Silica supported nanopalladium prepared by hydrazine reduction

Palladium catalysts (1–10 wt.% Pd) supported on silica were prepared by hydrazine reduction of palladium chloride at room temperature. They were characterized by XRD, TEM, EDX, H₂-adsorption, and H₂-TPD and tested in the gas phase hydrogenation of benzene in the temperature range 75–250 °C. A conventional catalyst (1 wt.% Pd) obtained by calcination then hydrogen reduction of the same metal precursor was studied for comparison. Metal particles with a size range 6.8–28.4 nm were obtained. Dispersion, hydrogen storage and activity in benzene hydrogenation increased with decreasing particle size. In comparison, the classical catalyst was found much more dispersed (mean particle size of 1.6 nm) and more active (specific rate 1.6–3.7 times higher) than the homolog hydrazine catalyst. However, unexpectedly, turnover frequency (TOF) calculations indicated a greater reactivity of the metal surface atoms for the hydrazine catalyst. It also stored more hydrogen. These contrasting results are discussed in relation with the metal particle morphology.     

Controlled Growth of Gold Nanoparticles in Aerosol-OT/Sorbitan Monooleate/Isooctane Mixed Reverse Micelles

Stable anisotropic gold nanoparticles were prepared by the reduction of tetrachloroauric acid with hydrazine in mixed reverse micelles formed with anionic surfactant Aerosol-OT and nonionic surfactant sorbitan monooleate (Span80) in isooctane. It was found that the Span80 serves not only as a structure modifier but also as a stabilizer for Au particles, to prevent their further growth and precipitation. The control of particle size, shape, and degree of dispersion was achieved by varying the process variables, such as molar ratio of reduction agent to metal salt, size of water droplets (omega(o)), concentration of metal salt, and sequence of addition of metal salt into the mixed reverse micelles. When the HAuCl(4) was injected directly into the mixed reversed micelles containing hydrazine, nonspherical gold nanoparticles, such as rods and cubes, were obtained at the molar ratio of hydrazine to HAuCl(4) of less than 1.0. The nonspherical Au particles were preferably formed at larger omega(o) value and lower gold salt loading. By the analyses of high-resolution electron microscope, electron diffraction pattern, and energy-dispersive X-ray analysis (EDX), the resultant particles have been found to be pure gold of face-centered cubic structure. Copyright 2000 Academic Press.     

Preparation of thin films comprising palladium nanoparticles by a solid-liquid interface reaction technique

A new approach to the formation of palladium nanoparticulate films with diameter between 6 and 50 nm by the solid-liquid interface reaction technique (SLIRT) has been presented. A solid film of palladium nitrate was formed by the modified spin coating method. This film is subsequently immersed in a reducing solution to initiate a reaction at the interface and ultimately transforms it to a palladium metal film. The kinetics of palladium reduction has been studied by UV-visible spectroscopy. The characterization of the palladium film has been performed by various physicochemical techniques such as XRD, ED, XPS, SEM, EDX, TEM, and UV-visible spectroscopy. The texture and morphology of the materials has been investigated by atomic force microscopy (AFM). At a constant palladium nitrate concentration, the average diameter of palladium nanoparticles decreases with an increase of hydrazine concentration. The effect of concentration of hydrazine on the particle size has been discussed. The palladium film formation mechanism has been proposed for the SLIRT.     

Study of nickel nanoparticles supported on activated carbon prepared by aqueous hydrazine reduction

Nickel nanoparticles were obtained by the reduction in hydrazine aqueous media of nickel acetate as a precursor supported on activated carbon of high surface area. Classical catalysts using nickel acetate or nitrate were prepared for comparison. The catalysts were characterized by N(2) physisorption, H(2)-TPR, H(2)-adsorption, TPD, TEM, and XRD, and tested in the gas phase hydrogenation of benzene. Hydrazine catalysts were found much more active in benzene hydrogenation than corresponding classically prepared catalysts. Remarkably, their reactivity is comparable (turn-over frequency of 0.2001-0.2539 s(-1) at 393 K) to that of Pt classical catalysts supported on activated carbon in the same conditions. Evidence is given for the existence of the hydrogen spillover effect in benzene hydrogenation, not reported before in the literature. As a result of the hydrogen spillover effect, catalysts performances can be explained by a combination of surface metal atom reactivity, metal-support interaction strength, and specific surface area extent. Maximum effect is observed with hydrazine preparation method, for 1% Ni content and nickel acetate as a precursor. Unexpectedly, it was also found that hydrazine preparation increases the specific area of the catalysts.     

