Carbamoylmethylphosphine oxide derivatives of adamantane as extracting agents of americium and europium

Adamantane di-1,3-carbamoylmethylphosphine oxide derivatives were synthesized. Their efficiency in extraction of americium(III) and europium(III) from nitric acid solutions was shown. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 110–115, January, 2007.     

Synthesis and structures of oligothioarylenecyclophosphonites

A new representative of phospho(scIII)crown ethers was obtained based on 4,4-thiodiphenol and tetraethyldiamide of phenylphosphonous acid. Thiaphospho(III)crown ethers can be prepared by different methods depending on the ratio of the initial reactants and the reaction conditions. The structures of the compounds obtained were confirmed by spectroscopic data and X-ray structural analysis.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2313–2315, September, 1996.     

The photometric determination of Copper by extraction as the Diethyldithiocarbamate. Interferences and their Elimination

Summary Two procedures for the photometric determination of copper as the diethyldithiocarbamate complex have been investigated as to their selectivity.In the first procedure—extraction by chloroform from a citrate solution ofph about 8.5, containing EDTA—the following elements interfere: Hg^II, Ag, Au, Pt, Pd, Os, Sb^III, Te^IV, Tl^III and Bi. Interference by Hg^II, Ag, Pd, Sb^III, Te^IV and Tl^III can be prevented by simple measures.In the second procedure—extraction by a solution of lead diethyldithiocarbamate in chloroform from ammoniacal citrate-only Ag, Tl^III, Bi and Hg^II interfere. Interference by the first three elements can be prevented easily, leaving as the only serious interference in this method mercury in amounts above 500 g.     

Removal of chromate from aqueous solution by reduction with nanoscale Fe–Al layered double hydroxide

Nanoscale layered double hydroxides of Fe^II and Al^III (Fe–Al LDH) have been applied for removal of chromate (Cr^VI) from aqueous solution. Given the reaction stoichiometry, Cr^VI was completely reduced to Cr^III and coprecipitated with Fe^III and Al^III oxyhydroxides. The extent of Cr^VI removal decreased with increasing initial pH and decreasing molar ratio of Cr^VI/structural Fe^II in the LDH. The chromate reduction rate at different initial concentrations of Cr^VI was well described by the pseudo-second-order model with reaction rate constant ranging from 197.4 to 13.53 (mmol min)^?1. Initial pH and substitution of various amounts of Fe^III in the LDH structure had little effect on the reaction rate. Backtransformation of Cr^III to Cr^VI by birnessite Mn oxide (δ-MnO₂) after 40 days of reaction was less than 1% of the initial Cr (as Cr^III solid), indicating high stability of the final reaction products and high efficiency of nanoscale Fe–Al LDHs for removal of chromate from aqueous solution.     

Chromium(VI), chromium(V) and chromium(IV) oxidation of 12-tungstocobaltate(II)

The reaction between Cr^VI and 12-tungstocobaltate(II) was carried out in 2.0 mol dm^–3 HCl and followed a simple second order rate law. The reaction was catalysed by hydrogen ion due to the formation of active H₂CrO₄ and was inhibited by chloride ion as, in its presence, conversion of the active species into inactive chlorochromate occurs. Chromium(V) and chromium(IV) were generated in situ by the use of Cr^VI—V^IV or Cr^VI—2-ethyl-2-hydroxybutyric acid and Cr^VI—i-PrOH reactions respectively, and the oxidation of 12-tungstocobaltate(II) by these atypical oxidation states, was also studied. The rate constants for the oxidation of 12-tungstocobaltate(II) by Cr^VI, Cr^V and Cr^IV were found to be in the ratio 1:1.2:5.2 respectively. The ionic strength did not affect the reaction, while decrease in the solvent polarity increased the rate of the reaction. The activation parameters were also determined and the values H , G and S were found to be 52.4 ± 6 kJ mol^–1, 100.8 ± 7 kJ mol^–1, –151.7 ± 10 J K^–1 mol^–1 respectively, supporting the mechanism proposed.     

