Compatibility study between ibuprofen and excipients in their physical mixtures

The thermal techniques of analysis were used to assess the compatibility between ibuprofen (IB) and some excipients used in the development of extended released formulations. This study is a part of a systematic study undertaken to find and optimizes a general method of detecting the drug–excipient interactions, with the aim of predicting rapidly and assuring the long-term stability of pharmaceutical product and speeding up its marketing. The thermal properties of IB and its physical association as binary mixtures with some common excipients were evaluated by thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry. FT-IR spectroscopy and X-ray powder diffraction (XRPD) were used as complementary techniques to adequately implement and assist in interpretation of the thermal results. Based on their frequent use in preformulations nine different excipients: starch; microcrystalline cellulose (PH 101 and PH 102); colloidal silicon dioxide; lactose (monohydrate and anhydre); polyvinylpyrrolidone; magnesium stearate and talc were blended with IB. The samples were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). The TG/DSC curves of the IB have shown a single stage of mass loss between 175 and 290 °C, respectively, an endothermic peak at 78.5 °C, which corresponds to the melting (literature T _m = 75–78 °C).     

Compatibility study of the acetylsalicylic acid with different solid dosage forms excipients

This study is part of a research project aimed to find and optimize methods by which drug-excipient compatibility can be reliably and quickly assessed. The objective of the present study was to evaluate the compatibility of the acetylsalicylic acid (ASA), an non-steroidal anti-inflammatory drug, with pharmaceutical excipients of common use including diluents, binders, disintegrants, lubricants and solubilising agents. In order to investigate the possible interactions between ASA and eleven excipients differential scanning calorimetry (DSC) and thermogravimetry/derivative thermogravimetry analysis completed by Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction were used for compatibility study. The DSC has proven to be, among the selected analytical techniques, the most sensitive and specific in assessing the compatibility. The samples, as physical mixtures, were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). On the basis of thermal results (especially DSC), confirmed by FT-IR and X-ray analysis, a possible chemical interaction was found between the ASA with polyvinylpyrrolidone K30 (PVP) and magnesium stearate, respectively a possible physical interaction with colloidal silicon dioxide and stearic acid (Ac. St.).     

Compatibility study between indomethacin and excipients in their physical mixtures

Thermal analysis is a routine method for analysis of drugs and substances of pharmaceutical interest. Thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) are thermoanalytical methods which offer important information about the physical and chemical properties of drugs (purity, stability, phase transition, polymorphism, compatibility, kinetic analysis, etc.). This work exemplifies a general method of studying the drug-excipient interactions with the aim of predicting rapidly and inexpensively the long thermal stability of their mixtures. The TG/DTG and DSC were used as screening techniques for assessing the compatibility between indomethacin (IND) and its physical associations as binary mixtures with some common excipients. Based on their frequent use in preformulations eleven different excipients: corn starch, microcrystalline cellulose (PH 101; PH 102), colloidal silicon dioxide, lactose (monohydrate and anhydre), polyvinilpyrrolidone K30, magnesium stearate, talc, stearic acid, and manitol were blended with IND. The samples were prepared by mixing the analyte and excipients in a proportion of 1:1 (w:w). In order to investigate the possible interactions between the components, the thermal curves of IND and each selected excipient were compared with those of their 1:1 (w/w) physical mixtures. FT-IR spectroscopy and X-ray powder diffraction were used as complementary techniques to adequately implement and assist in interpretation of thermal results. On the basis of thermal results, confirmed by FT-IR and X-ray analyses, a possible interaction was found between IND with polyvinylpyrrolidone K30, magnesium stearate, and stearic acid.     

