A High-Performance n-Type Thermoelectric Polymer from C−H/C−H Oxidative Direct Arylation Polycondensation

n-Type conjugated polymers (CPs) are crucial in the applications of organic electronics. Direct coupling of electron-deficient C−H monomer via selective C−H activation, namely C−H/C−H oxidative direct arylation polycondensation (Oxi-DArP), is an ideal approach toward such CPs. Herein, Oxi-DArP is firstly adopted to synthesize a high-performance n-type CP using a newly developed monomer, i.e., 3,6-di(thiazol-5-yl)-diketopyrrolopyrrole (Tz-5-DPP). Tz-5-DPP based homopolymer PTz - 5 - DPP with a molecular weight of 22 kDa has been synthesized via Oxi-DArP. After n-doping, PTz - 5 - DPP films exhibited electric conductivity values up to 8 S cm⁻¹ and power factors (PFs) up to 106 μW m⁻¹ K⁻². Notably, this PF value is the highest for n-type polymer thermoelectric materials to date. The Oxi-DArP synthesis and the excellent n-type performance of the polymer make this work an important step toward the straightforward and sustainable preparation of high-performance n-type polymer semiconductors.     

Rigid Coplanar Polymers for Stable n‐Type Polymer Thermoelectrics

Low n‐doping efficiency and inferior stability restrict the thermoelectric performance of n‐type conjugated polymers, making their performance lag far behind of their p‐type counterparts. Reported here are two rigid coplanar poly(p‐phenylene vinylene) (PPV) derivatives, LPPV‐1 and LPPV‐2 , which show nearly torsion‐free backbones. The fused electron‐deficient rigid structures endow the derivatives with less conformational disorder and low‐lying lowest unoccupied molecular orbital (LUMO) levels, down to ?4.49 eV. After doping, two polymers exhibited high n‐doping efficiency and significantly improved air stability. LPPV‐1 exhibited a high conductivity of up to 1.1 S cm^?1 and a power factor as high as 1.96 μW m^?1 K^?2. Importantly, the power factor of the doped LPPV‐1 thick film degraded only 2 % after 7 day exposure to air. This work demonstrates a new strategy for designing conjugated polymers, with planar backbones and low LUMO levels, towards high‐performance and potentially air‐stable n‐type polymer thermoelectrics.     

Conjugated polymers based on 1,8‐naphthalene monoimide with high electron mobility

1,4,8,9‐Naphthalene diimides (NDIs) with strong electron accepting ability and high stability are excellent building blocks for semiconductor polymers. However, 1,8‐naphthalene monoimide (NMI) with similar structure and energy levels as that of NDI has never been used to construct conjugated polymers because of synthetic difficulty. Herein, 3,6‐dibromo‐NMI (DBNMI) with bulky alkyl groups was obtained effectively in a four‐step synthesis, and three donor‐acceptor (D‐A) type conjugated polymers based on NMI were firstly prepared. These polymers have strong absorption in the range of 300–600 nm, low LUMO level of 3.68 eV, and moderate bandgaps of 2.18 eV. Space charge limiting current measurements indicate these polymers are typical electron transporting materials, and the highest electron mobility is up to 5.8 × 10⁻³ cm² V⁻¹ s⁻¹, which is close to the star acceptor based on NDI (N2200, 5.0 × 10⁻³ cm² V⁻¹ s⁻¹). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 276–281     

Dithienylmethanone‐Based Cross‐Conjugated Polymer Semiconductors: Synthesis,Characterization, and Application in Field‐Effect Transistors

Herein, we report the synthesis, characterization, and field‐effect properties of two cross‐conjugated dithienylmethanone (DMO)‐based alternating polymers, namely, PDMO‐S and PDMO‐Se . Both polymers possess high thermal stability, good solubility, and broad absorption spectra. Their electrochemical properties were investigated using cyclic voltammetry, indicating that PDMO‐Se has higher HOMO/LUMO energy levels of −5.49/−3.49 eV than −5.57/−3.58 eV of PDMO‐S . The two polymers exhibited promising charge transport properties with the highest hole mobility of 0.12 cm² V⁻¹ s⁻¹ for PDMO‐S and 0.025 cm² V⁻¹ s⁻¹ for PDMO‐Se . AFM and 2D‐GIXRD analyses demonstrated that the PDMO‐S formed lamellar, edge‐on packing thin film with close π‐π stacking. These findings suggest that cross‐conjugated polymers might be potential semiconducting materials for low‐cost and flexible organic electronics. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1012–1019     