Structural and spectroscopic investigation of ZnS nanoparticles grown in quaternary reverse micelles

ZnS nanoparticles were synthesized in four component "water in oil" microemulsions formed by a cationic surfactant (cetyltrimethylammonium bromide, CTAB), a cosurfactant (pentanol or butanol), n-hexane and water. The effect of various parameters (nature of cosurfactant, water/surfactant W(0), and alcohol/surfactant P(0)) on the formation and stability of ZnS nanoparticles was investigated thoroughly. UV-Vis spectroscopy was employed to directly follow the formation of ZnS systems in the microemulsions. Thus, particle size was estimated from the position of the first excitonic transition by employing an approximate finite-depth equation and an empirical correlation, giving average diameters in the ranges 2.3-2.5 and 3.0-3.5nm, respectively. Stable ZnS nanoparticles were obtained by employing low water and high cosurfactant amounts. This suggests that at high concentration the cosurfactant molecules act as capping agents on the surface of the inverse micelles, while low water amounts are needful to obtain water droplets with a radius close to that of the interfacial film spontaneous curvature. HRTEM analysis showed that the samples are formed by a few crystalline ZnS nanoparticles of spherical shape, embedded in and amorphous organic matrix, with a coherent scattering domain between 2 and 4nm.     

Stable photochromism and controllable reduction properties of surfactant-encapsulated polyoxometalate/silica hybrid films

In this paper, we present a novel strategy for fabricating polyoxometalate (POM)-based photochromic silica hybrid films. To combine metal nanoparticles (NPs) into the POMs embedded silica matrix, furthermore, we realized the controllable in situ synthesis of metal NPs in the film by utilizing the reduction property of POMs existing in the reduced state. Through electrostatic encapsulation with hydroxyl-terminated surfactants, the POMs with good redox property can be covalently grafted onto a silica matrix by means of a sol-gel approach, and stable silica sol-gel thin films containing surfactant-encapsulated POMs can be obtained. The functional hybrid film exhibits both the transparent and easily processible properties of silica matrix and the stable and reversible photochromism of POMs. In addition, well-dispersed POMs in a hydrophobic microenvironment within the hybrid film can be used as reductants for the in situ synthesis of metal NPs. More significantly, the size and location of NPs can be tuned by controlling the adsorption time of metal ions and mask blocking the surface. The hybrid film containing both POMs and metal NPs with patterned morphology can be obtained, which has potential applications in optical display, memory, catalysis, microelectronic devices and antibacterial materials.     

石墨烯负载镍催化CO_2加氢甲烷化

采用改进的Hummers法制备了氧化石墨烯(GO),经水合肼还原得到石墨烯(RGO),通过浸渍法制备了石墨烯负载的镍基催化剂(Ni/RGO);对其催化二氧化碳甲烷化反应的性能进行了研究,并与以碳纳米管(CNTs)和活性炭(AC)为载体负载的Ni基催化剂进行了比较.由于催化剂的载体分别为RGO,CNTs和AC,所以Ni将会表现出不同的形态.利用红外光谱(FTIR)、比表面积(BET)测试、程序升温还原(H2-TPR)、X射线衍射(XRD)分析和透射电子显微镜(TEM)等表征手段对其结构及物理性质进行了表征.结果表明,Ni/RGO具有相对较大的比表面积(316 m~2/g),Ni在Ni/RGO上的颗粒尺寸(5.3 nm)小于其在Ni/CNTs(8.9 nm)和Ni/AC(11.6 nm)上的颗粒尺寸;该催化剂在二氧化碳甲烷化反应中具有更高的催化活性和选择性,而且具有良好的使用寿命.     

