3,4,5-triarylisothiazoles via C-C coupling chemistry

The regiocontrolled preparation of triarylisothiazoles is presented. 3-Halo-5-phenylisothiazole-4-carbonitriles, 1 (hal=Cl) and 18 (hal=I), are converted into the corresponding 4-bromo derivatives 5 (3-hal=Cl) and 24 (3-hal=I) via a Hunsdiecker strategy while the 4-iodo analogues 7 (3-hal=Cl) and 22 (3-hal=I) are prepared via a Hoffmann and Sandmeyer strategy. Regioselective Suzuki, Stille and Negishi reactions occur at C-4 with both the 4-bromo- and 4-iodoisothiazoles 5 and 7 , the latter being more reactive than the former. 3-Iodoisothiazoles 22 and 24 fail to give regiocontrolled Suzuki, Stille or Negishi couplings, however, 4-bromo-3-iodo-5-phenylisothiazole 24 gives the regiospecific palladium catalysed Ullmann-type reaction product 3,3'-bi(4-bromo-5-phenylisothiazole) 25 . Alkali hydrolysis of 3-chloro-4,5-diphenylisothiazole 8 gives the 3-hydroxy analogue 12 which is converted into 3-bromo-4,5-diphenylisothiazole 13 with POBr(3). 3-Bromoisothiazole 13 reacts with phenylzinc chloride to give 3,4,5-triphenylisothiazole 17 but fails to undergo effective Suzuki or Stille couplings. 3,5-Diphenylisothiazole-4-carbonitrile 26 is converted into the 4-bromo- and 4-iodo-3,5-diphenylisothiazoles 30 and 34 both of which are effective for Suzuki and Stille couplings. A series of triarylisothiazoles are prepared in this manner and fully characterised.     

Regiospecific Suzuki coupling of 3,5-dichloroisothiazole-4-carbonitrile

3,5-Dichloroisothiazole-4-carbonitrile 1 react with aryl- and methylboronic acids to give in high yields the 3-chloro-5-(aryl and methyl)-isothiazole-4-carbonitrile 2 regiospecifically. The reaction was optimized with respect to base, phase transfer agent and palladium catalyst. Suzuki coupling at C-5 was also achieved in high yield using potassium phenyltrifluoroborate. The regiospecificity of either coupling method is maintained with 3,5-dibromoisothiazole-4-carbonitrile 4 to give exclusively 3-bromo-5-phenylisothiazole-4-carbonitrile 5. Suzuki cross-coupling conditions applied to 3-chloro-5-phenylisothiazole-4-carbonitrile 2a gave 3-phenoxy-5-phenylisothiazole-4-carbonitrile 6, which was prepared independently, and not the 3-phenyl derivative. All isothiazole products were fully characterized.     

Halogenated Quinolines as Substrates for the Palladium‐Catalyzed Cross‐Coupling Reactions to Afford Substituted Quinolines

The use of palladium complexes in catalyzing the cross‐coupling of halogenated quinolines with various organometalic reagents has led to the development of radically new methods of synthesizing novel substituted quinoline derivatives. The focus of this review is on the application of the following palladium‐catalyzed reactions of halogenated quinolines with organometalic reagents to afford substituted quinoline derivatives: Kumada, Stille, Negishi, Sonogashira, Suzuki, Heck, and Hiyama cross‐coupling reactions.     

A simple guide for predicting regioselectivity in the coupling of polyhaloheteroaromatics

A simple guide for predicting the order and site of coupling (Suzuki, Stille, Negishi, Sonogashira, etc.) in polyhaloheteroaromatics based upon the (1)H NMR chemical shift values of the parent non-halogenated heteroaromatics has been developed.     

The Development of Bulky Palladium NHC Complexes for the Most-Challenging Cross-Coupling Reactions

Palladium‐catalyzed cross‐coupling reactions enable organic chemists to form C? C bonds in targeted positions and under mild conditions. Although phosphine ligands have been intensively researched, in the search for even better cross‐coupling catalysts attention has recently turned to the use of N‐heterocyclic carbene (NHC) ligands, which form a strong bond to the palladium center. PEPPSI (pyridine‐enhanced precatalyst preparation, stabilization, and initiation) palladium precatalysts with bulky NHC ligands have established themselves as successful alternatives to palladium phosphine complexes. This Review shows the success of these species in Suzuki–Miyaura, Negishi, and Stille–Migita cross‐couplings as well as in amination and sulfination reactions.     

