Degradation of Single‐Layer and Few‐Layer Graphene by Neutrophil Myeloperoxidase

Biodegradability of graphene is one of the fundamental parameters determining the fate of this material in vivo. Two types of aqueous dispersible graphene, corresponding to single‐layer (SLG) and few‐layer graphene (FLG), devoid of either chemical functionalization or stabilizing surfactants, were subjected to biodegradation by human myeloperoxidase (hMPO) mediated catalysis. Graphene biodegradation was also studied in the presence of activated, degranulating human neutrophils. The degradation of both FLG and SLG sheets was confirmed by Raman spectroscopy and electron microscopy analyses, leading to the conclusion that highly dispersed pristine graphene is not biopersistent.     

Spectroscopic Characteristics of Differently Produced Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) synthesized with different methods are investigated by using multiple characterization techniques, including Raman scattering, optical absorption, and X‐ray absorption near edge structure, along with X‐ray photoemission by following the total valence bands and C 1s core‐level spectra. Four different SWNT materials (produced by arc discharge, HiPco, laser ablation, and CoMoCat methods) contain nanotubes with diameters ranging from 0.7 to 2.8 nm. The diameter distribution and the composition of metallic and semiconducting tubes of the SWNT materials are strongly affected by the synthesis method. Similar sp² hybridization of carbon in the oxygenated SWNT structure can be found, but different surface functionalities are introduced while the tubes are processed. All the SWNTs demonstrate stronger plasmon resonance excitations and lower electron binding energy than graphite and multiwalled carbon nanotubes. These SWNT materials also exhibit different valence‐band X‐ray photoemission features, which are considerably affected by the nanotube diameter distribution and metallic/semiconducting composition.     

A Computational Study of a Single‐Walled Carbon‐Nanotube‐Based Ultrafast High‐Capacity Aluminum Battery

Exploring suitable electrode materials is a fundamental step toward developing Al batteries with enhanced performance. In this work, we explore using density functional theory calculations the feasibility of single‐walled carbon nanotubes (SWNTs) as a cathode material for Al batteries. Carbon nanotubes with hollow structures and large surface area are able to overcome the difficulty of activating the opening of interlayer spaces as observed in graphite electrode during the first intercalation cycle. Our results show that AlCl₄ binds strongly with the SWNT to result in an energetically and thermally stable AlCl₄‐adsorbed SWNT system. Diffusion calculations show that the SWNT system allows ultrafast diffusion of AlCl₄ with a more favorable inner surface diffusion than outer surface diffusion. Our charge‐density difference and Bader atomic charge analysis confirm the oxidation of SWNT upon adsorption of AlCl₄, which shows a similar behavior to the previously studied graphite cathode. The average open‐circuit voltage and AlCl₄ storage capacity increases with increasing SWNT diameter and can be as high as 1.96 V and 275 mA h g⁻¹ in (25,25) SWNT relative to graphite (70 mA h g⁻¹). All of these properties show that SWNTs are a potential cathode material for high‐performance Al batteries and should be explored further.     

Improving dispersion and integration of single‐walled carbon nanotubes in epoxy composites by using a reactive noncovalent dispersant

Uniform dispersion and strong interfacial interaction are two critical prerequisites for application of single‐walled carbon nanotubes (SWNTs) in polymer composites. To endow the composites with multifunctional feature, no damage on the chemical/electronic structure of SWNTs is also usually required. With these ends in view, two epoxide‐containing pyrene derivatives (EpPys) were designed, synthesized, and used as reactive noncovalent dispersants for developing multifunctional epoxy/SWNT composites. One having longer chain length between epoxide group and pyrene moiety, that is, EpPy‐16, shows higher dispersing efficiency and provides the nanotube dispersion with better stability, thus picking up for subsequent studies. Systematic characterization on SWNT/EpPy‐16 hybrid demonstrates that 13.2 wt % of EpPy‐16 is adsorbed on the SWNT surface through strong π‐stacking interaction, and intrinsic electronic structure of SWNTs is basically reserved. The solution‐based process adopted here preserves the good SWNT dispersing state in dispersion into the composites. Simultaneously, enhanced interfacial interaction is also realized by using EpPy‐16, which interacts noncovalently with SWNT but connects covalently to epoxy network. As a result, the composites acquire 37 and 22% increments in tensile strength and Young's modulus, respectively, relative to that of neat resin. A low‐electrical percolation threshold of 0.1 wt % SWNTs and improved thermal properties were also observed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of single‐wall‐carbon‐nanotube‐doped emeraldine salt and base polyaniline nanocomposites

