Enhancement of the photoluminescence and long afterglow properties of Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>:Eu<Superscript>2+</Superscript> phosphor by Dy<Superscript>3+</Superscript> co-doping

The Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ long afterglow phosphors were synthesized under a weak reducing atmosphere by the traditional high temperature solid state reaction method. The synthesized phosphors were characterized by powder X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) techniques. The luminescence properties were investigated using thermoluminescence (TL), photoluminescence (PL), long afterglow, mechanoluminescence (ML), and ML spectra techniques. The crystal structure of sintered phosphors was an akermanite type structure, which belongs to the tetragonal crystallography. TL properties of these phosphors were investigated, and the results were also compared. Under the ultraviolet excitation, the emission spectra of both prepared phosphors were composed of a broad band peaking at 535 nm, belonging to the broad emission band. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co-doped with Dy³⁺, the PL, afterglow and ML intensity is strongly enhanced. The decay graph indicates that both the sintered phosphors contain fast decay and slow decay process. The ML intensities of Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors were proportionally increased with the increase of impact velocity, which suggests that this phosphor can be used as sensors to detect the stress of an object.     

A new phosphor with flower-like structure and luminescent properties of Sr<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript>: Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> long afterglow materials by sol–gel method

The flower-like phosphors of Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ with high brightness and long afterglow were obtained by sol–gel method. X-ray diffraction pattern (XRD) shows that single-phased Sr₂MgSi₂O₇ phosphor is prepared by sol–gel method under 1250 °C. Scanning electron microscope (SEM) indicates that the phosphor consists of nano-sized whiskers which are detected for the first time in Eu²⁺ and Dy³⁺ co-doped long-lasting phosphorescence silicates. Furthermore, the investigation on the mechanism indicates that the internal structure and gas, liquid and solid phase effect play important roles in the formation of flower-like Sr₂MgSi₂O₇: Eu²⁺, Dy³⁺ nanostructure. Finally, the optical properties of flower-like Sr₂MgSi₂O₇ nanostructure have been characterized by photoluminescence (PL) spectra.     

Effects of boric acid on structural and luminescent properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:(Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript>) phosphors

Eu²⁺/Dy³⁺-codoped BaAl₂O₄ phosphors were prepared by conventional solid-state reaction with boric acid flux. The effects of boric acid on structural and luminescent properties of BaAl₂O₄:(Eu²⁺, Dy³⁺) were investigated. The crystallinity of BaAl₂O₄ improved with increasing amount of H₃BO₃. Incorporation of Eu²⁺ and Dy³⁺ ions into effective lattice sites was promoted by H₃BO₃ addition. As a result, Eu²⁺ emission in BaAl₂O₄ was greatly enhanced by H₃BO₃, and the duration of persistent luminescence increased with the amount of H₃BO₃. However, the decay lifetime of persistent luminescence was not strongly influenced by the amount of H₃BO₃.     

Photocatalysis enhancement of CaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Nd<Superscript>3+</Superscript>@TiO<Subscript>2</Subscript> composite powders

CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were synthesized by a sol–gel method under mild conditions (i.e. low temperature and ambient pressure). The as-prepared powders were characterized by transmission electron microscopy (TEM) and analyzed by X-ray diffraction (XRD). The photocatalytic behavior of the TiO₂-base surfaces was evaluated by the degradation of nitrogen monoxide gas. It suggested that CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders were composed of anatase titania and that CaAl₂O₄:Eu²⁺, Nd³⁺. TiO₂ particles were deposited on the surface of CaAl₂O₄:Eu²⁺, Nd³⁺ to form uniform film. CaAl₂O₄:Eu²⁺, Nd³⁺@TiO₂ composite powders exhibited higher photocatalytic activity compared with pure TiO₂ under visible light. And the result also clearly indicated that the long afterglow phosphor absorbed and stored lights for the TiO₂ to remain photocatalytic activity in the dark.     

Synthesis and characterization of Eu<Superscript>3+</Superscript> doped Lu<Subscript>2</Subscript>O<Subscript>3</Subscript> nanophosphor using a solution-combustion method

Fine Eu³⁺-doped lutetium oxide (Lu₂O₃:Eu³⁺) nanophosphor were synthesized using a low-temperature solution-combustion method in a methyl-alcohol solution. The characteristics of the nanophosphors synthesized at various sintering temperatures with different Eu³⁺ concentrations were analyzed to determine the optimum synthesis conditions. Thermogravimetry/differential thermal analysis showed that Lu₂O₃:Eu³⁺ crystallizes completely when the dry powder is sintered at 500 °C. The Lu₂O₃:Eu³⁺ crystals had a cubic structure and monoclinic phase. The peak position of the luminescence spectrum did not differ with the concentration of Eu or the sintering temperature or atmosphere, whereas the luminescence intensity was strongly dependent on the concentration and sintering conditions.     