8-Hydroxyquinoline and 8-hydroxyquinaldine as reagents for the colorimetric estimation of chromium

Summary A simple colorimetric method for the estimation of Cr^III ions, employing 8-hydroxyquinoline and 8-hydroxyquinaldine, has been described. It has been shown that upto a concentration ratio of 13, the presence of Al^III ions, does not interfere with the 8-hydroxyquinaldine reagent. The method has been further shown not to be interfered by the presence of Ce^III, Ni^II, W^VI, Mn^II, Th^IV, Zn^II, Tl^I, and Ba^IIions, but the presence of Fe^II, Fe^III, U^VI, Cu^II, Co^II and Mo^VIions affects the results. It is found to be necessary to heat the reaction mixture, before carrying out the extraction process.     

Photometrische Bestimmung kleiner Mengen Zinn mit Brompyrogallolrot

Zusammenfassung Zinn gibt in essigsaurer Lösung mit Brompyrogallolrot einen 11-Komplex mit einem Absorptionsmaximum bei 515 nm und dem Extinktions-koeffizienten = 18000 l/Mol · cm. Die Farbbildung ist unabhängig von der Wertigkeitsstufe und eignet sich zur photometrischen Bestimmung des Zinns. Günstigster Meßbereich: 6–90 g Sn in 25 ml. Störungen durch andere Elemente — außer der durch Sb^III und Ag — können durch vorherige Extraktion des Sn als SnJ₄ vermieden werden.

---

Summary Tin forms a 11-chelate with bromopyrogallol red in acetic acid solution. The maximum absorptivity coefficient is = 18000l/Mol · cm at 510nm. The colour production is independent of the valence state of the tin and can be used for photometric determination. Optimum range for measurement: 6–90 g tin in 25 ml. Interferences caused by other cations — except those of Sb^III and Ag — are prevented by extraction of tin as SnI₄.

---

---

Wir danken der Deutschen Forschungsgemeinschaft und dem Verband der Chemischen Industrie (Fonds der Chemie) für Sachbeihilfen. Besonders sei auch Frl. Strehlau, Frl. Wortberg, Frl. Zuber, Herrn Höhn und Herrn Jackisch für die interessierte Mitarbeit bei der Überprüfung der Methode gedankt.     

Synthesis and magnetic properties of trinuclear chromium(III)palladium(II)-chromium(III) complexes bridged by extended dioximato groups

Summary Heterotrinuclear Cr^III-Pd^II-Cr^III complexes of formulae [Cr(salen)-Pd(dmg)₂-Cr(salen)]·H₂O (1), [Cr(salen)-Pd(-BD) ₂-Cr(salen)]·H₂O (2) and [Cr(salen)-Pd(-FD) ₂-Cr(salen)]·2H₂O (3) [dmg^2- =dimethyl-glyoximato, (-BD)^2/2- = -benzyldioximato, (-FD)^2/2- = -furildioximato and salen^2– = N,N-ethylenebis(salicylideneiminate)] have been prepared and characterized by elemental analysis, i.r. and electronic spectroscopies, and molar conductances. These complexes are thought to contain extended diomixato bridges. The magnetic properties of complex (1) has been investigated over the 80–300 K range and corresponds to what is expected for an antiferromagnetic Cr^III-Cr^IIIi pair with S _Cr = 3/2 and S _Pd = 0 (Pd²⁺ is a diamagnetic in a square-planar environment) local spins. The exchange integral (J) was evaluated as -3.38cm^–1 using the spin Hamiltonians = -2J _{A B}(S _A = S _B = 3/2).     

Preparation and reactivity of polyfunctional six- and eight-membered cyclic silicates

Six- and eight-membered cyclic silicates with reactive SiH or Si-vinyl functional groups have been prepared: hexakis(dimethylsiloxy)cyclotrisiloxane (I), hexakis(vinyldimethylsiloxy)cyclotrisiloxane (II), octakis(dimethylsiloxy)cyclotetrasiloxane (III) and octakis(vinyldimethylsiloxy)cyclotetrasiloxane (IV). Reaction of pseudo wollastonite (Ca₃Si₃O₉) with dimethylchlorosilane or vinyldimethylchlorosilane gives I and II, respectively. IV has been prepared similarly by reaction of octakis[chloro calcium oxy]cyclotetrasilicate [Ca₈Si₄O₁₂Cl₈] with vinyldimethylchlorosilane. On the other hand, acid catalyzed siloxane exchange between tetramethyldisiloxane and octakis(trimethylsiloxy)cyclotetrasiloxane (V) gave III. Cyclic silicates (I-VI) are surprisingly resistant to acid catalyzed ring opening polymerization. In addition, II, IV, V and hexakis(trimethylsiloxy)cyclotrisiloxanes (VI) are resistant to phosphazene P₄-t-Bu superbase catalyzed ring opening polymerization.     