Nanocomposites of polyaniline (PANI) and single‐wall carbon nanotubes (SWNTs) were prepared and characterized via resonance Raman and electronic absorption spectroscopy (ultraviolet–visible/near‐infrared). The chemical synthesis of PANI was performed in the presence of SWNTs in concentrations ranging from 10 to 50 wt % (SWNT/PANI). The obtained materials were hydrophilic, homogeneous composite compounds. The chemical interaction between PANI (in the conducting emeraldine salt form and in the insulating emeraldine base form) and metallic and semiconducting nanotubes was investigated. The emeraldine salt form of the polymer was significantly stabilized in the composite in comparison with plain PANI. A selective electronic interaction process between PANI and metallic SWNTs was found. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 815–822, 2005     

Hybrids of Copolymers of Fluorene and C60‐Carrying‐Carbazole with Semiconducting Single‐Walled Carbon Nanotubes

Three different copolymers of C₆₀‐carrying‐carbazole and fluorene units with different copolymer composition ratios were designed and synthesized. On the basis of photoluminescence, atomic force microscopy, and Vis‐NIR and Raman spectroscopic analysis, we found that these copolymers solubilize only semiconducting single‐walled carbon nanotubes (sem‐SWNTs) to form copolymer/sem‐SWNT hybrids, in which energy transfer from the copolymer/C₆₀ moieties to the SWNTs was revealed. By comparing two possible hybrid structures with molecular‐mechanics simulations, the greatest stabilization was found when the C₆₀ moieties lay on the sem‐SWNT surfaces.     

Grafting of aldehyde structures to single‐walled carbon nanotubes for application in phenolic resin‐based composites

Grafting of aldehyde structures to single‐walled carbon nanotubes (SWNTs) has been carried out to endow the nanotubes with appropriate wettability. The results of Fourier transform infrared (FTIR) spectroscopy, ultraviolin‐visible‐near infrared (UV‐VIS‐NIR) spectroscopy, and Raman spectroscopy provide the supporting evidence of aldehyde structures covalently attached to SWNTs. The improved wettability of aldehyde‐functionalized SWNTs (f‐SWNTs) was demonstrated by their good dispersion in organic medium, namely, ethanol and phenolic resin. The prospective covalent bonding between aldehyde structures on the surfaces of f‐SWNTs and phenolic resin makes it possible to prepare an integrated composite with the enhanced‐interfacial adhesion. The f‐SWNT composites, therefore, show much higher average values of dσ/dW_CNT and dE/dW_CNT (i.e., tensile strength and Young's modulus per unit weight fraction) compared with the composites filled with pristine SWNTs or MWNTs. The respective maxima are 9680 MPa and 320 GPa. It is thus feasible for f‐SWNTs to prepare the moderately enhanced but lightweight phenolic composites. Furthermore, the incorporation of f‐SWNTs does not limit the application of phenolic resin as insulation material. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6135–6144, 2009     

Direct Bioelectrocatalysis of PQQ‐Dependent Glucose Dehydrogenase

The direct bioelectrocatalysis was demonstrated for pyrroloquinoline quinone‐dependent glucose dehydrogenase (PQQ‐dependent GDH) covalently attached to single‐walled carbon nanotubes (SWNTs). The homogeneous ink‐like SWNT suspension was used for both creating the SWNT network on the microelectrode carbon surface and for enzyme immobilization. Functionalization of the SWNT surface by forming active ester groups was found to considerably enhance SWNT solubility in water with a range from 0.1 to 1.0 mg/mL. The PQQ‐dependent GDH immobilized on the surface of the SWNTs exhibited fast heterogeneous electron transfer with a rate constant of 3.6 s^?1. Moreover, the immobilized PQQ‐dependent GDH retained its enzymatic activity for glucose oxidation. A fusion of PQQ‐dependent GDH with SWNTs has a great potential for the development of low‐cost and reagentless glucose sensors and biofuel cells.     

