Effect of surface chemical modification for aluminum hypophosphite with hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene on the fire retardancy,water resistance,and thermal properties for polyamide 6

The surface chemical modified aluminum hypophosphite (AHP) defined as MAHP was successful prepared through P–H bonds on AHP surface reacted with the aldehyde groups in hexa‐(4‐aldehyde‐phenoxy)‐cyclotriphosphazene made in our lab. The wettability of the flame retardants was evaluated by water contact angle tests, and the water contact angle of the prepared MAHP dramatically increased from 0° for AHP to 145°, which indicated the surface modification made the superhydrophilic AHP into superior hydrophobic MAHP. The prepared MAHP and AHP, respectively, incorporated into polyamide 6 (PA6) matrix to prepare flame retardant PA6 composites and the fire retardancy and thermal degradation behavior of flame retardant PA6 composites were investigated by limiting oxygen index, vertical burning test (UL‐94), cone calorimeter, and thermogravimetric analysis tests. The morphologies and chemical compositions of the char residues for PA6 composites were investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy, respectively. The water resistant properties of flame retardant PA6 composites were evaluated by putting the samples into distilled water at 70°C for 168 hr, and the mechanical properties for flame retardant PA6 composites were investigated by the tensile, flexural, and Izod impact strength tests. The results demonstrated that the PA6/MAHP composites successfully passed UL‐94 V‐0 flammability rating, and the limiting oxygen index value was 27.6% when the loading amount of MAHP was 21 wt%. However, there is no rating in vertical burning tests for PA6/AHP composite with the same amount of AHP, which indicated the surface modification of AHP enhanced the flame retardancy efficiency for PA6 composites. The morphological structures and analysis of X‐ray photoelectron spectroscopy of char residues revealed that the surface modification of AHP benefited to the formation of a sufficient, flame retardant elements rich, more compact and homogeneous char layer on the materials surface during combustion, which prevented the heat transmission and diffusion, limit the production of combustible gases, inhibit the emission of smoke and then led to the reduction of the heat release rate and smoke produce rate. The mechanical properties results revealed that the surface modification of AHP enhanced the mechanical properties, especially the Izod impact strength comparing with that of PA6/AHP composites with the same amount of flame retardant. After water resistance tests, the PA6/MAHP composites remained superior flame retardancy and presented continuous and compact char layer after cone calorimeter tests; however, the fire retardancy for PA6/AHP composite obviously decreased, and the char layer was discontinuous with big hole caused by the extraction of AHP by water during water resistance tests. Copyright © 2017 John Wiley & Sons, Ltd.     

Flame‐retardant behavior of bi‐group molecule derived from phosphaphenanthrene and triazine groups on polylactic acid

The flame‐retardant polylactic acid (PLA) has been prepared via mixing the flame retardant TGIC‐DOPO derived from phosphaphenanthrene and triazine groups into matrix. The flame retardancy of TGIC‐DOPO/PLA composites was characterized using the limiting oxygen index (LOI), vertical burning test (UL94), and cone calorimeter test. Results reveal that the 10%TGIC‐DOPO/PLA composite obtained 26.1% of LOI and passed UL94 V‐0 rating. The flame‐retardant mechanism of PLA composites was characterized via thermogravimetric analysis (TGA), pyrolysis gas chromatography/mass spectroscopy, and TGA‐Fourier transform infrared. It discloses that TGIC‐DOPO promoted PLA decomposing and dripping early, and it also released the fragments with quenching and dilution effects. These actions of TGIC‐DOPO contribute to reducing the burning intensity and extinguishing the fire on droplets, thus imposing better flame retardancy to PLA. When TGIC‐DOPO was partly replaced by melamine cyanuric with dilution effect and hexa‐phenoxy‐cyclotriphosphazene with quenching effect in composites respectively, the results confirm that TGIC‐DOPO utilize well‐combination in dilution effect and quenching effect to flame retard PLA. Copyright © 2015 John Wiley & Sons, Ltd.     

