Sulfonated PEG-intercalated montmorillonite [(Mt/PEG)-SO<Subscript>3</Subscript>H] as efficient and ecofriendly nanocatalyst for synthesis of α,α′-bis(substituted benzylidene)cycloalkanones

(Montmorillonite/PEG)-SO₃H nanocomposite was successfully prepared for the first time and introduced as a solid acid nanocatalyst. Initially, polyethylene glycol (PEG) polymeric chains were intercalated into interlayer spaces of montmorillonite. The resulting Mt/PEG nanocomposite with good mechanical and thermal stability was chosen as a useful clay mineral/polymer support for further modification with chlorosulfonic acid. Structural characterization of (Mt/PEG)-SO₃H was carried out using X-ray diffraction (XRD) analysis, Brunauer–Emmett–Teller (BET) measurements, Barrett–Joyner–Halenda (BJH) analysis, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Fourier-transform infrared (FT-IR) spectroscopy. The results showed that PEG chains were intercalated into the clay mineral layers and that the Mt/PEG nanocomposite was successfully sulfonated. (Mt/PEG)-SO₃H nanocomposite exhibited high specific surface area and good stability up to around 150 °C, showing excellent potential for application as a recyclable nanocatalyst. (Mt/PEG)-SO₃H was used as an efficient and ecofriendly solid acid nanocatalyst for preparation of α,α′-bis(substituted benzylidene)cycloalkanones under solvent-free conditions, leading to many interesting findings. The excellent conversion values confirm that the catalyst has strong and sufficient acidic sites, which are responsible for its catalytic performance. The reaction under mild conditions (room temperature) with excellent yield, catalyst recyclability (up to ten times), and simple work-up procedure represent useful advantages of (Mt/PEG)-SO₃H for catalysis. Moreover, the reaction could be scaled up to 10 and 15 mmol scales.     

MCM-41-anchored sulfonic acid (MCM-41-SO3H): An efficient heterogeneous catalyst for green organic synthesis

MCM-41-anchored sulfonic acid (MCM-41-SO₃H) used as a solid acid catalyst has been reported in recent years for various synthetic protocols. The superior advantage of MCM-41-SO₃H is that it can be recovered and reused several times without loss of its efficiency. In this tutorial review, we attempt to give an overview of the use of MCM-41-SO₃H as a solid and heterogeneous catalyst in the synthesis of various organic compounds that have industrial and pharmaceutical applications.     

ZSM-5-SO3H as a novel, efficient, and reusable catalyst for the chemoselective synthesis and deprotection of 1,1-diacetates under eco-friendly conditions

Abstract  

ZSM-5 has been modified as supported sulfuric acid (ZSM-5-SO₃H) and introduced for the first time as a mild, convenient, reusable, and heterogeneous catalyst. Various types of aldehydes were efficiently converted to their 1,1-diacetates using a catalytic amount of ZSM-5-SO₃H in excellent yields under solvent-free and heterogeneous conditions at room temperature. The deprotection of 1,1-diacetates has also been achieved using this novel catalyst in ethanol. The procedure is operationally simple, environmentally benign, and only a stoichiometric amount of anhydride is used.     

Clean synthesis of biodiesel over solid acid catalysts of sulfonated mesopolymers

FDU-15-SO₃H, a solid acid material prepared from the sulfonation of FDU-15 mesoporous polymer, has been demonstrated to serve as an efficient catalyst in the esterification of palmitic acid with methanol as well as in the transesterification of fatty acid-edible oil mixture. FDU-15-SO₃H achieved an acid conversion of 99.0% when the esterification was carried out at 343 K with a methanol/palmitic acid molar ratio of 6:1 and 5 wt% catalyst loading. It was capable of giving 99.0% yield of fatty acid methyl esters (FAME) when the transesterification of soybean oil was performed at 413 K and the methanol/oil weight ratio of 1:1. FDU-15-SO₃H was further applied to the transesterification/esterification of the oil mixtures with a varying ratio of soybean oil to palmitic acid, which simulated the feedstock with a high content of free fatty acids. The yield of FAME reached 95% for the oil mixtures containing 30 wt% palmitic acid. This indicated the sulfonated mesopolymer was a potential catalyst for clean synthesis of fuel alternative of biodiesel from the waste oil without further purification.     