Compatibility study between sitagliptin and pharmaceutical excipients used in solid dosage forms

Differential scanning calorimetry (DSC) is a primary technique for measuring the thermal properties of materials, which reflects the physico-chemical properties of drug substances. In the present study, it is used as a screening technique for assessing the compatibility of sitagliptin with some currently employed pharmaceutical excipients. The influence of processing conditions and their effects (simple blending, co-grinding or kneading) on drug stability was evaluated. Sitagliptin showed a sharp endothermic peak at 212.1 °C with an enthalpy change of 131.5 J g^?1 indicating melting of drug. Facile transformation of dehydrated sitagliptin to monohydrate form was observed in some mixtures, disappearance of sharp melting endothermic peak of sitagliptin was observed in some mixtures. On the basis of DSC results, sitagliptin was found to be compatible with micro crystalline cellulose, croscarmellose, and pregelatinized starch. Some excipient interaction was observed with magnesium stearate, ascorbic acid, and citric acid. X-ray diffractometry and FT-IR were used as supportive tools in interpreting the DSC results. Overall, the excipients selected were compatible with the API and the mixtures are stable within the tested conditions. These results would be useful for formulation development of the film coated tablets of sitaglitptin.     

Compatibility of sildenafil citrate and pharmaceutical excipients by thermal analysis and LC–UV

The evaluation of sildenafil citrate (SC), the best-selling drug for treatment of impotence, for compatibility with various excipients was investigated using thermal and isothermal stress testing. Differential scanning calorimetry (DSC), hot-stage microscopy (HSM) and liquid chromatography (LC) with ultraviolet detection were successfully employed to investigate the compatibility between SC and various excipients commonly used in solid form in the pharmaceutical industry. The studies were performed using 1:1 (m/m) drug/excipient physical mixtures and samples were stored under accelerated stability conditions (40 °C at 75% relative humidity). All excipients tested (such as colloidal silicon dioxide, croscarmellose sodium, lactose, mannitol and sucrose) showed potential incompatibilities by DSC and LC analysis after accelerated stability testing. However, some incompatibilities were not detected by the DSC method and were observed only when LC analysis was performed. HSM was able to differentiate active pharmaceutical ingredient degradation from solubilisation, supporting the interpretation of DSC in excipients where thermal events either overlapped or disappeared. The combination of both the analytical techniques (DSC and LC) and use of a stability chamber is extremely helpful in detecting incompatibilities and providing more robust and accurate approaches for pre-formulation studies.     

Compatibility study of quetiapine fumarate with widely used sustained release excipients

The drug-excipient compatibility study of quetiapine fumarate, with widely used sustained release excipients, was carried out employing differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FT-IR). The selected excipients were HPMC K100M, sodium alginate, xanthan gum, Eudragit RSPO, hydrogenated castor oil, carnauba wax, and PEO WSR 303. Equal proportion of drug and excipients was utilized in the interaction study. FT-IR spectra indicated the absence of interaction between drug and excipients. The DSC curve showed a sharp endothermic melting peak at 173.26 °C for quetiapine fumarate. Post melting interaction was observed for carnauba wax, Eudragit RSPO, and hydrogenated castor oil probably due to solubilization of drug in the melted excipient. No interaction was observed for other excipients. The physical mixtures stored at 30 ± 2 °C/65 ± 5% RH did not show any significant degradation of the drug. The concept of systemically conducted preformulation studies will facilitate dossier submission to the drug control authority.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Pharmaceutical compatibility of dexamethasone with excipients commonly used in solid oral dosage forms

Dexamethasone is a glucocorticoid drug used for the treatment of acute and chronic inflammatory conditions, autoimmune diseases, some cancers, and several other pathologies. It is widely marketed worldwide especially under solid dosage forms. This study aimed to assess its compatibility with solid pharmaceutical excipients. Compatibility study was conducted through the preparation of binary mixtures (1:1, w/w) of dexamethasone with 12 selected excipients. Binary mixtures were analyzed by thermoanalytical techniques (thermogravimetric and differential thermal analysis), Fourier transform infrared spectroscopy, and X-ray diffraction. TG curves pointed only slight anticipations of dexamethasone decomposition. DTA curves showed interactions signs with microcrystalline cellulose 101 and 102, magnesium stearate, mannitol, and polyvinylpyrrolidone. Drug infrared absorption profile was not affected by the mixture with most excipients. X-ray diffractograms of all binary mixtures did not exhibit signs of interactions with changes of dexamethasone crystalline state. These results pointed that the interactions found by DTA technique were probably heat-induced. Therefore, the above-mentioned excipients should be carefully used in solid dosage forms with heat-based manufacturing processes.

