hydride elimination, and olefinic chain dissociation and to compete with propagation at sufficiently high phosphine concentration and/or basicity. It provides the first complete and convincing mechanistic rationale for the decreasing chain lengths observed upon increasing phosphine concentration and basicity. The unconventional reaction was found to be a major termination pathway for the SHOP-type catalyst and is very unlikely to lead to branching and olefin isomerization, which is critical for explaining why the SHOP catalyst, in contrast to the anilinotropone and salicylaldiminato catalysts, tends to lead to the oligomerization of ethylene to form linear α-olefins. Based on our results we have proposed a new and extended catalytic cycle for the SHOP-type ethylene oligomerization catalyst. Finally, the importance of the new termination reaction for the SHOP-type catalyst suggests that this reaction may also operate with other ethylene oligomerization nickel catalysts. This prediction was confirmed for a pyrazolonatophosphine catalyst, for which the new termination route was found to be even more facile, which explains the short oligomers produced by this catalyst.