Modified montmorillonite combined with intumescent flame retardants on the flame retardancy and thermal stability properties of unsaturated polyester resins

Modified montmorillonite‐containing phytic acid (PA‐MMT) has been prepared by acid treatment and then introduced into unsaturated polyester resin (UPR) with an intumescent flame retardant (IFRs). The flame retardancy and thermal degradation of UPR/IFRs/PA‐MMT were evaluated by a limiting oxygen index (LOI) test, a vertical burning test (UL‐94), a thermogravimetric analysis (TGA), and a cone calorimeter test (CCT). Besides, the mechanical properties were studied by a universal testing machine. The LOI value of UPR/IFRs/PA‐MMT composites was increased to 29.2%. The CCT results indicated that the incorporation of PA‐MMT and IFRs significantly improved the combustion behavior of UPR. The results of the mechanical properties indicated that 1.5 wt% loading of PA‐MMT in UPR/IFRs showed the highest improvement in flexural strength and tensile strength. The flame‐retardant mechanism of PA‐MMT/IFRs was examined and discussed based on the results of combustion behavior and char analysis.     

Effect of natural basalt fiber for EVA composites with nickel alginate‐brucite based flame retardant on improving fire safety and mechanical properties

The natural basalt fiber (BF) was incorporated into EVA composites with environmental‐friendly nickel alginate‐brucite based flame retardant (NiFR), to further improve the flame‐retardant effect and mechanical properties. The flame retardancy of EVA composites were characterized by LOI, UL 94, and cone test. With 55 wt% loading, 3BF/52NiFR had the highest LOI value of 31.9 vol.% in all fiber reinforced composites and pass UL 94V‐0 ratting. And comparing to 55B composite with untreated brucite, 3BF/52NiFR decreased peak of heat release rate by 47.8%, total heat release by 21.9%, and total smoke production by 35.5% and kept more residue 54.0% during cone test. Moreover, 3BF/52NiFR also enhanced the mechanical properties of composites by better compatibility with EVA matrix. BF/NiFR exert synergistic flame‐retardant effect major in promoting charring effect in condensed phase during combustion. The fire‐resisted and rigid BF into the char layer reinforced the intensity of protective barrier which prolonged the residence time of pyrolysis carbonaceous groups degraded from EVA matrix, resulting in less heat and smoke release.     

Effect of anion of polyoxometalate based organic–inorganic hybrid material on intumescent flame retardant polypropylene

In this work, 12‐tungestocobaltic acid based organic–inorganic hybrid material, [Bmim]₆CoW₁₂O₄₀ (CoW) was synthesized and applied as a synergist in polypropylene (PP)/intumescent flame retardant (IFR) composites. The flame retardant properties were investigated by the limiting oxygen index (LOI), UL‐94 vertical burning test, thermal gravimetric analyzer (TGA), cone calorimeter and scanning electron microscopy (SEM) etc. The results showed that the PP composites with 16 wt% IFR and 1 wt% CoW achieves the UL‐94 V‐0 rating and gets a LOI value 28.0. However, only add no less than 25 wt% single IFR, can the PP composites obtain the UL‐94 V‐0 rating, which suggests that CoW has good synergistic effects on flame retardancy of PP/IFR composites. In addition, the SEM and cone calorimeter tests indicated the CoW improves the quality of char layer. The rate of char formation has been enhanced also because of the existence of CoW. It is the combination of a better char quality and a high rate of char formation promoted by CoW that results in the excellent flame retardancy of PP/IFR composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of a novel phosphorus‐containing organosilicon and its effect on the flame retardant and smoke suppression of polyethylene terephthalate

