Preparation and characteristics of nanostructured lipid carriers for control-releasing progesterone by melt-emulsification

Nanostructured lipid carriers (NLC) made from mixtures of solid and spatially incompatible liquid lipids were prepared by melt-emulsification. Their drug loading capacity and releasing properties of progesterone were compared with those of solid lipid nanoparticles (SLN), and the NLC prepared by solvent diffusion method. Monostearin (MS) and stearic acid (SA) were used as solid lipid, whilst the oleic acid (OA) was used as liquid lipid. Properties of carriers such as the particle size and its distribution, drug loading, drug encapsulation efficiency and drug release behavior were investigated. As a result, the drug encapsulation efficiencies were improved by adding the liquid lipid into the solid lipid of nanoparticles. The drug release behavior could be adjusted by the addition of liquid lipid, and the NLC with higher OA content showed the faster rate of drug releasing. NLC had higher efficiency of encapsulation and slower rate of drug release than those of NLC prepared by solvent diffusion method. On the other hand, the NLC with higher drug loading was obtained, though the drug encapsulation efficiency was decreased slightly due to the increase of the amount of drug. The NLC modified with polyethylene glycol (PEG) was also prepared by using polyethylene glycol monostearate (PEG-SA). It was observed that the incorporation of PEG-SA reduced the drug encapsulation efficiency, but increased the rate of drug release. A sample with almost complete drug release in 24 h was obtained by modifying with 1.30 mol% PEG-SA. It indicated that the modified NLC was a potential drug delivery system for oral administration.     

Preparation and characteristics of nanostructured lipid carriers for control-releasing progesterone by melt-emulsification

Nanostructured lipid carriers (NLC) made from mixtures of solid and spatially incompatible liquid lipids were prepared by melt-emulsification. Their drug loading capacity and releasing properties of progesterone were compared with those of solid lipid nanoparticles (SLN), and the NLC prepared by solvent diffusion method. Monostearin (MS) and stearic acid (SA) were used as solid lipid, whilst the oleic acid (OA) was used as liquid lipid. Properties of carriers such as the particle size and its distribution, drug loading, drug encapsulation efficiency and drug release behavior were investigated. As a result, the drug encapsulation efficiencies were improved by adding the liquid lipid into the solid lipid of nanoparticles. The drug release behavior could be adjusted by the addition of liquid lipid, and the NLC with higher OA content showed the faster rate of drug releasing. NLC had higher efficiency of encapsulation and slower rate of drug release than those of NLC prepared by solvent diffusion method. On the other hand, the NLC with higher drug loading was obtained, though the drug encapsulation efficiency was decreased slightly due to the increase of the amount of drug. The NLC modified with polyethylene glycol (PEG) was also prepared by using polyethylene glycol monostearate (PEG-SA). It was observed that the incorporation of PEG-SA reduced the drug encapsulation efficiency, but increased the rate of drug release. A sample with almost complete drug release in 24 h was obtained by modifying with 1.30 mol% PEG-SA. It indicated that the modified NLC was a potential drug delivery system for oral administration.     

The enhancement on thermal stability and charring–forming capability of nitration group

Lipid nanoparticles, both solid lipid nanoparticles and nanostructured lipid carriers (NLC), containing tacrolimus (FK) were obtained by solvent diffusion method associated with ultrasonication using stearic acid (SA) or beeswax as solid lipid. The oleic acid was used as liquid lipid in the NLC. Lipid nanoparticles were characterized by determining the drug loading, particle size, polydispersity index (PDI) and zeta potential (ZP). Analysis by differential scanning calorimetry and X-ray diffraction were performed. Lipid nanoparticles presented nano-sized from 139 to 275 nm. The PDI results show the particles present from 0.3 to 0.5, and ZP was higher than |25| mV. Drug loading ranged of 2.3–3.2%. SA nanoparticles presented better ZP, average size and distribution. However, beeswax nanoparticles showed higher drug loading. Results suggest there are no incompatibilities between FK and the raw materials. Polymorphic modifications were not observed. The results presented show that lipid nanoparticles using both lipids were successfully obtained and may represent promising delivery system of FK in topical formulations.     

Nanostructured lipid carriers based suppository for enhanced rectal absorption of ondansetron: In vitro and in vivo evaluations