Chemical Adsorption onto an ITO Substrate of Single‐Wall Carbon Nanotube Functionalized by Carboxylic Groups as an Efficient Support for Electrocatalyst

A single‐wall carbon nanotube functionalized by carboxylic groups (SWNT‐CA) was found to be adsorbed on an indium tin oxide (ITO) electrode by chemical interaction between carboxylic groups and the ITO surface. The adsorption experiments indicated that the narrow pH conditions (around pH 3.0) exist for its adsorption which is restricted by preparation of stable fluid dispersion (favorable at higher pH) and by the chemical interaction (favorable at lower pH). Atomic force microscopic (AFM) measurements suggest that fragmented SWNT‐CA are adsorbed, primarily lying on the surface. Electrochemical impedance analysis indicated that an electrochemical double layer capacitance of the SWNT‐CA/ITO electrode is considerably higher than that for the ITO electrode, suggesting that the interfacial area between the electrode surface and the electrolyte solution is enlarged by the SWNT‐CA layer. Pt particles were deposited as a catalyst on the bare ITO and SWNT‐CA‐coated ITO (SWNT‐CA/ITO) electrodes to give respective Pt‐modified electrodes (denoted as a Pt/ITO electrode and a Pt/SWNT‐CA/ITO electrode, respectively). The cathodic current for the Pt/SWNT‐CA/ITO electrode was 1.7 times higher than that for the Pt/ITO electrode at 0.0 V, showing that the Pt/SWNT‐CA/ITO electrode works more efficiently for O₂ reduction at 0.0 V due to the SWNT‐CA layer. The enhancement by the SWNT‐CA layer is also effective for electrocatalytic proton reduction. It could be ascribable to the enlarged interfacial area between the electrode surface and the electrolyte solution.     

Preparation of single‐walled carbon nanotubes‐induced poly(p‐oxybenzoyl) crystals

Crystallization of oligomers was applied for the preparation of single‐walled carbon nanotubes (SWNTs)/poly(p‐oxybenzoyl) (POB) crystals using SWNTs as a nucleating agent. Polymerization conditions were investigated to induce the crystallization of POB oligomers through SWNTs. SWNTs/POB plate‐like or lozenge‐shaped crystals were successfully prepared by direct polymerization of p‐hydroxybenzoic acid (HBA) in a mixed solvent of DMF/Py with TsCl in the presence of functionalized SWNTs. The size of the plate‐like crystals were ～200 nm to 3 μm. The crystals consisted of some layers, ～3 nm thick plates. Model reactions showed that esterification reactions proceed between functionalized SWNTs and HBA monomers in the polymerization system. The obtained crystals exhibited unique morphology and high crystallinity, producing a novel SWNT/POB hybrid. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1265–1277, 2008     

Electorchemical Studies of Cytochrome c on Electodes Modified by Single—Wall Carbon Naotubes

Single-wall carbon nanotubes(SWNTs) modified gold electrodes were prepared by using two different methods.The electrochemical behavior of cytochrome c on the modified gold electrodes was investigated.The first kind of SWNT-modified electrode (noted as SWNT/Au electrode)was prepared by the adsorption of carboxylterminated SWNTs from DMF dispersion on the gold electrode.The oxidatively processed SWNT tips were covalently modified by coupling with amines (AET) to form amide linkage.Via Au-S chemical bonding,the self-assembled monolayer of thiol-unctionalized nanotubes on gold surface was fabricated so as to prepare the others SWNT-modified electrode (noted as SWNT/AET/Au electrode).It was shown from cyclic voltammetry cxperiments that cytochrome c exhibited direct electrochemical responses on the both electrodes, but only the current of controlled diffusion existed on the SWNT/Au electrode while both the currents of controlled diffusion and adsorption of cytochrome c occurred on the SWNT/AET/Au electrode.Photoelastic Modulation Infared Reflection Absorpthion Spectroscopy (PEM-IRRAS) and Quartz Crystal Microbalance (QCM) were employed to verify the adsorption of SWNTs on the gold electrodes.The results proved that SWNTs could enhance the direct electron transfer proecss between the electrodes and redox proteins.     

Aligned single‐wall carbon nanotube polymer composites using an electric field

While high shear alignment has been shown to improve the mechanical properties of single‐wall carbon nanotube (SWNT)‐polymer composites, this method does not allow for control over the electrical and dielectric properties of the composite and often results in degradation of these properties. Here, we report a novel method to actively align SWNTs in a polymer matrix, which permits control over the degree of alignment of the SWNTs without the side effects of shear alignment. In this process, SWNTs were aligned via AC field‐induced dipolar interactions among the nanotubes in a liquid matrix followed by immobilization by photopolymerization under continued application of the electric field. Alignment of SWNTs was controlled as a function of magnitude, frequency, and application time of the applied electric field. The degree of SWNT alignment was assessed using optical microscopy and polarized Raman spectroscopy, and the morphology of the aligned nanocomposites was investigated by high‐resolution scanning electron microscopy. The structure of the field induced aligned SWNTs was intrinsically different from that of shear aligned SWNTs. In the present work, SWNTs are not only aligned along the field, but also migrate laterally to form thick, aligned SWNT percolative columns between the electrodes. The actively aligned SWNTs amplify the electrical and dielectric properties of the composite. All of these properties of the aligned nanocomposites exhibited anisotropic characteristics, which were controllable by tuning the applied field parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1751–1762, 2006     

