Synthesis and solution properties of a new pH‐responsive polymer containing amino propanesulfonic acid residues

The reaction of diallyl amine with 1,3‐propane sultone led to the synthesis of the zwitterionic monomer 3‐(N,N‐diallylammonio)propanesulfonate. The sulfobetaine was cyclopolymerized in water in the presence of sodium chloride with t‐butylhydroperoxide as an initiator to afford a polysulfobetaine (PSB) in very good yield. PSB, upon treatment with sodium hydroxide, was converted into an anionic polyelectrolyte (APE). Although APE was readily soluble in salt‐free water, PSB needed the presence of low‐molecular‐weight salts (e.g., NaCl, KI, etc., in the range of 0.135–1.04 N) for its dissolution. The solution properties of PSB and APE were investigated with potentiometric and viscometric techniques. The basicity constant of the amine was apparent and followed the modified Henderson–Hasselbalch equation; as the degree of protonation (α) of the whole macromolecule increases, the protonation of the amine nitrogens becomes increasingly more difficult. The composition and phase diagram of the aqueous two‐phase systems of APE/PSB and poly(ethylene glycol) were also explored. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 172–184, 2003     

pH‐responsive polyphosphonates using butler's cyclopolymerization

The cationic monomer, N,N‐diallyl‐(diethylphosphonato)methylammonium chloride, and zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)methanephosphonate, were cyclopolymerized in aqueous solutions using ammonium persulfate or t‐butylhydroperoxide as initiators to afford a cationic polyelectrolyte (CPE) and a polyzwitterion ester (PZE), respectively. The CPE and PZE on acidic hydrolysis of the ester functionalities afforded the same polyzwitterionic acid (PZA): poly[3‐(N,N‐diallylammonio)methanephosphonic acid]. The solution properties of the CPE, pH‐responsive PZE, and PZA were studied in detail by potentiometric and viscometric techniques. Basicity constants of the phosphonate (P?O(OEt)O^?) and amine groups in the PZE and in the conjugate base of the PZE, respectively, were found to be “apparent” and as such follow the modified Henderson–Hasselbalch equation. In contrast to many polycarbobetaines and sulfobetaines, PZE was found to be soluble in salt‐free water as well as salt (including Ca²⁺, Li⁺)‐added solutions, and demonstrated “antipolyelectrolyte” solution behavior. The PZA, on the other hand, was found to be insoluble in salt‐free water, and on treatment with NaOH gave dianionic polyelectrolyte (DAPE) containing trivalent nitrogen and [P?O(O)₂^2?] groups. For the first time, several new phase diagrams of polyethylene glycol‐DAPE aqueous two‐phase systems (ATPSs) have been constructed in the presence of varying proportions of HCl. The ATPSs may find application in affinity partitioning of metal ions because DAPE is expected to be an effective chelator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Rheological behavior of associating ionic polymers based on diallylammonium salts containing single-, twin-, and triple-tailed hydrophobes

The cycloterpolymerizations of N,N-diallyl-(4-octyloxy)benzyl-, N,N-diallyl-(3,5-dioctyloxy)benzyl-, and N,N-diallyl-(3,4,5-trioctyloxy)benzyl-ammonium chloride (0-8 mol%) with hydrophilic monomer N,N-diallyl-N-carboethoxymethylammonium chloride and sulfur dioxide afforded a series of cationic polyelectrolytes (CPE). The CPEs were treated with HCl and NaOH to produce the corresponding pH-responsive cationic acid salts (CAS) and polybetaines (PB), anionic polyelectrolytes (APE) as well as polymers PB/APE containing various proportions of zwitterionic (PB) and anionic fractions (APE) in the polymer chain. Likewise, the cycloterpolymerizations of these single-, twin-, and triple-tailed hydrophobes (0-12 mol%) with hydrophilic monomer diallyldimethylammonium chloride and sulfur dioxide afforded a series of CPE in excellent yields. The polymers were characterized by different techniques including NMR and IR. The solution properties of the series of CPE were investigated by rheological techniques. The studied water soluble polymers showed different rheological behavior depending on their structure (hydrophobe type and content) as well as salinity and pH. The high shear thinning and the formation of networks at low shear would likely promote the use of such polymers in enhanced oil recovery applications.     

