Effect of Halide Anions on the Electroreduction of CO2 to C2H4: A Density Functional Theory Study**

The halide anions present in the electrolyte improve the Faradaic efficiencies (FEs) of the multi-hydrocarbon (C₂₊) products for the electrochemical reduction of CO₂ over copper (Cu) catalysts. However, the mechanism behind the increased yield of C₂₊ products with the addition of halide anions remains indistinct. In this study, we analysed the mechanism by investigating the electronic structures and computing the relative free energies of intermediates formed from CO₂ to C₂H₄ on the Cu (100) facet based on density functional theory (DFT) calculations. The results show that formyl *CHO from the hydrogenation reaction of the adsorbed *CO acts as the key intermediate, and the C−C coupling reaction occurs preferentially between *CHO and *CO with the formation of a *CHO-CO intermediate. We then propose a free-energy pathway of C₂H₄ formation. We find that the presence of halide anions significantly decreases the free energy of the *CHOCH intermediate, and enhances desorption of C₂H₄ in the order of I⁻>Cl⁻>Br⁻>F⁻. Lastly, the obtained results are rationalized through Bader charge analysis.     

Tailoring *H Intermediate Coverage on the CuAl2O4/CuO Catalyst for Enhanced Electrocatalytic CO2 Reduction to Ethanol

The direct electrochemical conversion of CO₂ to multi-carbon products offers a promising pathway for producing value-added chemicals using renewable electricity. However, producing ethanol remains a challenge because of the competitive ethylene formation and hydrogen evolution reactions. Herein, we propose an active hydrogen (*H)-intermediate-mediating strategy for ethanol electroproduction on a layered precursor-derived CuAl₂O₄/CuO catalyst. The catalyst delivered a Faradaic efficiency of 70 % for multi-carbon products and 41 % for ethanol at current density of 200 mA cm⁻² and exhibited a continuous 150 h durability in a flow cell. The intensive spectroscopic studies combined with theoretical calculations revealed that the in situ generated CuAl₂O₄ could tailor *H intermediate coverage and the elevated *H coverage favors the hydrogenation of the *HCCOH intermediate, accounting for the increased yield of ethanol. This work directs a pathway for enhancing ethanol electroproduction from CO₂ reduction by tailoring *H intermediate coverage.     

Promoting CO2 Electroreduction to Multi-Carbon Products by Hydrophobicity-Induced Electro-Kinetic Retardation

Advancing the performance of the Cu-catalyzed electrochemical CO₂ reduction reaction (CO₂RR) is crucial for its practical applications. Still, the wettable pristine Cu surface often suffers from low exposure to CO₂, reducing the Faradaic efficiencies (FEs) and current densities for multi-carbon (C₂₊) products. Recent studies have proposed that increasing surface availability for CO₂ by cation-exchange ionomers can enhance the C₂₊ product formation rates. However, due to the rapid formation and consumption of *CO, such promotion in reaction kinetics can shorten the residence of *CO whose adsorption determines C₂₊ selectivity, and thus the resulting C₂₊ FEs remain low. Herein, we discover that the electro-kinetic retardation caused by the strong hydrophobicity of quaternary ammonium group-functionalized polynorbornene ionomers can greatly prolong the *CO residence on Cu. This unconventional electro-kinetic effect is demonstrated by the increased Tafel slopes and the decreased sensitivity of *CO coverage change to potentials. As a result, the strongly hydrophobic Cu electrodes exhibit C₂₊ Faradaic efficiencies of ≈90 % at a partial current density of 223 mA cm⁻², more than twice of bare or hydrophilic Cu surfaces.     