Copper-doped sulfonic acid-functionalized MIL-101(Cr) metal–organic framework for efficient aerobic oxidation reactions

A series of Cr-based metal–organic framework MIL-101-SO₃H bearing sulfonic acid functional groups were utilized for the immobilization of catalytically active copper species via a post-synthetic metalation method. The novel materials were fully characterized by scanning electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), the Brunauer–Emmett–Teller method, and thermogravimetric analysis. XPS and the EDX element map both suggested that Cu²⁺ is coordinately bonded to the MIL-101-SO₃H, which forms the MIL-101-SO₃@Cu structure. The obtained copper-doped MIL-101-SO₃@Cu-1, MIL-101-SO₃@Cu-2, and MIL-101-SO₃@Cu-3 catalysts were utilized in the selective oxidation of alcohols and epoxidation of olefins using molecular oxygen as an oxidant. Catalytic aerobic oxidation optimization showed that MIL-101-SO₃@Cu-1 is the optimal catalyst and it can be reused ten times without compromising the yield and selectivity.     

Solvent-free acetylation and tetrahydropyranylation of alcohols catalyzed by recyclable sulfonated ordered nanostructured carbon

Rapid and practical green acetylation and tetrahydropyranylation routes of structurally diverse alcohols and phenols were applied under solvent-free reaction conditions providing excellent yields, using catalytic amounts of environmentally friendly sulfonated ordered nanoporous carbon (CMK-5-SO₃H). Non-toxic nature of the catalyst, its easy handling, recovery and reusability, and the absence of any solvent characterize the presented procedures as efficient methods. These procedures provide methods for the separation of the product by simple filtration.     

Conversion of Glucose to Valuable Platform Chemicals over Graphene Solid Acid Catalyst

Biomass-derived hexose sugars, the most abundant renewable resources in the world, have potential to be the sustainable resources for production of platform chemicals. Here, conversion of glucose is investigated by using sulfonated graphene (rGO-SO₃H) as solid acid catalyst in water without any organic solvent. At first, graphene functionalized with sulfonic acid groups is prepared by using NaH and propane sultone, and then it is characterized by means of XPS, FT-IR, and TEM to confirm the existence of the sulfonic acid groups. The catalytic activity of rGO-SO₃H in the conversion of glucose to valuable chemicals is studied under different reaction conditions. The maximum yield of 5-hydroxymethylfurfural (HMF) is 28.8%, and the total yield of formic acid, lactic acid and HMF is 51.94% when the reaction is conducted at the optimized reaction condition. In addition, the rGO-SO₃H gives a relatively high total yield of the three kinds of products after five run experiments, indicating that the catalyst shows good thermal stability.     

Alkylation of phenol with olefins in the presence of catalysts based on mesoporous aromatic frameworks

Mesoporous polyaromatic frameworks (PAFs) based on tetraphenylmethane were obtained and modified with sulfonic acid groups. The compounds were characterized by solid-state ¹³C NMR and IR spectroscopy, low-temperature nitrogen adsorption-desorption, and transmission electron microscopy. The acidities of the PAF-1-SO₃H and PAF-2-SO₃H samples determined by titration were 3.99 mmol g^–1 and 0.91 mmol g^–1, respectively. The catalytic activity of PAF-SO₃H for alkylation of phenol with linear terminal olefins was investigated. The reaction products were isomeric monoalkylphenols (C-alkylates), and alkyl phenyl ethers (O-alkylates).     