Deposition of gold nanoparticles on silica spheres by electroless metal plating technique

A previously proposed method for metal deposition with silver [Kobayashi et al., Chem. Mater. 13 (2001) 1630] was extended to uniform deposition of gold nanoparticles on submicrometer-sized silica spheres. The present method consisted of three steps: (1) the adsorption of Sn(2+) ions took place on surface of silica particles, (2) Ag(+) ions added were reduced and simultaneously adsorbed to the surface, while Sn(2+) was oxidized to Sn(4+), and (3) Au(+) ions added were reduced and deposited on the Ag surface. TEM observation, X-ray diffractometry, and UV-vis absorption spectroscopy revealed that gold metal nanoparticles with an average particle size of 13 nm and a crystal size of 5.1 nm were formed on the silica spheres with a size of 273 nm at an Au concentration of 0.77 M.     

The composition and thermal behavior of nanodispersed silica synthesized by micellar technology

Morphology, particle size, and thermal behavior of silicic acid synthesized as gel by micellar technology were determined. It was found that the micellar synthesis using a smaller-molecule solvent, organic acid with shorter hydrocarbon (hydrophobic) part, as surfactant and silicate with smaller-radius cation yields silica gel with smaller particle size and, as consequence, increases silica dispersity. The differential thermal analysis of the synthesized silica gel showed that for samples with lesser particle size the phase transition temperatures are decreased by about 30–100°C.     

Influence of surfactant surface coverage and aging time on physical properties of silica nanoparticles

The experimental results on the influence of surfactant surface coverage and aging time on physical properties of silica nanoparticles were reported. The spherical silica nanoparticles have been synthesized using polyethylene glycol (PEG) as the surfactant and oil shale ash (OSA) as a new silica source. In order to identify the optimal condition for producing the best quality silica nanoparticles with the good dispersion and uniformity, the effects of surfactant surface coverage and aging time were investigated. It was found that the particle size and distribution of silica nanoparticles depend on the concentration of PEG in dispersion. At relatively low concentration, 0–2 wt.%, the existing PEG is not sufficient to prevent further growth of the initially formed silica nanoparticles, leading to large aggregates of silica particles. When the PEG concentration increases to 3 wt.%, self-assembled PEG layer on the surface stabilizes the initially formed silica nanoparticles and the silica particles with average diameter of 10 nm are uniformly distributed. With further increasing the concentration of PEG, the number of PEG aggregates increases and silica nanoparticles are mainly formed inside the entangled PEG chains, resulting in an observation of clusters of silica nanoparticles. Moreover, it was found that as the aging time increased, the shape of silica nanoparticles becomes regular and the particle size distribution becomes narrow.     

Pulsed Current Electrochemical Synthesis of Nickel Nanoclusters and Application as Catalyst for Hydrogen and Oxygen Revolution

The main objective of this research is to prepare nickel nanoparticles with more porous structure by the pulsed current electrochemical method. A nickel optimized nanopowder was synthesized by using nickel chloride (0.005 M) as precursor, silver nitrate as a nucleation agent (at 0.5% mole of nickel salt in the starting solution), polyvinyl pyrrolidone (PVP) as structure director (with PVP/Ni = 1.7 g/g), ammonia (2 M), and hydrazine as reduction agent (with Hydrazine/Ni = 16 g/g) by pulsed current of 58 mA cm⁻² with a frequency of 12 Hz. The morphology and particle size of each synthesized sample was studied by scanning electron microscopy (SEM). The obtained results showed that temperature has no considerable effect on the morphology and particle size of nickel nanopowder. The nickel nanopowder synthesized in optimum conditions has excellent uniform and a more porous structure including nanoclusters with a particle size of approximately 10–20 nm. The obtained results indicate that the pulsed current electrochemical method can be used as a confident and controllable method for the preparation of nickel nanoparticles. Optimized nickel nanoclusters were used as catalyst for hydrogen and oxygen revolutions. Cyclic Voltammetry results showed that the synthesized nanoclusters can facilitate hydrogen reduction and increase hydrogen and oxygen revolution rates.     