Eu<Superscript>3+</Superscript>-fluorescence properties in nano-crystallized SnO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

Fluorescence and spectral hole burning properties of Eu³⁺ ions were studied in nanocrystals-precipitated SnO₂-SiO₂ glasses. The glasses were prepared to contain various amount of Eu₂O₃ using the sol-gel method, in which SnO₂ nanocrystals were precipitated by heating in air. In the glasses containing Eu₂O₃ less than 1%, the Eu³⁺ ions were preferentially doped in the SnO₂ nanocrystals and their fluorescence intensities were enhanced by the energy transfer due to the recombination of electrons and holes excited in SnO₂ crystals. The SnO₂ nanocrystals-precipitated glasses exhibited the persistent spectral holes with the depth of ∼25% of the total fluorescence intensities of the Eu³⁺ ions. With the increasing Eu₂O₃ concentration, the amount of SnO₂ nanocrystals decreased and the Sn⁴⁺ ions formed the random glass structure together with the silica network. This structure change induced the fluorescence intensities and the hole depth to decrease.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.     

Study on the PSL mechanism in BaFCl:Eu<Superscript>2+</Superscript> phosphors

In this paper, the ESR and photoluminescence (PL) of BaFCl and BaFCl:Eu²⁺ radiated or un-radiated by X-ray were observed. The single electron in the color center could be produced in BaFCl without Eu²⁺. A series of traps of different energy level in BaFCl lattice were formed, and some shallow traps of them could be bleached by Vis-light, and the other deep traps could not. The bleaching effects on ESR and photostimulated luminescence (PSL) were investigated. An F-H-Eu²⁺ complex (F color center, H color center and Eu²⁺ complex) in the lattice of BaFCl:Eu²⁺ was suggested when the phosphor was X-ray irradiated. The Eu²⁺ located in the complex has only contribution to the ESR signal, but has no contribution to PL spectrum. The excitation of both F-center and located Eu²⁺ could decompose the complex to induce bleaching. The 440 nm light could excite the F-centers and the 220 nm and 270 nm could excite the located Eu²⁺, and the excitation disturbed the F-H-Eu²⁺ complex and caused a decrease of the PSL.     

Valence and environment of rare earth ions in CaAl2O4:Eu,R persistent luminescence materials

The existence of the different R²⁺/R³⁺/R^IV (R: rare earth) ions as well as the modifications in the structural environment around the dopant and co-dopants in CaAl₂O₄:Eu²⁺,R³⁺ persistent luminescence materials was studied by L_III edge X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) measurements at Hamburger Synchrotronstrahlungslabor (HASYLAB) at Deutsches Elektronen-Synchrotron (DESY) (Hamburg, Germany). The measurements were carried out at 10 and 296 K for selected rare earth (co-)dopants (Eu²⁺; Ce³⁺, Nd³⁺, Sm³⁺, and Yb³⁺).     

UV excited green luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, Dy<Superscript>3+</Superscript> nanophosphor

Eu, Dy co-doped strontium aluminate nanophosphors were prepared by the combustion synthesis method. Their structure and morphology were investigated by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy. According to the XRD and the TEM analysis, the average crystallite size was found to be in the nanometer range. The phase structure of the prepared nanophosphor is consistent with a standard monoclinic phase with a space group P2₁. The prepared SrAl₂O₄:Eu²⁺, Dy³⁺ nanophosphor emitted green light with a peak at 510 nm showing blue shift, which is due to the reduction in the particle size. Two distinct peaks were observed in the ML intensity versus time curve. The two peaks in ML indicate the presence of charge transfer in an ML process.     

Effect of Sr2+ doping on the luminescence properties of YVO4:Eu3+,Sr2+ particles prepared by a solvothermal method

Well-dispersed Eu³⁺ and Sr²⁺ co-doped YVO₄ luminescent particles (YVO₄:Eu³⁺,Sr²⁺) on the submicron scale were prepared by a facile solvothermal method at low temperature. The effect of Sr²⁺ doping on the luminescence of YVO₄:Eu³⁺,Sr²⁺ particles was investigated by fixing the Eu³⁺ doping concentration at 7 mol%. It was found that the luminescence intensity of the as-prepared YVO₄:Eu³⁺,Sr²⁺ particles increased with the Sr²⁺ doping concentration x to reach a two-fold enhancement when x = 5 %, and then decreased for higher x. We also investigated the effect of thermal annealing on the luminescence properties of the YVO₄:Eu³⁺ and YVO₄:Eu³⁺,Sr²⁺ particles. A remarkable enhancement in their luminescence properties was observed after annealing at 900 °C in air for 30 min. It was showed that the annealed YVO₄:Eu³⁺,Sr²⁺ particles exhibited a two-fold stronger emission than the annealed YVO₄:Eu³⁺. This work indicates that Sr²⁺ doping is beneficial to the luminescence enhancement for both the as-prepared and annealed YVO₄:Eu³⁺,Sr²⁺ particles.     