The catalytic effect of Al-KIT-5 and KIT-5-SO<Subscript>3</Subscript>H on the conversion of fructose to 5-hydroxymethylfurfural

The aim of this work is to study the production of hydroxymethylfurfural (HMF) from fructose using heterogenous catalysts based on KIT-5. For this propose, Al-KIT-5 and KIT-5-SO₃H as the Lewis and Bronsted catalysts were prepared and were characterized using different techniques such as FT-IR, SEM, EDS, TEM, BET, TGA and elemental analysis. With the use of Al-KIT-5 as the catalyst, the appropriate reaction temperature and time were 135 °C and 60 min, respectively. Moreover, with the use of KIT-5-SO₃H as the catalyst, the proper reaction conditions were found to be 125 °C and 45 min, respectively. In addition, the corresponding amounts of catalyst weight were 40 and 50 mg for KIT-5-SO₃H and Al-KIT-5, respectively. Under these conditions, the conversion of fructose was 93.9 and 88.3%, respectively. These results indicated that, due to its Bronsted acid nature, the KIT-5-SO₃H catalyst showed better results when 40 mg catalyst was used at 125 °C for 45 min in DMSO as the solvent. Both catalysts could be recycled and reused several times.     

Cross-aldol Condensation of Cycloalkanones and Aromatic Aldehydes in the Presence of Nanoporous Silica-based Sulfonic Acid (SiO2-Pr-SO3H) under Solvent Free Conditions

The aromatic aldehydes underwent cross aldol condensation with cycloalkanones in the presence of a catalytic amount of nanoporous silica-based sulfonic acid (SiO2-Pr-SO3H) under solvent-free conditions to afford the corresponding α,α’-bis(substituted benzylidene)cycloalkanones in excellent yields with short reaction time without any side reactions. This method is very general, simple and environmentally friendly in contrast with other existing methods. SiO2-Pr-SO3H was proved to be an efficient heterogeneous solid acid catalyst, which could be easily handled and removed from the reaction mixture by simple filtration, and also recovered and reused without loss of reactivity.     

四丁基铵钨多酸[TBA]2[W6O19]:无溶剂条件下通过不对称汉斯反应快速合成聚氢化喹啉的新型可重复使用的非均相催化剂（英文）

A novel, efficient, and environmentally friendly method for the synthesis of polyhydroquinoline derivatives by a one‐pot, four‐component unsymmetrical Hantzsch condensation of dimedone, aldehydes, ethyl acetoacetate, and ammonium acetate in the presence of a catalytic amount of tetrabutylammonium hexatungstate [TBA]2[W6O19] under solvent‐free conditions has been developed. The results showed that this heterogeneous catalyst has high catalytic activity and the desired products were obtained in good to high yields. Moreover, the catalyst was found to be reusable and considerable catalytic activity was still achieved after the fifth run.     

Optimization and Characterization of Mesoporous Sulfonated Carbon Catalyst and Its Application in Modeling and Optimization of Acetin Production

In this study, an optimized mesoporous sulfonated carbon (OMSC) catalyst derived from palm kernel shell biomass was developed using template carbonization and subsequent sulfonation under different temperatures and time conditions. The OMSC catalyst was characterized using acid-base titration, elemental analysis, XRD, Raman, FTIR, XPS, TPD-NH₃, TGA-DTA, SEM, and N₂ adsorption–desorption analysis to reveal its properties. Results proved that the OMSC catalyst is mesoporous and amorphous in structure with improved textural, acidic, and thermal properties. Both FTIR and XPS confirmed the presence of -SO₃H, -OH, and -COOH functional groups on the surface of the catalyst. The OMSC catalyst was found to be efficient in catalyzing glycerol conversion to acetin via an acetylation reaction with acetic acid within a short period of 3 h. Response surface methodology (RSM), based on a two-level, three-factor, face-centered central composite design, was used to optimize the reaction conditions. The results showed that the optimized temperature, glycerol-to-acetic acid mole ratio, and catalyst load were 126 °C, 1:10.4, and 0.45 g, respectively. Under these optimum conditions, 97% glycerol conversion (GC) and selectivities of 4.9, 27.8, and 66.5% monoacetin (MA), diacetin (DA), and triacetin (TA), respectively, were achieved and found to be close to the predicted values. Statistical analysis showed that the regression model, as well as the model terms, were significant with the predicted R² in reasonable agreement with the adjusted R² (<0.2). The OMSC catalyst maintained excellent performance in GC for the five reaction cycles. The selectivity to TA, the most valuable product, was not stable until the fourth cycle, attributable to the leaching of the acid sites.     

