A new way for calculating the adsorption capacity from surface excess isotherms

 Adsorption of n-butanol and water from butanol–water mixtures is studied on adsorbents of different hydrophobicity (activated carbon and hydrophobized montmorillonites). The shape of the adsorption isotherms of the hydrophobized clay minerals does not indicate preferential adsorption of butanol. Therefore, the adsorption capacity cannot be determined on the basis of the Langmuir isotherm. A new equation for determining the adsorption capacity is derived by combining the free enthalpy of adsorption with the adsorption excess amount. Both collections of data are obtained from the surface excess isotherm. The reliability of the adsorption capacity is checked by X-ray diffraction measurements. Received: 1 November 1997 Accepted: 19 February 1998     

Adsorption of triton X-100 on silica gel: effects of temperature and alcohols

Adsorption of Triton X-100 (TX-100) on silica gel has been studied as a function of temperature (308–328 K) and composition for mixtures of water with ethanol or t-butanol. The adsorption capacity of silica gel for TX-100 decreases with increase in alcohol content. Adsorption isotherms of TX-100 on silica gel are four-region and were analyzed using the ARIAN (adsorption isotherm regional analysis) model. Data in regions 2, 3 and 4 were fitted to the Temkin, bilayer and reverse desorption isotherms, respectively. The results show that adsorption of TX-100 on silica gel in water and alcohol-water binary mixtures occurs mainly through formation of monolayer surface aggregates or low bilayer coverage.      

Interlamellar adsorption of organic pollutants in hydrophobic montmorillonite

The adsorption of nitrobenzene, 2-chlorophenol, and 4-chlorophenol from water on organophilized derivatives of n-hexadecylpyridinium-montmorillonite (HDP-montmorillonite) was studied. Adsorption excess isotherms were obtained by the immersion method and were analyzed to determine the adsorption capacity of organic pollutants on the hydrophobized surface. The basal spacings of the clay minerals were determined by X-ray diffraction. The results of X-ray diffraction measurements are in good agreement with excess isotherms: whenever a region of the isotherm indicates an increase for the adsorption of organic component, an increase in basal spacing (interlamellar swelling) is also observed. By combining these two independent methods, composition and structure of the interlamellar space between the silicate layers could be accurately calculated. The free enthalpy of adsorption, the adsorption capacity, and the separation factor for adsorption are calculated by analyzing the adsorption isotherm on the basis of the Gibbs equation and Everett-Schay method. The results are utilizable for planning environmental procedures and systems (water clarification and soil remediation). Received: 17 July 2000   Accepted: 5 October 2000     

Influence of analysis conditions on low pressure adsorption measurements and its consequences in characterization of energetic and structural heterogeneity of microporous carbons

Nitrogen adsorption isotherms on nonporous and microporous carbons were thoroughly studied at low relative pressures. For nonporous carbons low pressure measurements seem to be unaffected by analysis conditions. However, these measurements on microporous solids may be affected by analysis conditions at relative pressures below 10^–4. It was shown that selection of proper equilibration time is crucial for correct measurements of equilibrium pressures during adsorption on microporous carbons. The isotherm shift induced by insufficient equilibration of the system may affect the surface heterogeneity and microporosity analysis. A comparison of the adsorption energy and pore volume distribution functions calculated from low pressure nitrogen adsorption isotherms measured at different equilibration times on a microporous carbon shows that this effect is smaller than it was expected.     

Separation mechanism of nortriptyline and amytriptyline in RPLC

The single and the competitive equilibrium isotherms of nortriptyline and amytriptyline were acquired by frontal analysis (FA) on the C18- bonded discovery column, using a 28/72 (v/v) mixture of acetonitrile and water buffered with phosphate (20 mM, pH 2.70). The adsorption energy distributions (AED) of each compound were calculated from the raw adsorption data. Both the fitting of the adsorption data using multi-linear regression analysis and the AEDs are consistent with a trimodal isotherm model. The single-component isotherm data fit well to the tri-Langmuir isotherm model. The extension to a competitive two-component tri-Langmuir isotherm model based on the best parameters of the single-component isotherms does not account well for the breakthrough curves nor for the overloaded band profiles measured for mixtures of nortriptyline and amytriptyline. However, it was possible to derive adjusted parameters of a competitive tri-Langmuir model based on the fitting of the adsorption data obtained for these mixtures. A very good agreement was then found between the calculated and the experimental overloaded band profiles of all the mixtures injected.     

