Search for potential K ion battery cathodes by first principles

An important challenge facing K-ion batteries lies in exploring earth-abundant and safe cathode materials that can provide high capacity with high migration rate of K ions.Here,we propose a simple and efficient method for searching potential K cathode materials with first principles calculations.Our screening is based on combinations of weight capacity,K ion occupation ratio,volume change per K,and valence limit.With this screening method we predicted a series of potential K ions cathodes with favorable electrochemical performance,such as K₂VPO₄CO₃-like structures with 1 D diffusion channels,3 D channel structures K₂CoSiO₄,layered materials KCoO₂,KCrO₂,KVF₄ and K₅V₃F₁₄,and others.These potential cathodes have small volume changes,suitable voltage,and high capacity,with small diffusion barriers.They may be useful in K-ion batteries with high energy density and rate performance.     

Evolution of Artificial Base Pairs with Hydrogen Bond Complementarity

Artificial base pairs,from the perspective of synthetic biology,are designed to contain the features of modularity,orthogonality,and manipulability.And the development of artificial base pairs has beat endowed with responsibility to understand the biological process,improve the recognition capacity and stability of aptamers,and develop the nucleoside drugs,diagnosis,and drag delivery.In this review,we first gave a concise introduction of artificial base pairs based on their interaction modes including alternative hydrogen bonding,hydrophobic interaction,and metal coordination.Then we displayed the detailed information of artificial base pairs with hydrogen bonding interaction,and analyzed how the changes of their structures affect their functions.Subsequently,we highlighted the applications of functional artificial base pairs in aptamer discovery,diagnosis,and drug delivery.Finally,an insight into the remaining challenges and future perspective of the artificial bases was provided.     

Highly stable aqueous rechargeable Zn-ion battery: The synergistic effect between NaV_6O_(15) and V_2O_5 in skin-core heterostructured nanowires cathode

The aqueous rechargeable Zn-ion batteries based on the safe,low cost and environmental benignity aqueous electrolytes are one of the most compelling candidates for large scale energy storage applications.However,pursuing suitable insertion materials may be a great challenge due to the strong electrostatic interaction between Zn^{^(2+})and cathode materials.Hence,a novel NaV₆O₁₅/V₂O₅ skin-core heterostructure nanowire is reported via a one-step hydrothermal method and subsequent calcination for high-stable aqueous Zn-ion batteries(ZIBs).The NaV₆O₁₅/V₂O₅ cathode delivers high specific capacity of 390 m Ah/g at 0.3 A/g and outstanding cycling stability of 267 m Ah/g at 5 A/g with high capacity retention over 92.3%after 3000 cycles.The superior electrochemical performances are attributed to the synergistic effect of skin-core heterostructured NaV₆O₁₅/V₂O₅,in which the sheath of NaV₆O₁₅ possesses high stability and conductivity,and the V₂O₅ endows high specific capacity.Besides,the heterojunction structure not only accelerates intercalation kinetics of Zn²⁺transport but also further consolidates the stability of the layers of V₂O₅ during the cyclic process.This work provides a new perspective in developing feasible insertion materials for rechargeable aqueous ZIBs.     

Enhanced hydrogen evolution reaction in Sr doped BiFeO_3 by achieving the coexistence of ferroelectricity and ferromagnetism at room temperature

The perovskite transition metal oxide(TMO) has been considered in electrocatalysis for the modern clean energy technologies as its high electrochemical activity and low cost. The atomic scale engineering to the local stoichiometry of single crystal TMO provides a clue of the relation between electronic structure and catalytic performance. Here we report a hydrogen evolution reaction(HER) activity enhancement ~ 1761% of Bi_0.85Sr_0.15FeO_3 compared to the pure BiFeO_3. By the systemic investigation of the Sr doping level of Bi_1-xSr_xFeO_3(BSFO), it is found that the HER enhancement originates from the improvement of ferromagnetism of BSFO without obvious scarification of the ferroelectricity at the room temperature. The multiple ferroic orderings in BSFO are beneficial for HER activity, which offers the strengthen of hybridization of Fe 3d and O2 p orbitals from the view of ferromagnetism, and the assistance of electron drift by spontaneous electric polarization. Our study not only affords the strategy of developing multiple ferroic orderings in TMO, but also facilitates the atomic scale understanding of the improved HER activity.     

