Bromination of phenols in bromoperoxidase-catalyzed oxidations

Phenol and ortho-substituted derivatives furnish products of selective para-bromination, if treated with sodium bromide, hydrogen peroxide, and the vanadate(V)-dependent bromoperoxidase I from the brown alga Ascophyllum nodosum. Relative rates of bromination in morpholine-4-ethane sulfonic acid (MES)-buffered aqueous tert-butanol (pH 6.2) increase by a factor 32, as the ortho-substituent in a phenol changes from F via Cl, OCH₃, C(CH₃)₃, and H to CH₃. The polar effect in phenol bromination by the enzymatic method, according to a Hammett-correlation (ρ=−3), compares to reactivity of molecular bromine under identical conditions (ρ=−2). Hypobromous acid is not able to electrophilically substitute bromine for hydrogen at pH 6.2 in aqueous tert-butanol. The tribromide anion behaves in MES-buffered aqueous tert-butanol as electrophile (ρ∼−3), showing a similar polar effect in phenol bromination as molecular bromine.     

Non-chromatographic screening method for the determination of mercury species. Application to the monitoring of mercury levels in Antarctic samples

A simple non-chromatographic method for the determination of mercury (Hg²⁺), methylmercury (MeHg⁺), dimethylmercury (Me₂Hg), and phenylmercury (PhHg⁺) employing atomic fluorescence spectrometry (AFS) as detection technique was developed. Mercury species showed a particular behavior in the presence of several reagents. In a first stage SnCl₂ was employed for Hg²⁺ determination; in a second step, [Hg²⁺ + PhHg⁺] concentration was determined using SnCl₂ and UV radiation. MeHg⁺ decomposition was prevented adding 2-mercaptoethanol. In a third stage, [Hg²⁺ + PhHg⁺ + MeHg⁺] concentration was determined using K₂S₂O₈. Finally, the four species were determined employing NaBH₄. Reagents concentration and flow rates were optimized. The extraction technique of mercury species involved the use of 2-mercaptoethanol as ion-pair reagent. The limits of detection for Hg²⁺, PhHg⁺, MeHg⁺, and Me₂Hg were 1, 40, 68, and 99 ng L⁻¹ with a relative standard deviation of 1.5, 3.1, 4.7 and 5.8%, respectively. Calibration curve was linear with a correlation factor equal to 0.9995. The method was successfully applied to the determination of the mercury species in two Antarctic materials: IRMM 813 (Adamussium colbecki) and MURST-ISS-A2 (Antarctic Krill).     

Regioselective bromination of aromatic compounds with Br2/SO2Cl2 over microporous catalysts

A new selective brominating system Br₂/SO₂Cl₂/zeolite, has been discovered. Partially cation-exchanged Ca²⁺-Y zeolite efficiently catalyzes the selective para-bromination of neat chlorobenzene (CB) by Br₂/SO₂Cl₂ affording a CB conversion of ∼89% and a para-selectivity of ∼97%. During the bromination reaction, SO₂Cl₂ oxidizes HBr, prevents its accumulation within the zeolite pores and yields a more active brominating species. The Ca²⁺-Y catalyst was found to be stable under the bromination conditions, and can easily be regenerated by calcination. The Br₂/SO₂Cl₂/Ca²⁺-Y brominating system could be applicable to other activated aromatic compounds such as o-xylene, toluene and fluorobenzene.     

Kinetics of the aromatic hydroxylation with permonophosphoric acid

Oxidation of phenol, anisole and toluene with permonophosphoric acid in acetonitrile or water gives the corresponding ortho and para hydroxylated aromatics (HO-C₆H₄-X, X = OH, OMe, Me). The observed ortho :para ratio in a solvent acetonitrile are as follows: 5·0 with phenol, 3·5 with anisole and 2·0 with toluene. The oxidation rates for phenol and anisole in acetonitrile are expressed as: v = k″[ArH][H₃PO₅]²h_o, where h_o is the Hammett's acidity function and ArH is phenol or anisole. A mechanism involving a rate-determining attack of protonated dimeric perphosphoric acid 4 on aromatic carbon is presented and discussed.     