SiO_2/PVAc无机-有机复合微球的合成及其膜性能研究

以纳米二氧化硅粒子(SiO2)为稳定剂,在少量反应型阴离子乳化剂——烯丙氧基羟丙磺酸钠(HAPS)作助稳定剂的情况下,制备了具有草莓型结构的二氧化硅/聚醋酸乙烯酯(SiO2/PVAc)无机-有机纳米复合微球.研究表明,纳米SiO2与PVAc的氢键作用是形成这种单分散草莓型SiO2/PVAc无机-有机纳米复合微球的关键.透射电镜(TEM)观察显示,纳米SiO2吸附在PVAc表面,形成草莓型结构.讨论了纳米二氧化硅溶胶的种类和用量、乳化剂种类对复合微球形态及其膜性能的影响,并讨论了复合微球的形成机理.     

Metal nanoparticle formation in oil media using di(2-ethylhexyl) phosphoric acid (HDEHP)

The metal ion extractant (HDEHP) that is commonly employed in liquid membrane extraction has been shown to stabilise Ag and Cu nanoparticles in oil media of size 5 and 10 nm, respectively. The particle are formed by reduction of the metal salts of HDEHP that are oil soluble and shown by SANS to form small reversed micelles of radius approximately 1 nm. The extractant is also effective at stabilising particles of similar size in an oil phase when the metal ion (e.g., AgNO3) is reduced in a coexisting aqueous phase.     

Transition metal-chelating surfactant micelle templates for facile synthesis of mesoporous silica nanoparticles

Highly ordered mesoporous silica nanoparticles with tunable morphology and pore-size are prepared by the use of a transition metal-chelating surfactant micelle complex using Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions. These metal ions formed a metal-P123 micelle complex in an aqueous solution, while the metal ions are chelated to the hydrophilic domain such as the poly(ethylene oxide) group of a P123 surfactant. The different complexation abilities of the utilized transition metal ions play an important role in determining the formation of nano-sized ordered MSNs due to the different stabilization constant of the metal-P123 complex. Consequently, from a particle length of 1700 nm in the original mesoporous silica materials, the particle length of ordered MSNs through the metal-chelating P123 micelle templates can be reduced to a range of 180–800 nm. Furthermore, the variation of pore size shows a slight change from 8.8 to 6.6 nm. In particular, the Cu²⁺-chelated MSNs show only decreased particle size to 180 nm. The stability constants for the metal-P123 complex are calculated on the basis of molar conductance measurements in order to elucidate the formation mechanism of MSNs by the metal-chelating P123 complex templates. In addition, solid-state ²⁹Si, ¹³C-NMR and ICP-OES measurements are used for quantitative characterization reveal that the utilized metal ions affect only the formation of a metal-P123 complex in a micelle as a template.     

水性体系中超细镍粉的液相还原制备

采用快捷、温和的液相还原法,在水溶液中,以氢氧化钠为pH值调节剂,利用水合肼的还原作用将氯化镍还原得到超细镍粉．利用扫描电镜（SEM）及X射线衍射（XRD）的表征手段研究了反应条件对超细镍粉微观结构的影响．结果表明,所得到的产物是纯的面心立方结构的镍材料,颗粒的尺寸介于200～500nm之间,且分布较为均匀．     

Gram-scale synthesis of silica nanotubes with controlled aspect ratios by templating of nickel-hydrazine complex nanorods

We have developed a robust method for the synthesis of silica nanotubes with controlled aspect ratios on a large scale by templating against rod-like nanocrystals. Crystalline nanorods of a nickel-hydrazine complex are first formed in reverse micelles by surfactant capping on side facets, and subsequent silica coating and selective etching give rise to silica nanotubes of high uniformity and yield. The length of the silica nanotubes is tunable in the range 37-340 nm and can reach as long as micrometers. Control of the length is conveniently achieved by tuning the hydrazine/nickel ratio, which affects the growth kinetics of the nanocrystal templates. The inner diameter of the silica nanotubes can be adjusted in the range 10-20 nm by choosing different surfactants. This method is unique in utilizing reverse micelles as discrete nanoscale reactors for the growth of nanocrystals, allowing for precise control of the features of the nanotubes and opening up new opportunities in the synthesis of novel anisotropic nanomaterials, construction of nanodevices, and potential drug delivery applications.     