A novel phosphorus‐containing silicone flame retardant (PDPSI) was prepared by Mannish reaction, and a series of PDPSI/PET composites were prepared by melt blending method. The nuclear magnetic resonance (¹H NMR), Fourier transformation infrared (FTIR), and the thermogravimetric analyzer (TGA) results indicated that PDPSI showed network structure and owned good thermal stability, with the char residue of 62.2% at 800°C. The flame retardancy of PDPSI/PET composites was characterized by limiting oxygen index (LOI), vertical burning tests (UL‐94), and cone calorimeter (CCT). The results revealed that the addition amount of PDPSI was 5%, the LOI value of PDPSI/PET composites increased to 27.3%, and UL‐94 test passed V‐0 rating. When the PDPSI loading was 3%, PET composites showed excellent flame retardancy and smoke suppression, with a decrease in the peak heat release rate (PHRR) by 71.19% and the total smoke release (TSP) reduced from 14.4 to 11.1m². The scanning electron microscopy (SEM) and FTIR results of char residue demonstrated that the flame‐retardant mechanism of PDPSI was solid phase flame retardant. PDPSI catalyzed the aromatization reaction of PET to promote the formation of a dense and continuous carbon layer, finally improving the flame retardancy and smoke suppression properties of PET.     

Enhancement of a hyperbranched charring and foaming agent on flame retardancy of polyamide 6

A hyperbranched polyamine was prepared using an A₂ + B₃ approach. It acted as a hyperbranched charring and foaming agent (HCFA) in combination with ammonium polyphosphate (APP) to form a new intumescent flame retardant (IFR) system for polyamide 6 (PA6). Effect of HCFA on flame retardant and thermal degradation properties of IFR‐PA6 was investigated by limiting oxygen index (LOI), UL‐94 vertical burning, cone calorimeter, and thermogravimetric analysis (TGA) tests. The IFR system presented the most effective flame retardancy in PA6 when the weight ratio of APP to HCFA was 2:1. The LOI value of IFR‐PA6 could reach 36.5 with V‐0 rating when the IFR loading was 30 wt%. Even if the loading decreased to 25 wt%, IFR‐PA6 could still maintain V‐0 rating with an LOI value of 31. TGA curves indicated that APP would interact with both PA6 and HCFA in PA6/APP/HCFA composite under heating. The interaction between APP and HCFA improved the char formation ability of IFR system and then much more char was formed for PA6/APP/HCFA composite than for PA6/APP. Therefore, better flame retardancy was achieved. Moreover, the structure and morphology of char residue were studied by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicated that compact and foaming char layer containing P‐O‐C structure was formed for PA6/APP/HCFA system during combustion. Copyright © 2010 John Wiley & Sons, Ltd.     

Flame retardant properties and mechanism of an efficient intumescent flame retardant PLA composites

The charring agent (CNCA‐DA) containing triazine and benzene rings was combined with ammonium polyphosphate (APP) to form intumescent flame retardant (IFR), and it was occupied to modify polylactide (PLA). The flame retardant properties and mechanism of flame retardant PLA composites were investigated by the limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis, microscale combustion calorimetry, scanning electron microscopy, laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy. The analysis from LOI and UL‐94 presented that the IFR was very effective in flame retardancy of PLA. When the weight ratio of APP to CNCA‐DA was 3:1, and the IFR loading was 30%, the IFR showed the best effect, and the LOI value reached 45.6%. It was found that when 20 wt% IFR was loaded, the flame retardancy of PLA/IFR still passed UL‐94 V‐0 rating, and its LOI value reached 32.8%. The microscale combustion calorimetry results showed that PLA/IFR had lower heat release rate, total heat release, and heat release capacity than other composites, and there was an obvious synergistic effect between APP and CNCA‐DA for PLA. IFR containing APP/CNCA‐DA had good thermal stability and char‐forming ability with the char residue 29.3% at 800°C under N₂ atmosphere. Scanning electron microscopy observation further indicated that IFR could promote forming continuous and compact intumescent char layer. The laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy analysis results indicated that an appropriate graphitization degree of the residue char was formed, and more O and N were remained to form more cross‐linking structure. Copyright © 2016 John Wiley & Sons, Ltd.     