Double nucleophilic attack on η6-arene(pentamethylcyclopentadienyl)iridium dications. Routes from substituted benzenes to substituted cyclohexenes by addition of two hydrides and two protons

The complexes [(C₅Me₅)Ir(η⁶-arene)][BF₄]₂ (arene = toluene, toluene-d₈, t-butylbenzene, methoxybenzene, chlorobenzene, o-xylene, p-xylene, tetralin and phenol) were prepared from the arene and reduced with NaBH₄ to the η⁵-cyclohexadienyl complexes. Attack was exo at the arene and, with one exception, never at the substituent. Toluene showed no site preference but t-butylbenzene was attacked preferentially para, and chlorobenzene, ortho. Methoxybenzene was attacked ipso as well as ortho, meta (predominant), and para, and phenol gave only the meta-isomer. p-Xylene gave one isomer and o-xylene and tetralin gave two. Further reduction occurred on reaction with stronger hydride reducers (e.g., sodium bis(methoxyethoxy)dihydroaluminate) to give mixtures of 1- and 2-substituted cyclohexa-1,3-diene complexes (t-Bu, 2- ( > 95%); Me, 1- (25%), 2- (75%); Cl, 1- ( > 95%); and OMe, 1- (33%), 2- (67%)). The p-xylene complex gave a mixture of the η⁴-1,4-dimethylcyclohexa-1,3- and 1,4-diene complexes. Reaction of the cyclohexadiene complexes with HCl gas gave the free substituted cyclohexenes and [(C₅Me₅Ir)₂Cl₄]. The product from t-butylbenzene was predominantly (92%) the 3-substituted cyclohexene; that isomer (65%) and the 1-isomer (34%) were formed from toluene and the 1- (34%) and the 4-isomer (58%) were formed from chlorobenzene. Phenol gave only cyclohexanone. Overall these reactions yield the cyclohexene from the substituted benzene by addition of two hydrides and two protons and the iridium can be recycled.     

Metallic Re-Re bond formation in different MRe2O6 (MFe, Co, Ni) rutile-like polymorphs: The role of temperature in high-pressure synthesis

Different polymorphs of MRe₂O₆ (MFe, Co, Ni) with rutile-like structures were prepared using high-pressure high-temperature synthesis. For syntheses temperatures higher than ∼1573 K, tetragonal rutile-type structures (P4₂/mnm) with a statistical distribution of M- and Re-atoms on the metal position in the structure were observed for all three compounds, whereas rutile-like structures with orthorhombic or monoclinic symmetry, partially ordered M- and Re-ions on different sites and metallic Re-Re-bonds within Re₂O₁₀-pairs were found for CoRe₂O₆ and NiRe₂O₆ at a synthesis temperature of 1473 K. According to the XPS measurements, a mixture of Re⁺⁴/Re⁺⁶ and M²⁺/M³⁺ is present in both structural modifications of CoRe₂O₆ and NiRe₂O₆. The low-temperature forms contain more Re⁺⁴ and M³⁺ than the high-temperature forms. Tetragonal and monoclinic modifications of NiRe₂O₆ order with a ferromagnetic component at ∼24 K, whereas tetragonal and orthorhombic CoRe₂O₆ show two magnetic transitions: below ∼17.5 and 27 K for the tetragonal and below 18 and 67 K for the orthorhombic phase. Tetragonal FeRe₂O₆ is antiferromagnetic below 123 K.     

Ring transformation of cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium ion to the corresponding pyrrole derivatives via troponeimine intermediates: photo-induced autorecycling oxidizing reactions of some amines