Co0−Coδ+ Interface Double-Site-Mediated C−C Coupling for the Photothermal Conversion of CO2 into Light Olefins

Solar-driven CO₂ hydrogenation into multi-carbon products is a highly desirable, but challenging reaction. The bottleneck of this reaction lies in the C−C coupling of C₁ intermediates. Herein, we construct the C−C coupling centre for C₁ intermediates via the in situ formation of Co⁰−Co^δ+ interface double sites on MgAl₂O₄ (Co−CoO_x/MAO). Our experimental and theoretical prediction results confirmed the effective adsorption and activation of CO₂ by the Co⁰ site to produce C₁ intermediates, while the introduction of the electron-deficient state of Co^δ+ can effectively reduce the energy barrier of the key CHCH* intermediates. Consequently, Co−CoO_x/MAO exhibited a high C_2–4 hydrocarbons production rate of 1303 μmol g⁻¹ h⁻¹; the total organic carbon selectivity of C_2–4 hydrocarbons is 62.5 % under light irradiation with a high ratio (≈11) of olefin to paraffin. This study provides a new approach toward the design of photocatalysts used for CO₂ conversion into C₂₊ products.     

Surface Adsorbed Hydroxyl: A Double-Edged Sword in Electrochemical CO2 Reduction over Oxide-Derived Copper

Oxide-derived Cu (OD−Cu) featured with surface located sub-20 nm nanoparticles (NPs) created via surface structure reconstruction was developed for electrochemical CO₂ reduction (ECO₂RR). With surface adsorbed hydroxyls (OH_ad) identified during ECO₂RR, it is realized that OH_ad, sterically confined and adsorbed at OD−Cu by surface located sub-20 nm NPs, should be determinative to the multi-carbon (C₂) product selectivity. In situ spectral investigations and theoretical calculations reveal that OH_ad favors the adsorption of low-frequency *CO with weak C≡O bonds and strengthens the *CO binding at OD−Cu surface, promoting *CO dimerization and then selective C₂ production. However, excessive OH_ad would inhibit selective C₂ production by occupying active sites and facilitating competitive H₂ evolution. In a flow cell, stable C₂ production with high selectivity of ∼60 % at −200 mA cm⁻² could be achieved over OD−Cu, with adsorption of OH_ad well steered in the fast flowing electrolyte.     

Boosting Electroreduction of CO2 over Cationic Covalent Organic Frameworks: Hydrogen Bonding Effects of Halogen Ions

We present the first example of charged imidazolium functionalized porphyrin-based covalent organic framework (Co-iBFBim-COF-X) for electrocatalytic CO₂ reduction reaction, where the free anions (e.g., F⁻, Cl⁻, Br⁻, and I⁻) of imidazolium ions nearby the active Co sites can stabilize the key intermediate *COOH and inhibit hydrogen evolution reaction. Thus, Co-iBFBim-COF-X exhibits higher activity than the neutral Co-BFBim-COF, following the trend of F⁻<Cl⁻<Br⁻<I⁻. Particularly, the Co-iBFBim-COF-I⁻ showed nearly 100 % CO₂ selectivity at a low full-cell voltage of 2.3 V, and achieved a high CO₂ partial current density of 52 mA cm⁻² with a turnover frequency of 3018 h⁻¹ at 2.4 V in the anion membrane electrode assembly, which is 3.57 times larger than that of neutral Co-BFBim-COF. This work provides new insight into the importance of free anions in the stabilization of intermediates and decreasing the local binding energy of H₂O with active moiety to enhance CO₂ reduction reaction.     