Kinetics and mechanism of the homogeneous reaction between some manganese(III)-Schiff base complexes and hydrogen peroxide in aqueous and sodium dodecyl sulphate solutions

Summary The kinetics of the reaction between H₂O₂ and some Schiff base complexes of Mn^III have been investigated in both aqueous and micellar sodium dodecyl sulphate (SDS) solution. The reaction rate is first order in both H₂O₂ and [complex], and inversely proportional to [H⁺]. The second-order rate constant increases in the sequence [Mn(salophen)(OAc)] > [Mn(salen)(OH₂)]-ClO₄ > [Mn(salen)(OAc)]H₂O, where salen = N,N-bis-(salicylidene)ethylenediamine and salophen = N,N-bis-(salicylidene)-o-phenylenediamine. At SDS concentrations below the critical micellar concentration, there is almost no effect on the rate of reaction whereas at higher concentrations the reaction rate increases slightly. A mechanism involving Mn^II and a peroxo intermediate is proposed.     

New organosilicon derivatives of some analytical reagents: sorbents and metallochromic agents

A synthesis of organosilicon monomeric and polymeric derivatives of 1,4-phenylenediamine, 4-aminoantipyrine, and aniline, which are analytical agents possessing sorption properties, was accomplished. The synthesized organosilicon polymers were studied as sorbents of heavy metals Fe^III, Hg^II and noble metals Ag^I, Au^III, Rh^III, Pd^II, Pt^IV. Poly[(3-N-silsesquioxanylpropyl-4aminoantipyrine)] exhibited high sorption activity with respect to platinum group metals in comparison with poly[N,N´-bis(3-silsesquioxanylpropyl)-1,4-phenylenediamine]. The reaction of poly[(3-N-silsesquioxanylpropyl-4-aminoantipyrine)] practically with all the elements under study was accompanied by coloring. The starting monomer exhibited similar metallochromic properties.     

Control of Oxidation States of Transition Elements (Cr,Mn) in Nitridometalates and the Solid Solution Series Li6(Ca1‐xSrx)2[Mn2N6]

The formation of ternary nitridometalates from the elements in the case of the systems Li—Cr, V, Mn—N leads to compounds which contain the transition metals in the highest (V^V, Cr^VI) or a comparably high (Mn^V) oxidation state. In the corresponding calcium and strontium systems, the transition metals show a lower oxidation state (V^III, Cr^III, Mn^III). Transition metals with intermediate oxidation states (Cr^V, Mn^IV) are present in the quaternary (mixed cation) compounds Li₄Sr₂[CrN₆], Li₆Ca₂[MnN₆], and Li₆Sr₂[MnN₆] (R3¯(#148), a = 585.9(3) pm, c = 1908.6(4) pm, Z = 3), as well as in the solid solution series Li₆(Ca_1—xSr_x)₂[MnN₆].     

Synthesis,crystal structure and some properties of new perrhenate and pertechnetate complexes of Nd and Am with 2,6-bis(tetramethylfurano)-1,2,4-triazin-3-yl)-pyridine,tris(2-pyridylmethyl)amine and N,N′-tetraethylmalonamide

The coordination complexes of trivalent f-element pertechnetates and perrhenates with some N-donor ligands were determined by using X-ray structural analysis: Nd³⁺ perrhenate with 2,6-bis(tetramethylfurano)-1,2,4-triazin-3-yl)-pyridine ([Nd(FBTP)₃ReO₄](ReO₄)₂ · 2H₂O (I)), tris(2-pyridylmethyl)amine ([Nd(TPA)(ReO₄)₃] (II)) and N,N′-tetraethylmalonamide ([Nd(TEMA)₄](ReO₄)₃ (III)). The coordination number of Nd is 10 in I, 9 in II and 8 in III. The complexes of Nd³⁺ pertechnetate and Am³⁺ pertechnetate with TPA have been also synthesized (Nd(TPA)(TcO₄)₃ (IV) and Am(TPA)(TcO₄)₃ (V)). The structure II does not change on replacement of perrhenate by pertechnetate and neodymium by americium.     