Synthesis and comparative solution properties of single‐, twin‐, and triple‐tailed associating ionic polymers based on diallylammonium salts

The cycloterpolymerizations of single‐, twin‐, and triple‐tailed hydrophobes with hydrophilic monomer N,N‐diallyl‐N‐carboethoxymethylammonium chloride and sulfur dioxide afforded a series of cationic polyelectrolytes (CPEs) in excellent yields. These CPEs, upon the acidic hydrolysis of the pendent ester groups, gave the corresponding pH‐responsive cationic acid salts, which, upon a treatment with sodium hydroxide, were converted to polybetaines (PBs), anionic polyelectrolytes (APEs), and PB/APE polymers containing various proportions of zwitterionic (PB) and anionic fractions (APE) in the polymer chain. At a shear rate of 0.36 s⁻¹ at 30 °C, salt‐free water solutions of the CPEs (2 g/dL) containing 8, 4, and 2.67 mol % of the single‐, twin‐, and triple‐tailed hydrophobes (all having 8 mol % octyloxy tails) had apparent viscosity values of 70, 2800, and 396,000 cps, respectively. The PB/APE polymer with a ratio of 33:67 for the zwitterionic and anionic fractions in the polymer chain gave the highest viscosity value. The superior viscosity behavior of the polymers containing the triple‐tailed hydrophobe was attributed to the blocky nature of the comonomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5480–5494, 2006     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

New,strong cationic hydrogels: Preparation of N,N,N′,N′‐tetraallyl piperazinium dibromide and its copolymers with N,N‐diallyl morpholinium bromide

N,N,N′,N′‐tetraallyl piperazinium dibromide (TAP) has been prepared in high yields by quaternization of N,N′‐diallyl piperazine with allyl bromide. Herein, we have described preparation of nonhydrolysable, strong, cationic hydrogels by copolymerization of TAP with N,N‐diallyl morpholinium bromide (DAM) in the presence of t‐butyl hydroperoxide as initiator in aqueous solutions. Because the monomer and crosslinker involved consist of quaternary amine functions, these hydrogels are fully cationic and do not carry hydrolysable groups. Contrary to expectations, the quaternary amine hydrogels presented do not show any super absorbency, instead dry gel particles in water undergo spontaneous disintegration with an audible bursting of the particles due to instantaneous, high osmotic pressure. Whereas, in KBr or HBr solutions, the swellings are relatively slow. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1006–1013, 2000     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ring‐opening polymerization of six‐membered cyclic carbonates initiated by ethanol amine derivatives and their application to protonated or quaternary ammonium salt‐functionalized polycarbonate films

Ring‐opening polymerization (ROP) of monofunctional neopentylglycol carbonate (NPGC) with or without bifunctional di(trimethylolpropane) carbonate (DTMPC), which are derived from available corresponding alcohols, affords linear polycarbonates or covalently‐linked polycarbonate networks, respectively. A series of available ethanol amine derivatives having the different numbers of 2‐hydroxylethyl arms (N,N,N’,N’‐tetrakis(2‐hydroxyethyl)ethylenediamine, triethanolamine, N‐methyldiethanolamine or N,N‐dimethylethanolamine) initiates the ROP of NPGC to afford star‐shaped, telechelic, or linear polycarbonates bearing tertiary amines with well‐controlled molecular weights and relatively narrow polydispersities Furthermore, the copolymerization of NPGC and DTMPC in the presence of these initiators readily gives tertiary amine‐modified polycarbonate films with well transparency and flexibility. These amino groups are easily converted to ammonium salts by protonation with acids, while the quaternization with benzyl bromide is strongly affected by the steric hindrance of these amines. N‐Methyldiethanolamine or N,N‐dimethylethanolamine residues in these films react easily with benzyl bromide to give quaternary ammonium salt‐functionalized films. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 487–497     