Enhancing the Photocatalytic Activity of Sr4Al14O25: Eu2+, Dy3+ Persistent Phosphors by Codoping with Bi3+ Ions

The photocatalytic activity of Bismuth‐codoped Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺ persistent phosphors is studied by monitoring the degradation of the blue methylene dye UV light irradiation. Powder phosphors are obtained by a combustion synthesis method and a postannealing process in reductive atmosphere. The XRD patterns show a single orthorhombic phase Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺, Bi³⁺ phosphors even at high Bismuth dopant concentrations of 12 mol%, suggesting that Bi ions are well incorporated into the host lattice. SEM micrographs show irregular micrograins with sizes in the range of 0.5–20 μm. The samples present an intense greenish‐blue fluorescence and persistent emissions at 495 nm, attributed to the 5d–4f allowed transitions of Eu²⁺. The fluorescence decreases as Bi concentration increases; that suggest bismuth‐induced traps formation that in turn quench the luminescence. The photocatalytic evaluation of the powders was studied under both 365 nm UV and solar irradiations. Sample with 12 mol% of Bi presented the best MB degradation activity; 310 min of solar irradiation allow 100% MB degradation, whereas only 62.49% MB degradation is achieved under UV irradiation. Our results suggest that codoping the persistent phosphors with Bi³⁺ can be an alternative to enhance their photocatalytic activity.     

Near-infrared quantum cutting in Tb<Superscript>3+</Superscript> and Yb<Superscript>3+</Superscript>-doped Y<Subscript>2</Subscript>O<Subscript>3</Subscript> nanophosphors

Properties of the quantum-cutting phosphors are dependent on various factors such as dopant concentration, crystallinity, homogeneity, particle size and surface morphology. Effective control of the above parameters can enhance the quantum-cutting ability of the phosphor material. Nano-sized particles of Y₂O₃:Tb³⁺,Yb³⁺ were prepared with a solution-based co-precipitation method and subsequent calcination. Effective control of the reaction parameters and doping concentration helped to produce uniform nanostructures with high quantum-cutting efficiency up to 181.1 %. The energy transfer mechanism between Tb³⁺ and Yb³⁺ was studied by considering their spectroscopic properties and time-resolved spectroscopy. The high efficiency and small particle size of the quantum-cutting phosphor Y₂O₃:Tb³⁺,Yb³⁺ make it a suitable candidate for its application in solar cells.     

Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Preparation and Characterization of GdTaO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> Sol-Gel Luminescence Thin Films

High quality GdTaO₄:Eu³⁺ luminescence films have been successfully prepared through a modified sol-gel process. The films were prepared using inorganic materials as raw materials, and the thermal decomposition and UV assisted technique were introduced to improve the quality of the film and reduce the period for forming the thick film. Results of structural studies by atomic force microscopy (AFM) and X-ray diffraction (XRD) showed that the surface was smooth and the structure was monoclinic with the average grain size of about 55 nm. The emission and excitation spectra of the film were investigated. Related to the transition ⁵ D₀ →⁷ F₁ and ⁵ D₀→⁷ F₂ of Eu³⁺ ions, the main luminescence peaks were observed at 591 and 611 nm respectively, and the luminescence peak at 345 nm was detected simultaneously related to the TaO₄³⁻ emission. Transmission spectrum and decay curve of the luminescence are also presented in this paper.     

Incorporation of Mg<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, Ba<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> into aragonite and comparison with calcite

We have investigated the presence of foreign ions into the bulk structure and the external surfaces of aragonite using periodic ab-initio methods. Four cations isovalent to Ca²⁺ were studied: Mg²⁺, Sr²⁺, Ba²⁺ and Zn²⁺. The calculations were performed at structures (bulk, surface) that contain four and eight CaCO₃ units. Our results, at the Hartree-Fock level, show that the incorporation of those ions into aragonite depends strongly on their size. Mg²⁺ and Zn²⁺, due to their smaller size, can substitute Ca²⁺ ions in the crystal lattice while the incorporation of Sr²⁺ and Ba²⁺ into aragonite is energetically less favoured. Examination of the [011], [110] and [001] surfaces of aragonite revealed that the surface incorporation reduces the energetic cost for the larger ions. These systems provide challenging examples for most shape analysis methods applied in Mathematical Chemistry.     