The current research aimed to fabricate ondansetron nanostructured lipid carriers (OND-NLCs) and incorporate them into a suppository base to manage chemotherapy-induced vomiting and nausea, which offer the advantage of both rapid onset and prolonged release. NLCs were fabricated by adopting the solvent diffusion method. The binary lipid mixture of oleic acid (liquid lipid) and lauric acid (solid lipid) were prepared in distinct ratios. The NLCs were characterized concerning the surface charge, size, drug encapsulation efficiency, and surface morphology. In addition, the influence of surfactant, co-surfactant, and lipid on entrapment efficiency and particle size was investigated. Phosphate buffer having pH 7.4 is used for evaluating in vitro drug release by utilizing a dialysis membrane. Various kinetics models were used to estimate the drug release kinetics of fabricated nanostructured lipid carriers. The particle size of the NLCs was calculated between 101 and 378 nm with negative zeta potential on the NLC’s surface. The entrapment efficiency was found between 68 and 87%. Scanning Electron Microscopic analysis showed the spherical shape of nanostructured lipid carriers. The dissolution profile of the ondansetron-loaded NLC suppository depicts biphasic behavior of firstly burst release then slow release was observed. The diffusion controlled release was evident from kinetic modeling. The succeeding step comprehended the fabrication and characterization of NLC-based suppositories utilizing NLC formulations that demonstrated the combined advantage of rapid onset, prolonged release, and better in vivo bioavailability as compared to control suppository.     

Tryptanthrin-loaded nanoparticles for delivery into cultured human breast cancer cells, MCF7: the effects of solid lipid/liquid lipid ratios in the inner core

Tryptanthrin is an ancient medicine which recently was also found to have a function of downregulating multidrug resistance (MDR). However, tryptanthrin is insoluble in water, which limits its availability for delivery into cancer cells. There is a need to improve delivery systems to increase the inhibition of MDR. The aim of this study was to employ nanoparticles encapsulating tryptanthrin to improve the delivery and promote the sustained release of this drug. The approach was to encapsulate tryptanthrin in various nanoparticles, including solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs), and lipid emulsions (LEs). We compared the particle size and zeta potential of these nanoparticles, and evaluated the partitioning behavior of tryptanthrin in them. We also determined the release kinetics of tryptanthrin from these nanoparticles. Moreover, cellular cytotoxicity toward and uptake of tryptanthrin-loaded nanoparticles by human breast cancer cells were determined. We found that the mean particle size of NLCs was lower, and the partition coefficient was higher than those of SLNs, and an increased tryptanthrin release rate was found with the NLC delivery system. NLCs achieved the sustained release of tryptanthrin without an initial burst. In particular, the NLC-C formulation, composed of a mixture of Compritol and squalene as the core materials, showed the highest release rate and cytotoxic effect. Confocal laser scanning microscopic images confirmed drug internalization into cells which enhanced the endocytosis of the particles. These results suggested that NLCs can potentially be exploited as a drug carrier for topical or intravenous use in the future.     

Design and characterization of a new drug nanocarrier made from solid-liquid lipid mixtures

The classical lipid nanoparticles that have been proposed for drug delivery are composed of solid lipids. Due to their composition, these nanoparticles have a limited drug loading and controlled release capacity. The present work was aimed at modifying the inner structure of nanoparticles made of tripalmitin, lecithin, and poly(ethylene glycol) (PEG)-stearate with the incorporation of a liquid lipid (Miglyol 812 oil). The composition and structural organization of the components of the resulting nanoparticles were characterized by (1)H NMR spectroscopy. Any possible changes in the crystalline domains of individual components when in the form of the nanoparticles were investigated by differential scanning calorimetry (DSC) and X-ray diffraction spectroscopy. The results of the NMR analysis indicated a significant incorporation of the oil to the solid nanoparticle matrix. Furthermore, the relaxation time constants as well as the peak width of the (1)H NMR spectrum of the nanoparticles suggest the presence of the oil in the form of phase-separated liquid nanoreservoirs within the nanoparticles. This conclusion was supported by the observation of restricted diffusion dynamics for the oil molecules. Interestingly, the incorporation of the oil did not interfere with the crystallization of the solid lipids (tripalmitin and PEG-stearate). In conclusion, a new nanostructure consisting of solid lipids and oily nanodomains was developed. This structural modification of the solid lipid nanoparticles may have an effect on their encapsulation capacity and controlled release properties.     

Stimuli‐responsive zein‐based nanoparticles as a potential carrier for ellipticine: Synthesis,release, and in vitro delivery

In the present research, we have investigated a drug delivery system based on the pH‐responsive behaviors of zein colloidal nanoparticles coated with sodium caseinate (SC) and poly ethylene imine (PEI). These systematically designed nanoparticles were used as nanocarriers for encapsulation of ellipticine (EPT), as an anticancer drug. SC and PEI coatings were applied through electrostatic adsorption, leading to the increased size and improved polydispersity index of nanoparticles as well as sustained release of drug. Physicochemical characteristics such as hydrodynamic diameter, size distribution, zeta potential and morphology of nanoparticles prepared using different formulations and conditions were also determined. Based on the results, EPT was encapsulated into the prepared nanoparticles with a high drug loading capacity (5.06%) and encapsulation efficiency (94.8%) under optimal conditions. in vitro experiments demonstrated that the release of EPT from zein‐based nanoparticles was pH sensitive. When the pH level decreased from 7.4 to 5.5, the rate of drug release was considerably enhanced. The mechanism of pH‐responsive complexation in the drug encapsulation and release processes was extensively investigated. The pH‐dependent electrostatic interactions and drug state were hypothesized to affect the release profiles. Compared to the EPT‐loaded zein/PEI nanoparticles, the EPT‐loaded zein/SC nanoparticles exhibited a better drug sustained‐release profile, with a smaller initial burst release and longer release period. According to the results of in vitro cytotoxicity experiments, drug‐free nanoparticles were associated with a negligible cytotoxicity, whereas the EPT‐loaded nanoparticles displayed a high toxicity for the cancer cell line, A549. Our findings indicate that these pH‐sensitive protein‐based nanoparticles can be used as novel nanotherapeutic tools and potential antineoplastic drug carriers for cancer chemotherapy with controlled release.     