Ring transformation of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan- 8(7H),10(9H)-dionylium tetrafluoroborate 4⁺·BF₄⁻ to 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]pyrrrole-8(7H),10(9H)-dionylium tetrafluoroborate 6a-d⁺·BF₄⁻ consists of the reaction of 4⁺·BF₄⁻ with amines and subsequent exchange of the counter-ion using aq. HBF₄. Reactions of 4⁺·BF₄⁻ with aniline and 4-substituted anilines afforded the corresponding pyrrole derivatives 6a-c⁺·BF₄⁻ directly in good yields. On the other hand, reaction of 4⁺·BF₄⁻ with benzylamine gave the troponeimine intermediate 9, which was not converted to 6d⁺·BF₄⁻ and reverted to 4⁺·BF₄⁻ by adding HBF₄; however, it was converted to 6d⁺·BF₄⁻ upon treatment with (COCl)₂ or SOCl₂, followed by exchange of the counter-ion. In a search for the characteristics of 9, inspection and comparison of the X-ray crystal analyses, NMR and UV-vis spectra, and CV measurement of 9 and N,N-disubstituted troponeimine derivatives 12 were carried out to suggest the remarkable structure of 12 having ionic C-O bonding between the imine-carbon atom and the oxygen atom of the barbituric acid moiety in the solid state. Thus, characteristics of 9 were ascribed to the sterically hindered and favorable conformation of N-protonated troponeimine intermediates. Furthermore, novel photo-induced oxidation reactions of a series of 4⁺·BF₄⁻, 5⁺·BF₄⁻, and 6a,e⁺·BF₄⁻ towards some amines under aerobic conditions were carried out to give the corresponding imines in 455-8362% yields [based on compounds 4⁺, 5⁺, and 6a,e⁺], suggesting the oxidation reaction occurs in an autorecycling process. Mechanistic aspects of the amine-oxidation reaction are also postulated.     

N,N′-Bis(aryl)pyridine-2,6-dicarboxamide complexes of ruthenium: Synthesis,structure and redox properties

Reaction of five N,N′-bis(aryl)pyridine-2,6-dicarboxamides (H₂L-R, where H₂ denotes the two acidic protons and R (R = OCH₃, CH₃, H, Cl and NO₂) the para substituent in the aryl fragment) with [Ru(trpy)Cl₃](trpy = 2,2′,2″-terpyridine) in refluxing ethanol in the presence of a base (NEt₃) affords a group of complexes of the type [Ru^II(trpy)(L-R)], each of which contains an amide ligand coordinated to the metal center as a dianionic tridentate N,N,N-donor along with a terpyridine ligand. Structure of the [Ru^II(trpy)(L-Cl)] complex has been determined by X-ray crystallography. All the Ru(II) complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on the [Ru^II(trpy)(L-R)] complexes shows a Ru(II)–Ru(III) oxidation within 0.16–0.33 V versus SCE. An oxidation of the coordinated amide ligand is also observed within 0.94–1.33 V versus SCE and a reduction of coordinated terpyridine ligand within −1.10 to −1.15 V versus SCE. Constant potential coulometric oxidation of the [Ru^II(trpy)(L-R)] complexes produces the corresponding [Ru^III(trpy)(L-R)]⁺ complexes, which have been isolated as the perchlorate salts. Structure of the [Ru^III(trpy)(L-CH₃)]ClO₄ complex has been determined by X-ray crystallography. All the Ru(III) complexes are one-electron paramagnetic, and show anisotropic ESR spectra at 77 K and intense LMCT transitions in the visible region. A weak ligand-field band has also been shown by all the [Ru^III(trpy)(L-R)]ClO₄ complexes near 1600 nm.     

Structure of aminonitrones and electronic effect of substituents on their acid-base properties

A series of para-substituted aromatic aminonitrones p-RC₆H₄C(NH₂)=N⁺(Me)O^– (R = NMe₂, H, Br, Cl, CF₃) have been prepared. Acidity constants of the conjugate acids RC₆H₄C(NH₂)N⁺(Me)OH at 25°C in a EtOH–H₂O mixture (5: 95) have been determined by potentiometric titration. A linear correlation between log (k_R/k_H) and σ_para values has been revealed, and a ρ²⁹⁸(σ_para) parameter has been determined as of 0.635.     

Pulsed fourier transform NMR of substituted aryltrimethyltin derivatives : III. Proton data at 100 MHz and the derived Hammett σ-constant of the trimethyltin group