New piperazine‐based polymerizable monoquaternary cationic surfactants: Synthesis,polymerization, and swelling characteristics of gels

Monoquaternary cationic polymerizable surfactants of type N‐acryloyl‐N′‐methyl‐N′‐alkyl piperazinium bromide based on piperazine heterocycle was synthesized by reacting N‐acryloyl‐N′methyl piperazine with the corresponding n‐alkyl bromide (decyl, dodecyl, tetradecyl, and hexadecyl) in anhydrous acetone at room temperature. The resulting surfactants were deliquescent to display any sharp melting points. The surface activity was studied by surface tension measurements. Due to the complex head group geometry of these surfactants, the critical micelle concentration value was high in comparison to the analogous alkyltrimethyl ammonium bromides of similar alkyl chain length. The surfactants were polymerized by micellar (in water) and isotropic (in benzene) conditions and the resulting polymers were characterized by solubility and viscosity studies. The polymers prepared in water showed higher viscosity than the ones prepared in benzene as a result of micellar aggregation in water. The reduced viscosity of the polymers in polar solvents such as methanol and dimethyl formamide (DMF) showed polyelectrolyte‐like behavior, whereas nonelectrolyte behavior was observed in chloroform. pH‐responsive hydrogels were prepared by polymerizing the surfactants in the bicontinuous phase of a microemulsion. The resulting polymers did not exhibit any definite micro/nanostructure due to cross‐polymerization of the hydrophilic oil in the bicontinuous network structure. The gels were highly responsive to changes in pH of the medium and showed high‐swelling degree in acidic media owing to the protonation of the tertiary nitrogen of the piperazine ring. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2059–2072, 2009     

Synthesis and solution properties of poly(methacrylate)s with semipolar structures on the side chains

Poly{2‐(N,N‐dimethylamino)ethyl methacrylate [poly(DMMA)]}, which was prepared by radical polymerization initiated with dimethyl 2,2‐azobis(2‐methylpropionate), was reacted with hydrogen peroxide, diethyl sulfate, and chloroacetic acid to yield poly[N,N‐dimethyl‐N‐(2‐methacryloyloxyethyl)amine N‐oxide] [poly(DMANO)], poly[N‐ethyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxyethyl)ammonium ethyl sulfate] [poly(EDMES)], and poly[N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonioacetate] [poly(DMEAA)] as ion‐containing water‐soluble polymers, respectively. The solution properties of these charged polymers were compared via the reduced viscosities of these three charged polymers in aqueous solutions as a function of the concentration. Poly(EDMES) showed typical polyelectrolyte behavior, and the other two polymers [poly(DMANO) and poly(DMEAA)] exhibited antipolyelectrolyte behavior. Furthermore, the antipolyelectrolyte behavior was different for poly(DMANO) and poly(DMEAA); that is, poly(DMANO) was less dependent on small electrolytes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 129–141, 2005     

Swelling behavior of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide‐co‐acrylamide} hydrogels in aqueous solutions of surfactants