Isotherms of adsorption of aromatic compounds on cellulose from heptane-isopropanol solutions

The isotherms of adsorption of benzene, anisole, benzyl alcohol, and benzaldehyde on the surface of microspherical mesoporous crosslinked cellulose were calculated from the chromatographic peaks of these compounds with consideration given to the longitudinal smearing of the analyte zone under the action of adsorption forces. The solvents were n-heptane-isopropanol mixtures containing various amounts of isopropanol (up to 2 vol %). The adsorption isotherms were described using equations of the displacement adsorption theory. The mechanism of the sorption of aromatic compounds and the physical meaning of the constants entering into the adsorption isotherm equation were discussed.     

Effect of the endcapping of reversed-phase high-performance liquid chromatography adsorbents on the adsorption isotherm

The retention mechanisms of n-propylbenzoate, 4-t ert-butylphenol, and caffeine on the endcapped Symmetry-C(18) and the non-endcapped Resolve-C(18) are compared. The adsorption isotherms were measured by frontal analysis (FA), using as the mobile phase mixtures of methanol or acetonitrile and water of various compositions. The isotherm data were modeled and the adsorption energy distributions calculated. The surface heterogeneity increases faster with decreasing methanol concentration on the non-endcapped than on the endcapped adsorbent. For instance, for methanol concentrations exceeding 30% (v/v), the adsorption of caffeine is accounted for by assuming three and two different types of adsorption sites on Resolve-C(18) and Symmetry-C(18), respectively. This is explained by the effect of the mobile phase composition on the structure of the C(18)-bonded layer. The bare surface of bonded silica appears more accessible to solute molecules at high water contents in the mobile phase. On the other hand, replacing methanol by a stronger organic modifier like acetonitrile dampens the differences between non-endcapped and endcapped stationary phase and decreases the degree of surface heterogeneity of the adsorbent. For instance, at acetonitrile concentrations exceeding 20%, the surface appears nearly homogeneous for the adsorption of caffeine.     

The Equilibria of Phosphatidylethanolamine-Cholesterol and Phosphatidylcholine–Phosphatidylethanolamine in Monolayers at the Air/Water Interface

Monolayers of phosphatidylethanolamine (PE), cholesterol (Ch), phosphatidylcholine (PC), and binary mixtures (PC-PE or PE-Ch) were investigated at the air/water interface. The surface tension values of pure and mixed monolayers were used to calculate π -A isotherms. The surface tension measurements were carried out at 20°C using an improved Teflon trough and a Nima 9000 tensiometer. The Teflon trough was filled with a subphase of triple-distilled water. Known amounts of lipid dissolved in 1-chloropropane were placed at the surface using a syringe. The interactions between phosphatidylethanolamine and cholesterol as well as phosphatidylcholine and phosphatidylethanolamine result in significant deviations from the additivity rule. An equilibrium theory to describe the behavior of monolayer components at the air/water interface was developed in order to obtain the stability constants of PC-PE and PE-Ch complexes. We considered the equilibrium between the individual components and the complex and established that phosphatidylethanolamine and cholesterol as well as phosphatidylcholine and phosphatidylethanolamine formed highly stable 1:1 complexes.     