Proton NMR data at 100 MHz are reported for thirteen para- and meta-substituted phenyltrimethyltin compounds, XC₆H₄Sn(CH₃)₃, where X = para-N(CH₃)₂, para-OCH₃, para-OC₂H₅, para-CH₃, meta-CH₃, -H, para-F, meta-OCH₃, para-Cl, para-Br, meta-F, meta-Cl and para-Sn(CH₃)₃. Correlation coefficients with Hammett σ-constants of greater than 0.95 are obtained with the methyltin proton chemical shifts and coupling constants to carbon [¹J(¹³C¹H)] and tin [²J(SnC¹H)]. Solvent effects and other extraneous factors invalidate comparisons of ? values in terms of the relative attenuation of the transmission of substituent effects through homologous carbon, silicon, germanium and tin systems, but coupling constant data reflect a diminution of ca. one tenthfold per bond in the order ?[C(1)Sn] > ? [SnC] > ? [CH]. Satisfactory correlations (r > 0.95) are obtained in this series of closely-related compounds among the conventionally recorded two-bond, ²J(SnC¹H) and the constituent, one-bond ¹J (Sn¹³C) and J(¹³C¹H) coupling constants, but the correlation coefficient for the comparison between the two one-bond couplings, ¹J(Sn¹³C) and ¹J(¹³C¹H) is lower (r = 0.872). Changes in the couplings at the methyltin carbon bond tin-119 atoms are interpreted in terms of isovalent hybridization; a model based upon effective nuclear charges is tested with respect to both NMR coupling constants and ¹¹⁹Sn Mössbauer Isomer shifts at tin and is invalidated. Proton and carbon-13 NMR, chemical shift and coupling constant data are used to derive a Hammett σ-constant for the para-trimethyltin group of ?0.14, and the significance of this value is discussed.     

Copper(I) complexes of N-(aryl)pyridine-2-aldimines: Spectral, electrochemical and catalytic properties

The reactions of N-(aryl)pyridine-2-aldimines (L-R; R = OCH₃, CH₃, H, Cl and NO₂), derived from pyridine-2-aldehyde and para-substituted anilines, with CuI in methanol under ambient conditions afford a series of brown complexes of the type [{Cu(L-R)I}₂]. The structure of the [{Cu(L-OCH₃)I}₂] complex has been determined by X-ray crystallography. In these dimeric complexes the two copper centers are linked through an iodo-bridge, and the L-R ligands are coordinated to the metal center through the pyridine-nitrogen and imine-nitrogen. All the complexes show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. These complexes also show an emission near 465 nm, whilst they are excited at 340 nm, with relatively poor quantum yields (φ ∼0.002 at 298 K). Cyclic voltammetry on all the complexes shows two successive Cu(I)-Cu(II) oxidations on the positive side of SCE, and a reduction of the coordinated imine ligand on the negative side. These copper(I) complexes are found to efficiently catalyze Suzuki type C-C coupling reactions.     

Alkyl and dialkylammonium tetrafluoroborate catalyzed cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane

Alkyl and dialkylammonium tetrafluoroborate promoted cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane (1) in DMSO-d₆ were studied. The isomerization equilibrium constant K are within the range of 3.74-3.30 from 22 to 47 °C. Thermodynamic parameters of ΔH° and ΔS° for the isomerization were −0.95 kcal/mol and −0.59 cal/mol-K respectively. The isomerization rate is first order in [cis-1] and second order in [R_nNH_4−nBF₄]. Both components of R_nNH_4−n⁺ and BF₄⁻ are essential for the catalytic cis-trans isomerization. The catalytic strength follows the decreasing order of ⁺H₃N(CH₂)₆NH₃⁺>n-C₈H₁₇NH₃⁺>n-C₁₆H₃₃NH₃⁺>Me₃CNH₃⁺>PhCH₂NH₃⁺>Et₂NH₂⁺?Ph₂CHNH₃⁺, Et₃NH⁺. Inversion region was observed in the plot of ln(k_f/T) versus (1/T) with the ceiling located at around 38 °C. The positive activation enthalpy of 9 kcal/mol was estimated at 22-32 °C. The activation enthalpy turns to be slightly negative at T>38 °C.     

Theoretical spectroscopy and metastability of BeS and its cation

Multiconfiguration self-consistent field and multiconfiguration reference interaction including the Davidson’s correction techniques were employed to calculate the potential energy curves (PECs) of the BeS/BeS⁺ electronic states correlating to the 4/5 lowest dissociation limits. After nuclear motion treatment, we deduced reliable spectroscopic data for the neutral and cationic bound states. For BeS, the transition moments and spin-orbit couplings were also evaluated and used later with the PECs to deduce the rovibronic transition probabilities and the radiative lifetimes in the low-lying states, and to investigate the unimolecular decomposition processes of BeS (X¹Σ⁺, A¹Π, ³Σ⁺ and B¹Σ⁺) leading to Be(¹S_g) + S(³P_g). The prominent mechanism is a spin-orbit induced predissociation via the repulsive BeS(1³Σ⁻) state. Finally, we give the single ionization spectrum of BeS (X¹Σ⁺) populating the BeS⁺ (X²Π, 1²Σ⁻, 1²Σ⁺, 1²Δ, 2²Σ⁺, 2²Π and 3²Π) electronic states. The adiabatic ionisation energy of BeS is estimated to be ∼9.15 eV.     

