制备条件对金红石型SO42-/TiO2微粒气相光催化活性的影响

以Ti(SO4)2酸溶液为前驱体．氢氧化钠作沉淀剂，采用沉淀法低温焙烧制备了SO4^2-掺杂的金红石型TiO2微粒．用光催化降解正庚烷为反应模型．结合BET、TG-DTA、IR、XRD等表征手段，探讨了制备条件对金红石型SO4^2-／TiO2微粒气相光催化活性的影响，并优化实验条件获得了光催化性能优良的金红石型SO4^2-／TiO2微粒．     

微波加热反应制备纳米TiO2混晶及其光催化性能

微波加热反应制备纳米TiO2混晶及其光催化性能;纳米二氧化钛;混晶;微波加热;光催化性能     

掺铁纳米TiO_2的制备及其光催化性能

以TiC l4为原料,采用微波加热与常规加热2步合成法制备掺铁纳米TiO2。用X射线粉末衍射(XRD)、透射电镜(TEM)、紫外可见吸收光谱(UV-V is)、光电子能谱(XPS)等测试技术对其进行了表征。结果表明,所制得的掺铁纳米TiO2是以锐钛矿为主相的混晶,平均粒径约为10 nm,适量Fe3+的掺杂能促进金红石相变,抑制锐钛矿晶粒的生长,使Ti2p电子结合能升高0.3 eV,并使TiO2吸光能力增强,带边吸收向可见光区移动。在UVA段(320~400 nm)光照下,通过对维生素VB12的光催化降解,发现掺入摩尔分数为0.5%的Fe3+的纳米TiO2能明显提高其光催化活性,使维生素B12的降解速率提高2.3倍。     

室温下用新型NH4CO3沉淀剂制备纳米TiO2光催化剂

用Ti(SO4)2为原料，NH4HCO3为沉淀剂，室温下制备了活性较高、粒径9nm的TiO2催化剂。考察了不同原料浓度、沉淀pH值、焙烧温度、焙烧时间等制备条件对TiO2粒度及其光催化降解十二烷基苯磺酸钠催化活性的影响。     

C2H4的微波场助气相光催化氧化

用溶胶－凝胶法制备了多孔性TiO2和SO4^2-/TiO2催化剂,对其结构进行了表征,并以C2H4为模型反应物考察了微波对催化剂的光催化氧化反应性能的影响。在微波场中TiO2和SO34^2-/TiO2催化剂的光催化氧化性能得到明显改善,无微波场时乙烯转化率分别为20％（TiO2)和41％（SO4^2-/TiO2),而在微波辐射和紫外光的同时作用下乙烯转化率分别提高到27％和62％,SO4^2-／TiO2催化剂的微波场助效应更为显著。     

SO_4~(2-)/Ce-TiO_2光催化降解二甲基二氯乙烯基磷酸酯

以钛酸四丁酯 (Ti(OBu) 4 )、Ce(NO3 ) 3 、H2 SO4为主要原料 ,采用溶胶 凝胶法制备了SO2 -4/Ce TiO2 光催化剂 ,用XRD、IR、BET、XPS、TG DTA等测定技术对所制得的试样进行了表征 ,并将其用于光催化降解二甲基二氯乙烯基磷酸酯的稀释液。结果表明 ,SO2 -4/Ce TiO2 中TiO2 以锐钛矿晶型存在 ,并且具有超强酸特征 ,当n(Ce) /n(TiO2 ) =0 0 0 5 ,c(H2 SO4) =0 5mol/L时 ,焙烧温度为 5 0 0℃是最佳制备条件 ,其光催化降解性能较Ce TiO2 有明显提高。     

水解制备球形TiO2及其水解过程动力学

以硫酸钛(Ti(SO4)2)为前驱物水解得到超细球形TiO2. 研究了水解过程中前驱物浓度和体系温度对水解速率的影响, 并对实验值进行了拟合, 得到水解TiO2的质量分数与水解时间呈良好的指数关系, 根据Avrami方程进一步验证了拟合的可靠性. 分析了水解介质的影响作用, 确定介电常数和zeta电位也是影响水解速率的重要因素, 因此可通过改变溶剂成分来调节介电常数和zeta电位, 从而达到控制Ti(SO4)2水解速率的目的. 实验结果表明, Ti(SO4)2水解制备TiO2的过程中, 较低的前驱物浓度, 较高的水解温度和合适的溶剂体系有利于得到粒径分布窄、分散性好的TiO2.     

电纺丝-气相沉积法制备碳包覆TiO_2纳米纤维及其光催化行为的研究

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸正丁酯为前躯体,以静电纺丝法制备了PVP/Ti(OC4H9)4纤维。550℃下,空气氛中焙烧双组分纤维,得到直径60～300nm的TiO2纳米纤维。继而以气相沉积法制得碳包覆TiO2纳米纤维。用红外吸收光谱(FTIR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等对纳米纤维进行了表征。与TiO2纳米纤维、TiO2纳米粉体相比,气相沉积法制备的碳包覆TiO2纳米纤维在光分解亚甲基蓝上表现出更好的催化性能。     

微波加热制备泡沫镍负载La3+掺杂纳米TiO2及其光催化降解甲醛的性能

 采用常规加热和微波加热方法制备了两种泡沫镍负载La3+掺杂的纳米TiO2光催化剂,以甲醛光催化降解为模型反应,考察了制备方法和掺杂La3+对催化剂催化性能的影响,并采用扫描电镜、透射电镜、 X射线衍射和能量分散式光谱分析对催化剂进行了表征. 结果表明,微波加热法制备的纳米TiO2具有典型的锐钛矿型晶体结构,其粒径均匀且明显小于常规加热法制备的催化剂. 泡沫镍负载1.5%La3+掺杂的TiO2的光催化性能得到明显改善,反应90 min后甲醛的降解率仍达到93%. 在实验中发现催化剂有失活现象,但经简单清洗后其活性能够恢复.     

Ti基纳米TiO_2-CNT-Pt复合电极制备、表征及电化学性能

以电合成前驱体Ti(OEt)4直接水解法和电化学扫描电沉积法制备Ti基纳米TiO2-CNT-Pt(Ti/nanoTiO2-CNT-Pt)复合电极.透射电镜(TEM)和X射线衍射(XRD)测试表明,锐钛矿型纳米TiO2粒子(粒径5～10nm)和碳纳米管(CNT)结合形成网状结构,Pt纳米粒子(平均粒径9nm)均匀地分散在纳米TiO2-CNT复合膜表面.循环伏安及计时电流测试表明,Ti/nanoTiO2-CNT-Pt复合电极具有高活性表面,对甲醇的电化学氧化具有高催化活性和稳定性,Pt载量为0.32mg/cm2时,常温常压下甲醇氧化峰电流达到480mA/cm2.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Studies of Photoionization of CF3 I by Femtosecond Time-resolved Mass Spectrometry

The multi-photon dissociative photoionization dynamics of CF3I has been studied with femtosecond two-color pump-probe time of flight mass spectra at a pump pulse of 265 nm and a probe pulse of 398 nm. The life constants of CF3I+ and its fragment ions CF3+ and I+ are obtained as (96±7), (198±130) and (167±6)fs, respectively. The multi-photon dynamics leading to these ions differ. CF3I+ corresponds to a (1+2′) transition with one-photon pump excitation to the A band of CF3I. CF3+ are mainly formed by a tow-photon probe excitation to the CF3+ with subsequent dissociation of parent ions. I+ are produced in (2+2′) combined with (1+1′+2′) process. The results provide information on the multi-photon pathways involved.