Magnetic core–shell Fe3O4@C-SO3H nanoparticle catalyst for hydrolysis of cellulose

Catalytic hydrolysis of cellulose over solid acid catalysts is one of efficient pathways for the conversion of biomass into fuels and chemicals. High catalytic activity and easy separation from reaction media are two important factors for evaluating the performance of the solid acid catalysts for the cellulose hydrolysis. In this study, we report a core–shell Fe₃O₄@C-SO₃H nanoparticle with a magnetic Fe₃O₄ core encapsulated in a sulfonated carbon shell, as recyclable catalyst for the hydrolysis of cellulose. The sulfonated carbon shell shows a good activity, presenting 48.6 % cellulose conversion with 52.1 % glucose selectivity under the moderate conditions of 140 °C after 12 h reaction. Importantly, the magnetic Fe₃O₄ core makes the catalysts easily separated from reaction mixtures by using the externally applied magnetic field. In addition, the Fe₃O₄@C-SO₃H nanoparticle catalyst shows a high stability in the activity and magnetization during recycling tests, suggesting it a promising solid acid catalyst for the hydrolysis of cellulose.     

Aluminum(III) triflate-catalyzed selective oxidation of glycerol to formic acid with hydrogen peroxide

Glycerol is a by-product of biodiesel production and is an important readily available platform chemical. Valorization of glycerol into value-added chemicals has gained immense attention. Herein, we carried out the conversion of glycerol to formic acid and glycolic acid using H₂O₂ as an oxidant and metal (III) triflate-based catalytic systems. Aluminum(III) triflate was found to be the most efficient catalyst for the selective oxidation of glycerol to formic acid. A correlation between the catalytic activity of the metal cations and their hydrolysis constants (K_h) and water exchange rate constants was observed. At 70 °C, a formic acid yield of up to 72% could be attained within 12 h. The catalyst could be recycled at least five times with a high conversion rate, and hence can also be used for the selective oxidation of other biomass platform molecules. Reaction kinetics and ¹H NMR studies showed that the oxidation of glycerol (to formic acid) involved glycerol hydrolysis pathways with glyceric acid and glycolic acid as the main intermediate products. Both the [Al(OH)_x]ⁿ⁺ Lewis acid species and CF₃SO₃H Brønsted acid, which were generated by the in-situ hydrolysis of Al(OTf)₃, were responsible for glycerol conversion. The easy availability, high efficiency, and good recyclability of Al(OTf)₃ render it suitable for the selective oxidation of glycerol to high value-added products.     

碳-硅复合介孔磺酸催化剂的制备及其在缩醛(酮)反应中的应用

采用浸渍法将糠醇负载在铝改性的SBA-15介孔孔道中,经550℃不完全碳化制备了结构规整、含多苯环的中空管状硅碳复合介孔材料.结果表明,通过温和磺酸化作用可使磺酸基团成功取代在多苯环上,其酸量随着多苯环涂层厚度变化在0.38~0.84 mmol/g范围内可控调变.相比于蔗糖作为糖源的复合固体酸,所制碳多苯环-硅酸催化剂具有中空碳纳米管堆积的类似CMK-5介孔结构,以及较大的反应空间、稳定的机械性能、较高的比表面和大量可以接触的质子酸中心,因而在大分子缩醛(酮)反应中表现了良好的催化性能.     