Synergistic effects of β‐cyclodextrin containing silicone oligomer on intumescent flame retardant polypropylene system

The effects of β‐cyclodextrin containing silicone oligomer(CDS), as a synergistic agent, on the flame retardancy and mechanical properties of intumescent flame retardant polypropylene composites were studied by adding different amounts of CDS in intumescent flame retardants. The limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were utilized to evaluate the synergistic effects of CDS in the composites. It was found that after a little amount of CDS partially replaced a charring‐foaming agent (CFA) in IFR, LOI values of the composites were enhanced and they obtained a UL‐94 V‐0 rating. IFR system containing 6.25wt% CDS presented the best flame retardancy in PP. The experimental results obtained from LOI and UL‐94, TGA, SEM, and mechanical properties indicated that the combination of CDS and CFA presents synergistic effects in flame retardancy, char formation, and mechanical properties of the composites. This is probably due to different structures of polyhydroxyl macromolecules (CDS and CFA), the existence of dimethyl silicone group in CDS, and the toughness of epoxy silicon chain in CDS. SEM results proved that the interfacial compatibility between IFR and PP was improved by CDS. Copyright © 2009 John Wiley & Sons, Ltd.     

Micro‐intumescent flame retardant polyamide 6 based on cyclic phosphate grafting phenol formaldehyde

In this paper, thermoplastic phenol formaldehyde (PF) grafted cyclic neopentyl phosphate (PFCP) was synthesized by using PF and 2,2‐dimethyl‐1,3‐propanediol phosphoryl chloride. It was characterized by Fourier transform infrared spectroscopy (FTIR), 1H and 31P nuclear magnetic resonance (NMR). Compared to PF, PFCP shows improved thermal and thermoxidative stability and allows itself to be used in polyamide 6 (PA6). A micro‐intumescent flame retardant system was constructed by using cyclic neopentyl phosphate as acid source, PF as charring agent and PA6 whose decomposition products work as blowing agent. The results showed that PA6/PFCP composite is classified the UL‐94 V‐0 rating and get a LOI value of 35.5% at 25% loading of PFCP. SEM results showed that the outside of char residues is continuous and dense, but the inside is micro‐intumescent and porous. XPS analysis of char revealed that most of phosphorus remained in the char layer. All the results suggest that the mode of flame retardant's action for PA6/PFCP composites is shifted from melting away to charring protection with the content of PFCP increasing. The coherent char generated by the decomposition of PFCP contributes most to flame retardancy of PA6. Copyright © 2016 John Wiley & Sons, Ltd.     

Phosphorylated cellulose/Fe3+ complex: A novel flame retardant for epoxy resins

A novel flame retardant containing cellulose, phosphorus and ferrum complex (Cell‐P‐Fe) was successfully synthesized and then it was used as flame retardants in epoxy resins (EP). Due to the present of acid sources and carbon sources, the Cell‐P‐Fe exhibits improved thermal stability and flame retardant properties. The EP/Cell‐P‐Fe composites with 10 wt% of Cell‐P‐Fe show remarkably improved LOI and UL‐94 values compared with the flame retardants without ferrum. At the loading of 10.0 wt% flame retardants, the char yield for EP/Cell‐P‐Fe composites increased to 29.1 wt%, indicating the improved thermal stability at high temperature. Moreover, thermogravimetric analysis, morphology of char residues and FTIR results demonstrate that stable char layers are formed on the surface of the composites during the combustion, attributing to the catalytic carbonization effect of Fe and phosphorus and the present of cellulose as carbon source. The stable char layers, which can protect the underlying materials from heat and oxygen, play an important role in the flame retardancy enhancement.     