Designs of Tandem Catalysts and Cascade Catalytic Systems for CO2 Upgrading

Upgrading CO₂ into multi-carbon (C2+) compounds through the CO₂ reduction reaction (CO₂RR) offers a practical approach to mitigate atmospheric CO₂ while simultaneously producing high value chemicals. The reaction pathways for C2+ production involve multi-step proton-coupled electron transfer (PCET) and C−C coupling processes. By increasing the surface coverage of adsorbed protons (*H_ad) and *CO intermediates, the reaction kinetics of PCET and C−C coupling can be accelerated, thereby promoting C2+ production. However, *H_ad and *CO are competitively adsorbed intermediates on monocomponent catalysts, making it difficult to break the linear scaling relationship between the adsorption energies of the *H_ad/*CO intermediate. Recently, tandem catalysts consisting of multicomponents have been developed to improve the surface coverage of *H_ad or *CO by enhancing water dissociation or CO₂-to-CO production on auxiliary sites. In this context, we provide a comprehensive overview of the design principles of tandem catalysts based on reaction pathways for C2+ products. Moreover, the development of cascade CO₂RR catalytic systems that integrate CO₂RR with downstream catalysis has expanded the range of potential CO₂ upgrading products. Therefore, we also discuss recent advancements in cascade CO₂RR catalytic systems, highlighting the challenges and perspectives in these systems.     

Selective CO2 Reduction to Ethylene Mediated by Adaptive Small-molecule Engineering of Copper-based Electrocatalysts

Electrochemical CO₂ reduction reaction (CO₂RR) over Cu catalysts exhibits enormous potential for efficiently converting CO₂ to ethylene (C₂H₄). However, achieving high C₂H₄ selectivity remains a considerable challenge due to the propensity of Cu catalysts to undergo structural reconstruction during CO₂RR. Herein, we report an in situ molecule modification strategy that involves tannic acid (TA) molecules adaptive regulating the reconstruction of a Cu-based material to a pathway that facilitates CO₂ reduction to C₂H₄ products. An excellent Faraday efficiency (FE) of 63.6 % on C₂H₄ with a current density of 497.2 mA cm⁻² in flow cell was achieved, about 6.5 times higher than the pristine Cu catalyst which mainly produce CH₄. The in situ X-ray absorption spectroscopy and Raman studies reveal that the hydroxyl group in TA stabilizes Cu^δ+ during the CO₂RR. Furthermore, theoretical calculations demonstrate that the Cu^δ+/Cu⁰ interfaces lower the activation energy barrier for *CO dimerization, and hydroxyl species stabilize the *COH intermediate via hydrogen bonding, thereby promoting C₂H₄ production. Such molecule engineering modulated electronic structure provides a promising strategy to achieve highly selective CO₂ reduction to value-added chemicals.     

Tweaking Photo CO2 Reduction by Altering Lewis Acidic Sites in Metalated-Porous Organic Polymer for Adjustable H2/CO Ratio in Syngas Production

Herein, we have specifically designed two metalated porous organic polymers ( Zn-POP and Co-POP ) for syngas (CO+H₂) production from gaseous CO₂. The variable H₂/CO ratio of syngas with the highest efficiency was produced in water medium (without an organic hole scavenger and photosensitizer) by utilizing the basic principle of Lewis acid/base chemistry. Also, we observed the formation of entirely different major products during photocatalytic CO₂ reduction and water splitting with the help of the two catalysts, where CO (145.65 μmol g⁻¹ h⁻¹) and H₂ (434.7 μmol g⁻¹ h⁻¹) production were preferentially obtained over Co-POP & Zn-POP , respectively. The higher electron density/better Lewis basic nature of Co-POP was investigated further using XPS, XANES, and NH₃-TPD studies, which considerably improve CO₂ activation capacity. Moreover, the structure–activity relationship was confirmed via in situ DRIFTS and DFT studies, which demonstrated the formation of COOH* intermediate along with the thermodynamic feasibility of CO₂ reduction over Co-POP while water splitting occurred preferentially over Zn-POP .     