Real‐Time Nitrophenol Detection Using Single‐Walled Carbon Nanotube Based Devices

Single‐walled carbon nanotube (SWNT) based devices have been developed for the real‐time detection of nitrophenols in aqueous solution. SWNTs are assembled to electrodes using AC dielectrophoresis technique. The SWNT devices exhibit not only high sensitivity to nitrophenol compounds, but also good reusability. Charge transfer between nitro group and SWNTs, and the metal‐nanotube interface modification are hypothesized to be the possible origins of conductance change. These results indicated that the SWNT devices can be utilized as a simple, low cost, sensitive, and reusable platform for real‐time detection of nitrophenol compounds.     

Pyrene‐Based Fluorescent Ambidextrous Gelators: Scaffolds for Mechanically Robust SWNT–Gel Nanocomposites

With the rapid progress in the development of supramolecular soft materials, examples of low‐molecular‐weight gelators (LMWGs) with the ability to immobilise both water and organic solvents by the same structural scaffold are very limited. In this paper, we report the development of pyrene‐containing peptide‐based ambidextrous gelators (AGs) with the ability to efficiently gelate both organic and aqueous solvents. The organo‐ and hydrogelation efficiencies of these gelators are in the range 0.7–1.1 % w/v in various organic solvents and 0.5–5 % w/v in water at certain acidic pH values (pH 2.0–4.0). Moreover, for the first time, AGs have been utilised to prepare single‐walled carbon‐nanotube (SWNT)‐included soft nanocomposites in both hydro‐ and organogel matrices. The influence of different non‐covalent interactions such as hydrogen bonding, hydrophobic, π–π and van der Waals interactions in self‐assembled gelation has been studied in detail by circular dichroism, FTIR, variable‐temperature NMR, 2D NOESY and luminescence spectroscopy. Interestingly, the presence of the pyrene moiety in the structure rendered these AGs intrinsically fluorescent, which was quenched upon successful integration of the SWNTs within the gel. The prepared hydro‐ and organogels along with their SWNT‐integrated nanocomposites are thermoreversible in nature. The supramolecular morphologies of the dried gels and SWNT–gel nanocomposites have been studied by transmission electron microscopy, fluorescence microscopy and polarising optical microscopy, which confirmed the presence of three‐dimensional self‐assembled fibrillar networks (SAFINs) as well as the integrated SWNTs. Importantly, rheological studies revealed that the inclusion of SWNTs within the ambidextrous gels improved the mechanical rigidity of the resulting soft nanocomposites up to 3.8‐fold relative to the native gels.     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Cluster‐Based Self‐Assembly Route toward MoO3 Single‐Walled Nanotubes

MoO₃ has a unique rigid double‐layer structure, which makes it a real challenge to prepare nanotubular structures. The controlled synthesis of MoO₃ single‐walled nanotubes (SWNTs) is achieved through a cluster‐based self‐assembly route on the dodecanethiol/water interface. Various factors are studied at length, including precursor type, reaction time, temperature, pH value, and their influence on the morphology of products. The concept of “self‐assembly—from simple clusters to nanostructures” is proposed here based on preliminary results from the synthesis of MoO₃ SWNTs, which provides a new aspect for traditional synthetic chemistry of nanomaterials and polyoxometalates.     

