Construction of Modified Carbon Paste Electrode for Highly Sensitive Simultaneous Electrochemical Determination of Trace Amounts of Copper (II) and Cadmium (II)

A chemically modified electrode was constructed for rapid, simple, accurate, selective and highly sensitive simultaneous determination of Cu(II) and Cd(II) using square wave anodic stripping voltammetry. The electrode was prepared by incorporation of SiO₂ nanoparticles, coated with a newly synthesized Schiff base, in carbon paste electrode. The limit of detection was found to be 0.28 ng mL^?1 and 0.54 ng mL^?1 for Cu(II) and Cd(II), respectively. The proposed chemically modified electrode was used for the determination of copper and cadmium in several foodstuffs and water samples.     

Differential Pulse Anodic Stripping Voltammetric Simultaneous Determination of Copper(II) and Silver(I) with Bis(2‐hydroxyacetophenone) Butane‐2,3‐dihydrazone Modified Carbon Paste Electrodes

The behavior of a modified carbon paste electrode (CPE) for simultaneous determination of copper(II) and silver(I) by anodic adsorptive stripping voltammetry (ASV) was studied. The electrode was built incorporating the bis(2‐hydroxyacetophenone) butane‐2,3‐dihydrazone (BHAB) as a complexing agent to a Nujol‐graphite base paste. The resulting electrode demonstrated linear responses over the range of Cu(II) and Ag(I) concentrations 0.1–20 and 0.01–2.0 µM respectively. The relative standard deviation (RSD) for the determination of 5.0 µM of both metal ions were 2.9 and 3.1 % for Cu(II) and Ag(I), respectively. The method has been applied to the analysis of copper in wheat and barley seed samples and silver in developed radiological film.     

Differential pulse adsorption stripping voltammetric determination of copper(II) with 2-mercaptobenzimidazol at a hanging mercury-drop electrode.

Copper(II) was selectively accumulated on a hanging mercury-drop electrode by using 2-mercaptobenzimidazole. Ensuing measurements were carried out by differential pulse adsorption stripping voltammetry. Factors affecting the accumulation, reduction, and stripping steps were investigated and a procedure was developed. The optimum conditions for the analysis of copper were pH 5.0, 5.33 x 10(-5) M 2-mercaptobenzimidazole and an accumulation potential of -0.10 V (vs. Av/AgCl). A linear range was obtained in the concentration range 0.2-100 ng/ml with a 90 s accumulation time and a scan rate of 16 mV/s. For ten successive determinations of 1.0, 20.0 and 70.0 ng/ml copper(II), relative standard deviations of 4.2, 3.5 and 2.8%, respectively, were obtained. The developed method was applied to the determination of copper in commercial salts and aluminium alloys.     

Adsorptive voltammetric determination of copper with a benzoin oxime graphite paste electrode

A method for the determination of trace amounts of copper with a chemically modified carbon press-formed electrode is described. Copper could be accumulated at the electrode by complexing with benzoin oxime in ammonia buffer, then reduced at a constant potential of −0.4 V (vs. SCE) in nitric acid solution. Finally, a well-defined stripping peak could be obtained by scanning the potential in a positive direction. The response depends on the concentration of copper and accumulation time. For an accumulation time of 5 min the detection limit is about 1 ng/ml and the linear range is from 2 ng/ml to 4000 ng/ml, with a relative standard deviation of 5%. Many common metal ions have little or no effect on the determination of copper. The recommended procedure was applied to the determination of trace amounts of copper in natural water, and the results are in agreement with those of atomic-absorption spectrometry.     

Electrochemical Determination of Cu(II) Ions by 4‐Formylphenylboronic Acid Modified Gold Electrode

A self‐assembled monolayer (SAM) modified by 4‐formylphenylboronic acid was formed on the gold electrode, which was applied for the determination of trace concentrations of Cu(II). The formation of advanced SAM on the gold electrode was evidenced by electrochemical impedance spectroscopy, atomic force microscopy and contact angle measurements. Electrochemical determination of Cu(II) ions was performed by square wave voltammetry. Some mutual interferences caused by Cd(II), Co(II), Fe(II), Ni(II) and Pb(II) ions were investigated and it was demonstrated how the negative effects of these interfering ions could be eliminated by adjustment of proper parameters of square wave voltammetry.     