Electron-Rich Bi Nanosheets Promote CO2⋅− Formation for High-Performance and pH-Universal Electrocatalytic CO2 Reduction

Electrochemical CO₂ reduction reaction (CO₂RR) to chemical fuels such as formate offers a promising pathway to carbon-neutral future, but its practical application is largely inhibited by the lack of effective activation of CO₂ molecules and pH-universal feasibility. Here, we report an electronic structure manipulation strategy to electron-rich Bi nanosheets, where electrons transfer from Cu donor to Bi acceptor in bimetallic Cu−Bi, enabling CO₂RR towards formate with concurrent high activity, selectivity and stability in pH-universal (acidic, neutral and alkaline) electrolytes. Combined in situ Raman spectra and computational calculations unravel that electron-rich Bi promotes CO₂⋅⁻ formation to activate CO₂ molecules, and enhance the adsorption strength of *OCHO intermediate with an up-shifted p-band center, thus leading to its superior activity and selectivity of formate. Further integration of the robust electron-rich Bi nanosheets into III–V-based photovoltaic solar cell results in an unassisted artificial leaf with a high solar-to-formate (STF) efficiency of 13.7 %.     

Wurtzite CuGaS2 with an In-Situ-Formed CuO Layer Photocatalyzes CO2 Conversion to Ethylene with High Selectivity

We present surface reconstruction-induced C−C coupling whereby CO₂ is converted into ethylene. The wurtzite phase of CuGaS_2. undergoes in situ surface reconstruction, leading to the formation of a thin CuO layer over the pristine catalyst, which facilitates selective conversion of CO₂ to ethylene (C₂H₄). Upon illumination, the catalyst efficiently converts CO₂ to C₂H₄ with 75.1 % selectivity (92.7 % selectivity in terms of R_electron) and a 20.6 μmol g⁻¹ h⁻¹ evolution rate. Subsequent spectroscopic and microscopic studies supported by theoretical analysis revealed operando-generated Cu²⁺, with the assistance of existing Cu⁺, functioning as an anchor for the generated *CO and thereby facilitating C−C coupling. This study demonstrates strain-induced in situ surface reconstruction leading to heterojunction formation, which finetunes the oxidation state of Cu and modulates the CO₂ reduction reaction pathway to selective formation of ethylene.     

Nitrite Electroreduction to Ammonia Promoted by Molecular Carbon Dioxide with Near-unity Faradaic Efficiency

Electrochemical reduction of nitrite (NO₂⁻) offers an energy-efficient route for ammonia (NH₃) synthesis and reduction of the level of nitrite, which is one of the major pollutants in water. However, the near 100 % Faradaic efficiency (FE) has yet to be achieved due to the complicated reduction route with several intermediates. Here, we report that carbon dioxide (CO₂) can enhance the nitrite electroreduction to ammonia on copper nanowire (Cu NW) catalysts. In a broad potential range (−0.7∼−1.3 V vs. RHE), the FE of nitrite to ammonia is close to 100 % with a 3.5-fold increase in activity compared to that obtained without CO_2. In situ Raman spectroscopy and density functional theory (DFT) calculations indicate that CO₂ acts as a catalyst to facilitate the *NO to *N step, which is the rate determining step for ammonia synthesis. The promotion effect of CO₂ can be expanded to electroreduction of other nitro-compounds, such as nitrate to ammonia and nitrobenzene to aniline.     

Pulse and steady‐state radiolysis studies of some homonuclear copper(II) and heteronuclear copper(II)‐molybdenum(VI) peroxo compounds containing a simple peptide molecule

The reactions of e_aq⁻, OH·, CO₂⁻·, and N₃· radicals with some novel homo nuclear and hetero nuclear peroxo peptide complexes viz: copper peroxo glycylglycine, [Cu(O₂)(H₂L)₂]; molybdenum oxoperoxo glycylglycine, [Mo(O)(O₂)₂(H₂L)₂]; Cu,Mo oxoperoxo glycylglycine [CuMo(O)(O₂)(L)₂] and Cu,Mo, oxo glycylglycine, [CuMo(O)₂(L)₂] (H₂L=glycyl glycine) in aqueous solutions were investigated by pulse radiolysis. Three types of reactions were observed: (1) reduction of Cu(II) to Cu(I) by e_aq⁻ and CO₂⁻·, (2) oxidation of Cu(II) to Cu(III) by N₃⁻·, and (3) formation of a radical on H abstraction from the ligand by OH· radical. Rate constants were reported for formation and decomposition of all intermediates. In case of one electron reduced complexes of hetero atoms, CuMo(O)₂L₂ and CuMo(O)(O₂)L₂, prepared via the reduction of the corresponding complexes by e_aq⁻, formation of a new dimer radical anion complex was observed. It is also noteworthy to mention the possibility of the effect of peroxo ligand on intermediate steps during the formation of Cu clusters. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 159–168, 1999     