A new fluorogenic calix[4]arene N-dansylcarboxamide in the cone conformation for selective optical recognition of mercury(II)

A novel fluorogenic calix[4]arene dansylcarboxamide in the cone conformation has been synthesized as the disodium salt and employed in optical recognition of mercury(II). In extraction from aqueous solutions with high content of competing Na⁺ (C_Na+ ∼0.1 M; pH 5.0, acetate buffer) into CHCl₃, the fluoroionophore allowed for detection of 8.0 × 10⁻⁷ M Hg²⁺ (1:1 complex; ) with high selectivity over many other relevant metal ions.     

Preconcentration and speciation of inorganic and methyl mercury in waters using polyaniline and gold trap-CVAAS

Applicability of polyaniline (PANI) has been investigated for the preconcentration and speciation of inorganic mercury (Hg²⁺) and methyl mercury (CH₃Hg⁺) in various waters (ground, lake and sea waters). Preliminary experiments (batch) with powdered PANI for the quantitative removal of both Hg²⁺ and CH₃Hg⁺ showed that the retention of Hg²⁺ was almost independent of pH while a pH dependent trend from pH 1 to 12 was seen for CH₃Hg⁺ with maximum retention at pH > 5. Time dependence batch studies showed that a contact time of 10 min was sufficient to reach equilibrium. The K_d values were found to be ∼8 × 10⁴ and ∼7 × 10³ for Hg²⁺ and CH₃Hg⁺, respectively.Subsequently column experiments were carried out with PANI and the separation of the species was carried out by selective and sequential elution with 0.3% HCl for CH₃Hg⁺ and 0.3% HCl-0.02% thiourea for Hg²⁺. This was then followed by further pre-concentration of mercury on a gold trap and its determination by CVAAS. The uptake efficiency studies showed that the PANI column was able to accumulate up to 100 mg Hg²⁺/g and 2.5 mg CH₃Hg⁺/g. This method allows both preconcentration and speciation of mercury with preconcentration factors around 120 and 60 for Hg²⁺ and CH₃Hg⁺, respectively. The interfering effects of various foreign substances on the retention of mercury were investigated.     

Displacement of neutral nitrogen donors by chloride in [Pt(SNS)(R-py)](ClO4)2 (SNS = 2,6-bis(methylthiomethyl)pyridine; R-py = pyridines): A reactivity comparison between meta- and para-substituted pyridines

The kinetics of the process [Pt(SNS)(R-py)]²⁺ + Cl⁻ → [Pt(SNS)Cl]⁺ + R-py {SNS = 2,6-bis(methylsulfanylmethyl)pyridine; R-py = meta- or para-substituted pyridines covering a wide range of basicity} were studied in methanol at 25 °C. The reactions obey the usual two-term rate law observed in the substitution reactions of square-planar d⁸ complexes. The plots of log k₂ {k₂ = second-order rate constants} against the pK_a of the heterocycles conjugate acids highlighted a different sensitivity of the two groups of N-donors to changes in basicity, thepara-substituted pyridines (4R-py) showing a weaker dependence on pK_a than the meta-substituted (3R-py). The results have been explained on the basis of a π-acidity difference between 3R-py and 4R-py which influences the reaction ground state.     