Determination of Copper by an Adsorption Differential Pulse Stripping Method with Naphthol Derivative

ABSTRACT

A simple, sensitive and selective method is proposed for the determination of copper(II) by adsorption-differential pulse stripping method. This method is based on the selective accumulation of the complexes of Cu(II) with l-(2-pyridylazo)-2-Naphthol and then reduction of the complex on a HMDE. The reduction current of the complex is about 0.0V vs. Ag/AgCl reference electrode at p8543146=4.0. The influences of various experimental parameters on the current peak were completely studied. The calibration graph was linear up to 50.0 ng/ml for a deposition time of 60 sec. The relative standard deviation was 2.3% (n=5) for Cu(II) concentration of 10.0 ng/ml, with a limit of detection of 0.2 ng/ml. The influence of potentially interfering ions was completely studied. The method has been applied for the determination of Cu(II) in water samples.     

Determination of palladium(II) with alpha-(2-benzimidazolyl)-alpha',alpha'-(N-5-nitro-2-pyridylhydrazone)-toluene by adsorptive cathodic stripping voltammetry

The determination of palladium(II) complexed with alpha-(2-benzimidazolyl)-alpha',alpha'-(N-5-nitro-2-pyridylhydrazone)-Toluene (BINPHT) was investigated by adsorptive cathodic stripping voltammetry using hanging mercury drop electrode. Palladium(II) in the sample solution can be determined in BINPHT and ethylenediaminetetraacetic acid (EDTA). Accumulation is achieved by adsorption of Pd(II)-BINPHT complex on a hanging mercury drop electrode. Optimal conditions were found to be: supporting electrolyte; 0.01 M sodium acetate buffer at pH 5.0, accumulation potential; -590 mV versus Ag/AgCl, accumulation time; 180 s, scan rate; 50 mV s(-1), concentration of BINPHT; 2x10(-5) M. The linear range of Pd(II) was observed over the concentration range 20-100 ng ml(-1) The detection limit (S/N=3) is 2 ng ml(-1). A good reproductivity shows RSD of 2.0% (n=7). This procedure offers high selectivity with the presence of EDTA masking some metallic ions. River water sample spiking with palladium was determined.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

A Selective Film Based on Poly(3‐octylthiophene) Doped with Dihydroxyanthraquinone Sulfonate

A stable film of poly(3‐octylthiophene)–dihydroxyanthraquinone sulfonate has been synthesized electrochemically in non‐aqueous solution. The incorporation of dihydroxyanthraquinone sulfonate as an anionic complexing ligand into poly(3‐octylthiophene) film during electropolymerization was achieved and copper ions were accumulated by reduction on the electrode surface. The presence of dihydroxyanthraquinone sulfonate during the electrochemical polymerization of 3‐octylthiophene is shown to impact the sensitivity and the stability of the organic conducting film electrode response. The electroanalysis of copper(II) ions using conducting polymer electrode was achieved by differential pulse anodic stripping voltammetry with remarkable selectivity. The analytical performance was evaluated and linear calibration graphs were obtained in the concentration range of 50–400 ng mL^?1 copper(II) ion for 240 seconds accumulation time and the limit of detection was found to be 7.8 ng mL^?1. To check the selectivity of the proposed stripping voltammetric method for copper(II) ion, various metal ions as potential interferents were tested. The developed method was applied to copper(II) determination in certified reference material, NWRI‐TMDA‐61, trace elements in fortified water.     

The use of 1-[pyridyl-(2)-azo]-naphthol-(2) in the presence of TX-100 and N,N'-diphenylbenzamidine for the spectrophotometric determination of copper in real samples

A simple and sensitive field detection and spectrophotometric method for determination of copper described herewith is based on the formation of a red coloured species of copper(II) with 1-[pyridyl-(2)-azo]-naphthol-(2) (PAN), TX-100 and N,N'-diphenylbenzamidine (DPBA) at pH range 7.8-9.4. The red coloured Cu(II)-PAN-(TX-100)-DPBA complex in chloroform shows maximum absorbance at 520 nm with molar absorptivity value of 1.14x10(5) l mol(-1) cm(-1). The detection limit of the method is 2 ng ml(-1) organic phase. The system obeys Beer's law up to 0.6 mug Cu(II) ml(-1) in organic solution. Most of the common metal ions generally found associated with copper do not interfere. The repeatability of the method was checked by finding relative standard deviation (RSD) (n=10) value for solutions each containing 0.2 mug ml(-1) of Cu(II) and the RSD value of the method was found to be 1.5%. The validity of the method has been satisfactorily examined for the determination of copper in soil and airborne dust particulate samples.     