High-capacity Li-rich Mn-based Cathodes for Lithium-ion Batteries

Layered Li-rich Mn-based oxides are promising cathode materials for Li-ion batteries due to their high capacity and high operation voltage.However,their commercial applications are hindered by irreversible capacity loss in the first charge-discharge process,voltage decay during cycling,inefficient cyclability and rate capability.Many attempts have been performed to solve such issues,including the mechanism study and strategies to improve the electrochemical performance.This article provides a brief review and future perspective on the main challenges of the high-capacity Li-rich Mn-based cathodes for Li-ion batteries.     

电解质对两性药物分子盐酸氯丙嗪的胶团生长的影响

The effect of electrolytes on the micellar behavior of an amphiphilic drug,chlorpromazine(CPZ)hydroehloride,was studied using cloud point(CP)and dye solubilization techniques.In the presence of KBr,increase because of deprotonation of drug molecules at high pH. The visible absorbance increased(due to dye solubilization)with the increase in pH from 6.5 to 6.9,which indicated micellar growth.At fixed pH(6.7),addition of inorganic salts(KF,KC1,effecfiveness being in the order:F-Na >K ,which Was explained by considering cognizance of their hydrated radii.Compared with anions,their effect was small.Increase in[CPZ]caused micellar growth and hence the CP as well as the visible absorbance increased.The overall behavior Was discussed in terms of electrostatic interactions and micellar growth.     

对金属钠保存在煤油中机理的研究

长期以来人们一直认为金属钠保存在煤油中是因为金属钠的密度比煤油的密度大且金属钠和煤油不发生化学反应的缘故,因此在教学中形成一个教师都默认学生也认可的事实,这个事实就是金属钠能保存在煤油中有2点原因:     

有机铅卤化物钙钛矿:冉冉升起的高效太阳能电池(英文)

正1.Introduction We have recently witnessed a breakthrough in highly effi-cient solar cells, where the organolead halide perovskite, CH3NH3PbI3, was used as an absorber of sunlight. The perov-skite was used to sensitize mesoporous TiO2 films in a solid-state mesoscopic solar cell to deliver a power conversion     

江苏盱眙出土夹纻胎漆器的测试分析

采用激光拉曼光谱、X射线荧光光谱、红外吸收光谱等方法对盱眙出土的夹纻胎漆器进行了分析研究.研究发现漆膜中的红色颜料和暗黑色颜料分别是HgS和CuS;漆灰的填料以粘土类物质为主,存在着加入骨灰的工艺;生漆被使用在漆灰制作、色漆调制等方面,起到了成膜剂的作用;麻胎之间采用漆灰作为胶合剂.     

Large-area periodic lead halide perovskite nanostructures for lenticular printing laser displays

Lenticular printing technique provides a promising way to realize stereoscopic displays,especially,when microscopic optical structures are integrated into light-emitting materials/devices.Here,we fabricated large-area periodic structures with a spatial resolution at a wavelength scale from hybrid perovskite materials via a space-confined solution growth method.It takes advantages of both high refractive index contrast and high luminescence brightness,which allows the optical modulation on not only the reflection of illumination,but also the light emission from hybrid perovskites.The distributed feedback within these periodic structures significantly improves the degree of polarization and directionality of laser actions while their threshold is also reduced.These findings enable us to present a prototype of lenticular printing laser displays that vary emission colors at different view angles,which may find applications in creating high-resolution and high-contrast holographical images.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

Comparative study on the reactivity of propargyl and alkynyl sulfides in palladium-catalyzed domino reactions

