Syntheses and characterization of poly(iminophenol)s derived from 4-bromobenzaldehyde: Thermal, optical, electrochemical and fluorescent properties

Schiff base monomers[2-（4-bromobenzylideneamino）phenol and 2-（4-bromobenzylideneamino）-5-methylphenol] were synthesized by the condensation reaction of 4-bromobenzaldehyde with aromatic aminophenols.Then,the monomers were converted to their polyphenol derivatives by oxidative polycondensation reactions（OP） in an aqueous alkaline medium. The structures of the synthesized compounds were characterized by solubility tests,FT-IR,NMR,TG-DTA,DSC and SEC techniques.The HOMO-LUMO energy levels and electrochemical（E_g ） and optical（E_g） band gaps were calculated from cyclic voltammetry（CV） and UV-Vis measurements,respectively.Cyclic voltammetry（CV） was used to determine the electrochemical oxidation-reduction characteristics.Optical properties were investigated by UV-Vis and fluorescence analyses.Solid state electrical conductivities were measured on polymer films by four point probe technique using a Keifhley 2400 electrometer.The effects of electron-donating（-CH₃） group at p-position of -NH₂ group in aminophenol on electrochemical and thermal properties were also discussed.Photoluminescence（PL） properties of the synthesized materials were determined in solution forms using different solvents.Fluorescence measurements were carried out in various concentrated solutions to determine the optimum concentrations to obtain the maximal PL intensities.     

Monotropic smectic A to double layer smectic C transition of biphenyl containing liquid crystal acetylene

5-[（4’-Heptoxy-4-biphenylyl）carbonyloxy]-1-pentyne（A-3,7） was synthesized and the phase structures and transitions were investigated by differential scanning calorimetry（DSC）,wide angle X-ray diffraction（WAXD）,polarized light microscopy（PLM） and the molecular packing in the crystal and liquid crystalline phases were simulated by molecular dynamic simulation.The results showed that the sample formed thermodynamically metastable SmA and SmC₂ phases before crystallized during cooling and the crystal phase directly transformed into isotropic phase during heating.     

Organosoluble Aliphatic-Aromatic Poly（ether-amide）s Based on Pyridine Moiety in the Main Chain： Synthesis,Characterization and Thermal Studies

A series organosoluble and heterocyclic poly（ether-amide）s （PEA）s were synthesized from a new diamine containing pyridine moiety and four aliphatic-aromatic dicarboxylic acids by direct polycondensation reactions. Dicarboxilic acids 4a-4d containing ether groups were synthesized in two step reactions. At first, dialdehydes 3a-3d were synthesized from four dibromo alkanes la-ld and 4-hydroxybenzaldehyde 2, then dicarboxilic acids 4a-4d were synthesized from dialdehydes 3a-3d and malonic acid in a solvent free reaction. On the other hand, the new diamine 8 containing pyridine ring was synthesized in two step reactions. The structures of synthesized monomers and polymers were proven by FTIR, NMR spectroscopy and elemental analysis. Also all of the above polymers were fully characterized by inherent viscosity, solubility tests, gel permeation chromatography （GPC）, differential scanning calorimetry （DSC） and thermogravimetric analysis （TGA）. The resulted PEAs have shown good inherent viscosities, solubility and thermal properties.     

Synthesis of anionic sulphonate-crown ether surfactants

Two sulphonate-crown ether surfactants （sodium （4＇-dodecanoyldJbenzo-18-crown-6）-4＂（5＂）-sulpho- nate, ammonium （4＇-dodecanoyldibenzo-18-crown-6）-4＂（5＂）-sulphonate） were designed and synthesized via a two-step continuous method. The products were purified and characterized by IR. 1H NMR and elemental analysis. The physicochemical properties of the surfactants were studied by fluorescence, conductivity and dynamic light scattering techniques.     

Synthesis of Tin Oxide Through Thermal Decomposition of Sn2 （NH4）2 （ C2 O4 ）3 and Its Gas Sensing Property

Nanocrystalline tin oxide samples were prepared by using Sn2 （NH4 ）2 （C2O4）3 as the precursor. The thermal decompositions were respectively conducted at 250,450 and 650 ℃. TG-DTA, XRD, TEM, FTIR were used to characterize the samples. The indirect heating sensors by using these materials as sensitive bodies were fabricated on an alumina tube with Au electrodes and platinum wires. Sensing properties of these sensors were investigated. It was found that the tin oxide sample obtained by thermal decomposition at 450 ℃ has a higher sensitivity to C2H5OH and a higher selectivity to hexane and ammonia than those obtained via the conventional precipitate method and the working temperatures needed were greatly decreased.     