Fabrication of Ni nanoparticles by selective oxidation of permalloy thin film during imidization of polyamic acid

Ni nanoparticles embedded in a polyimide (PI) matrix were fabricated by selectively oxidizing a layer of Ni(80)Fe(20) metal film sandwiched between two PI precursor layers. Ni nanoparticles, formed in a monolayer between two PI layers, had an average particle size of approximately 5 nm. X-Ray photoelectron spectroscopy confirmed that Fe in the film was preferentially consumed, resulting in the formation of Ni nanoparticles.     

Encapsulation of silica nanoparticles by miniemulsion polymerization

Hybrid silica/polystyrene nanoparticles were synthesized by miniemulsion polymerization. With the objective to prepare core‐shell hybrid nanoparticles having narrow particle size distributions (PSDs) as well as a high degree of silica encapsulation, the effect of adding surface modifiers, the size of silica nanoparticles, the ratio styrene/silica, the surfactant concentration, and the presence of ethanol in the reaction mixture were studied. A synergistic effect was observed using oleic acid (OA) together with 3‐(trimethoxysilyl)propyl methacrylate (TPM) in the compatibilization step between the organic phase (monomer) and inorganic nanoparticles (silica). Mono and multinuclear eccentric core‐shell hybrid nanoparticles were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 935–948, 2009     

Preparation of crystalline gold nanoparticles at the surface of mixed phosphatidylcholine-ionic surfactant vesicles

The formation of gold nanoparticles and the crystal growth at the surface of mixed phosphatidylcholine (PC)-ionic surfactant vesicles was investigated. The PC-bilayer surface was negatively charged by incorporating sodium dodecyl sulfate (SDS) and positively charged by adding hexadecyltrimethylammonium chloride (CTAB). The mass ratio phosphatidylcholine:surfactant was fixed in both cases at 1:1. The gold nanoparticle formation was studied by using transmission electron microscopy (TEM) combined with dynamic light scattering (DLS) and UV-vis absorption spectroscopy. TEM micrographs confirm that the particle formation occurs on the vesicle surface. However, the reduction process depends on the ionic surfactant incorporated into the vesicles, the vesicle size distribution, as well as the temperature used for the reduction process. Thereby, it becomes possible to control the crystal growth of the individual spherical gold nanoparticles in a characteristic way. Red colored colloidal dispersions consisting of monodisperse spherical nanoparticles with an average particle size between 2 and 8 nm (determined by dynamic light scattering) can be obtained by using a monodisperse SDS-modified vesicle phase. When the temperature is increased to 45 degrees C, a crystallization in rod-like or triangular structures is observed. In the CTAB-based template phase in general larger gold particles of about 35 nm are formed. In similarity to the anionic vesicles a temperature increase leads to the crystallization in triangular structures.     

On the nature of decrease in the particles size of nanostructured nickel oxide obtained by the sol-gel method in the presence of surfactants

A processes of formation of nanostructured powders of nickel oxide by annealing in the temperature range of 200–700°C of the nickel hydroxide obtained by the sol-gel method at 80°C from solutions of nickel nitrate by precipitation with alkali in the presence of surfactant AF-12 (polyethylene oxide alkylphenyl ether) was investigated. The formation of nanostructured powders of nickel oxide in the presence of a surfactant reduces the size of nanoparticles to 20–25 nm, which is 1.5 times smaller than the particles obtained without a surfactant. The effective influence of surfactant on the particle size begins in the temperature range of its decomposition and evaporation equal 350–400°C.