Van Der Waals heterogeneous layer‐layer carbon nanostructures involving π···H‐C‐C‐H···π···H‐C‐C‐H stacking based on graphene and graphane sheets

Noncovalent interactions involving aromatic rings, such as π···π stacking, CH···π are very essential for supramolecular carbon nanostructures. Graphite is a typical homogenous carbon matter based on π···π stacking of graphene sheets. Even in systems not involving aromatic groups, the stability of diamondoid dimer and layer‐layer graphane dimer originates from C − H···H − C noncovalent interaction. In this article, the structures and properties of novel heterogeneous layer‐layer carbon‐nanostructures involving π···H‐C‐C‐H···π···H‐C‐C‐H stacking based on [n ]‐graphane and [n ]‐graphene and their derivatives are theoretically investigated for n = 16–54 using dispersion corrected density functional theory B3LYP‐D3 method. Energy decomposition analysis shows that dispersion interaction is the most important for the stabilization of both double‐ and multi‐layer‐layer [n ]‐graphane@graphene. Binding energy between graphane and graphene sheets shows that there is a distinct additive nature of CH···π interaction. For comparison and simplicity, the concept of H‐H bond energy equivalent number of carbon atoms (noted as NHEQ), is used to describe the strength of these noncovalent interactions. The NHEQ of the graphene dimers, graphane dimers, and double‐layered graphane@graphene are 103, 143, and 110, indicating that the strength of C‐H···π interaction is close to that of π···π and much stronger than that of C‐H···H‐C in large size systems. Additionally, frontier molecular orbital, electron density difference and visualized noncovalent interaction regions are discussed for deeply understanding the nature of the C‐H···π stacking interaction in construction of heterogeneous layer‐layer graphane@graphene structures. We hope that the present study would be helpful for creations of new functional supramolecular materials based on graphane and graphene carbon nano‐structures. © 2017 Wiley Periodicals, Inc.     

Single‐Walled Carbon Nanotube Based Real‐Time Organophosphate Detector

A novel single‐walled carbon nanotube (SWNT) based biosensor for real‐time detection of organophosphate has been developed. Horizontally aligned SWNTs are assembled to desirable electrodes using AC dielectrophoresis technique. Organophosphorus hydrolase (OPH) immobilized on the SWNTs by nonspecific binding triggers enzymatic hydrolysis of organophosphates (OPs), such as paraoxon, consequently causing a detectable change in the conductance of the SWNTs. The conductance change is found to be correlated to the concentration of organophosphate. Our results suggest the novel biosensor has great potential to serve as a simple and reusable platform of sensing organophosphate on a real‐time basis.     

Separation of Semiconducting Single‐Walled Carbon Nanotubes by Using a Long‐Alkyl‐Chain Benzenediazonium Compound

We designed and synthesized 4‐dodecyloxybenzenediazonium tetrafluoroborate ( 1 ), which preferentially reacts with metallic single‐walled carbon nanotubes (SWNTs) by kinetic control. We first determined the suitable experimental conditions for the preferential reaction of 1 with individually dissolved SWNTs by monitoring the decrease in absorbance for the metallic SWNT in the range of 400–650 nm in the absorption spectrum of the SWNTs. The reacted SWNTs were thoroughly rinsed with THF to obtain THF‐insoluble SWNTs. The Raman spectrum of the THF‐insoluble SWNTs showed a strong peak near 180 cm^?1, which corresponds to a semiconducting breathing band. The metallic breathing bands (≈220 cm^?1) and Breit–Wingner–Fano (BWF) modes (1520 cm^?1) corresponding to the metallic SWNTs were much weaker than those of the pristine SWNTs. We also confirmed that metallic peaks in the range of 400–650 nm in the absorption spectrum of THF‐insoluble SWNTs that were individually dissolved in an aqueous micelle of sodium cholate were almost nondetectable. All the results indicate that the THF‐insoluble SWNTs are semiconducting.     

Fabrication,Characterization, and Application of ‘Sandwich‐Type’ Electrode Based on Single‐Walled Carbon Nanotubes and Room Temperature Ionic Liquid

The much‐enhanced electrochemical responses of potassium ferricyanide and methylene blue (MB) were firstly explored at the glassy carbon electrode modified with single‐walled carbon nanotubes (SWNT/GCE), indicating the distinct electrochemical activity of SWNTs towards electroactive molecules. A hydrophobic room temperature ionic liquid (RTIL), 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆), was used as electrode modification material, which presented wide electrochemical windows, proton permeation and selective extraction ability. In consideration with the advantages of SWNTs and RTIL in detecting target molecules (TMs), a novel strategy of ‘sandwich–type’ electrode was established with TMs confined by RTIL between the SWNT/GCE and the RTIL membrane. The strategy was used for electrochemical detection of ascorbic acid (AA) and dopamine (DA), and detection limits of 400 and 80 fmol could be obtained, respectively. The selective detection of DA in the presence of high amount of AA could also be realized. This protocol presented many attractive advantages towards voltammetric detection of TMs, such as low sample demand, low cost, high sensitivity, and good stability.