Accelerated Transfer and Spillover of Carbon Monoxide through Tandem Catalysis for Kinetics-boosted Ethylene Electrosynthesis

Cu-based catalysts have been widely applied in electroreduction of carbon dioxide (CO₂ER) to produce multicarbon (C₂₊) feedstocks (e.g., C₂H₄). However, the high energy barriers for CO₂ activation on the Cu surface is a challenge for a high catalytic efficiency and product selectivity. Herein, we developed an in situ *CO generation and spillover strategy by engineering single Ni atoms on a pyridinic N-enriched carbon support with a sodalite (SOD) topology (Ni-SOD/NC) that acted as a donor to feed adjacent Cu nanoparticles (NPs) with *CO intermediate. As a result, a high C₂H₄ selectivity of 62.5 % and an industrial-level current density of 160 mA cm⁻² at a low potential of −0.72 V were achieved. Our studies revealed that the isolated NiN₃ active sites with adjacent pyridinic N species facilitated the *CO desorption and the massive *CO intermediate released from Ni-SOD/NC then overflowed to Cu NPs surface to enrich the *CO coverage for improving the selectivity of CO₂ER to C₂H₄.     

Single Atom Bi Decorated Copper Alloy Enables C−C Coupling for Electrocatalytic Reduction of CO2 into C2+ Products**

Single atom alloy (SAA) catalysts have been recently explored for promotion of various heterogeneous catalysis, but it remains unexplored for selective electrocatalytic reduction of carbon dioxide (CO₂) into multi-carbon (C₂₊) products involving C−C coupling. Herein we report a single-atomic Bi decorated Cu alloy (denoted as BiCu-SAA) electrocatalyst that could effectively modulate selectivity of CO₂ reduction into C₂₊ products instead of previous C₁ ones. The BiCu-SAA catalyst exhibits remarkably superior selectivity of C₂₊ products with optimal Faradaic efficiency (FE) of 73.4 % compared to the pure copper nanoparticle or Bi nanoparticles-decorated Cu nanocomposites, and its structure and performance can be well maintained at current density of 400 mA cm⁻² under the flow cell system. Based on our in situ characterizations and density functional theory calculations, the BiCu-SAA is found to favor the activation of CO₂ and subsequent C−C coupling during the electrocatalytic reaction, as should be responsible for its extraordinary C₂₊ selectivity.     

Interfacial Water Tuning by Intermolecular Spacing for Stable CO2 Electroreduction to C2+ Products

Electroreduction of CO₂ to multi-carbon (C₂₊) products is a promising approach for utilization of renewable energy, in which the interfacial water quantity is critical for both the C₂₊ product selectivity and the stability of Cu-based electrocatalytic sites. Functionalization of long-chain alkyl molecules on a catalyst surface can help to increase its stability, while it also tends to block the transport of water, thus inhibiting the C₂₊ product formation. Herein, we demonstrate the fine tuning of interfacial water by surface assembly of toluene on Cu nanosheets, allowing for sustained and enriched CO₂ supply but retarded water transfer to catalytic surface. Compared to bare Cu with fast cathodic corrosion and long-chain alkyl-modified Cu with main CO product, the toluene assembly on Cu nanosheet surface enabled a high Faradaic efficiency of 78 % for C₂₊ and a partial current density of 1.81 A cm⁻². The toluene-modified Cu catalyst further exhibited highly stable CO₂-to-C₂H₄ conversion of 400 h in a membrane-electrode-assembly electrolyzer, suggesting the attractive feature for both efficient C₂₊ selectivity and excellent stability.     