Optical and mechanical properties of polyurethane/surface-modified nanocrystalline cellulose composites

in order to improve the optical and mechanical performances of waterborne polyurethane （WPU）, nanocrystalline cellulose （NCC）/WPU composites were synthesized in this study. NCC （prepared by acid hydrolysis of cotton fiber） was modified by （3-aminopropyl）triethoxysilane （APTES） to enhance its compatibility with WPU, and the surface-modified NCC was characterized by grafting ratio, crystallinity and contact angle （CA）. NCC/WPU composites were examined by scanning electron microscopy （SEM）, X-ray powder diffraction （XRD） and thermogravimetric analysis （TG）. The anti-yellowing property, specular gloss, pencil hardness, and abrasion resistance of NCC/WPU composites were investigated by the methods of Chinese National Standards GB/T 23999-2009, GB/T 9754-2007, GB/T 6739-2006 and GB/T 1768-2006, respectively. The results showed that the grafting ratio of NCC modified by 6% APTES was 36.01% and the crystallinity of modified NCC was decreased with the enhancement of APTES. CA of the modified NCC was decreased by 28.8% and the nanoparticles were homogeneously dispersed in the WPU matrix. The XRD patterns of the NCC/WPU composites were relatively steady, while the thermal stability of the composites was enhanced by 6.7% with 1.0 wt% modified NCC. Modified NCC affected the specular gloss of NCC/WPU composites more obviously than the anti-yellowing property. The pencil hardness of NCC/WPU composites was increased from 2H to 4H by addition of NCC and the abrasion resistance of the composites was enhanced significantly. In general, NCC/WPU composites showed significant improvements in the optical and mechanical performances.     

Synthesis of a Novel Diamine 4-[（4＇-Butoxyphenoxy）carbonyl]- phenyl-3＂, 5＂-diaminobenzoate and Corresponding Polyimides

A novel diamine 4-[（4＇-butoxyphenoxy）carbonyl]phenyl-3＂,5＂-diaminobenzoate （BCDA） was synthesized from 4-butoxyphenol, 4-hydroxybenzoic acid and 3,5-dinitrobenzoic acid through four main intermediates, and a series of polyimides were also synthesized. All the intermediates and the final product were characterized by FTIR and 1H-NMR. The key step in synthesis route is selective hydrolyzation of two ester groups in 4-butoxyphenyl-4＇-acetoxybenzoate, by adjusting the reaction temperature and the concentration of ammonia, shorteding the reaction time. The properties of the novel polyimides, such as the aggregation structures, glass transition temperature, solubility and the pretilt angles, were carded out.     

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.     

Morphological characterization of amidinophenylporphyrins interacting with DNA by photo irradiation

5,10,15,20-Tetrakis（4-amidinophenyl）porphyrin（Por 1）,its Zn complex（Por 2）and amidinophenyl bispophyrin（Por 3）interacting with calf thymus DNA were investigated by scanning electron microscopy（SEM）and the shape and size of the porphyrin–DNA complexes were observed after photo irradiation.The results showed that the shape and size of DNA had signifcant differences with blank group by virtue of the interaction between the porphyrins and ct-DNA.This suggests the morphological characterization could be used to study the interaction and judge DNA photocleavage activity indirectly through the photo irradiation of porphyrins.     

Surface-relief-grating formation behavior of two hyperbranched azo polymers

In this work,surface-relief-grating formation behavior was studied by using two hyperbranched azo polymers.The hyperbranched polymers containing pseudo-stilbene type azo chromophores throughout the hyperbranched structure were synthesized by step-growth polycondensation of AB₂ type monomers.The AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）-phenylazo） benzoic acid（BAA）,was prepared through azo-coupling reaction between N,N’-bis（2-chloroethyl）aniline and 4- aminobenzenic acid.The another AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）phenylazo）-3-nitro-benzoic acid（BANA）, was prepared through azo-coupling reaction between N,N-bis（2-chloroethyl）aniline and 3-nitro-4-aminobenzcnic acid.The hyperbranched polymers（PBAA and PBANA） were prepared through nucleophilic substitution reaction of BAA and BANA, respectively.The polymers synthesized were characterized by using spectroscopic methods and thermal analysis.The photoinduced dichroism and photo-induced surface-relief-grating（SRG） formation of the hyperbranched polymers were investigated upon irradiation with Ar⁺ laser at 488 nm.PBAA shows typical photoinduced dichroism SRG formation behavior.On the contrary,PBANA does not show the photoresponsive properties.The results indicate that the nitro at the ortho position of azo group of PBANA shows the effect of inhibiting the photoinduced variations.The effect can be attributed to the blockage of the trans-cis isomerization of the azobenzene moieties by the steric hindrance.     