Determination of copper(II) in the dairy product by an electrochemical sensor based on click chemistry

Herein, a novel sensitive electrochemical sensor for copper(II) based on Cu(I) catalyzed alkyne-azide cycloaddition reaction (CuAAC) is described. The catalyst of Cu(I) species is derived from electrochemical reduction of Cu(II) through bulk electrolysis (BE) with coulometry technique. The propargyl-functionalized ferrocene (propargyl-functionalized Fc) is covalently coupled onto the electrode surface via CuAAC reaction and forms propargyl-functionalized Fc modified gold electrode, which allows a good and stable electrochemical signal. The change of current at peak (dI), detected by differential pulse voltammetry (DPV), exhibits a linear response to the logarithm of Cu(II) concentration in the range of 1.0×10(-14)-1.0×10(-9) mol L(-1). It is also found that the proposed sensor has a good selectivity for copper(II) assay even in the presence of other common metal ions. Additionally, the proposed method has been applied to determine copper(II) in the dairy product (yoghurt) with satisfactory results.     

Trace amounts determination of lead,zinc and copper by adsorptive stripping voltammetry in the presence of dopamine

A selective and sensitive method for simultaneous determination of lead, zinc and copper by adsorptive differential pulse cathodic stripping voltammetry is presented. The method is based on adsorptive accumulation of the complexes of Pb(II), Zn(II), and Cu(II) ions with dopamine onto hanging mercury drop electrode (HMDE), followed by reduction of adsorbed species by differential pulse cathodic stripping voltammetry. The effect of experimental parameters such as pH, dopamine concentration, accumulation time and potential and scan rate were examined. Under the optimized conditions, linear calibration curves were established for the concentration of Pb, Zn, and Cu in the ranges of 5–150, 5–250, and 1–150 ng/mL, respectively. Detection limits of 0.06, 0.25, and 0.04 ng/mL for Pb, Zn, and Cu were obtained. An application of the proposed method is reported for the determination of these elements in some real samples such as natural waters and alloys.     

Solid phase extraction and determination of ultra trace amounts of copper(II) using octadecyl silica membrane disks modified by 11-hydroxynaphthacene-5,12-quinone and flame atomic absorption spectrometry

A simple and selective method for rapid extraction and determination of trace amounts of copper(II) ions using octadecyl-bonded silica membrane disks modified with 11-hydroxynaphthacene-5,12-quinone and flame atomic absorption spectrometry is presented. Extraction efficiency and the influence of pH, flow rates, amount of ligand and type and least amount of stripping acid were evaluated. Maximum capacity of the membrane disks modified by 5 mg of the ligand was found to be 360 mug of Cu(2+) ion. The break through volume is larger than 2000 ml. The limit of detection of the proposed method is 0.2 ng ml(-1). The effects of various cationic interferences on the percent recovery of copper in binary mixtures were studied. The method was applied to the recovery of Cu(2+) ions from four different water samples and a synthetic sample.     

A Low-cost Paper-based Diamond Electrode for Trace Copper Analysis at On-site Environmental Area

In the present study, an alternative platform for trace copper ions (Cu(II)) determination using a diamond electrode in combination with a disposable paper-based analytical device (d-PAD) has been proposed. First, the complexation between Cu(II) and 1,10-phenanthroline ligand was adsorptively accumulated onto a paper that is directly in contact with the diamond electrode and measured via square wave anodic stripping voltammetry. Under the optimal experimental conditions, the peak current was proportional to the concentration of Cu(II) in the range of 0.4–70 ng mL⁻¹, and the detection limit was found to be 0.1 ng mL⁻¹. Most importantly, this platform can be successfully applied to detect trace Cu(II) in different water samples (drinking water, tap water, groundwater and river water) with satisfactory results. Thus, the proposed d-PAD could be a highly efficient platform for trace Cu(II) determination in environmental samples.     

Adsorption voltammetry of the copper(II) 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex

The voltammetric determination of copper(II), based on adsorptive accumulation of the Cu(II)-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (S-Br-PADAP) complex on a hanging mercury drop electrode, is reported. The complex can be accumulated at the electrode at constant potential in 0.1M ammonium nitrate/ammonia buffer solution, and its reduction wave observed by scanning the potential in the negative direction, in the differential pulse mode. The calibration graph for copper is linear over the range 0.05-0.5muM, with accumulation for 5 min at -0.20 V. The adsorption of the complex is discussed and compared with that of copper complexes with several other pyridylazo derivatives.     