Hexametavanadates M<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>M<Superscript>2+</Superscript>(VO<Subscript>3</Subscript>)<Subscript>6</Subscript>: Thermal stability and luminescent characteristics

Rhombohedral hexametavanadates K₄Sr(VO₃)₆, K₄Ba(VO₃)₆, Rb₄ Ba(VO₃)₆, and Cs₄Ba(VO₃)₆ melt incongruently in the temperature range of 491 to 600°C. Cooling of peritectic melts yields mixtures of compounds typical of M₂⁺O-M²⁺O-V₂O₅ systems, far from equilibrium and depending on the cooling kinetics. The vanadate Cs₄Ba(VO₃)₆ undergoes reversible polymorphic transformation at 360°C. All compounds show broad-band luminescence with a maximum of the luminescence spectrum at 490–590 nm with three types of excitation. The vanadates K₄Sr(VO₃)₆ and Rb₄Ba(VO₃)₆ show the highest luminescence intensity at room temperature. The latter is also most efficient at liquid nitrogen temperatures. The luminescence spectra depend on the excitation of vanadates. Three hypotheses were put forward to interpret this finding. The nature of luminescence is attributed to the relaxation of electronic excitation in [VO₄]³⁻ structural tetrahedra present in the vanadates. The performance characteristics of luminophores were determined. These luminophores may be promising as X-ray luminescent screens, radioluminescence indicators, and light-emitting diode devices.     

Kinetics and thermoluminescence glow curve study of Ba2MgSi2O7:Eu3+, Dy3+

This paper reports thermoluminescence glow curves of Eu³⁺, Dy³⁺-doped Ba₂MgSi₂O₇ phosphor for different UV exposure times. Kinetic data were evaluated by the peak-shape method. The glow curves shift toward higher intensity with increasing exposure time to UV at 365 nm. When the heating rate was 5 °C s^?1, peaks were observed at 101.76, 109.69, 102.67, and 104.05 °C, respectively, after UV exposure for 5, 10, 15, and 20 min. The glow peaks are indicative of second-order kinetics. Different kinetic data, i.e. trap depth, order of kinetics, activation energy, and frequency factor were also calculated. To evaluate the persistence characteristics of the luminescence of the phosphor, the lifetime of the charge in the trap was calculated; it was 348, 660, 368, and 428 s for UV exposure of 5, 10, 15, and 20 min, which indicates the luminescence of the phosphor is persistent.     

Kinetic aspects of the ion-exchange reactions of Cs<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, Sr<Superscript>2+</Superscript>and Eu<Superscript>2+</Superscript> ions on the H<Superscript>+</Superscript> form of chromium hexacyanoferrate(II)

Summary This paper reports the radiochemical study of the ion-exchange of Cs⁺, Na⁺, Sr²⁺ and Eu³⁺ ions with H⁺ by chromium hexacyanoferrate(II) which was prepared in a granular form using a gel method. The slow steps which determine the rate of exchange of these ions are directly proportional to the particle diameter and this is confirmed from the linearity test of Bt vs. t plots at different particle diameters. Boyed’s equation and Reichenberg’s tables were used for evaluating all the kinetic parameters. The results reveal that the effective particle radii are unchanged for both chromium hexacyanoferrate(II) dried at 60 and 120 °C. The obtained data were analyzed using McKay plots and Arrhenius equation and the kinetic and thermodynamic parameters, e.g., effective diffusion coefficient, activation energies and entropies of activation have been evaluated. The mobility of these ions inside the particles of chromium hexacyanoferrate(II) decrease in the order of Eu³⁺>Sr²⁺>Na⁺⊃Cs⁺.     

Crystal structure of a new ternary molybdate in the Rb<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-Eu<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>-Hf(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> system

A ternary salt system Rb₂MoO₄-Eu₂(MoO₄)₃-Hf(MoO₄)₂ was studied in the subsolidus area by X-ray phase analysis. A novel ternary molybdate, Rb_4.98Eu_0.86Hf_1.11(MoO₄)₆, formed in the system. The Rb_4.98Eu_0.86Hf_1.11(MoO₄)₆ rubidium-europium-hafnium molybdate crystals were grown by solution-melt crystallization under the spontaneous nucleation conditions. The structure and composition of this compound were refined by single crystal X-ray diffraction (X8 APEX automated diffractometer, MoK _α radiation, 1753 F(hkl), R = 0.0183). The crystals are trigonal, a = b = 10.7264(1) Å, c = 38.6130(8) Å, V = 3847.44(9) ų, Z = 6, space group R \(\bar 3\) c. The three-dimensional mixed framework of the structure comprises Mo tetrahedra and two types of octahedra, (Eu,Hf)O₆ and HfO₆. The large cavities of the framework include two types of the rubidium atom. The distribution of the Eu³⁺ and Hf⁴⁺ cations over two crystallographic positions was refined.