Plutonium and americium in sediment samples along the Romanian sector of the Danube river and the Black Sea coast

The concentrations of²³⁸Pu,^239,240Pu and²⁴¹Am were determined in eight sediment samples, collected from the bed of the Romanian sector of the Danube river and the Black Sea coast during 1994 and 1995. Fusion with potassium carbonate was used to achieve complete dissolution of the samples. Tracers,²⁴²Pu and²⁴³Am, were added and the separation of plutonium from americium, uranium and thorium was performed by anion exchange. Americium was separated from uranium in two steps, using a conventional anion exchange resin and an extraction chromatographic resin for transuranics. After electrodeposition on stainless steel discs the nuclides were counted with -spectrometry with -PIPS detectors. The total plutonium concentrations obtained by this method were compared with the acid leachable plutonium concentrations reported for the same samples in a previous paper.     

Test Films for the Determination of Aromatic Amines and Hydrazines in Aqueous Solutions

Conditions of the test determination of toxic aniline (I), N,N-dimethylaniline (II), N,N-diethylaniline (III), 2,2,4-trimethyl-1,2-dihydroquinoline (IV), 1,1-dimethylhydrazine (V), and phenylhydrazine (VI) as their 4,6-dinitrobenzofuroxan (I) and 5,7-dinitrobenzofurazan (II, III, IV, V, VI) derivatives in aqueous solutions were found. Visual and spectrophotometric measurement of the signal was used. The reagents were immobilized in nitrocellulose films. Optimal results of visual determination of color development in test films were obtained with reagents immobilized in nitrocellulose at their concentration of 5 mass % and pH of the test solution in the range 6.0–7.5. The spectrophotometric measurement of the signal of test films was performed at wavelengths of 500–560 nm for I, V, and VI and 610–620 nm for II, III, and IV. The detection limit for spectrophotometric measurement was 0.01, 0.18, 0.13, 0.15, 0.16, and 0.04 mg/L for I, II, III, IV, V, and VI, respectively. The analytical range of the toxicants was 0.05–6.0 mg/L. Test determination is possible in the presence of alkylamines, ammonia, phenols, carboxylic acids, and inorganic salts.     

Synthesis and Crystal Structures of Copper(I) Complexes with N-Allylhexamethylenetetraminium Chloride Obtained in Different Acidic Media

The crystals of [(CH₂)₆N₄(C₃H₅)]Cu₂Cl₃ (I), [(CH₂)₆N₄(C₃H₅)]Cu₂Cl₃ (II), and [(CH₂)₆N₄(C₃H₅)]CuCl₂ (III) complexes were electrochemically synthesized (ac) from CuCl₂ · 2H₂O and N-allylhexamethylenetetraminium chloride in ethanol solutions at pH 6, 4.5, and 3. Their structures were determined using X-ray diffraction analysis (DARCh diffractometer, MoK radiation, /2 scan mode). Complex Icrystallizes in the monoclinic system: space group A2/a, a = 24.812(6) Å, b = 8.855(3) Å, c = 12.080(2) Å, = 89.21(3)°, and Z = 8. Complex II crystallizes in the triclinic system: space group P , a = 7.618(2) Å, b = 7.048(2) Å, c = 13.150(3) Å, = 97.50(2)°, = 92.70(2)°, = 100.74(2)°, and Z = 2. The crystals of complex III are orthorhombic: space group Pmn2₁, a = 7.478(2) Å, b = 8.827(2) Å, c = 9.662(3) Å, Z = 2. The organic cation in complex I acts as a tridentate ,,-ligand; that in complex II, as a bidentate ,-ligand. In complex III, the organic cation is involved in coordination with the copper(I) atom only through one nitrogen atom.     