Molecular simulation study on adsorption of methanol/water mixtures in mesoporous silicas modified pore surface silylation

Two types of molecular simulation techniques have been utilized to investigate adsorption of methanol/water mixtures in a mesoporous silica with a hydrophobic pore surface: the NVT-ensemble Molecular Dynamics method with the melt-quench algorithm for modeling a fully-silylated mesoporous silica and the μVT-ensemble Orientaional-Biased Monte Carlo method for calculating adsorption isotherms. Adsorption isotherms of methanol and water at 333 K are calculated for an equi-relative-pressure mixture (each component has the same relative pressure which is defined as the ratio of the partial pressure to the saturation pressure of the pure gas) together with pure gases. In the case of the pure gas, water hardly adsorb even at elevated pressures, while the adsorption isotherm for methanol shows the condensable adsorption. On the other hand, in the case of the mixture, water molecules are substantially adsorbed along with methanol molecules, showing an isotherm representing the condensation mechanism. In addition, it is found that the separation factor of methanol to water is the highest in the case of monolayer adsorption from a liquid mixture.     

The equilibria of phosphatidylcholine-fatty acid and phosphatidylcholine-amine in monolayers at the air/water interface

Monolayers of phosphatidylcholine, fatty acid and amine and binary mixtures phosphatidylcholine-fatty acid or phosphatidylcholine-amine were investigated at the air/water interface. Phosphatidylcholine (lecithin, PC), stearic acid (SA), palmitic acid (PA), decanoic acid (DA) and decylamine (DE) were used to the experiment. The surface tension values of pure and mixed monolayers were used to calculate π-A isotherms. The surface tension measurements were carried out at 22°C using an improved Teflon trough and a Nima 9000 tensiometer. The Teflon trough was filled with a subphase of triple-distilled water. Known amounts of lipid dissolved in 1-chloropropane were placed at the surface using a syringe. The interactions between lecithin and fatty acid as well as phosphatidylcholine and amine result in significant deviations from the additivity rule. An equilibrium theory to describe the behaviour of monolayer components at the air/water interface was developed in order to obtain the stability constants of PC-SA, PC-PA, PC-DA and PC-DE complexes. We considered the equilibrium between the individual components and the complex and established that lecithin and fatty acid as well as phosphatidylcholine and amine formed highly stable 1:1 complexes.     

吸附与润湿II.Triton X-100和Triton x-305在炭黑/水和炭黑/环己烷界面上的吸附层结构

测定了15℃和30℃时炭黑自水和环己烷中吸附非离子型表面活性剂TritonX-100和Triton X-305的等温线;计算了吸附过程的标准热力学函数;测定了石墨/水/环己烷和石墨/水/空气的接触角与表面活性剂浓度的关系, 分析所得结果,可得结论:在炭黑/水或石墨/水界面上,Triton型表面活性分子形成单分子吸附层,分子以憎水的iso-C8H17C6H4基团附着在表面,而以亲水的聚氧乙烯链伸入水相的方式取向;在炭黑/环已烷或石墨/环己烷界面上,分子是通过聚氧乙烯链吸附到表面上的,当浓度增加时分子在表面可能通过聚氧乙烯链间的相互作用而发生聚集,即可能形成表面反式胶团。     

The significance of a second adsorption phase with weakly adsorbed species for the calculation of the surface concentrations of a mixture: methanol–DME and methanol–ethene adsorption in SAPO-34

With the calorimetric (adsorption heat versus coverage) curve also measured together with the adsorption isotherm, the simultaneous use of both curves showed that there were two phases of adsorption in the adsorption of methanol, dimethyl ether, ethene and propane in SAPO-34. The dual-site Langmuir equation gave good fits to the adsorption data to support the interpretation that a second (type 2) adsorption phase occurred in the high-pressure region in addition to a first (type 1) adsorption phase on the acid sites at lower pressures. Adsorption experiments and calculations using binary gas mixtures showed that due to the existence of two types of adsorption, the multicomponent Langmuir isotherm equation (Langmuir competitive adsorption model) calculated incorrect surface concentrations when the concentrations were high. In contrast, the ideal adsorbed solution theory (IAST) calculated correct surface concentrations in the adsorption of mixtures.     

