Synthesis and structural characterization of dendritic‐linear PMA‐APM‐r‐PS copolymers for a self‐assembled microporous matrix

A set of dendritic‐linear copolymers, poly(maleic anhydride‐grafted‐3,3′‐dimethyl‐(4‐aminophenylazanediyl)bis(2‐methylpropanoate))‐random‐polystyrene (PMA‐APM‐r‐PS), was successfully prepared by copolymerization of the novel dendritic macromonomer, 4‐(4‐(bis(3‐(4‐(bis(3‐methoxy‐2‐methyl‐3‐oxopropyl)amino)phenylamino)‐2‐methyl‐3‐oxopropyl)amino)phenylamino)‐4‐oxobut‐2‐enoic acid (MA‐APM), with styrene monomer. The dendritic MA‐APM macromonomer dendron 3,3′‐dimethyl‐(4‐aminophenylazanediyl)bis(2‐methylpropanoate) (APM) was then grafted by using the divergent growth method. FTIR, ¹H NMR, and ¹³C NMR spectra were used to identify the structures of the dendron, the dendritic macromonomer, and the dendritic‐linear PMA‐APM‐r‐PS copolymer. Furthermore, microporous dendritic‐linear PMA‐APM‐r‐PS copolymer films were prepared by using solvent‐induced phase separation at room temperature. We investigated the phase separation behavior and morphological structures of the dendritic‐linear copolymer film as functions of dendritic GMA‐HPAM segments in the content using SEM. Self‐assembly of the dendritic‐linear PMA‐APM‐r‐PS copolymer in the MG2‐X system, which represented the second generation dendron containing X wt % of the dendritic MA‐APM segment, resulted in submicron phase segregation. Interestingly, the submicron phase segregation morphology of the MG2–43 sample presented a uniform size distribution of ordered‐array structures. The results of this study demonstrate that controlling the appropriate macromonomer content via the grafting of a three‐dimensional structure results in a self‐assembly process that is capable of providing an ordered‐array microporous morphology in a polymer film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3290–3301, 2010     

树枝状嵌段聚合物D-PCL-b-PS在不对称末端受限条件下的结晶行为

研究了树枝状嵌段聚合物聚(ε-b-己内酯)-b-聚苯乙烯(D-PCL-b-PS)的分子结构对PCL链段受限结晶行为的影响.首先,通过活性正离子开环聚合(ROP)合成了树枝状的嵌段聚合物D-PCL.在此基础上用原子转移自由基聚合(ATRP)的方法,合成了树枝状的嵌段聚合物D-PCL-b-PS,在结晶的PCL链段的两个末端...     

Facile synthesis of dumbbell‐shaped dendritic‐linear‐dendritic triblock copolymer via reversible addition‐fragmentation chain transfer polymerization

We report the first instance of facile synthesis of dumbbell‐shaped dendritic‐linear‐dendritic triblock copolymer, [G‐3]‐PNIPAM‐[G‐3], consisting of third generation poly(benzyl ether) monodendrons ([G‐3]) and linear poly(N‐isopropylacrylamide) (PNIPAM), via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The key step was the preparation of novel [G‐3]‐based RAFT agent, [G‐3]‐CH₂SCSSCH₂‐[G‐3] (1), from third‐generation dendritic poly(benzyl ether) bromide, [G‐3]‐CH₂Br. Due to the bulky nature of [G‐3]‐CH₂Br, its transformation into trithiocarbonate 1 cannot go to completion, a mixture containing ～80 mol % of 1 and 20 mol % [G‐3]‐CH₂Br was obtained. Dumbbell‐shaped [G‐3]‐PNIPAM₃₁₀‐[G‐3] triblock copolymer was then successfully obtained by the RAFT polymerization of N‐isopropylacylamide (NIPAM) using 1 as the mediating agent, and trace amount of unreacted [G‐3]‐CH₂Br was conveniently removed during purification by precipitating the polymer into diethyl ether. The dendritic‐linear‐dendritic triblock structure was further confirmed by aminolysis, and fully characterized by gel permeation chromatography (GPC) and ¹H‐NMR. The amphiphilic dumbbell‐shaped triblock copolymer contains a thermoresponsive PNIPAM middle block, in aqueous solution it self‐assembles into spherical nanoparticles with the core consisting of hydrophobic [G‐3] dendritic block and stabilized by the PNIPAM central block, forming loops surrounding the insoluble core. The micellar properties of [G‐3]‐PNIPAM₃₁₀‐[G‐3] were then fully characterized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1432–1445, 2007     