Syntheses of 12‐arm star polymers and star diblock copolymers by nitroxide‐mediated radical polymerization using dendritic dodecafunctional macroinitiators

Dendritic multifunctional macroinitiators having 12 TEMPO‐based alkoxyamines were prepared by the reaction of a benzyl alcohol having 4 TEMPO‐based alkoxyamines with 1,3,5‐tris[(4‐chlorocarbonyl)phenyl]benzene and 1,3,5‐tris(4‐isocyanatophenyl)benzene. Using the dodecafunctional macroinitiators, TEMPO‐mediated radical polymerizations of styrene (St) were carried out at 120 °C, and 12‐arm star polymers ( star‐12 ) with narrow polydispersities of M_w/M_n = 1.06–1.26 were obtained. To evaluate the livingness for the TEMPO‐mediated radical polymerizations of St, hydrolysis of the ester bonds of the 12‐arm star polymers and subsequent SEC measurements were carried out. Furthermore, using star‐12 as the macroinitiator, TEMPO‐mediated radical polymerization of 4‐vinylpyridine (4‐VP) was carried out, and well‐defined poly(St)‐b‐poly(4‐VP) 12‐arm star diblock copolymers with M_w/M_n = 1.18–1.19 were obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3689–3700, 2005     

Electrochemical Intramolecular Aminooxygenation of Unactivated Alkenes

An electrochemical approach to the intramolecular aminooxygenation of unactivated alkenes has been developed. This process is based on the addition of nitrogen‐centered radicals, generated through electrochemical oxidation, to alkenes followed by trapping of the cyclized radical intermediate with 2,2,6,6‐tetramethylpiperidine‐N‐oxyl radical (TEMPO). Difunctionalization of a variety of alkenes with easily available carbamates/amides and TEMPO affords aminooxygenation products in high yields and with excellent trans selectivity for cyclic systems (d.r. up to>20:1). The approach provides a much‐needed complementary route to existing cis‐selective methods.     

Simultaneous evaluation of one‐electron reducing systems and radical reactions in cells by nitroxyl biradical as probe

In the present study, a novel probe for the simultaneous evaluation of one‐electron reducing systems (electron transport chain) and one‐electron oxidizing systems (free radical reactions) in cells by electron chemical detection was developed. Six‐membered cyclic nitroxyl radicals (2,2,6,6‐tetramethylpiperidine‐1‐oxyl; TEMPO series) are sensitive to one‐electron redox systems, generating the hydroxylamine form [TEMPO(H)] via one‐electron reduction, and the secondary amine form [TEMPO(N)] via one‐electron oxidation in the presence of thiols. In contrast, the sensitivities of five‐membered cyclic nitroxyl radicals (2,2,5,5‐tetramethylpyrrolidine‐1‐oxyl; PROXYL series) to the one‐electron redox systems are comparatively low. The electron chemical detector can detect 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), TEMPO(H) and PROXYL but not TEMPO(N). Therefore, nitroxyl biradical, TEMPO‐PROXYL, as a probe for the evaluation of one‐electron redox systems was employed. TEMPO‐PROXYL was synthesized by the conjunction of 4‐amino‐TEMPO with 3‐carboxyl‐PROXYL via the conventional dicyclohexyl carbodiimide reaction. TEMPO‐PROXYL, TEMPO(H)‐PROXYL and TEMPO(N)‐PROXYL were simultaneously quantified by HPLC with Coularray detection. Calibration curves for the quantification of TEMPO‐PROXYL, TEMPO(H)‐PROXYL and TEMPO(N)‐PROXYL were linear in the range from 80 nm to 80 μm , and the lowest quantification limit of each molecule was estimated to be <80 nm . The relative standard deviations at 0.8 and 80 μm were within 10% (n = 5). Copyright © 2015 John Wiley & Sons, Ltd.     