     

Application of thermal analysis in study of binary mixtures with metformin

Thermal analysis is an essential analytical tool in development of new formulations as well as to study the interaction between drugs and excipients. This work aims to investigate the possible interactions between metformin and excipients as microcrystalline cellulose (Microcel MC101®), starch sodium glycolate (Explosol®), sodium croscarmellose (Explosel®), PVP K30, magnesium stearate, starch and lactose, usually employed in pharmaceutical products. TG, DSC and DTA techniques were used for the thermal characterization to track if the thermal properties of the drug substance were modified in the mixture. Disregard of the starch and lactose systems, no changes in thermal behavior of mixtures were found. Thermogravimetric studies (TG) of metformin and its binary mixtures showed different thermal behavior.     

Preformulation studies for atorvastatin calcium

This paper deals with the study of compatibility between antihyperlipidemic agent atorvastatin calcium trihydrate (ATV) and eight pharmaceutical excipients used in the development of solid dosage forms, namely citric acid, anhydrous lactose, magnesium citrate, magnesium carbonate, sodium carboxymethyl cellulose, polyvinylpyrrolidone K30, colloidal silica and sorbitol. As investigational tools, universal attenuated total reflectance Fourier transform infrared spectroscopy and powder X-ray diffractogram patterns were used for binary mixtures of ATV with each excipient at ambient condition and then completed by subjecting the samples to thermal stress using thermal analysis (TG/DTG/HF), in non-isothermal conditions and in oxidative medium. It was shown the binary mixtures do not present interactions between ATV and excipients when stored under ambient conditions for 2 months, while under thermal stress, ATV presents interactions with sorbitol.

     

Control release effects of binders used in pills of traditional Chinese medicine herbs

This research investigated the effects of control release of binders that are used in the pills of Chinese herbal medicine, namely, as processed honey, starch paste, beeswax, or mixtures thereof. Aspirin and baicalin were used as the active pharmaceutical ingredients (API). The processed honey was heated to 110 degrees C, 120 degrees C, or 130 degrees C. In these pills, the binders were the only excipients. The pills were prepared by the stir method using a mixer at 80 degrees C without pressure. The differential thermal analysis (DTA) showed that the melting points of aspirin and baicalin were changed by the binders. The Fourier Transform infrared spectra (FT-IR) of aspirin and baicalin suggest that there are different non-covalent molecular interactions between the API and the binders, such as C-H-pi and hydrogen bond interaction. The dissolution profiles indicate that changing the ratio of the binders altered the patterns of dissolution of the API; thus, this ration may be used to control the release of API from the pills.     

DSC Screening of Potential Prochlorperazine-Excipient Interactions in Preformulation Studies

Differential scanning calorimetry was used to examine the thermal behaviour of mixtures of the drug prochlorperazine with standard excipients, to assess potential interactions, and of mixtures with cyclodextrins, to investigate inclusion complexation which could increase the photostability of the drug. For most of the excipients (magnesium stearate, stearic acid, Explotab^®, Ac-Di-Sol^®, Encompress^® and Ludipress^®, lactose and Starch 1500) disappearance or broadening of the melting endotherm of the drug indicated interactions. Lubritab^® was the only 'inert' excipient tested. Mixtures of prochlorperazine and the cyclodextrins gave incomplete inclusion complexation as shown by only partial disappearance of the melting endotherm of the drug.     