Temperature sensitive poly{N‐[3‐(dimethylaminopropyl)]methacrylamide‐co‐acrylamide} [P(DMAPMA‐co‐AAm)] hydrogels were prepared by the free‐radical crosslinking copolymerization of corresponding monomers in water with N,N‐methylenebisacrylamide as the crosslinker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylethylenediamine as the activator. The swelling equilibrium of the P(DMAPMA‐co‐AAm) hydrogels was investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate and the cationic surfactant dodecyltrimethylammonium bromide. In pure water, regardless of the amount of N,N‐methylenebisacrylamide, the P(DMAPMA‐co‐AAm) hydrogels showed a discontinuous phase transition between 30 and 36 °C. However, the transition temperature changed from discontinuous to continuous with the addition of surfactants; this was ascribed to the conversion of nonionic P(DMAPMA‐co‐AAm) hydrogels into polyelectrolyte hydrogels due to the binding of surfactants through hydrophobic interactions. Additionally, the concentrations of free sodium dodecyl sulfate and dodecyltrimethylammonium bromide ions were measured at different temperatures by conductometry, and it was found that the electric conductivity of the P(DMAPMA‐co‐AAm)–surfactant systems depended strongly on the swelling ratio; most notably, it changed drastically near the phase‐transition temperature of the P(DMAPMA‐co‐AAm) hydrogel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1645–1652, 2006     

Electrical conductivity of some cationic polysaccharides. I. Effects of polyelectrolyte concentration,charge density,substituent at the ionic group,and solvent polarity

Electrolytic conductivity behavior of some cationic polysaccharides in water, methanol, and the mixtures water/methanol is presented. The polyelectrolytes investigated contain quaternary ammonium salt groups, N‐alkyl‐N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride, attached to a dextran backbone. This study considers the influences of polymer concentration (1 × 10^?6 < C < 1 × 10^?2 monomol L^?1) and the charge density (ξ = 0.48–3.17) modified either by changing charge distance (b) or dielectric constant of the solvent (ε) on polyion–counterion interaction in salt‐free solutions. Above the critical value, ξ_c = 1, the variation of the equivalent conductivity (Λ) as a function of concentration is typical for a polyelectrolyte behavior. The conductometric data in water were analyzed in terms of the Manning's counterion condensation theory. The presence of longer alkyl chains at quaternary N atoms was found to have a negligible influence on the Λ values. The results show that the decrease of the medium polarity results in the decrease of the number of free ions and, consequently, of the equivalent conductivity values. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3584–3590, 2005     

Macroporous monolithic poly(4‐vinylbenzyl chloride) columns for organic synthesis facilitation by in situ polymerization of high internal phase emulsions

PolyHIPE materials are produced by polymerizing the continuous phase of emulsions where the internal phase volume fraction is higher than 74%. Columns of flow‐through supports for immobilized scavengers and reagents were prepared by polymerizing the continuous phase of high internal phase emulsions containing 4‐vinylbenzyl chloride and divinylbenzene. Emulsions were placed in containers and polymerized in situ. Highly porous (80% pore volume) monolithic columns with chloromethyl functionalities and crosslinked with divinylbenzene (6% or 40%) were obtained and functionalized by a flow‐through method, immobilizing tris(2‐aminoethyl)amine, diethanolamine, and 4‐bromophenylboronic acid. Columns with immobilized tris(2‐aminoethyl)amine were applied for the effective removal of acid chlorides from the solution pumped through the column. Flow properties (back pressure versus flow rate) were characterized for dichloromethane, N,N‐dimethylformamide and acetonitrile. High effectiveness of columns were demonstrated by an over 90% of acid chloride removal from the solution after a single pass‐flow of the solution through the column. The morphology of the column material was characterized by scanning electron microscopy and showed no damage of the material after the flow‐through utilization. Good permeative properties of the interconnected porous structure make polyHIPE columns good candidates for supports for reagents and catalysts. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6726–6734, 2009     

Prospects for using the copolymer of N,N-dimethyl-N,N-diallylammonium chloride with acrylamide in production of butadiene-styrene rubber

The flocculating performance of a cationic polyelectrolyte, copolymer of N,N-dimethyl-N,N-diallylammonium chloride with acrylamide, in the recovery of butadiene-styrene rubber from latex was studied in relation to the concentrations of the dispersed phase and acidifying agent and to the temperature.     