Ni催化的碳(sp2)-碳和碳(sp2)-杂交叉偶联反应

综述了Ni催化的碳(sp²)-碳和碳(sp²)-杂交叉偶联反应. 主要反应类型有: Heck反应、Sonogashira反应、Kumada-Corriu反应、Negishi反应、Stille反应、Suzuki反应、Ullmann反应、C—N偶联反应、C—O偶联反应、C—P偶联反应和C—S偶联反应. 详细地介绍了各个反应的底物要求、反应条件、反应选择性和产率. 最后, 我们对Ni催化的反应机理研究也作了总结.     

Palladium nanoparticles as efficient green homogeneous and heterogeneous carbon-carbon coupling precatalysts: a unifying view

Pd catalysis of C-C bond formations is briefly reviewed from the angle of nanoparticles (NPs) whether they are homogeneous or heterogeneous precatalysts and whether they are intentionally preformed or generated from a Pd derivative such as Pd(OAc)2. The most studied reaction is the Heck coupling of halogenoarenes with olefins that usually proceeds at high temperature (120-160 degrees C). Under such conditions, the PdII precursor is reduced to Pd0, forming PdNPs from which Pd atom leaching, subsequent to oxidative addition of the aryl halide onto the PdNP surface, is the source of very active molecular catalysts. Other C-C coupling reactions (Suzuki, Sonogashira, Stille, Negishi, Hiyama, Corriu-Kumada, Ullmann, and Tsuji-Trost) can also be catalyzed by species produced from preformed PdNPs. For catalysis of these reactions, leaching of active Pd atoms from the PdNPs may also provide a viable molecular mechanistic scheme. Thus, the term "PdNP catalysis of C-C coupling" used in this review refers to this function of PdNPs as precursors of catalytically active Pd species (i.e., the PdNPs are precatalysts of C-C coupling reactions).     

Synthesis of a sterically crowded atropisomeric 1,8-diacridylnaphthalene for dual-mode enantioselective fluorosensing

An efficient synthetic route to a sterically crowded 1,8-diheteroarylnaphthalene-derived enantioselective fluorosensor that operates in two different detection modes utilizing fluorescence lifetime and intensity has been developed. Screening of palladium-catalyzed Negishi, Kumada, Suzuki, Hiyama, and Stille coupling methods showed that the latter affords highly congested 1,8-diarylnaphthalenes in superior yields. Despite severe steric hindrance, axially chiral 1,8-bis(3-(3',5'-dimethylphenyl)-9-acridyl)naphthalene, 1, was obtained in 68% yield from 1,8-dibromonaphthalene, 14, and 3-(3',5'-dimethylphenyl)-9-tributylstannylacridine, 13, via two consecutive Stille cross-coupling steps using tetrakis(triphenylphosphine)palladium(0) as catalyst in the presence of copper(II) oxide. The preparation of 1 involved formation of 4-(3',5'-dimethylphenyl)-2-chlorobenzoic acid, 7, through microwave-assisted Suzuki coupling of 4-bromo-2-chlorobenzoic acid, 10, and 3,5-dimethylphenylboronic acid, 11, followed by regioselective amination with aniline and acridine ring construction in phosphorus oxybromide. Lithiation, subsequent treatment with trimethylstannyl chloride, and Stille cross-coupling then completed the five-reaction sequence providing 1 in 57% overall yield. The enantiomers of 1 were separated by semipreparative HPLC on a (R,R)-Whelk-O 1 column and successfully employed in enantioselective fluorosensing of N-t-Boc-protected serine, 20, glutamine, 22, proline, 23, and 2-hydoxy-2-methylsuccinic acid, 21. Fluorescence titration experiments with 23 revealed that both static and dynamic quenching occur with distinctive enantioselectivity. Addition of (R)-23 to a solution of (+)-1 in acetonitrile resulted in stronger fluorescence quenching than titration with the (S)-enantiomer of 23. The fluorescence lifetime, tau, of 1 was determined as 18.8 ns and steadily decreased to 7.5 and 6.8 ns in the presence of 0.1 M of (S)-23 and (R)-23, respectively.     

Studies on highly stereoselective addition-elimination reactions of 3-(methoxycarbonyl)-1,2-allen-4-ols with MX. An efficient synthesis of 3-(methoxycarbonyl)-2-halo-1,3(Z)-dienes

3-(Methoxycarbonyl)-2-halo-1,3(Z)-dienes were prepared highly stereoselectively via SN2'-type addition-elimination reactions of 3-(methoxycarbonyl)-1,2-allen-4-ols with MX. These products may easily undergo Negishi or Sonogashira coupling reactions to yield a series of stereodefined polysubstituted (E)-1,3-dienes.     