Three types of sulfides bearing a propargyl or an alkynyl moiety have been studied in cyclocarbopalladation/cross-coupling domino palladium-catalyzed sequences. The reactivity of different types of sulfured starting materials has been compared as well as the difference in behavior of these compounds depending on the type of cross coupling ending the domino sequence. It appeared that these cascades were constantly more efficient on the propargyl benzyl thioether. In addition, it has been demonstrated that domino sequences ending with Stille, Suzuki–Miyaura, or Mizoroki–Heck lead efficiently and selectively to the desired cyclized products. Notably, when the introduction of an alkyne is targeted at the end of the cascade, it appeared that the Sonogashira coupling leads every time to the desired cyclic product in the mixture with the product resulting from the direct coupling between the aryl moiety of the substrate and the alkyne used as partner. Finishing the domino sequence with a Stille coupling instead of a Sonogashira one allowed improving significantly the ratio of the mixture in favor of the desired cyclized compound.     

Properties of aqueous solution of sodium glycocholate and a nonionic surfactant,and their mixtures

The micellar properties of aqueous binary mixed solutions of sodium glycocholate, NaGC, and octa-oxyethylene glycol mono-n-decyl ether, C₁₀E₈, have been studied on the basis of surface tensions, the mean aggregation number and the polarity of the interior of the micelles. The mean aggregation number, measured by steady state quenching method, decreased with the increase of the mole fraction of NaGC in the mixed system. The polarity of the interior, estimated by the ratio of first and third vibronic peak in a monomeric pyrene fluorescence emission spectrum, suggested that the hydrophobicity of intramicelles increased with the increase of the mole fraction of NaGC in the mixed system. These are considered to be caused by the differences in the chemical structure and the hydrophobic nature between NaGC and C₁₀E₈. The mean aggregation number and the polarity of the interior for each micelle near the CMC in lower total concentration of surfactants showed the tendency approaching those of pure micelle of the nonionic surfactant. This suggests that the ratio of NaGC in the initial micelles in the range of lower total concentration near the CMC is lower than that of the corresponding prepared mole fraction in the mixed system. This lower value was confirmed also from theoretical calculation of the ratio of NaGC at the CMC in the mixed micelle by regular solution treatment of Rubingh in the solution.     

由合成气制备C_2含氧化合物用铑基催化剂中各组分间的相互作用

采用ＴＰＲ，ＥＰＲ，ＩＲ，ＸＰＳ等手段对由合成气制备Ｃ２含氧化合物的Ｒｈ基催化剂中各活性组分间的相互作用进行了研究．ＴＰＲ实验表明，Ｍｎ的存在除了促进金属铑在担体表面的分散，增加还原过程的耗氢量外，还使Ｒｈ物种的还原温度显著升高；少量Ｌｉ的加入导致氢向载体ＳｉＯ２的溢流，使体系的还原特性发生了明显的变化．原位ＥＰＲ和ＸＰＳ研究显示，添加剂与Ｒｈ相互作用，在催化剂表面形成了稳定的复合氧化物．助剂Ｍｎ主要起着吸引电子的作用，使还原后的催化剂表面上Ｒｈ＋物种的含量增加；相反，作为给电子助剂，Ｌｉ的加入稳定了表面Ｒｈ０物种．吸附ＣＯ的ＩＲ实验得到了与ＥＰＲ和ＸＰＳ实验相一致的结论     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Electrocatalysis by adatoms at the gold and silver dissolution in cyanide solutions