Polyampholyte terpolymers of amphoteric,amino acid‐based monomers with acrylamide and (3‐acrylamidopropyl)trimethyl ammonium chloride

Low‐charge‐density amphoteric copolymers and terpolymers composed of acrylamide, (3‐acrylamidopropyl)trimethyl ammonium chloride, and the amino acid derived monomers (e.g., N‐acryloyl valine, N‐acryloyl alanine, and N‐acryloyl aspartate) were prepared via free‐radical polymerization in aqueous media to yield terpolymers with random charge distributions and homogeneous compositions. Sodium formate (NaOOCH) was employed as a chain transfer agent during the polymerization to suppress gel effects and broadening of the molecular weight distribution. Terpolymer compositions were determined by ¹³C and ¹H NMR spectroscopy. Terpolymer molecular weights and polydispersity indices were obtained via size exclusion chromatography/multi‐angle laser light scattering, and hydrodynamic diameter values were obtained via dynamic light scattering. The solution properties of low‐charge‐density amphoteric copolymers and terpolymers have been studied as a function of solution pH, ionic strength, and polymer concentration. The low‐charge‐density terpolymers display excellent solubility in deionized (DI) water with no phase separation. The charge‐balanced terpolymers exhibit antipolyelectrolyte behavior at pH values ≥(6.5 ± 0.2). As solution pH is decreased, these charge‐balanced terpolymers become increasingly cationic because of the protonation of the anionic repeat units. Charge‐imbalanced terpolymers generally demonstrate polyelectrolyte behavior, although the effects of intramolecular electrostatic interactions (e.g., polyampholyte effects) on the hydrodynamic volume are evident at certain values of solution pH and salt concentration. The aqueous solution behavior (i.e., globule‐to‐coil transition at the isoelectric point in the presence of salt and globule elongation with increasing charge asymmetry) of the terpolymers in the dilute regime correlates well with that predicted by the polyampholyte solution theories of Dobrynin and Rubinstein as well as Kantor and Kardar. Examination of comonomer charge density, hydrogen‐bonding ability, and spacer group (e.g., the moiety separating the ionic group from the polymer chain) indicates that conformational restrictions of the amino acid comonomers result in increased chain stiffness and higher solution viscosities in DI water and brine solutions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4479–4493, 2006     

Aminothiazonaphthalic anhydride derivatives as photoinitiators for violet/blue LED‐Induced cationic and radical photopolymerizations and 3D‐Printing resins

The cations and radicals produced in aminothiazonaphthalic anhydride derivatives (ATNAs) combined with an iodonium salt, N‐vinylcarbazole, amine, or chloro triazine initiate the ring‐opening cationic polymerization of epoxides and the free radical polymerization of acrylates under LEDs at 405 or 455 nm. The photoinitiating ability of these novel photoinitiating systems is higher than that of the well‐known camphorquinone‐based systems. An example of the high reactivity of the new proposed photoinitiator is also provided in resins for 3D‐printing using a LED projector@405 nm. The chemical mechanisms are investigated by steady‐state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1189–1196     

Thermoresponsive Copolymers of Ethylene Oxide and N,N‐Diethyl Glycidyl Amine: Polyether Polyelectrolytes and PEGylated Gold Nanoparticle Formation

The synthesis of diblock as well as gradient copolymers of N,N‐diethyl glycidyl amine (DEGA) with ethylene oxide (EO) via anionic ring‐opening polymerization is presented. The polymers exhibit low polydispersities (≤1.13) and molecular weights in the range of 3300–10 200 g mol⁻¹. In PEG‐co‐PDEGA copolymers, incorporation of 4%–29% DEGA results in tailorable cloud point temperatures in aqueous solution and melting points depending on DEGA content. mPEG‐b‐PDEGA block copolymers can be quaternized to generate cationic double‐hydrophilic polyelectrolyte copolymers with polyether backbone. Furthermore, mPEG‐b‐PDEGA has been used as dual reducing and capping agent for gold nanoparticle synthesis.     