Adsorption isotherms for benzene on diatomites from China

In this paper, benzene adsorption isotherm and their hysteresis on two important local diatomites were determined at 25℃, and their silicon hydroxyl group (SiOH) number was determined, their properties were reported, and the relationship between surface structure, surface SiOH number per nm2 and adsorption isotherm with hysteresis was discussed. The specific surface was also calculated from the isotherms, and pore-size distribution was determined.     

氨基酸在固体表面的吸附*

介绍了氨基酸在固体表面吸附的常见吸附模式和吸附等温线类型。在常见的等温式中Sips等温式能处理液相中吸附质浓度从低到高、吸附剂表面从均匀到不均匀等各种情形下的固/液吸附体系,得到的等温线一般归属4类：S型、L型、H型和C型;总结和讨论了各吸附参数对氨基酸吸附的影响,具体考察了氨基酸种类、固体表面的性质、溶剂种类、介质的pH、介质离子强度和温度等因素对氨基酸吸附的影响,指出通过优化各吸附参数,可以调整氨基酸和固体吸附剂之间的静电吸引力或疏水作用,达到最好的吸附效果;对氨基酸的固体吸附剂进行了分类阐述。     

Counterion Nature and Alkylammonium Halide Adsorption Thermodynamics

Two surfactants were synthesized by reacting hydrogen halides (hydrogen chloride and hydrogen bromide) with 1-dodecylamine. The resultant cationic surfactants, 1-dodecylammonium chloride (DDAC) and 1-dodecylammonium bromide (DDAB), were characterized by NMR spectrometry and FTIR spectroscopy and data related to their adsorption at the fluid liquid/gas interface were obtained employing bubble surface tensiometry, in pure water and in HCl 0.1 M. Data did not fit well to Langmuir isotherm but Frumkin isotherm did adequately describe to process of adsorption. Adsorption isotherms, as well as data related to critical micelle concentration, CMC, indicated that in HCl 0.1 M, the presence of electrolytes and a common ion to DDAC decreased chloride solvation, changing surface packing and adsorption profile for this surfactant.     

溴化十二烷基吡啶的吸附和表面胶团化对二氧化硅悬浮液稳定性的影响

研究了阳离子表面活性剂溴化十二烷基吡啶（ＤＰＢ）的吸附和表面胶团化对二氧化硅（ＣＡＢ－Ｏ－ＳＩＬ）悬浮液稳定性的影响，以及加入电解质的效应．结果表明：ＤＰＢ在ＣＡＢ－Ｏ－ＳＩＬ上的吸附等温线呈双平台（或ＬＳ）型，溴化钠（０．１ｍｏｌ／Ｌ）的存在使吸附等温线向低浓区移动，第二平台的饱和吸附量增大，但基本不影响第一平台的吸附量，这些结果都与涉及形成表面胶团的二步吸附模型相符．当ＤＰＢ浓度很低时，ＣＡＢ－Ｏ－ＳＩＬ悬浮液的稳定性随ＤＰＢ浓度的增大而下降；当ＤＰＢ浓度增至ｓｍｃ（临界表面胶团浓度）附近时，悬浮液稳定性急剧提高．ＮａＢｒ的存在，并不影响上述悬浮液稳定性规律．利用表面活性剂的二步吸附和颗粒相互作用模型，并结合ＤＰＢ吸附等温线的研究结果，可以合理地解释ＣＡＢ－Ｏ－ＳＩＬ悬浮液稳定性的实验结果．     

Adsorption of Cu(II) from aqueous solution by anatase mesoporous TiO2 nanofibers prepared via electrospinning