Differential Pulse Anodic Stripping Voltammetric Determination of Lead (II) Using Poly Xylenol Orange Modified Electrode

In this work a method for sensitive anodic stripping voltammetric determination of Pb(II) ions using a poly xylenol orange film modified electrode (PXOFME) has been proposed. Poly xylenol orange film (PXOF) was formed on a paraffin impegrenated graphite electrode (PIGE) using electro polymerization method by scanning the potential between −0.5 V to 1.3 V, at a scan rate of 50 mV/s for 30 segments in 0.1 M phosphate buffer solution (PBS) of pH 7. The PXOFME was characterized by scanning electron microscopy (SEM), ATR‐IR spectroscopy, cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). The modified electrode has been used to develop a sensitive method for the determination of Pb(II) ions by anodic stripping voltmmetry (ASV). The PXOFME was used to preconcentrate Pb(II) ions through complexation, the complexed metal ions were reduced electrochemically and then stripped anodically from the surface of the electrode. A linear range of 5 μg/L to 413 μg/L with a limit of detection (S/N=3) of 1.6 μg/L was observed for the determination of Pb(II) ions. The method was applied to lead determination in sea water and tap water samples and the results were found to be satisfactory.     

Determination of traces of copper by anodic stripping voltammetry at a rotating carbon paste disk electrode modified with poly(1,8-diaminonaphtalene)

In the present work, carbon paste electrodes (CPE) modified with conducting polymers 1,8-diaminonaphtalene (DAN) was developed for the voltammetric determination of Cu(II). The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu²⁺ compared with a bare carbon paste electrode. Copper(II) was preconcentrated at open circuit on the modified electrode. The measurements were carried out using a rotating disk electrode (RDE) as working electrode. The experimental parameters for the determination of Cu(II) were optimized. The Cu(II) ions were chemically deposited onto the surface of poly DAN-CPE in an acidic medium. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 0.1 to 250 ppb with a correlation coefficient of 0.9998. The relative standard deviation for 6 successive determinations was 4.7%. A study of interfering substances was also performed, and the method was applied to the direct determination of copper in real samples like tap water and orange juice samples. The article is published in the original.     

Preconcentration and Determination of Copper(II) at a Chemically Modified Electrode Containing Salicylaldehyde Thiosemicarbazone

A chemically modified electrode (CME) containing salicylaldehyde thiosemicarbazone (TSCsal) was evaluated for the ability to preconcentrate copper(II) prior to quantification by voltammetry. The CME has been used for the very sensitive and selective analysis of trace amounts of copper(II). A detection limit of 0.1 ppb was obtained by applying anodic stripping voltammetry with a flow system. The parameters that affect the sensitivity and possible interference by other ions or chelating agents have been examined in detail. The CME exhibits high stability and the response could be reproduced for four preconcentration-determination-renewal cycles [10ppbCu(II)] with a 2.87% relative standard deviation. The proposed method has been applied to the determination of copper(II) in tap water, drinking water, and NASS-3 standard reference sea water samples. The results gave satisfactory recoveries.     

Construction and Application of an Electrochemical Sensor for Simultaneous Determination of Cd(II), Cu(II) and Hg(II) in Water and Foodstuff Samples

By incorporation of synthesized magnetite nanoparticles (Fe₃O₄ NPs) coated with a new Schiff base into carbon paste electrode, a novel modified electrode was constructed for simultaneous determination of ultra trace amounts of Cd(II), Cu(II) and Hg(II). The complexation reaction of Schiff base with metal ions was studied spectrophotometrically. Under optimal conditions a detection limit of 0.20, 0.90 and 1.00 ng mL^?1 for Cd(II), Cu(II) and Hg(II), respectively, was obtained. We take the advantages of the proposed method for simple, rapid, sensitive and selective simultaneous determination of trace amounts of hazardous Cd(II), Cu(II) and Hg(II) in water and foodstuff samples.     

Electroanalysis of Pyridoxine at Copper Nanoparticles Modified Polycrystalline Gold Electrode

Pyridoxine is analyzed using square wave voltammetry (SWV) at copper nanoparticles (nano‐Cu) modified poly‐crystalline gold electrode (nano‐Cu/Au). Nano‐Cu/Au is fabricated by a potential scan electrodeosition technique. Nano‐Cu/Au electrode has been characterized morphologically and electrochemically. The analysis of pyridoxine at nano‐Cu/Au electrode is achieved utilizing the quenching of copper voltammetric response due to the complexation with pyridoxine forming an electroinactive complex. Pyridoxine selectively forms complex with copper ions (modifier), but not with Au (underlying substrate) as supported by UV/Vis spectrophotometry. Using SWV the calibration curve for pyridoxine analysis was obtained in the concentration range of 0.3–2.7 µM with high correlation coefficient. The proposed method has been successfully applied for the determination of pyridoxine in two dosage forms.