Metal‐Free 2,2,6,6‐Tetramethylpiperidin‐1‐yloxy Radical (TEMPO) Catalyzed Aerobic Oxidation of Hydroxylamines and Alkoxyamines to Oximes and Oxime Ethers

TEMPO‐Mediated oxidation of hydroxylamines (=hydroxyamines) and alkoxyamines to the corresponding oxime derivatives is reported (TEMPO=2,2,6,6‐tetramethylpiperidin‐1‐yloxy radical; Scheme 2). These environmentally benign oxidations proceed in good to excellent yields (Table 1). For alkoxyamines, oxidation to the corresponding oxime ethers can be performed by using dioxygen as a terminal oxidant in the presence of 5–10 mol‐% of TEMPO or 4‐substituted derivatives thereof as a catalyst (Scheme 3 and Table 2). Importantly, benzyl bromides can directly be transformed to oxime ethers via in situ alkoxyamine formation by a nucleophilic substitution followed by TEMPO‐mediated oxidation (Scheme 4 and Table 3).     

Copper(I) and Silver(I) Coordination Polymers Based on Rigid Bis(triazole) Ligand: Syntheses,Structures, and Catalytic Properties

Two metal coordination polymers, [Cu₂(btb)(CN)₂]_n ( 1 ) and [Ag₂(btb)(muco)]_n ( 2 ) [btb = 4, 4′‐bis(1, 2,4‐triazolyl‐1‐yl)‐biphenyl, H₂muco = trans,trans‐muconic acid], were synthesized under solvothermal conditions and characterized by elemental analysis, IR spectroscopy, and X‐ray single‐crystal diffraction. Complex 1 exhibits a 1D ladder‐chain structure containing cyanide anions, which are generated in situ by the cleavage of C–C bond of acetonitrile molecules under solvothermal conditions, whereas 2 possesses a rare 3D framework with binodal 4, 6‐connected fsh topology. In addition, the thermal behavior, fluorescence and catalytic properties of the complexes for the degradation of methyl orange in a Fenton‐like process were investigated.     

Preparation of star block copolymers with polystyrene‐block‐poly(ethylene oxide) as side chains on hyperbranched polyglycerol core by combination of ATRP with atom transfer nitroxide radical coupling reaction

The star block copolymers with polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) as side chains and hyperbranched polyglycerol (HPG) as core were synthesized by combination of atom transfer radical polymerization (ATRP) with the “atom transfer nitroxide radical coupling” (“ATNRC”) reaction. The multiarm PS with bromide end groups originated from the HPG core (HPG‐g‐(PS‐Br)_n) was synthesized by ATRP first, and the heterofunctional PEO with α‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy group and ω‐hydroxyl group (TEMPO‐PEO) was prepared by anionic polymerization separately using 4‐hydroxyl‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (HTEMPO) as parents compound. Then ATNRC reaction was conducted between the TEMPO groups in PEO and bromide groups in HPG‐g‐(PS‐Br)_n in the presence of CuBr and pentamethyldiethylenetriamine (PMDETA). The obtained star block copolymers and intermediates were characterized by gel permeation chromatography, nuclear magnetic resonance spectroscopy, fourier transform‐infrared in detail. Those results showed that the efficiency of ATNRC in the preparation of multiarm star polymers was satisfactory (>90%) even if the density of coupling cites on HPG was high. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6754–6761, 2008     

相变温度低且宽的含有胆甾烯基和反式-4-烷基环己基苯氧基的二介晶化合物

Unsymmetrical dimesogenic compounds with cholesteryl and 4-（trans-4-n-alkylcyclohexyl）phenoxy parts were synthesized by condensation of cholester-3-yl 6-bromohexanoate with appropriate 4-（trans-4-n-alkylcyclohexyl）- phenols. Structures and thermal phase behaviour of these dimesogenic compounds have been confirmed by IR, IH NMR, elemental analysis, DSC, polarity microscopy and XRD measurements. Their thermal phase behaviour was significantly different with that of other cholesterol-based dimesogens while they exhibited low and wide phase transition temperature.     