Transition metal-catalyzed one-pot synthesis of water-soluble dendritic molecular nanocarriers

Here, we report the first example of transition metal-catalyzed one-pot synthesis of water-soluble dendritic molecular nanocarriers behaving like unimolecular micelles. Using the palladium-alpha-diimine chain walking catalyst, copolymerization of ethylene and comonomer 3 afforded, in one step, amphiphilic copolymer 1 having a hydrophobic core and a hydrophilic shell. A much larger amphiphilic core-shell copolymer 2 was synthesized by a two-step approach: a copolymer having many free hydroxyl groups was first prepared, which was subsequently coupled to poly(ethylene glycol) (PEG) to afford the copolymer 2. Light-scattering, fluorescence, and UV/vis spectroscopic studies with Nile Red in aqueous solution showed unimolecular micellar properties for both copolymers 1 and 2. The dye encapsulation capacity for the core-shell copolymers is nearly proportional to the molecular weight of the hydrophobic core. The unimolecular micellar properties coupled with the good water solubility and biocompatibility of the PEG moieties make these molecular nanocarriers promising candidates for many applications including drug delivery and controlled drug release.     

Copolymerization behavior of direct polycondensation of AB2 and AB monomers that forms hyperbranched aromatic polyamide copolymers

The copolymerization behavior of the one‐step direct polycondensation of 3,5‐bis‐(4‐aminophenoxy)benzoic acid (AB₂ monomer) and 3‐(4‐aminophenoxy)benzoic acid (AB monomer) was investigated by IR and ¹³C NMR measurements. IR measurements revealed that the content of the AB₂ units in the polymer was higher in the early stages of polymerization. ¹³C NMR spectra of the polymers indicated that the number of dendritic units increased slowly with increasing reaction time. The stepwise copolymerization of the AB₂ and AB monomers was also carried out, and the structure was analyzed by ¹³C NMR measurements. Copolymer synthesized stepwise by adding AB₂ monomer first (polymer II ) had more dendritic units and less terminal units as compared with the one‐step copolymer (polymer I ). Copolymer synthesized stepwise by adding AB monomer first gave a resulting copolymer (polymer III ) composed of long AB chains. The solubility of the stepwise copolymers was low, and the inherent viscosity was high in comparison with the one‐step copolymer as a result of the difference in architecture of the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3304–3310, 2001     