Preparation of flame‐retardant polyamide 6 by incorporating MgO combined with g‐C3N4

Flame‐retardant polyamide 6 (PA6) was prepared by an inorganic‐organic composite (MCN or MgO/g‐C₃N₄) synthesized by incorporating magnesium oxide (MgO) combined with graphitic carbon nitride (g‐C₃N₄). As compared to g‐C₃N₄, MCN possessed a laminate structure, more holes, and a larger specific surface area. The addition of MCN could effectively improve the flame retardancy and mechanical properties of PA6 due to its better compatibility and dispersion in the PA6 matrix. When the addition of MCN was 20 wt%, the vertical combustion performance of the PA6/MCN sample reached flammability rating V‐0 (UL‐94) and the limiting oxygen index (LOI) was up to 32.1%. The results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) revealed that the introduction of MCN efficiently enhanced thermal stability of PA6. The morphologies of the char residue observed by scanning electron microscopy (SEM) verified that MCN promoted the formation of sufficient, compact, and homogeneous char layers on the composite's surface during burning. Thus led to increase the char layer strength and improve the flame retardancy of PA6. The thermogravimetric analysis/infrared (TG‐IR) revealed the gas‐phase retardancy mechanism of MCN. Compared with PA6/g‐C₃N₄, PA6/MCN showed better mechanical properties in terms of flexural strength and tensile strength.     

Roles of organic intercalation agent with flame retardant groups in montmorillonite (MMT) in properties of polypropylene composites

Three kinds of organic intercalation agent containing flame retardant groups, melamine (MA), triphenylphonium (TPP) chloride, and tetradecyl trihexyl phosphonium (TTP) bromide were intercalated into montmorillonite (MMT) via cation exchange reactions. These modified MMTs are combined with intumescent systems and compounded with PP. The flame retardant and thermal properties of the PP composites are studied. The organic intercalation agents in the layers of MMT play important roles in the char formation and flame retardant properties of PP composites. MA shows a better performance in limiting oxygen index (LOI) value and TPP helps to increase UL‐94 properties, whereas TTP maintains or deteriorates the flame retardancy of polypropylene/intumescent flame retardant (IFR) composites. The LOI and UL‐94 properties increase firstly and then decrease as the content of MMT increases. The MA acts as a blowing agent and emits an inert gas to provide migration impetus, which results in a better intumescent structured and stronger char to endure heat erosion. Although TPP and TTP emit combustible gas that burn, especially for TTP as it has a more flammable aliphatic chain. The synergistic effect between MA‐MMT and IFR is better than that for TPP‐MMT and TTP‐MMT. Copyright © 2014 John Wiley & Sons, Ltd.     

Poly (diallyldimethylammonium) and polyphosphate polyelectrolyte complexes as an all‐in‐one flame retardant for polypropylene

Poly (diallyldimethylammonium chloride) (PDDA) and ammonium polyphosphate (APP) deionized chloride ions and ammonium ions by ionizing in aqueous solution respectively, then combined to form poly (diallyldimethylammonium) and polyphosphate (PAPP) polyelectrolyte complexes as an all‐in‐one flame retardant for polypropylene and its composites were characterized by Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy. One flame retardant system composed of PAPP and PP, the other flame retardant system composed of PAPP, Polyamide‐6 (PA6) and PP were tested by limiting oxygen index (LOI), UL‐94, cone calorimeter tests and thermogravimetric analysis (TGA) and compared with pure PP. The results showed that the LOI value of PP/PAPP composite can reach 27.5%, and UL‐94 V‐2 rating can be reached at 25 wt% PAPP loading. Meanwhile the cone calorimetry results displayed that the peak heat release rate (PHRR) and total heat release (THR) were reduced up to 69.3% and 22.5%, respectively, compared with those of pure PP. After adding 5 wt% PA6, the carbon source missing due to the early PAPP decomposition can be made up, and PHRR and THR can be further reduced slightly. The flame retardant mechanism of PAPP was studied by FTIR spectroscopy and X‐ray photoelectron spectroscopy. Six‐membered ring of C─N containing conjugate double bonds, cross‐linked phosphate structure formed stable, intumescent, compact char layer which greatly improved the flame retardancy of PP.     