Thermal characterization of antimicrobial drug ornidazole and its compatibility in a solid pharmaceutical product

The ornidazole drug substance presents melt at approximately 90 °C (∆T = 85–98 °C), which is critical for its use on pharmaceutical manufacturing process. This work aimed the thermal characterization of ornidazole raw-material synthesized by three different manufacturers from India, China, and Italy, using the thermoanalytical techniques of DTA, DSC, and TG, besides the verification of its stability and compatibility as a solid pharmaceutical product by the analysis of its binary mixtures (BM) with excipients and a tablet formulation. The characterization includes the thermal decomposition kinetic investigation by Ozawa model using Arrhenius equation and drug purity determination by Van’t Hoff equation. The DSC purity determination and precision were compared with results from UV–Vis spectrophotometric and liquid chromatography, showing an adequate correlation before being recommended as a general method for purity assay. The drug raw-materials presented similar quality and zero-order kinetic behavior, besides showing differences on thermal stability. The drug presented compatibility with the tested excipients since the BM studied presented melting at the same temperature range as the drug and a decomposition temperature similar to the drug for two of the BM, and at a higher temperature for the others three of the BM evaluated, which presented excipients with higher molecular structure, capable of spatial coating on the small drug molecule promoting a physical interaction pharmaceutical acceptable. The tablet was processed by wet granulation and compressed under normal conditions of pressure and temperature, maintaining the physical properties of solid drug approving the manufacturing process used. In this study, the thermal analysis was used with success as an alternative method to characterize, quantify, and perform a preformulation study.     

Carvedilol: decomposition kinetics and compatibility with pharmaceutical excipients

Carvedilol (CARVE) is an important cardiovascular drug with limited bioavailability. To improve its therapeutic performance, the investigation of new dosage forms is of great interest due its relevance in clinical applications. Therefore, the aim of this work was to evaluate the stability of CARVE and its drug–excipient compatibility to support its pharmaceutical development. Kinetic analysis under isothermal conditions using thermogravimetry was performed to determine the activation energy of CARVE through an Arrhenius plot. Differential scanning calorimetry, Fourier transform infrared spectroscopy, and optical microscopy were used to test binary mixtures of CARVE and selected excipients. The activation energy of CARVE was 81.2 kJ mol^?1, and from the compatibility studies, all the excipients showed strong thermal interactions, presenting changes in the melting profile of the drug. In addition, analytical assays revealed no physical or chemical changes; because of this, all eight excipients studied are considered compatible and are recommended in formulations containing CARVE. All the evidence together attests to the low chemical reactivity of CARVE and provides useful information for the development of new pharmaceutical formulations containing CARVE.     

Use of DSC and TG for identification and quantification of the dosage form

Thermal analysis techniques, DSC and TG can advantageously be used in quality control of drug products.The methods are commonly used in preformulation for the study of polymorphism and for the study of the interactions drug substance-excipients, since these physical interactions can be the basis of the dosage form performance.For routine control of the drug products, DSC and TG methods which are quick, which require only few mg of the samples and which are automated, are very attractive for routine analysis of drug products. A single scan can give several qualitative and quantitative informations.DSC offer analytical possibilities only if the drug substance and the excipients do not have physical interactions or limited interactions (e.g. eutectic behaviour). About twenty marketed products have been analyzed by DSC and TG. In most of them identification of drug substance is easy. Several excipients could be identified in a tablet. Quantitations are demonstrated for some drug substances and excipients. DSC purity calculations have been applied to acetyl salicylic acid, paracetamol, cimetidine, pindolol, ibuprofen.     

Thermal analysis and compatibility studies of prednicarbate with excipients used in semi solid pharmaceutical form

Differential Scanning Calorimetry (DSC), thermogravimetry/derivative thermogravimetry (TG/DTG) and infrared spectroscopy (IR) techniques were used to investigate the compatibility between prednicarbate and several excipients commonly used in semi solid pharmaceutical form. The thermoanalytical studies of 1:1 (m/m) drug/excipient physical mixtures showed that the beginning of the first thermal decomposition stage of the prednicarbate (T _onset value) was decreased in the presence of stearyl alcohol and glyceryl stearate compared to the drug alone. For the binary mixture of drug/sodium pirrolidone carboxilate the first thermal decomposition stage was not changed, however the DTG peak temperature (T _{peak DTG}) decreased. The comparison of the IR spectra of the drug, the physical mixtures and of the thermally treated samples confirmed the thermal decomposition of prednicarbate. By the comparison of the thermal profiles of 1:1 prednicarbate:excipients mixtures (methylparaben, propylparaben, carbomer 940, acrylate crosspolymer, lactic acid, light liquid paraffin, isopropyl palmitate, myristyl lactate and cetyl alcohol) no interaction was observed.     