Solution behavior of linear-dendritic rod diblock copolymers in methanol

The solution behavior of spherical dendrimers as well as hybrid-linear dendritic diblock copolymers has been extensively studied, and the size, shape, and ability of these polymers to encapsulate small molecules have led to their comparison with traditional micelles. We have recently reported the synthesis of a new dendritic copolymer architecture, the linear-dendritic rod diblock copolymer, and in this work, we examine the solution behavior of these unique polymers in methanol at 25 degrees C, using dynamic light scattering and intrinsic viscosity measurements. The diblock copolymers consist of a linear poly(ethylene oxide)-poly(ethylene imine) diblock copolymer backbone around which poly(amido amine) branches have been divergently synthesized from the poly(ethylene imine) block. The hydrodynamic radii and the viscometric radii of the polymers were found to increase slowly with increasing generation up to generation 3.5; however, after generation 3.5, the radii were found to increase very rapidly. This increase can be explained by an elongation of the dendritic block into a more rodlike configuration and a corresponding breakdown of the spherical approximation used to calculate the radii. The intrinsic viscosity of the amine and ester terminated polymers was found to follow two very different trends at low generation; however, at higher generations, they followed similar, yet slightly different, curves with the values for the amine terminated polymers only a little larger than those of the ester terminated polymers. At low generations, the chemistry of the end groups and its interaction with the solvent were found to be more important, whereas at higher generations, the highly branched nature of the dendritic block was the more important factor. For the ester terminated polymers, a maximum in the intrinsic viscosity occurred at generation 1.5. Since this maximum occurred at a much lower generation number than is traditionally seen for spherical dendrimers, new scaling relations for the intrinsic viscosity of dendritic rod polymers were developed and were found to support this observation. A minimum in the intrinsic viscosity was also observed at generation 3.5 for the ester terminated polymers and a minimum or leveling off in the intrinsic viscosity at generation 4.0 was found for the amine terminated polymers, which can be attributed to the transitioning of the polymers to a more elongated, rodlike shape and the increased influence of the shape factor on the intrinsic viscosity.     

Crystallization behavior and micelle formation of star-shaped amphiphilic block copolymer based on dendritic poly(ether-amide)

The star-shaped amphiphilic block copolymer (DPEA-PCL-PEG) was prepared through ring opening polymerization of ε-caprolactone (CL) initiated by hydroxyl end-capped dendritic poly(ether-amide) (DPEA-OH), then coupling with monomethoxy-terminated poly(ethylene-glycol) (PEG) via an esterification process. The molecular structure was verified by FT-IR, ¹H NMR and gel permeation chromatography (GPC). The number average molecular weight of the PCL arm was calculated to be about 1910 g mol⁻¹ by ¹H NMR analysis. The number average molecular weight of the copolymer was determined to be 74,020 with the molecular weight distribution of 1.15 by GPC. The DSC and X-ray diffraction analysis indicated that the copolymer possesses double melting and crystallization peaks, attributed to PCL and PEG segments in DPEA-PCL-PEG. The corresponding melting and crystallization temperature, and value of crystallinity are much lower than that of their individual homopolymers. The copolymer easily formed the core-shell structural nanoparticles as micelles in water with a lower critical micelle concentration of 5.524 mg l⁻¹.     

Linear‐dendritic block copolymer hosts for the encapsulation of electro‐optic chromophores via H‐Bonding

Linear‐dendritic block copolymer hosts were synthesized by end‐functionalizing poly(methylmethacrylate) with dendrons that acted as hydrogen‐bonding acceptors for nonlinear optical chromophores. Second harmonic generation experiments indicate that the d₃₃ coefficients and maximum chromophore loading are increased in linear‐dendritic block copolymer hosts over comparable homopolymer hosts. Transmission electron microscopy shows 5–10 nm chromophore domains, confirming the effective spatial dispersion of the chromophores. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5017–5026, 2009     

Synthesis and MALDI‐TOF analysis of dendritic‐linear block copolymers of lactides: Influence of architecture on stereocomplexation

Formation of a stereocomplex from polylactide copolymers can be tuned by changing the size and the chain topology of the second block in the copolymer. In particular, the use of a dendritic instead of linear architecture is expected to destabilize the cocrystallisation of polylactide blocks. With this idea in mind, dendritic‐linear block copolymers were synthesized by ring‐opening polymerization (ROP) of lactides using benzyl alcohol dendrons of generation 1–3 as macroinitiators and stannous octoate as catalyst. Polymers with controlled and narrow molar mass distribution were obtained. The MALDI‐TOF mass spectra of these dendritic‐linear block copolymers show well‐resolved signals. Remarkably, 10% or less of odd‐membered polymers are present, indicating that ester‐exchange reactions which occur classically parallel to the polymerization process, were in these conditions, very limited. Thermal analysis of polyenantiomers of generation 1–3 and the corresponding blends were examined. The blend of a pair of enantiomeric dendritic‐linear block copolymers exhibit a higher melting temperature than each copolymer, characteristic for the formation of a stereocomplex. Melting temperatures are strongly dependent on the dendron generation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6782–6789, 2006     