An Amorphous n-Type Conjugated Polymer with an Ultra-Rigid Planar Backbone

High charge carrier mobility polymer semiconductors are always semi-crystalline. Amorphous conjugated polymers represent another kind of polymer semiconductors with different charge transporting mechanism. Here we report the first near-amorphous n-type conjugated polymer with decent electron mobility, which features a remarkably rigid, straight and planar polymer backbone. The molecular design strategy is to copolymerize two fused-ring building blocks which are both electron-accepting, centrosymmetrical and planar. The polymer is the alternating copolymer of double B←N bridged bipyridine (BNBP) unit and benzobisthiazole (BBTz) unit. It shows a decent electron mobility of 0.34 cm² V⁻¹ s⁻¹ in organic field-effect transistors. The excellent electron transporting property of the polymer is possibly due to the ultrahigh backbone stiffness, small π-π stacking distance, and high molecular weight.     

Linking polythiophene chains with vinylene‐bridges: A way to improve charge transport in polymer field‐effect transistors

A series of novel branched polythiophene derivatives bearing different densities of vinylene‐bridges as linking chains were synthesized by a general synthetic strategy. The organic field‐effect transistors, which were fabricated by spin‐coating the polymer solutions onto octadecyltrichlorosilane‐modified SiO₂/Si substrates with top‐contact configuration, afforded a high mobility of 8.0 × 10^?3 cm² V^?1 s^?1 with an on/off ratio greater than 10⁴ and a threshold voltage of about ?3 V in saturation regime. The devices based on these polymers possessed better performance than those of polymers without conjugated bridges and polymers with longer conjugated bridges. These results demonstrated that the combination of conjugated polythiophene backbones and vinylene‐bridges would improve the carrier mobility. As an emerging class of conjugated materials, polymers with vinylene‐bridges as linking chains would open up new opportunities in organic electronics, and their applications in organic electronics are promising. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1381–1392, 2009     

Blended Conjugated Host and Unconjugated Dopant Polymers Towards N-type All-Polymer Conductors and High-ZT Thermoelectrics

N-Type thermoelectrics typically consist of small molecule dopant+polymer host. Only a few polymer dopant+polymer host systems have been reported, and these have lower thermoelectric parameters. N-type polymers with high crystallinity and order are generally used for high-conductivity ( ) organic conductors. Few n-type polymers with only short-range lamellar stacking for high-conductivity materials have been reported. Here, we describe an n-type short-range lamellar-stacked all-polymer thermoelectric system with highest of 78 S⁻¹, power factor (PF) of 163 μW m⁻¹ K⁻², and maximum Figure of merit (ZT) of 0.53 at room temperature with a dopant/host ratio of 75 wt%. The minor effect of polymer dopant on the molecular arrangement of conjugated polymer PDPIN at high ratios, high doping capability, high Seebeck coefficient (S) absolute values relative to , and atypical decreased thermal conductivity ( ) with increased doping ratio contribute to the promising performance.     

Diketopyrrolopyrrole‐Porphyrin Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

Porphyrin‐based molecules have been widely used in dye‐sensitized solar cells and bulk heterojunction solar cells, but their application in field‐effect transistors (FETs) is limited. In this work, two conjugated polymers based on diketopyrrolopyrrole and porphyrin units were developed for FETs. The polymers exhibit extra‐low band gap with energy levels close to −4.0 eV and −5.0 eV due to the strong electron‐donating and withdrawing ability of porphyrin and diketopyrrolopyrrole. With additionally high crystalline properties, ambipolar charge carrier transports with a hole mobility of 0.1 cm² V⁻¹ s⁻¹ in FETs were realized in these polymers, representing the highest performance in solution‐processed FETs based on porphyrin unit.     

NaCdSb: An Orthorhombic Zintl Phase with Exceptional Intrinsic Thermoelectric Performance

Many Zintl phases are promising thermoelectric materials owning to their features like narrow band gaps, multiband behaviors, ideal charge transport tunnels, and loosely bound cations. Herein we show a new Zintl phase NaCdSb with exceptional intrinsic thermoelectric performance. Pristine NaCdSb exhibits semiconductor behaviors with an experimental hole concentration of 2.9×10¹⁸ cm⁻³ and a calculated band gap of 0.5 eV. As the temperature increases, the hole concentration rises gradually and approaches its optimal one, leading to a high power factor of 11.56 μW cm⁻¹ K⁻² at 673 K. The ultralow thermal conductivity is derived from the small phonon group velocity and short phonon lifetime, ascribed to the structural anharmonicity of Cd−Sb bonds. As a consequence, a maximum zT of 1.3 at 673 K has been achieved without any doping optimization or structural modification, demonstrating that NaCdSb is a remarkable thermoelectric compound with great potential for performance improvement.     