Development and validation of chemometrics-assisted spectrophotometry and liquid chromatography methods for the simultaneous determination of the active ingredients in two multicomponent mixtures containing chlorpheniramine maleate and phenylpropanolamine hydrochloride

Multivariate spectrophotometric calibration and liquid chromatography (LC) methods were used for the simultaneous determination of the active ingredients in 2 multicomponent mixtures containing chlorpheniramine maleate and phenylpropanolamine hydrochloride with ibuprofen and caffeine (mixture 1) or with propyphenazone (mixture 2). For the multivariate spectrophotometric calibration methods, principal component regression (PCR) and partial least squares (PLS-1), a calibration set of the mixtures consisting of the components of each mixture was prepared in distilled water. A leave-1-out cross-validation procedure was used to find the optimum numbers of latent variables. Analytical parameters such as sensitivity, selectivity, analytical sensitivity, limit of quantitation, and limit of detection were determined for both PLS-1 and PCR. The LC method depends on the use of a cyanopropyl column with the mobile phase acetonitrile-12 mM ammonium acetate, pH 5.0 (25 + 75, v/v), for mixture 1 or acetonitrile-10 mM potassium dihydrogen phosphate, pH 4.7 (45 + 55, v/v), for mixture 2; the UV detector was set at 212 nm. In spite of the presence of a high degree of spectral overlap of these components, they were rapidly and simultaneously determined with high accuracy and precision, with no interference from the matrix excipients. The proposed methods were successfully applied to the analysis of pharmaceutical formulations and laboratory-prepared mixtures containing the 2 multicomponent combinations.     

Characterization and compatibility study of desloratadine

Desloratadine (DL) is a selective antagonist of the histamine H₁ receptor, which has been widely used to treat allergic symptoms, and stands out from other drugs in this therapeutic class because it does not cause sedative effects. In the present study, the physico-chemical properties of DL were fully characterized using six analytical techniques such as Differential Scanning Calorimetry (DSC), Thermogravimetric analysis (TG/DTG), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, Powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM). The DSC curve shows a sharp endothermic event at 158.4 °C, and the TG/DTG curve presents two decomposition events between 178.4 and 451.9 °C. A compatibility study involving DL and nine pharmaceutical excipients generally used in pharmaceutical formulations was performed. Physical binary mixtures of DL with each excipient were prepared in a 1:1 (w/w) ratio. After preparation, the samples were analyzed immediately and the results reveal solid-state interaction with anhydrous lactose, microcrystalline cellulose, magnesium stearate, and stearic acid.     

Thermal decomposition kinetics and compatibility studies of primaquine under isothermal and non-isothermal conditions

Primaquine (PQ) is the drug of choice for the radical cure of Plasmodium vivax malaria, and currently being administered in solid dosage form. In this study, the compatibility studies were carried out using differential scanning calorimetry (DSC), thermogravimetry (TG), and fourier transformed infrared (FT-IR). Non-isothermal and isothermal methods were employed to investigate kinetic parameters under nitrogen and air atmospheres using TG. The DSC investigations obtained by physical mixtures showed slight alterations in the melting temperatures of PQ with some excipients. The FT-IR confirmed the possible interactions obtained by DSC for the physical mixtures with PQ and lactose, magnesium stearate and mannitol. The results showed that the thermal decomposition followed a zero order kinetic in both atmospheres in non-isothermal method. The activation energy in both methods using nitrogen atmosphere was similar, and in air atmosphere the activation energy decreased.