The supramolecular structures and reactivities of some complexes of chiral crown ethers with borane ammonia

Whereas 1 1 crystalline complexes have been isolated between borane ammonia and methyl 4,6-O-benzylidene-2,3-dideoxy--d-galactopyranosido [2,3-b]-1,4,7,10,13,16-hexaoxacyclo-octadecane (1), methyl 4,6-O-benzylidene-2,3-dideoxy--d-mannopyranosido [2,3-b] (methyl 4,6-O-benzylidene-2,3-dideoxy--d-mannopyranosido [2,3-k]-1,4,7,10,13,16-hexaoxacyclo-octadecane (3), and (1R,2R,7R,24R)-3,5,8,11,14,17,20,23,26,28-decaoxatricyclo-[21.4.0.0^2,7]octacosane (4), the hosts, methyl, 4,6-O-benzylidene-2,3-dideoxy--d-mannopyranosido[2,3-b] 1,4,7,10,13,16-hexaoxacyclo-octadecane (2) and 1,4 1,4 3,6 3,6-tetra-anhydro-2,2 5,5-bis-O-oxydiethylenedi-d-mannitol (5) have yielded 2 1 (guest:host) crystalline complexes with borane ammonia as guest. X-ray analyses of the supramolecular structures of BH₃NH₃ ·1, (BH₃NH₃)₂ ·2, BH₃NH₃ ·3, BH₃NH₃ ·4, and (BH₃NH₃)₂ ·5 have been carried out and BH₃NH₃ ·1, BH₃NH₃ ·2, and (BH₃NH₃)₂ ·5 have been shown to reduce acetophenone with enantiomeric excesses of 5, 13, and 10% respectively. Supplementary Data relating to this article (atomic coordinates of the hydrogen atoms and thermal parameters) are deposited with the British Library as Supplementary Publication No. SUP 82017 (74 pages).Dedicated to Professor H. M. Powell.     

Electrochemical synthesis of halogen derivatives of bis(1,2-dicarbollyl)cobalt(III)

A convenient electrochemical method for the synthesis of 8,8-dihalogen derivatives of bis(1,2-dicarbollyl)cobalt(III) anion [8,8X₂-3,3-Co(1,2-C₂B₉H₁₀)]^– (X = Cl, Br, I) was developed. The method includes the electrolysis of a solution of alkaline metal halide and tetramethylammonium salt of bis(1,2-dicarbollyl)cobalt(III) in methanol at 50 °C in a one-compartment electrochemical cell with a nickel cathode and platinum anode.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2448–2451, November, 2004.     

Extraction of uranium and transuranium elements with <Emphasis Type="Italic">tert</Emphasis>-butylthiacalix[4]arene from carbonate-alkaline solutions

Extraction efficiency of uranium and transuranium elements (Np, Pu, Am and Cm) with tert-butylthiacalix[4]arene TCA from carbonate-alkaline solutions is studied and compared with that of europium (III). Plutonium (III, IV) extraction efficiency with TCA is found to be lower comparing with that of trivalent americium and europium. Extraction efficiency of studied radionuclides decreases as following: Am ? Eu ? Pu (III), U(VI), Np (V) > Pu (IV) at pH 12. Carbonate concentration increase in aqueous phase suppresses significantly extraction of all studied radionuclides, except americium. This condition can be used for americium individual recovery from complex radioactive carbonate-alkaline solutions.     

Trace metal-ion catalysis: kinetics and mechanism of oxidation of l-ascorbic acid by chromium(VI) in phosphate buffers

Summary The kinetics of oxidation of l-ascorbic acid (H₂A) by Cr^VI with and without added Cu^II conforms to the stoichiometry represented by the equation: 2Cr^VI + 3H₂A 2Cr^III + 3A + 6H⁺ where A is dehydroascorbic acid. The mode of the electron transfer from H₂A to Cr^VI is suggested to involve oxidative decomposition of an intermediate complex. Catalysis by Cu^II is indicated via complexation of the catalyst and substrate. The inhibitory effects of Cl^–, NO _f3 ^p– and SO _f4 ^p2– ions indirectly support complexation between Cr^VI and H₂A.