Convergent stereoselective synthesis of the visual pigment A2E

[chemical reaction: see text]. A stereoselective total synthesis of the visual pigment A2E has been achieved with use of palladium-catalyzed cross-coupling reactions in all key steps: a regioselective Suzuki or Negishi coupling of 2,4-dibromopyridine, a Sonogashira reaction, and a double Stille cross-coupling to complete the bispolyenyl skeleton.     

Aqueous-phase, palladium-catalyzed cross-coupling of aryl bromides under mild conditions, using water-soluble, sterically demanding alkylphosphines

Sterically demanding, water-soluble alkylphosphines have been used in combination with various palladium salts in Suzuki, Sonogashira, and Heck couplings of aryl bromides under mild conditions in aqueous solvents. The tert-butyl-substituted ligands 2-(di-tert-butylphosphino)ethyltrimethylammonium chloride (t-Bu-Amphos) and 4-(di-tert-butylphosphino)-N,N-dimethylpiperidinium chloride (t-Bu-Pip-phos) in combination with palladium(II) salts were found to give catalysts that were significantly more active than catalysts derived from tri(3-sulfonatophenyl)phosphine trisodium (TPPTS). Suzuki couplings of unactivated aryl bromides occurred efficiently at room temperature in water/acetonitrile and water/toluene biphasic mixtures or in neat water. Notably, Suzuki couplings of hydrophilic aryl bromides gave high yields without using organic solvents for the reaction or purification. This methodology has been applied to a highly efficient synthesis of diflunisal. The catalyst derived from t-Bu-Amphos was recycled three times in Suzuki couplings in water/toluene before catalyst activity began to significantly drop. The average yield of four cycles was >80% per cycle. Heck and Sonogashira couplings were carried out under mild conditions (50 and 80 degrees C, respectively) with unactivated aryl bromides to give coupled products in high yield.     

Silver-mediated palladium-catalyzed direct C-H arylation of 3-bromoisothiazole-4-carbonitrile

Silver(I) fluoride-mediated Pd-catalyzed C-H direct arylation/heteroarylation of 3-bromoisothiazole-4-carbonitrile (1a) gives twenty-four 5-aryl/heteroaryl-3-bromoisothiazole-4-carbonitriles. The reaction was partially optimized with respect to catalyst, ligand, and base. During this study 3,3'-dibromo-5,5'-biisothiazole-4,4'-dicarbonitrile (3a) was isolated as a byproduct and subsequently prepared via the silver-mediated Pd-catalyzed oxidative dimerization of 3-bromoisothiazole-4-carbonitrile in 67% yield. The analogous phenylation and oxidative dimerization of 3-chloroisothiazole-4-carbonitrile (1b) gave 3-chloro-5-phenylisothiazole-4-carbonitrile (4) and 3,3'-dichloro-5,5'-biisothiazole-4,4'-dicarbonitrile (3b) in 96% and 69% yields, respectively.     

Desymmetrization of dichloroazaheterocycles

3,6-Dichloropyridizine 1a was converted in good yield into its mono-iodo derivative 1b when treated with a mixture of hydriodic acid and sodium iodide. Pure samples of the mono-iodo derivatives 2b, 3b and 4b could not be obtained from their corresponding dichlorinated precursors with these reagents. Compounds 1b and 4b underwent palladium catalysed Suzuki, Sonogashira and other coupling reactions.     

Suzuki–Miyaura Cross‐Coupling of Potassium Organoborates with 6‐Sulfonate Benzimidazoles Using Microwave Irradiation

This article focuses on the utility of organotrifluoroborate salts as coupling partners for Suzuki–Miyaura cross‐coupling with 4‐nitro‐6‐triflyl benzimidazoles using microwave irradiation. The C–C bond formation at the 6‐position of the electron‐rich 1‐,4‐,6‐trisubstituted benzimidazole core is challenging and was not achievable via Kumada, Negishi, Stille, or Heck coupling strategies. Yields of 37–70% could be obtained via palladium coupling strategies utilizing potassium benzyl trifluoroborates as the organometallic coupling partner.     