Anatase mesoporous titanium nanofibers (m-TiO(2) NFs) have been synthesized from calcination of the as-spun TiO(2)/polyvinyl pyrrolidone (PVP)/pluronic123 (P123) composite nanofibers at 450 °C in air for 3h. The structures and the physicochemical properties of m-TiO(2) NFs are characterized by scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption isotherm analysis, and determination point of zero charge, respectively. An investigation of Cu(II) adsorption onto m-TiO(2) NFs has been studied in this research. The pH effect, adsorption kinetics, and adsorption isotherms are examined in batch experiments. Experimental data were analyzed using pseudo-first order and pseudo-second order kinetic models. It was found that adsorption kinetics were the best fitting by a pseudo-second order kinetic model. The optimum pH for Cu(II) adsorption was found to be 6.0. The equilibrium data were analyzed by the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models, which revealed that the Freundlich isotherm is the best-fit isotherm for the adsorption of Cu(II). Compared to the TiO(2) NFs (regular anatase titanium nanofibers) in the same experimental conditions to elucidate the role of the mesoporous structure of m-TiO(2) NFs, experimental results showed that the m-TiO(2) NFs had a better adsorption capacity for Cu(II) due to its higher surface area.     

Sulfate adsorption and surface precipitation on a volcanic ash soil (allophanic andisol)

Sulfate strongly adsorbs on metal oxides and soils with variable charges. However, its surface precipitation has not been clearly evaluated and its adsorption mechanism has been in dispute. In the present study, an allophanic andisol, a typical volcanic ash soil having both negative and positive variable charges, was used to identify the adsorption mechanism of sulfate. Sulfate adsorption isotherms were obtained by a batch method at pH values of 4, 5, 6, and 7 in a wide range of concentrations in an Na-H-SO(4)-OH system. Theoretical isotherms were applied to the measured values for the evaluation. The surface precipitation was detected by the measured adsorption isotherms, and the BET isotherm confirmed the presence of multilayer adsorption. Stronger and weaker adsorption sites were suggested by using the Langmuir isotherm for the monolayer adsorption. The adsorption energies obtained from the Langmuir equation and recent spectroscopic analysis suggested that the stronger adsorption corresponded to an inner-sphere surface complex and that the weaker adsorption corresponded to outer-sphere surface complexation. The BET and Langmuir equations showed three types of adsorption mechanisms for the sulfate adsorption on the soil.     

Adsorption mechanism of substituted pyridines on silica suspensions: an NMR study

Adsorption isotherms of 2,5-dimethylpyridine (2,5-DMP) on Aerosil 200 silica from water-2,5-DMP binary mixtures are known to exhibit special features indicative of surface phase transitions in the adsorbed layer. We have made similar observations on another substituted pyridine, 2,4,6-trimethylpyridine (2,4,6-TMP). By using 1D and 2D NMR spectroscopy, we investigated adsorbed layers on silica in suspension in water/substituted-pyridine mixtures and demonstrated the existence of adsorbed species specific signals. Comparison of signals with those displayed on NMR spectra of liquid binary mixtures under various pH conditions rules out adsorption via interaction of the surface silanol group and the lone electron pair of the nitrogen atom. A mechanism of adsorption through the interaction of surface siloxane oxygen and the aromatic pi-system is proposed; it is consistent with both thermodynamic measurements and stacking of substituted pyridines within the adsorbed layer.     

Determination of competitive adsorption isotherms applying the nonlinear frequency response method: Part II. Experimental demonstration

This paper demonstrates an experimental application of the nonlinear frequency response (FR) method extension to determine adsorption isotherms of binary mixtures. This method, based on the analysis of the response of a chromatographic column subjected to the sinusoidal inlet concentration changes, is shown to be an alternative for isotherm determination. The critical issue related to the successful application of the method is to reach experimentally the low frequency asymptotic behaviour of the corresponding frequency response functions (FRFs). Although, there are different possibilities to perform periodical inlet concentration changes, in this paper only simultaneous changes for both components were considered. The adsorption of phenol and 2-phenylethanol on octadecyl silica was analyzed experimentally using a mixture of methanol and water as a solvent. Parameters of competitive isotherms were also estimated for comparison using the classical perturbation method. Despite certain differences between competitive isotherms estimated with the two methods that were found, the obtained results show the potential of the nonlinear FR method for measuring competitive isotherms.