Synergistic effect of aluminum hypophosphite and intumescent flame retardants in polylactide

Aluminum hypophosphite (AHP) was introduced into polylactide/intumescent flame retardant (PLA/IFR) systems by melt blending. The flame retardant and thermal properties of the PLA composites were investigated. The results suggest that a synergistic effect exists between IFR and AHP on the char formation and anti‐dripping behavior of PLA composites. The PLA/IFR composites containing 10 wt% IFR can pass the UL‐94 V‐0 rating but the test is accompanied by heavy melt dripping. For the PLA/AHP a UL‐94 V‐2 rating is obtained for the same loading of IFR. However, the composites containing 7 wt% IFR and 3 wt% AHP pass the UL‐94 V‐0 rating with modified dripping behavior. Moreover, the char from combustion of PLA/IFR is flexible but of poor quality. That for PLA/AHP is brittle with many cracks. In contrast, that for PLA/IFR/AHP is strong and compact. Thus it can resist the erosion due to heat and gas formation and protect the inside of the matrix. In addition, AHP causes the crosslinking among APP, which promotes the char formation and prevents the melt dripping. This is the main reason for the good flame retardant properties of PLA composites. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation, properties and characterizations of halogen-free nitrogen-phosphorous flame-retarded glass fiber reinforced polyamide 6 composite

Halogen free nitrogen-phosphorous flame retardants (PMOP) were prepared through reaction of melamine and polyphosphoric acid in the presence of flame retardant modifier CM with silicotungistic acid as a catalyst in aqueous solution. FT-IR, XRD, DSC and TGA techniques were used to characterize the reaction product PMOP. The obtained flame retardants were then used to prepare flame retardant (FR) polyamide 6 (PA6) composite reinforced with glass fiber (GF) and the factors affecting the flame retardancy of the material were also investigated. The FR GF reinforced PA6 composite and the obtained charred layers were analyzed by utilizing TGA, SEM, FT-IR and XRD. The properties of the charred layer were connected with the flame retardancy of the corresponding material to reveal the flame retarding mechanism of FR GF reinforced PA6 composite. The experimental results show that PMOP flame retardant consists of melamine polyphosphate, melamine phosphate and possible melamine pyrophosphate. The presence of CM was found to improve the flame retardancy of FR GF reinforced PA6 composite. It was experimentally found that PMOP flame retardant, which is comparatively stable in the range of processing temperatures of PA6, is particularly suitable for flame retarding PA6 reinforced with GF. With increasing the flame retardant content, the flame retardancy of the FR reinforced material is not improved so obviously. However, the increase in the GF content greatly improves the flame retardancy of the composite, because GF greatly increases the char yield of material, decreases the maximal thermal decomposition rate, promotes the formation of charred layer with (PNO)_x structure and greatly increases the strength of the charred layer. The prepared FR GF reinforced PA6 composites have good comprehensive properties with flame retardancy 1.6 mm UL 94 V-0 level, tensile strength 76.8 MPa, Young's modulus 11.7 GPa, Izod notched impact strength 4.5 kJ/m², flexural strength 98.0 MPa and flexural modulus 7.2 GPa, showing a better application prospect.     

Synergistic flame‐retardant effect of DOPO‐based derivative and organo‐montmorillonite on glass‐fiber‐reinforced polyamide 6 T