Palladium catalyzed C-C coupling reactions of 3,5-dichloro-4H-1,2,6-thiadiazin-4-one

Palladium catalyzed Suzuki-Miyaura, Stille, and Sonogashira coupling reactions are reported for the electron-deficient heterocyclic scaffold 3,5-dichloro-4H-1,2,6-thiadiazin-4-one (1). Furthermore, 3,5-di(thien-2-yl)-4H-1,2,6-thiadiazin-4-one (7m) is further elaborated to afford the tetrathienyl 3,5-bis[(2,2'-bithien)-5-yl]-4H-1,2,6-thiadiazin-4-one (9). All compounds are fully characterized.     

Ligand-supported palladium-catalyzed cross-coupling reactions of (hetero) aryl chlorides

The introduction of electron rich and sterically hindered ligands has made otherwise inert aryl chlorides and hetero aryl chlorides viable coupling partners in palladium-catalyzed Suzuki-Miyaura, Sonogashira, Stille and other types of cross-coupling reactions. This review gives highlights of cross-coupling of aryl chlorides employing in situ generated palladium catalytic systems.     

Comparison between polyethylenglycol and imidazolium ionic liquids as solvents for developing a homogeneous and reusable palladium catalytic system for the Suzuki and Sonogashira coupling

The carbapalladacycle complex of 4-hydroxyacetophenone oxime is a highly active palladium catalyst to effect the Suzuki coupling of aryl chlorides and other C-C forming reactions in water. In an attempt to develop a reusable, homogeneous system based on this complex, its stability against prolonged heating in different ionic liquids and polyethylenglycol (PEG) has been studied. It was found that the palladium complex decomposes in water, 1-butyl-1-methylimidazolium hexafluorophosphate and 1-butyl-1-methylimidazolium chloride to form palladium nanoparticles in the first two cases and PdCl₄²⁻ in the third case. In contrast, this cyclic palladium complex was stable upon extended heating in 1-butyl-2,3-dimethylimidazolium hexafluorophosphate and in PEG. The activity of this complex for the Suzuki and Sonogashira correlates with the stability of the complex, the activity in PEG being higher than any of the ionic liquids tested. Although the carbapalladacycle complex also decomposes in PEG upon reaction, the resulting Pd nanoparticles (2-5 nm size) are stabilized by PEG acting as ligand. In this way, a reusable, homogeneous system in PEG has been developed that is able to effect the Suzuki and Sonogashira couplings without the need of copper and phosphorous ligands, working at the open air.     

Synthesis of asymmetric 3,5-diaryl-4H-1,2,6-thiadiazin-4-ones via Suzuki–Miyaura and Stille coupling reactions

Asymmetric 3,5-diaryl substituted 4H-1,2,6-thiadiazin-4-ones can be prepared from 3,5-dichloro-4H-1,2,6-thiadiazin-4-one (1) via a multi-step protocol: selective nucleophilic mono-chloro substitution gives either the mono-methoxy or benzyloxy substituted mono-chlorothiadiazinones that can be phenylated via Suzuki–Miyaura coupling. Subsequent BBr₃ mediated dealkylation gives 3-hydroxy-5-phenyl-4H-1,2,6-thiadiazin-4-one (9) that can be activated by a modified Finkelstein halodehydroxylation via the triflate, enabling further arylation reactions using Suzuki–Miyaura or Stille coupling chemistry.     

Synthesis of all-cis-3-(2-diphenylphosphinoethyl)-1,2,4-tris(diphenylphosphinomethyl)cyclopentane (Ditricyp) from dicyclopentadiene

A new tetraphosphine, all-cis-3-(2-diphenylphosphinoethyl)-1,2,4-tris(diphenylphosphinomethyl)cyclopentane (Ditricyp), has been synthesised in seven steps from commercially available dicyclopentadiene. The ozonolysis of dicyclopentadiene occurred first on the double bond of the bicycloheptene moiety. A very high chemoselective ozonolysis was observed at −60 °C leading to the diol after reductive treatment. From this diol, cis,cis,cis-3-(2-hydroxyethyl)-1,2,4-tri(hydroxymethyl)cyclopentane was obtained after a second ozonolysis. Mesylation and substitution with Ph₂PLi led to the title tetradiphenylphosphine Ditricyp. The efficiency of this new tetraphosphine ligand for palladium-catalysed coupling reactions has been studied. Satisfactory results in terms of substrate/catalyst ratio have been obtained for Suzuki, Negishi and Sonogashira couplings and also for Heck vinylation reaction. After chromatographic separation, one enantiomer of this ligand associated to palladium was able to induce enantioselective allylic alkylation with modest enantiomeric excess.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.