Formation of pore‐filled ion‐exchange membranes with in situ crosslinking: Poly(vinylbenzyl ammonium salt)‐filled membranes

Robust, polyelectrolyte‐filled, microporous membranes were prepared by the introduction and crosslinking of a preformed polymer within the pores of a poly(propylene) host membrane. Specifically, poly(vinylbenzyl chloride) (PVBCl) was reacted with piperazine or 1,4‐diaminobicyclo[2.2.2]octane in an N,N‐dimethylformamide (DMF) solution contained in the pores of the microporous base membrane. The remaining chloromethyl groups were reacted with an amine, such as trimethylamine, to form positively charged ammonium sites. This simple two‐step procedure gave dimensionally stable, anion‐exchange membranes in which the degree of crosslinking and the mass loading were determined by the concentration of PVBCl and crosslinker in the starting DMF solution. The incorporated polyelectrolyte gel was evenly distributed within the pores of the host membrane with no surface layers present. The membranes are fully characterized. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 807–820, 2001     

Influence of a cationic polyelectrolyte on the inverse micellar region of the ternary system sulfobetaine/water/alcohol

The influence of the cationic polyelectrolyte poly(diallyldimethylammonium chloride) on structure formation in the inverse micellar region (L2 phase) of the ternary system 3 (N,N-dimethyldodecylammonio)propanesulfonate/alcohol/water has been investigated. Up to a polymer concentration in the aqueous phase of 10 wt %, an isotropic phase still exists. As the chain length of the alcohol component increases, the isotropic phase region is reduced and shifted in direction to the water corner. The isotropic polyelectrolyte-modified L2 phase of the heptanol-based microemulsion has been studied in much more detail by means of conductometric, rheological, and differential scanning calorimetry measurements. The polyelectrolyte-modified microemulsion phase shows a characteristic low shear viscosity and Newtonian flow behavior. The characteristic features of the nonpercolated microemulsion droplets are the low conductivity and the disappearance of bulk water. One can conclude from the experimental data that the individual nonpercolated polyelectrolyte-stuffed microemulsion droplets are approximately uniform in size. In addition, the area of the polyelectrolyte-modified inverse microemulsion phase with heptanol and octanol depends on the temperature. This means that the area of the L2 region can be increased by the temperature being increased from room temperature to 40 °C. This behavior can be explained by a change in the bending elasticity of the surface film induced by Coulombic interactions between the functional groups of the polyelectrolyte and the surfactant head groups. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 742–751, 2004     

Enhanced photopolymerization of dimethacrylates with ketones,amines, and iodonium salts: The CQ system

The kinetics and mechanism of the photopolymerization of dimethacrylates using three‐component initiation systems consisting of camphorquinone (CQ), diphenyliodonium hexafluorophosphate (Ph₂IPF₆), and either N,N,3,5‐tetramethylaniline (TMA) or N,N‐dimethylbenzylamine or triethylamine were studied by photo‐DSC and UV‐visible spectroscopy. The effect of monomer structure on the curing kinetics and photobleaching were also investigated. Photo‐DSC studies showed fivefold increases in polymerization rate when all three components were present and the kinetics followed the trend: CQ/amine/Ph₂IPF₆ ? CQ/amine > CQ/Ph₂IPF_6.. For both CQ/amine/Ph₂IPF₆ and CQ/amine systems, the CQ was rapidly photobleached during the photo‐DSC timescale but for the systems without amine there was an induction stage before CQ photobleaching was evident. Studies of the effect of monomer type on the photobleaching rate show that the photobleaching behavior was independent of monomer structure. Three photoinitiation mechanisms have been proposed. The reaction mechanism of the CQ/amine/Ph₂IPF₆ system involves the reduction of the excited CQ molecule by the amine to form ketyl and aminoalkyl radicals, followed by the irreversible oxidation of the amine, and to a lesser extent, the ketyl radical by the iodonium salt, to form an initiating radical. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011