Semi‐perfluoroalkylated perylene diimides for conjugated polymers with high molecular weight and high electron mobility

Perylene diimides (PDIs) and their derivatives are excellent semiconductors, while conjugated polymers based on PDIs have limited applications because of their low electron mobility (μ_e) derived from low molecular weight. The reported maximum number‐average molecular weight (M_n) of related polymers is only 21 kDa because PDIs have very poor solubility due to strong π–π stacking of their big planar conjugated cores. Herein, it is found that suitable semi‐perfluoroalkyl groups could enhance the solubility of PDIs significantly, and a series of semi‐perfluoroalkyl modified conjugated polymers with high molecular weight and electron mobility were synthesized. The maximum M_n reaches 94.8 kDa [P(4C_F8C_H‐PDI‐T2)_HW]. In their space‐charge‐limited current (SCLC) devices, all polymers exhibit typical characters of electron transporting semiconductors, and the highest μ_e is up to 8.40 × 10⁻³ cm² V⁻¹ s⁻¹ [P(4C_F8C_H‐PDI‐T2)_HW], which is similar as that of widely used electron transporting semiconductor PC₆₁BM (6.41 × 10⁻³ cm² V⁻¹ s⁻¹). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 116–124     

Self-Doped n-Type Quinoidal Compounds with Good Air Stability and High Electrical Conductivity for Organic Electronics

Air stable n-type conductive molecules with high electrical conductivities and excellent device performance have important applications in organic electronics, but their synthesis remains challenging. Herein, we report three self-doped n-type conductive molecules, designated QnNs, with a closed-shell quinoidal backbone and alkyl amino chains of different lengths. The QnNs are self-doped by intermolecular electron transfer from the amino groups to the quinoidal backbone. This process is ascertained unambiguously by experiments and theoretical calculations. The use of a quinoidal structure effectively improves the self-doping level, and thus increases the electrical conductivity of self-doped n-type conductive molecules achieved by a closed-shell structure from<10⁻⁴ S cm⁻¹ to>0.03 S cm⁻¹. Furthermore, the closed-shell quinoidal structure results in good air stability of the QnNs, with half-lives>73 days; and Q4N shows an electrical conductivity of 0.019 S cm⁻¹ even after exposure to air for 120 days. When applying Q6N as the cathode interlayer in organic solar cells (OSCs), an outstanding power conversion efficiency of up to 18.2 % was obtained, which represents one the best results in binary OSCs.     

Semiconducting Polymers Based on Simple Electron-Deficient Cyanated trans-1,3-Butadienes for Organic Field-Effect Transistors

Developing high-performance but low-cost n-type polymers remains a significant challenge in the commercialization of organic field-effect transistors (OFETs). To achieve this objective, it is essential to design the key electron-deficient units with simple structures and facile preparation processes, which can facilitate the production of low-cost n-type polymers. Herein, by sequentially introducing fluorine and cyano functionalities onto trans-1,3-butadiene, we developed a series of structurally simple but highly electron-deficient building blocks, namely 1,4-dicyano-butadiene ( CNDE ), 3-fluoro-1,4-dicyano-butadiene ( CNFDE ), and 2,3-difluoro-1,4-dicyano-butadiene ( CNDFDE ), featuring a highly coplanar backbone and deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels (−3.03–4.33 eV), which render them highly attractive for developing n-type semiconducting polymers. Notably, all these electron-deficient units can be easily accessed by a two-step high-yield synthetic procedure from low-cost raw materials, thus rendering them highly promising candidates for commercial applications. Upon polymerization with diketopyrrolopyrrole ( DPP ), three copolymers were developed that demonstrated unipolar n-type transport characteristics in OFETs with the highest electron mobility of >1 cm² V⁻¹ s⁻¹. Hence, CNDE , CNFDE , and CNDFDE represent a class of novel, simple, and efficient electron-deficient units for constructing low-cost n-type polymers, thereby providing valuable insight for OFET applications.     