The peculiarities of the effects of upd thallium, lead, bismuth, and mercury on the dissolution rates of gold and silver in cyanide electrolytes are compared. In general, they feature the abrupt acceleration of the dissolution of gold and, to a lesser extend, silver in the chemisorption range of mentioned ions. As the potential increases, the gold dissolution rates passes through a maximum the height of which is comparable with the limiting current of this process associated with limitations in the delivery of cyanide ions to the electrode surface. The current decay after the maximum is due to desorption of catalytically active adatoms. The chemisorption rate of thallium, lead, and bismuth ions at potentials more negative than the current peak is controlled by their diffusion to the gold surface, whereas the chemisorption rate of mercury is controlled by the adsorption kinetics. With the increase in the surface coverage with adatoms θ, the catalytic activity of all considered adatoms passes through a maximum. The sharp increase in the effective transfer coefficient in the presence of these adatoms makes the main contribution into the acceleration of the gold dissolution, while the increase in the exchange current has a smaller effect. The chemisorption of mentioned atoms on gold not only accelerates the dissolution but also changes its mechanism. For gold dissolution, the catalytic activity of upd thallium, lead, and bismuth increases in the following sequence: Tl ? Pb < Bi and the effect is additive in their simultaneous presence. For silver, the increase in the exchange current makes the main contribution into the acceleration of dissolution, whereas the transfer coefficient and the reaction order with respect to the ligand change insignificantly. Explanation of the observed peculiarities is given.     

The effect of coating on the stiffness and toughness of encapsulated fiber composites

The effect of the coating of the fiber on the stiffness and toughness of composite materials is presented in this paper. The type of composite material considered is of a macroscopically isotropic composite medium containing coated fibers. The models used to simulate such materials consists of: the cylindrical fiber, a cylindrical annulus of the coating, an annulus of the matrix enveloped by an infinite region of an equivalent composite consisting of a transversely isotropic material and representing the real composite with dispersed coated fibers. Solutions for the longitudinal, transverse and shear elastic moduli in the four-phase model were established assuming linear elastic conditions. The results were found to depend on the extent and the mechanical properties of the coating. The stiffness and toughness of the composite were evaluated in models representing plane-stress equatorial sections of the representative volume element of the real material according to the Hashin-Rosen model. The stiffness of the fiber composites was studied by varying the rigidity and the extent of the fiber-coating in the model and evaluating its influence on the overall mechanical behavior of the model. On the other hand, the toughness of the composite was evaluated by the method of caustics in models made of composite PMMA plates with PMMA inclusions coated with a ductile annulus. Interesting results were derived concerning the influence of the soft annulus on the mechanical behavior of the composite.     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

Chain dynamic parameters for some acrylic polymers

The dielectric relaxation data of Ishida et al. on a number of acrylic polymers are represented in terms of the relaxation function proposed by Havriliak and Negami using the multi-response techniques developed by Havriliak and Watts. Two of the parameters of this function are interpreted in terms of a temperature dependent distribution of relaxation times. In this method of interpretation the breadth of the distribution function is temperature-dependent while the skewness is not. The temperature dependence of the breadth of the distribution function is similar for most of these acrylic polymers.The parameters of the relaxation function are also interpreted in terms of Mansfield's model which represents intra- and inter-molecular interactions in terms of springs and dash pots. Briefly, increasing the side chain length for the methacrylate series increases the inter-molecular relaxation time which may be due to an increase in the entropy of activation for the orientation process. The difference between the one acrylate in this study and the four methacrylates of the series is a reduction in the intra-molecular relaxation time, apparently due to the lack of the alpha methyl group.     

ENTROPIC CONTRIBUTION TO THE INTERACTION PARAMETER xIN THE POLYMER／OLIGOMER SYSTEM： A LATTICE CLUSTER THEORY CONSIDERATION

Entropic contribution to the interaction parameter xeff in the model incompressible polymer/oligomer system is calculated by the lattice cluster theory (LCT). It is found that in the oligomer solvent, there exists a wide concentration range that the non-combinatorial “entropic interaction” term xeff φ1φ2 perceptibly counteracts the mean field combinary entropy ΔSMF. With the increase of the solvent size, both xeff and the ratio xefc φ1φ2/ΔSMF first reach their maximum and finally become trivially to zero. It is worth noting that no any demixing was found in the current calculation. This makes the controversial idea “entropically driven demixing” even elusive. However, we propose that further work on compressible polymer solution with structured monomer will witness the demixing owning to an increased configurational correlation.