Herein, a bridged 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) derivative (PN‐DOPO) in combination with organ‐montmorillonite (OMMT) was used to improve the flame retardancy and mechanical properties of glass‐fiber‐reinforced polyamide 6 T (GFPA6T). The flame retardancy and thermal stabilities of the cured GFPA6T composites were investigated using limiting oxygen index, vertical burning (UL‐94) test, cone calorimeter test, and thermogravimetric analysis (TGA). The morphological analysis and chemical composition of the char residues after cone calorimeter tests were characterized via scanning electron microscopy and energy dispersive spectrometry. The results indicate that 2 wt% OMMT combined with 13 wt% PN‐DOPO in GFPA6T achieved a V‐0 rating in UL‐94 test. The peak heat release rate and total smoke release remarkably decreased with the incorporation of OMMT as compared to those of GFPA6T/15 wt% PN‐DOPO. The TGA results show that the thermal stability and residual mass of the samples effectively increased with the increase in OMMT content. The morphological analysis and composition structure of the residues demonstrate that a small amount of OMMT could help form a more thermally stable and compact char layer during combustion. Also, with the incorporation of OMMT, the layers consisted of more carbon‐silicon and aluminum phosphate char in the condensed phase. Furthermore, GFPA6T/PN‐DOPO/OMMT composites exhibited excellent mechanical properties in terms of flexural modulus, flexural strength, and impact strength than the GFPA6T/PN‐DOPO system. The combination of PN‐DOPO and OMMT has improved the flame retardancy and smoke suppression of GFPA6T without compromising the mechanical properties.     

Fire retardant synergisms between nanometric Fe2O3 and aluminum phosphinate in poly(butylene terephthalate)

The pyrolysis and the flame retardancy of poly(butylene terephthalate) (PBT) containing aluminum diethylphosphinate (AlPi) and nanometric Fe₂O₃ were investigated using thermal analysis, evolved gas analysis (Thermogravimetry‐FTIR), flammability tests (LOI, UL 94), cone calorimeter measurements and chemical analysis of residue (FTIR). AlPi mainly acts as a flame inhibitor in the gas phase, through the release of diethylphosphinic acid. A small amount of Fe₂O₃ in PBT promotes the formation of a carbonaceous char in the condensed phase. The combination of 5 and 8 wt% AlPi, respectively, with 2 wt% metal oxides achieves V‐0 classification in the UL 94 test thanks to complementary action mechanisms. Using PBT/metal oxide nanocomposites shows a significant increase in the flame retardancy efficiency of AlPi in PBT and thus opens the route to surprisingly sufficient additive contents as low as 7 wt%. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of ammonium polyphosphate and fillers on flame retardant and mechanical properties of recycled PET injection molded

Ammonium polyphosphate (APP) and inorganic fillers were applied for improving flame retardancy and mechanical performance of recycled poly(ethylene terephthalate) (RPET). RPET was compounded with 5–10 wt% of talc and glass bead using twin screw extruder then were injection molded with 2 wt% of APP. The effects of fillers contents and APP on properties and flame retardancy of RPET composites were investigated. The incorporation of talc and glass bead as well as the adding of APP significantly improved tensile and flexural modulus of RPET composites. Scanning electron microscope micrographs indicated good distribution of talc, while glass bead was agglomerated on the RPET matrix. Flame‐retardant property of neat RPET and the RPET composites revealed V‐2 of UL‐94 flammability rating. It can be noted that the composites were less dripping because of the synergistic effect of adding talc and glass bead with APP. From thermogravimetric analysis results, larger of residual char contents and lower values of the activation energy were considered for enhancing flame retardancy in the RPET composites. Copyright © 2015 John Wiley & Sons, Ltd.     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of clay containing intumescent polypropylene nanoclay composites

The functions of nanoclay and three different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), and boron silicon containing preceramic oligomer (BSi), were studied to improve the flame retardancy of polypropylene (PP)‐nanoclay‐intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis (TGA), and cone calorimeter. According to the results obtained, the addition of 20 wt% intumescent flame retardant (IFR) improved the flame retardancy by increasing the char formation. Addition of clay slightly increases the LOI value and reduces the maximum heat release rate (HRR). Addition of clay also increases the barrier effect due to intumescent char, especially in thin samples. Boron compounds show their highest synergistic effect at about 3 wt% loading. According to UL‐94 test and LOI test, 3 wt% ZnB containing composite shows the highest rating (V0) and BPO₄ containing sample shows the highest LOI value (26.5). Copyright © 2010 John Wiley & Sons, Ltd.