Distannylated Bithiophene Imide: Enabling High-Performance n-Type Polymer Semiconductors with an Acceptor–Acceptor Backbone

A distannylated electron-deficient bithiophene imide (BTI-Tin) monomer was synthesized and polymerized with imide-functionalized co-units to afford homopolymer PBTI and copolymer P(BTI-BTI2), both featuring an acceptor–acceptor backbone with high molecular weight. Both polymers exhibited excellent unipolar n-type character in transistors with electron mobility up to 2.60 cm² V⁻¹ s⁻¹. When applied as acceptor materials in all-polymer solar cells, PBTI and P(BTI-BTI2) achieved high power-conversion efficiency (PCE) of 6.67 % and 8.61 %, respectively. The PCE (6.67 %) of polymer PBTI, synthesized from the distannylated monomer, is much higher than that (0.14 %) of the same polymer PBTI*, synthesized from typical dibrominated monomer. The 8.61 % PCE of copolymer P(BTI-BTI2) is also higher than those (<1 %) of homopolymers synthesized from dibrominated monomers. The results demonstrate the success of BTI-Tin for accessing n-type polymers with greatly improved device performance.     

Linking Polythiophene Chains Through Conjugated Bridges: A Way to Improve Charge Transport in Polymer Solar Cells

Summary: A series of cross‐linked polythiophene derivatives ( P1 – 4 ) are synthesized by adding different ratio (0, 2, 5, and 10%) of conjugated cross‐linker via a Stille coupling reaction. From P1 – 4 , with the increase of the content of the conjugated bridges, the UV‐visible absorption peaks of the polymers were shifted towards blue and their electrochemical bandgap increased. The hole mobilities of P1 – 4 as determined from the SCLC model are 5.23 × 10⁻⁶, 1.28 × 10⁻⁴, 7.01 × 10⁻³, and 2.34 × 10⁻⁵ cm² · V⁻¹ · s⁻¹, respectively. The PCEs of the polymer solar cells based on P1 – 4 are 0.37, 1.05, 1.26, and 0.78%, respectively. The improvement of PCE of the devices based on P2 – 4 compared with that of P1 may be due to the increase of hole mobility.

Molecular structure of the polythiophene derivatives ( P1 – 4 ).     

Electron-Deficient Polycyclic Molecules via Ring Fusion for n-Type Organic Electrochemical Transistors

The primary challenge for n-type small-molecule organic electrochemical transistors (OECTs) is to improve their electron mobilities and thus the key figure of merit μC*. Nevertheless, few reports in OECTs have specially proposed to address this issue. Herein, we report a 10-ring-fused polycyclic π-system consisting of the core of naphthalene bis-isatin dimer and the terminal moieties of rhodanine, which features intramolecular noncovalent interactions, high π-delocalization and strong electron-deficient characteristics. We find that this extended π-conjugated system using the ring fusion strategy displays improved electron mobilities up to 0.043 cm² V⁻¹ s⁻¹ compared to our previously reported small molecule gNR, and thereby leads to a remarkable μC* of 10.3 F cm⁻¹ V⁻¹ s⁻¹ in n-type OECTs, which is the highest value reported to date for small-molecule OECTs. This work highlights the importance of π-conjugation extension in polycyclic-fused molecules for enhancing the performance of n-type small-molecule OECTs.     

Molecular Expansion for Constructing Porous Organic Polymers with High Surface Areas and Well-Defined Nanopores

Construction of porous organic polymers (POPs) with high surface areas, well-defined nanopores, and excellent stability remains extremely challenging because of the unmanageable reaction process. Until now, only a few reported POPs have Brunauer-Emmett-Teller (BET) surface areas (S_BET) exceeding 3000 m² g⁻¹. Herein, we demonstrate a molecular expansion strategy to integrate high surface areas, large nanopore sizes, and outstanding stability into POPs. A series of hyper-crosslinked conjugated polymers ( HCCPs ) with exceptional porosity are synthesized through this strategy. Specially, HCCP-6 and HCCP-11 exhibit the highest surface areas (S_BET >3000 m² g⁻¹) and excellent total pore volumes (up to 3.98 cm³ g⁻¹) among these HCCPs . They present decent total CH₄ storage capacities of 491 and 421 mg g⁻¹ at 80 bar and 298 K, respectively. Meanwhile, they are highly stable in harsh environments. The facile and general molecular expansion strategy would lead to improved synthetic routes of POPs for desired functions.     