树枝状聚(醚-酰胺)基胶束的制备及其形貌研究

采用ε-己内酯(CL)开环聚合的方法首先合成树枝状聚(醚-酰胺)基(DPEA)星形聚合物star-PCL,再与异氰酸基封端的PEG(PEG-NCO)偶合制备了两亲性树枝状聚(醚-酰胺)基星形嵌段聚合物star-PCL-b-PEG.利用FT-IR、1H-NMR和GPC分析测试手段对star-PCL-b-PEG的结构进行了表征.通过滴加选择性溶剂的方法,制备了star-PCL-b-PEG以水为介质的类似"平头"聚集体胶束溶液.采用荧光光谱法测得star-PCL-b-PEG水溶液的临界胶束浓度(CMC)为1.623mg/L;采用激光光散射仪测得其在浓度0.15mg/mL和0.5mg/mL的流体力学半径分别为86.2nm和224.6nm,其多分散指数分别为0.115和0.197.透射电镜(TEM)观察发现胶束的形貌受共溶剂的特性,初始聚合物浓度,水含量等因素的影响.     

Linear‐Dendritic Alternating Copolymers

Herein, the design, synthesis, and characterization of an unprecedented copolymer consisting of alternating linear and dendritic segments is described. First, a 4th‐generation Hawker‐type dendron with two azide groups was synthesized, followed by a step‐growth azide‐alkyne “click” reaction between the 4th‐generation diazido dendron and poly(ethylene glycol) diacetylene to create the target polymers. Unequal reactivity of the functional groups was observed in the step‐growth polymerization. The resulting copolymers, with alternating hydrophilic linear and hydrophobic dendritic segments, can spontaneously associate into a unique type of microphase‐segregated nanorods in water.     

Amphiphilic linear-dendritic triblock copolymers composed of poly(amidoamine) and poly(propylene oxide) and their micellar-phase and encapsulation properties

A novel amphiphilic ABA dendritic-linear-dendritic block copolymer consisting of poly(amidoamine) and poly(propylene oxide) has been synthesized. The solution-phase behavior of the block copolymer was studied as a function of the generation of the dendritic block, ionic strength, and solution pH. The triblock self-assembles in aqueous media to form stable micelles with CMC values ranging from 10(-6) to 10(-5) M. Dynamic light scattering results indicate the formation of particles ranging from 9 to 18 nm in diameter, with smaller diameters exhibited at higher generations. Additional experiments were performed to assess the feasibility of the nanoparticles for drug delivery applications. Drug loading studies were performed with a model hydrophobic drug, triclosan, resulting in high loading efficiencies ranging from 79 to 86%w/w. The dendritic-linear-dendritic block copolymer synthesized was found to be a promising candidate for drug delivery due to its relative stability in aqueous solution and its drug encapsulation and release properties.     