Formulation and evaluation of gel containing nanostructured lipid carriers of tretinoin–Epi-β-CD binary complex for topical delivery

The objective of present research work was to formulate and evaluate topical gel containing tretinoin–cyclodextrin (CD) binary complex loaded into nanostructured lipid carriers (NLCs). Use of cyclodextrin and nanolipid carrier together in a system produced a synergistic effect by increasing the drug release and skin permeation, thus improving the overall therapeutic effect. Two different cyclodextrins i.e. β-CD and its water soluble polymeric derivative epichlorohydrin-β-cyclodextrin (EPI-β-CD) were used to obtain binary inclusion complex of drug-cyclodextrin (D-CD) systems by two different techniques (kneading and co-evaporation). The prepared solid complexes were characterized by FTIR, DSC, XRD etc. and the best system was selected for loading into nanolipid carriers. NLC comprising glyceryl mono stearate (GMS) and oleic acid were obtained by slightly modified emulsification evaporation method. Four different formulations of NLCs were suitability characterized for particle size, zeta potential, entrapment efficiency, drug loading and drug release. EPI-β-CD was found to be more effective than β-CD in enhancing solubility and dissolution properties of tretinoin. The most effective NLC formulation was incorporated into carbopol hydrogel which showed better permeation properties than that of the reference gel (0.1%).     

Physicochemical properties of nevirapine-loaded solid lipid nanoparticles and nanostructured lipid carriers

Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) coated with human serum albumin (HSA) were fabricated for formulating nevirapine (NVP). Here, NLCs contained low-melting-point oleic acid (OA) in the internal lipid phase. The results revealed that the two nanoparticles were uniformly distributed with the average diameter ranging from 145 to 180 nm. The surface HSA neutralized the positive charge of dimethyldioctadecyl ammonium bromide (DODAB) on SLNs and NLCs and reduced their zeta potential. In a fixed ratio of solid lipids, SLNs entrapped more NVP than NLCs. The incorporation of OA also reduced the thermal resistance of NLCs and accelerated the release of NVP from the nanocarriers. When incubated with DODAB-stabilized SLNs, the viability of human brain-microvascular endothelial cells (HBMECs) reduced. However, the surface HSA increased the viability of HBMECs about 10% when the concentration of SLNs was higher than 0.8 mg/mL. HSA-grafted SLNs and NLCs can be effective formulations in the delivery of NVP for viral therapy.     

Modification and stabilizing effects of PEG on resveratrol-loaded solid lipid nanoparticles

Resveratrol-loaded solid lipid nanoparticles (SLNs) modified by polyethylene glycol (PEG2000) (RES–PEG–SLNs) were prepared to study the stabilizing influences of PEG2000 on SLNs properties including loading capacity, particle size, photostability, and release. The micromorphology, particle size distribution, drug–lipid–modifier interaction and crystalline structure were characterized to elucidate stabilizing effects of PEG2000 on SLNs. Compared with ordinary SLNs, SLNs modified by PEG2000 at relatively low amounts of [m(PEG2000):m(lipids) = 1:10] exhibit high drug loading, steady nanoparticle size distributions, photostability and sustained release. According to characterizations, RES–PEG–SLNs formation is dependent on the physical interactions of drug–lipid–modifier. Since PEG2000 is doped into lipid matrix in a non-crystalline state, the lipids crystalline arrangement is disrupted. Additionally, RES–PEG–SLNs are crystallized in a PEG2000/lipid eutectic mixture rather than a simple mixture, inhibiting the lipid polymorphism transformation from α- to β-form, and therefore preventing drug exclusion from the lipid matrix. The PEG2000/lipid matrix contains lattice defects, which allow for the incorporation of more resveratrol and preventing it from photodegradation effectively. In contrast to the burst release of SLNs modified without PEG2000, resveratrol is released more slowly from the lattice defects in lipid matrix of RES–PEG–SLNs, resulting in a sustained release fitted by a two-stage exponential kinetic equation. PEG2000 is distributed on the RES–PEG–SLNs surface, increasing repulsion between nanoparticles and avoiding particles aggregation. These results confirm that both matrix doping effects and surface steric hindrance produced by the presence of PEG2000 play important roles in maintaining high loadings, nanoparticle size, photostability and sustained release.