Selenium‐Substituted Diketopyrrolopyrrole Polymer for High‐Performance p‐Type Organic Thermoelectric Materials

Development of high‐performance organic thermoelectric (TE) materials is of vital importance for flexible power generation and solid‐cooling applications. Demonstrated here is the significant enhancement in TE performance of selenium‐substituted diketopyrrolopyrrole (DPP) derivatives. Along with strong intermolecular interactions and high Hall mobilities of 1.0–2.3 cm² V^?1 s^?1 in doping‐states for polymers, PDPPSe‐12 exhibits a maximum power factor and ZT of up to 364 μW m^?1 K^?2 and 0.25, respectively. The performance is more than twice that of the sulfur‐based DPP derivative and represents the highest value for p‐type organic thermoelectric materials based on high‐mobility polymers. These results reveal that selenium substitution can serve as a powerful strategy towards rationally designed thermoelectric polymers with state‐of‐the‐art performances.     

Processible Cyclopentadithiophene Copolymers for Photovoltaic Applications

We designed and synthesized a series of conjugated polymers containing alternating 4H-cyclopenta[2,1-b:3,4-b′]dithiophene units and comonomers consisting of 2,2′-bithiophene, 3^″, 4^″ -dihexyl-α -pentathiophene, 3,4-ethylenedioxythiophene and 5,5′ -bis(2-thienyl)-4,4′ -dihexyl-2,2′ -bithiazole. These polymers possess optical bandgaps in the range of 1.75 to 2.0 eV. The desirable absorption attributes of these materials make then excellent candidates for use in photovoltaic cells. Electrochemical studies indicate desirable HOMO-LUMO levels for use with fullerene derivatives as electron transporters. Field effect transistors made of these materials show hole mobilities in the range of 7.5 × 10^?4 cm²/Vs to 2.0 × 10^?3 cm²/Vs. Due to the combination of these characteristics, power conversion efficiencies up to 3.1% were achieved on devices made of bulk heterojunction composites of these materials with soluble fullerene derivatives.     

Molecular Engineering of Chalcogen-Embedded Anthanthrenes via peri-Selective C−H Activation: Fine-Tuning of Crystal Packing for Organic Field-Effect Transistors

Disclosed herein is a RhCl₃-catalyzed peri-selective C−H/C−H oxidative homo-coupling of 1-substituted naphthalenes, which provides a highly efficient and streamlined approach to chalcogen-embedded anthanthrenes from readily available starting materials. Introducing O, S, and Se into the anthanthrene skeleton leads to gradually increased π–π stacking distances but significantly enhanced π–π overlaps with the growth of the hetero-atom radius. Moderate π–π distance, overlap area, and intermolecular S−S interactions endow S-embedded anthanthrene ( PTT ) with excellent 2D charge-transport properties. Moreover, the transformation of p-type to n-type S-embedded anthanthrenes is realized for the first time via the S-atom oxidation from PTT to PTT-O4 . In organic field-effect transistor devices, PTT derivatives exhibit hole transport with mobilities up to 1.1 cm² V⁻¹ s⁻¹, while PTT-O4 shows electron transport with a mobility of 0.022 cm² V⁻¹ s⁻¹.     

A Thiophene Backbone Enables Two-Dimensional Poly(arylene vinylene)s with High Charge Carrier Mobility

Linear conjugated polymers have attracted significant attention in organic electronics in recent decades. However, despite intrachain π-delocalization, interchain hopping is their transport bottleneck. In contrast, two-dimensional (2D) conjugated polymers, as represented by 2D π-conjugated covalent organic frameworks (2D c-COFs), can provide multiple conjugated strands to enhance the delocalization of charge carriers in space. Herein, we demonstrate the first example of thiophene-based 2D poly(arylene vinylene)s (PAVs, 2DPAV-BDT-BT and 2DPAV-BDT-BP , BDT=benzodithiophene, BT=bithiophene, BP=biphenyl) via Knoevenagel polycondensation. Compared with 2DPAV-BDT-BP , the fully thiophene-based 2DPAV - BDT - BT exhibits enhanced planarity and π-delocalization with a small band gap (1.62 eV) and large electronic band dispersion, as revealed by the optical absorption and density functional calculations. Remarkably, temperature-dependent terahertz spectroscopy discloses a unique band-like transport and outstanding room-temperature charge mobility for 2DPAV-BDT-BT (65 cm² V⁻¹ s⁻¹), which far exceeds that of the linear PAVs, 2DPAV-BDT-BP , and the reported 2D c-COFs in the powder form. This work highlights the great potential of thiophene-based 2D PAVs as candidates for high-performance opto-electronics.