Synthesis and bulk assembly behavior of linear–dendritic rod diblock copolymers

Dendritic rod structures can be formed via the branching of dendritic elements from a primary polymer backbone; such systems present an opportunity to create nanoscale material structures with highly functional exterior regions. In this work, we report for the first time the synthesis of a hybrid diblock copolymer possessing a linear–dendritic rod architecture. These block copolymers consist of a linear poly(ethylene oxide)–poly(ethylene imine) diblock copolymer around which poly(amido amine) branches have been divergently synthesized from the poly(ethylene imine) block. The dendritic branches are terminated with amine or ester groups for the full generations and half‐generations, respectively; however, the methyl ester terminal groups can also be readily converted into alkyl groups of various lengths, and this allows us to tune the hydrophilic/hydrophobic nature of the dendritic block and, therefore, the amphiphilic properties of the diblock copolymer and its tendencies toward microphase separation. The block copolymers exhibit semicrystallinity due to the presence of the poly(ethylene oxide) block; however, as the polymer fraction consisting of poly(ethylene oxide) decreases, the overall crystallinity also decreases, and it approaches zero at generation 2.0 and higher. The unfunctionalized block copolymers show weak phase segregation in transmission electron microscopy and differential scanning calorimetry at all generations. The addition of n‐alkyl chains increases phase segregation, particularly at high alkyl lengths. The generation 3.5 polymer with n‐dodecyl alkyl substitution has a rodlike or wormlike morphology consisting of domains of 4.1 nm, equivalent to the estimated cross section of the individual polymer chains. In this case, the nanometer scale of the polymer chains can be directly observed with transmission electron microscopy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2784–2814, 2004     

The effect of dendritic pendants on the folding of amphiphilic copolymers via supramolecular interactions

The supramolecular folding of amphiphilic heterograft copolymers equipped with dendritic pendants is investigated using a combination of proton nuclear magnetic resonance (¹H NMR) spectroscopy, small‐angle X‐ray scattering, and circular dichroism spectroscopy. Hereto, the linear poly(ethylene glycol) pendants normally used to convey water compatibility are partially substituted with branched analogues. For one set of copolymers, second‐generation polyglycerol dendrons are directly attached to the polymer backbone, while for the other a hydrophilic linker is placed in between. The results show that the branching of the hydrophilic pendants affects the local structure of the folded copolymer but does not influence the overall conformation and single‐chain character of the folded copolymers in solution. All copolymers fold into 4–5 nm single‐chain polymeric nanoparticles with a very compact spherical morphology, independent of the dendritic content of the copolymer. Intriguingly, the incorporation of the dendritic pendants affects the formation of a structured interior even at low incorporation ratios. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 411–421     

多色显示树枝状聚(3, 6-双噻吩咔唑)及其共聚物的电化学和电致变色性能

设计合成了一种新型的基于咔唑单元的树枝状3, 6-双噻吩咔唑衍生物(BTCPh),通过电化学聚合法制备出其均聚物及与3, 4-乙烯二氧噻吩(EDOT)的共聚物薄膜.利用电化学工作站-紫外可见光谱联用装置对两种聚合物的光谱电化学和电致变色(EC)性能进行表征.测试结果表明,均聚物(PBTCPh)薄膜在不同电压下可显示黄、绿、蓝、灰四种颜色;而EDOT单元的引入使共聚物P(BTCPh-EDOT)进一步增加了掺杂态,从而显示出更加丰富的五种颜色(橙、绿、棕绿、蓝、灰).此外,两种聚合物薄膜均具有良好的光学对比度和快速的响应速度,因而使其在智能窗及显示器方面展现了潜在的应用前景.     

Amphiphilic dendritic copolymers of tert‐butyl‐glycidylether and glycidol as a nanocontainer for an anticancer ruthenium complex

Dendritic copolymers comprising a hydrophobic core and hydrophilic shell with nearly equal numbers of hydroxyl groups in the shell and different densities in the core were prepared by a multi‐step process based on anionic ring‐opening polymerization. The diversity in the core density was obtained by using copolymer stars with poly(tert‐butyl‐glycidylether)‐block‐polyglycidol arms with nearly equal length of hydrophobic blocks and numbers of hydroxyl groups of polyglycidol but different numbers of arms as macroinitiators. The ability of the dendritic copolymers to serve as a nanocontainer for a ruthenium complex Ru(NH₃)₃Cl₃ with anticancer properties was studied. The possibility of improving the water solubility of this poorly soluble drug by loading it onto dendritic copolymers was investigated. The hydroxyl groups of the dendritic copolymers were used for complexation of the ruthenium compound to the shell. The loading efficiency was analyzed by UV–vis spectroscopy. The dendritic nanoparticles in their hydrated state were visualized using cryo‐TEM. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3488–3497     