Synthesis, structural characterization and Li ion conductivity of a new vanado-molybdate phase, LiMg3VMo2O12

A new vanado-molybdate LiMg₃VMo₂O₁₂ has been synthesized, the crystal structure determined an ionic conductivity measured. The solid solution Li_2−zMg_2+zV_zMo_3−zO₁₂ was investigated and the structures of the z=0.5 and 1.0 compositions were refined by Rietveld analysis of powder X-ray (XRD) and powder neutron diffraction (ND) data. The structures were refined in the orthorhombic space group Pnma with a∼5.10, b∼10.4 and c∼17.6 Å, and are isostructural with the previously reported double molybdates Li₂M₂(MoO₄)₃ (M=M²⁺, z=0). The structures comprise of two unique (Li/Mg)O₆ octahedra, (Li/Mg)O₆ trigonal prisms and two unique (Mo/V)O₄ tetrahedra. A well-defined 1:3 ratio of Li⁺:Mg²⁺ is observed in octahedral chains for LiMg₃VMo₂O₁₂. Li⁺ preferentially occupies trigonal prisms and Mg²⁺ favours octahedral sheets. Excess V⁵⁺ adjacent to the octahedral sheets may indicate short-range order. Ionic conductivity measured by impedance spectroscopy (IS) and differential scanning calorimetry (DSC) measurements show the presence of a phase transition, at 500-600 °C, depending on x. A decrease in activation energy for Li⁺ ion conductivity occurs at the phase transition and the high temperature structure is a good Li⁺ ion conductor, with σ=1×10⁻³-4×10⁻² S cm⁻¹ and E_a=0.6 to 0.8 eV.     

A green and sensitive method to determine phenols in water and wastewater samples using an aqueous two-phase system

A greener and more sensitive spectrophotometric procedure has been developed for the determination of phenol and o-cresol that exploits an aqueous two-phase system (ATPS) using a liquid-liquid extraction technique. An ATPS is formed mostly by water and does not require organic solvent. Other ATPS components used in this study were the polymer, polyethylene oxide, and some salts (i.e., Li₂SO₄, Na₂SO₄ or K₂HPO₄ + KOH). The method is based on the reaction between phenol, sodium nitroprusside (NPS) and hydroxylamine hydrochloride (HL) in an alkaline medium (pH 12.0), producing the complex anion [Fe₂(CN)₁₀]¹⁰⁻ that spontaneously concentrates in the top phase of the system. The linear range was 1.50-500 μg kg⁻¹ (R ≥ 0.9997; n = 8) with coefficients of variation equal to 0.38% for phenol and 0.30% for o-cresol (n = 5). The method yielded limits of detection (LODs) of 1.27 and 1.88 μg kg⁻¹ and limits of quantification (LOQs) of 4.22 and 6.28 μg kg⁻¹ for phenol and o-cresol, respectively. Recoveries between 95.7% and 107% were obtained for the determination of phenol in natural water and wastewater samples. In addition, excellent agreement was observed between this new ATPS method and the standard 4-aminoantipyrine (4-AAP) method.     

A direct fluorescence-on chemo-sensor for selective recognition of Zn(II) by a lower rim 1,3-di-derivative of calix[4]arene possessing bis-{N-(2-hydroxynaphthyl-1-methylimine)} pendants

The bis-{N-(2-hydroxynaphthyl-1-methylimine)} anchored 1,3-di-derivative of lower rim p-tert-butyl-calix[4]arene possessing a N₂O₂, N₂O₄ or N₂O₆ binding core was found to be selective for Zn(II) ions even at ?60 ppb by eliciting fluorescence-on behaviour while the other ions, viz., Ti⁴⁺, VO²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Mg²⁺, Cd²⁺ and Hg²⁺ caused no change in the fluorescence. The reaction between 1 and Zn²⁺ was found to be stoichiometric with the formation of a 1:1 complex; while H⁺ quenched the fluorescence of the complex, OH⁻ restored it. The studies of the 1:1 isolated complexes of Zn²⁺, Ni²⁺ and Cu²⁺ augmented the results.     

Half-sandwich ruthenium(II) complexes containing a tricyclic β-iminophosphine ligand: Catalytic activity in Diels–Alder reactions

The diastereoselective κ²-P,N-coordination of a chiral tricyclic β-iminophosphine ligand to the half-sandwich ruthenium(II) fragments [RuCl(η⁶-arene)]⁺ (arene = C₆H₆, p-cymene, 1,3,5-C₆H₃Me₃, C₆Me₆), [Ru(η⁶-p-cymene)(NCMe)]²⁺ and [Ru(η⁵-C₅H₅)(NCMe)]⁺ is described. The structures of the resulting mono- and dicationic cymene derivatives have been confirmed by X-ray crystallography. Studies on the catalytic activity of these Ru(II) compounds in Diels–Alder cycloaddition processes are also reported.