Proton Shuttling by Polyaniline of High Brønsted Basicity for Improved Electrocatalytic Ethylene Production from CO2

Hybrid organic/inorganic composites with the organic phase tailored to modulate local chemical environment at the Cu surface arise as an enchanting category of catalysts for electrocatalytic CO₂ reduction reaction (CO₂RR). A fundamental understanding on how the organics of different functionality, polarity, and hydrophobicity affect the reaction path is, however, still lacking to guide rational catalyst design. Herein, polypyrrole (PPy) and polyaniline (PANI) manifesting different Brønsted basicity are compared for their regulatory roles on the CO₂RR pathways regarding *CO coverage, proton source and interfacial polarity. Concerted efforts from in situ IR, Raman and operando modelling unveil that at the PPy/Cu interface with limited *CO coverage, hydridic *H produced by the Volmer step favors the carbon hydrogenation of *CO to form *CHO through a Tafel process; Whereas at the PANI/Cu interface with concentrated CO₂ and high *CO coverage, protonic H⁺ shuttled through the benzenoid -NH- protonates the oxygen of *CO, yielding *COH for asymmetric coupling with nearby *CO to form *OCCOH under favored energetics. As a result of the tailored chemical environment, the restructured PANI/Cu composite demonstrates a high partial current density of 0.41 A cm⁻² at a maximal Faraday efficiency of 67.5 % for ethylene production, ranking among states of the art.     

Carbon-Anchored Molybdenum Oxide Nanoclusters as Efficient Catalysts for the Electrosynthesis of Ammonia and Urea

The electrochemical NO₃⁻ reduction and its coupling with CO₂ can provide novel and clean routes to synthesize NH₃ and urea, respectively. However, their practical application is still impeded by the lack of efficient catalysts with desirable Faradaic efficiency (FE) and yield rate. Herein, we report the synthesis of molybdenum oxide nanoclusters anchored on carbon black (MoO_x/C) as electrocatalyst. It affords an outstanding FE of 98.14 % and NH₃ yield rate of 91.63 mg h⁻¹ mg_cat.⁻¹ in NO₃⁻ reduction. Besides, the highest FE of 27.7 % with a maximum urea yield rate of 1431.5 μg h⁻¹ mg_cat.⁻¹ toward urea is also achieved. The formation of electron-rich MoO_x nanoclusters with highly unsaturated metal sites in the MoO_x/C heterostructure is beneficial for enhanced catalytic performance. Studies on the mechanism reveal that the stabilization of *NO and *CO₂NOOH intermediates are critical for the NH₃ and urea synthesis, respectively.     

Ambient Electrosynthesis of Urea with Nitrate and Carbon Dioxide over Iron-Based Dual-Sites

The development of efficient electrocatalysts to generate key *NH₂ and *CO intermediates is crucial for ambient urea electrosynthesis with nitrate (NO₃⁻) and carbon dioxide (CO₂). Here we report a liquid-phase laser irradiation method to fabricate symbiotic graphitic carbon encapsulated amorphous iron and iron oxide nanoparticles on carbon nanotubes (Fe(a)@C-Fe₃O₄/CNTs). Fe(a)@C-Fe₃O₄/CNTs exhibits superior electrocatalytic activity toward urea synthesis using NO₃⁻ and CO₂, affording a urea yield of 1341.3±112.6 μg h⁻¹ mg_cat⁻¹ and a faradic efficiency of 16.5±6.1 % at ambient conditions. Both experimental and theoretical results indicate that the formed Fe(a)@C and Fe₃O₄ on CNTs provide dual active sites for the adsorption and activation of NO₃⁻ and CO₂, thus generating key *NH₂ and *CO intermediates with lower energy barriers for urea formation. This work would be helpful for design and development of high-efficiency dual-site electrocatalysts for ambient urea synthesis.     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.