聚醚树枝体线性聚(N-异丙基丙烯酰胺)不对称嵌段共聚物的 合成及自组装

采用原子转移聚合方法合成了聚N-异丙基丙烯酰胺和聚醚树技体的不对嵌段共聚物Dendr.PE-PNI-PAM。实验结果表明Dendr.PE-PNIPAM分子在水中能通过疏水缔合作用形成具有双分子膜结构的超分子聚集体。临界缔合浓度(CAC)、聚集体的大小及形貌对树枝体的代数具有明显的依赖关系。该聚集体对温度刺激具有响应性,并在人体体温温度(37.5℃)发生相转变。在高于相转变温度时,Dendr.PE-PNIPAM分子形成管状、带状等多重形态的超级结构的聚集体。     

树枝聚醚改性聚丙烯酰胺和阴离子表面活性剂的缔合行为

采用粘度法、荧光探针技术和^1H NMR驰豫和自扩散方法，研究了树枝聚醚疏 水改性丙烯酰胺共聚物(PDAM)和十二烷基硫酸钠(SDS)在水溶液中的相互作用．这 种共聚物含有少量的树枝聚醚，具有疏水性，容易和SDS发生相互作用，在表面活 性剂浓度远低于临界胶束浓度(cmc)的情况下，生成混合胶束状聚集体．它们的缔 合行为和溶液性质明显地取决于表面活性剂的浓度，随着聚合物溶液中加入SDS， 溶液粘度发生急剧变化，并在较低的表面活性剂浓度处出现很大的最高点．荧光和 ^1H NMR测定结果表明，这是由于在不同SDS浓度范围内，PDAM/SDS形成的聚集体结 构不同的缘故．     

Structure-selective dye uptake into an aggregate of a copolymer with linear polyelectrolyte block and hydrophobic block carrying pendant dendritic moiety in water

Selective uptake of various dyes into an aggregate of amphiphilic copolymer consisting of a hydrophilic linear polyelectrolyte block and hydrophobic block carrying pendant dendritic moiety has been investigated in water. The copolymer associated into an aggregate with a hydrophobic interior at concentrations above 0.2 mg cm(-3). The uptake (23 and 36 molecules per aggregate, respectively) of pyrene and Oil Yellow in an aggregate was one order higher than that of benzo[a]pyrene and SudanIII. The hydrophobic dyes are always doped in the interior of the aggregate, but the difference in uptake among dyes may depend on their structure. Even if a large number of guest molecules was doped into the interior of an aggregate, the size of the sphere-like aggregate was conserved. It is suggested that guest molecules are encapsulated into the persisting cavity within and between hydrophobic dendron moieties in an aggregate. Structure-selective uptake reported in this investigation is a unique character of an aggregate of copolymer with dendron moiety because the dendron moiety offers a large void for doping.     

Computer simulation of architectural and molecular weight effects on the assembly of amphiphilic linear-dendritic block copolymers in solution

Langevin dynamics simulations are performed on linear-dendritic diblock copolymers containing bead-spring, freely jointed chains composed of hydrophobic linear monomers and hydrophilic dendritic monomers. The critical micelle concentration (CMC), micelle size distribution, and shape are examined as a function of dendron generation and architecture. For diblock copolymers with a linear block of fixed length, it is found that the CMC increases with increasing dendron generation. This trend qualitatively agrees with experiments on linear-dendritic diblock and triblock copolymers with hydrophilic dendritic blocks and hydrophobic linear blocks. The flexibility of the dendritic block is altered by varying the number of spacer monomers between branch points in the dendron. When comparing linear-dendritic diblock copolymers with similar molecular weights, it is shown that increasing the number of spacer monomers in the dendron lowers the CMC due to an increase in flexibility of the dendritic block. Analysis on the micellar structure shows that linear-dendritic diblock copolymers pack more densely than what would be expected for a linear-linear diblock copolymer of the same molecular weight.