ESR study of molecular orientation and dynamics of TEMPO derivatives in CLPOT 1D nanochannels

The molecular orientations and dynamics of 2,2,6,6‐tetramethyl‐1‐piperidinyloxyl (TEMPO) radical derivatives with large substituent groups at the 4‐position (4‐X‐TEMPO) in the organic one‐dimensional nanochannels within the nanosized molecular template 2,4,6‐tris(4‐chlorophenoxy)‐1,3,5‐triazine (CLPOT) were examined using ESR. The concentrations of guest radicals, including 4‐methoxy‐TEMPO (MeO‐TEMPO) or 4‐oxo‐TEMPO (TEMPONE), in the CLPOT nanochannels in each inclusion compound (IC) were reduced by co‐including 4‐substituted‐2,2,6,6‐tetramethylpiperidine (4‐R‐TEMP) compounds at a ratio of 1 : 30–1 : 600. At higher temperatures, the guest radicals in each IC underwent anisotropic rotational diffusion in the CLPOT nanochannels. The rotational diffusion activation energy, E_a, associated with MeO‐TEMPO or TEMPONE in the CLPOT nanochannels (6–7 kJ mol^?1), was independent of the size and type of substituent group and was similar to the E_a values obtained for TEMPO and 4‐ hydroxy‐TEMPO (TEMPOL) in our previous study. However, in the case in which TEMP was used as a guest compound for dilution (spacer), the tilt of the rotational axis to the principal axis system of the g ‐tensor, and the rotational diffusion correlation time, τ_R, of each guest radical in the CLPOT nanochannels were different from the case with other 4‐R‐TEMP. These results indicate the possibility of controlling molecular orientation and dynamics of guest radicals in CLPOT ICs through the appropriate choice of spacer. Copyright © 2016 John Wiley & Sons, Ltd.     

Regiospecific cationic polymerization of spiroorthoesters with different cyclic ether ring sizes

Spiroorthoesters (SOEs), cis‐2,3‐tetramethylene‐1,4,6‐trioxaspiro[4,5]decane ( I ) and cis‐2,3‐tetramethylene‐1,4,6‐trioxaspiro[4,6]undecane ( II ), with different cyclic ether ring sizes were synthesized, and their stereostructure and steric energy were determined. With steric‐hindrance‐sensitized 9‐phenyl‐9,10‐dihydro‐anthracen‐10‐ylium cation as an initiator, I and II underwent regiospecific polymerization to yield trans form of stereoregular poly(ether esters)—poly(trans‐2‐oxycyclohexyl pentanoate) (? [trans‐2‐OCHP]_n? ) ( III ) and poly(trans‐2‐oxycyclohexyl hexanoate) (? [trans‐2‐OCHH]_n? ) ( V ), respectively. With SnCl₄ as another initiator, I and II underwent regiospecific polymerization through different mechanisms to afford cis form poly(cis‐2‐oxycyclohexyl pentanoate) (? [cis‐2‐OCHP]_n? ) ( IV ) and trans form (? [trans‐2‐OCHH]_n? ) ( VI ) stereoregular poly(ether esters). The polymerization mechanisms of SOEs proceeded in the regiospecific manner were determined by the relationship among the sterostructures of SOEs and its subsequently formed polymers, the steric energy of monomers, and the free energy difference in the transition state of reaction. Owing to the conversion of cis substitution at C‐2 and C‐3 in I or II to the trans form during polymerization, polymers III , V , and VI exhibited a higher volume of expansion during polymerization than IV , which showed high volume shrinkage. Group contributions of divalent trans‐ and cis‐1.2‐cyclohexyl groups were derived and confirmed by measuring the densities of the corresponding stereoregular polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Linear tetrablock quaterpolymers via triple click reactions,azide‐alkyne,diels–alder,and nitroxide radical coupling in a one‐pot fashion

Azide‐alkyne and Diels–Alder click reactions together with a click‐like nitroxide radical coupling reaction were used in a one‐pot fashion to generate tetrablock quaterpolymer. The various living polymerization generated linear polymers with orthogonal end‐functionalities, maleimide‐terminated poly(ethylene glycol) (PEG‐MI), anthracene‐ and azide‐terminated polystyrene, alkyne‐ and bromide‐terminated poly(tert‐butyl acrylate) or alkyne‐poly(n‐butyl acrylate), and tetramethylpiperidine‐1‐oxyl (TEMPO)‐terminated poly(ε‐caprolactone) (PCL‐TEMPO) were clicked together in a one‐pot fashion to generate PEG‐b‐PS‐b‐PtBA‐b‐PCL or PEG‐b‐PS‐b‐PnBA‐b‐PCL quaterpolymer using Cu(0), CuBr, and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst in dimethyl formamide at 80 °C for 36 h. Linear precursors and target quaterpolymers were analyzed via ¹H NMR and gel permeation chromatography. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011