Fabrication of glucose biosensor for whole blood based on Au/hyperbranched polyester nanoparticles multilayers by antibiofouling and self-assembly technique

Acknowledging the benefits of hyperbranched polymers and their nanoparticles, herein we report the design and synthesis of sulfonic acid group functionalized hydroxyl-terminated hyperbranched polyester (H30-SO₃H) nanoparticles and their biomedical application. The H30-SO₃H nanoparticles were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H NMR). The good hemocompatibility of H30-SO₃H nanoparticles was also investigated by coagulation tests, complement activation and platelet activation. The novel glucose biosensor was fabricated by immobilizing the positively charged Au nanoparticles, H30-SO₃H nanoparticles and glucose oxidase (GOx) onto the surface of glassy carbon electrode (GCE). It can be applied in whole blood directly, which was based on the good hemocompatibility and antibiofouling property of H30-SO₃H nanoparticles. The biosensor had good electrocatalytic activity toward glucose with a wide linear range (0.2–20 mM), a low detection limit 1.2 × 10⁻⁵ M in whole blood and good anti-interference property. The development of materials science will offer a novel platform for application to substance detection in whole blood.     

Pyrazinium Di(hydrogen sulfate) as a Novel,Highly Efficient and Homogeneous Catalyst for the Condensation of Enolizable Ketones with Aldehydes,Acetonitrile and Acetyl Chloride

A highly efficient protocol for the synthesis of β‐acetamido ketone or ester derivatives in the presence of pyrazinium di(hydrogen sulfate) {Py(OSO₃H)₂} as a novel, green and homogeneous solid acid catalyst at room temperature is described. One‐pot multi‐component condensation of enolizable ketones or alkyl acetoacetates with aldehydes, acetonitrile and acetyl chloride affords the title compounds in high to excellent yields and in relatively short reaction times. In this work, the efficiency of our recently reported solid acid catalyst, saccharin sulfonic acid (Sa‐SO₃H), in the synthesis of β‐acetamido ketones/esters is also studied. Moreover, in this research, some new β‐acetamido ketones and esters (i.e. one complex structure) are prepared.     

Three Keggin‐Type Transition Metal‐Substituted Polyoxometalates as Pure Inorganic Photosensitizers for p‐Type Dye‐Sensitized Solar Cells

In light of the serious challenge of severe global energy shortages, p‐type dye‐sensitized solar cells (p‐DSSCs) have attracted increasing levels of interest. The potential of three Keggin‐type transition metal‐substituted polyoxometalates, TBA₈Na₂[SiW₉O₃₇{Co(H₂O)₃}]? 11 H₂O (SiW₉Co₃), TBA₄[(SiO₄)W₁₀Mn^III₂O₃₆H₆]?1.5 CH₃CN? 2 H₂O (SiW₁₀Mn^III₂), and TBA_3.5H_5.5[(SiO₄)W₁₀Mn^III/IV₂O₃₆]? 10 H₂O?0.5 CH₃CN (SiW₁₀Mn^III/IV₂) has been explored as pure inorganic dye photosensitizers for p‐DSSCs (TBA=(n‐C₄H₉)₄N⁺). The three dyes show overall conversion efficiencies of 0.038, 0.029, and 0.027 %, respectively, all of which are higher than that of coumarin 343 (0.017 %). These polyoxometalates are the first three pure inorganic dyes reported for use with p‐DSSCs and therefore demonstrate a new strategy for designing efficient dyes, especially pure inorganic dyes. Moreover, they broaden the range of applications for polyoxometalates.     

MCM-41 anchored sulfonic acid （MCM-41-R-SO3H）： A mild,reusable and highly efficient heterogeneous catalyst for the Biginelli reaction

An efficient three-component synthesis of 3,4-dihydropyrimidinones using MCM-41 anchored sulfonic acid （MCM-41-R-SO3H） as a mild, heterogeneous catalyst for Biginelli reaction in CH3CN under reflux condition is described.     

Plasma-Enhanced Catalytic Oxidation of Carbon Monoxide

Data on the kinetics of plasma-enhanced and plasma-enhanced catalytic oxidation of carbon(II) oxide with IK-1-6 catalyst are presented. The influence exerted by IK-1-6 catalyst on the conversion of carbon-containing components of the CO-CO₂-CH₄-SO₂-air gas mixture in barrier-discharge plasma is analyzed.