Cationic grafting from carbon black. VIII. Cationic ring-opening polymerization and copolymerization of oxepane initiated by acylium perchlorate groups on carbon black

The cationic ring-opening polymerization of oxepane was found to be initiated by carbon black having acylium perchlorate (CO⁺CIO) groups, which were introduced by the reaction of acyl chloride groups with silver perchlorate. It was confirmed that polyoxepane, i.e., poly(oxyhexamethylene), was propagated from CO⁺CIO groups on carbon black and effectively grafted on the surface. The rate of the polymerization and the percentage of grafting of poly(oxyhexamethylene) remarkably increased by the addition of epichlorohydrin (ECH) as a promoter: the percentage of grafting in the presence of ECH increased to about 100% with an increase in conversion. Furthermore, CO⁺CIO groups on carbon black have an ability to initiate the cationic ring-opening copolymerization of oxepane with ECH to give poly(oxepane-co-ECH) with various composition. The ring-opening copolymerization of oxepane with phthalic anhydride was also initiated by CO⁺CIO groups to give polyether ester, i.e., poly(hexamethylene phthalate) containing poly(oxyhexamethylene) sequence. In the copolymerization, polyether or polyether ester was effectively grafted from carbon black based on the propagation of these polymers from CO⁺CIO groups.     

Cationic grafting from carbon black. II. Polymerization of styrene initiated by CO+ClO group on the surface of carbon black

The cationic grafting of polystyrene initiated by carbon black containing the CO⁺ClO group was investigated. The introduction of CO⁺ClO groups onto a carbon black surface was achieved by the reaction of AgClO₄ with carbon black that contained a COCI group. The latter was introduced by the reaction of carboxyl groups with SOCl₂. It was found that polystyrene chains could be grown from CO⁺ClO groups on the surface of carbon black. Moreover, polystyrene was effectively grafted from carbon black: the grafting ratio at 20°C increased to 58% as conversion increased. Furthermore, the grafting ratio and molecular weight of ungrafted polystyrene decreased with an increase in polymerization temperature. These results were explained by the fact that the increasing temperature of the polymerization caused an increase in the rate of chain transfer reaction of the growing polymer chain to the monomer. The carbon black obtained from the reaction produced a stable colloidal dispersion in a good solvent for polystyrene.     

Living cationic polymerization of isobutyl vinyl ether by the carboxyl group of the carbon black/zinc chloride initiating system

The effect of zinc chloride (ZnCl₂) on the cationic polymerization of isobutyl vinyl ether (IBVE) initiated by carboxyl groups on a carbon black surface was investigated. Although the polymerization of IBVE was initiated by carboxyl groups on the surface, the rate of polymerization was small and the molecular weight distribution (MWD) of poly IBVE was very broad. The rate of the polymerization was found to be drastically increased, and 100% monomer conversion was achieved in a short time by the addition of ZnCl₂. The number-average molecular weights (M_n) of the polyIBVE were directly proportional to monomer conversion in the polymerization initiated by the carbon black/ZnCl₂ system. By addition of the monomer at the end of the first-stage polymerization, the added monomer was smoothly polymerized at the same rate as in the first stage. The M_n of the polymer was in excellent agreement with the calculated value, assuming the polyIBVE chain forms per unit carboxyl group on the surface and MWD was narrow (M_w/M_n = 1.2 ～ 1.3). Based on the results, it is concluded that carbon black/ZnCl₂ system has an ability to initiate the living cationic polymerization of IBVE. Furthermore, it was found that polyIBVE was grafted onto the carbon black surface after the quenching of the living polymer with methanol. © 1995 John Wiley & Sons, Inc.     

Radiation-induced postpolymerization of trioxane in the solid state. IV. Copolymerization of trioxane with dioxolane

The radiation-induced postpolymerization of trioxane with 1,3-dioxolane has been investigated. Trioxane and 1,3-dioxolane were carefully purified in a rigorously dry, high-vacuum system. In the present study it was found that trioxane can be easily copolymerized with 1,3-dioxolane to give a copolymer having high molecular weight and excellent thermal stability. Typically, the isothermal weight loss after heating for 60 minutes under nitrogen at 222°C was 3.5% for a copolymer of trioxane and 1.0 wt-%1,3-dioxolane preirradiated with a dose of 1.0 × 10⁵ Rad. The thermal stability of the copolymer was scarcely affected by the polymerization temperature and time, although it decreased slightly with increasing preirradiation dose. The dependences of the yield and inherent viscosity of the polymer on the preirradiation dosage, polymerization temperature and time were quite similar to those found for the homopolymerization of trioxane. The results were analyzed by using the kinetic scheme previously reported, and it was found that no chain transfer reaction occurs in this system. These results are discussed in comparison with those of homopolymerization reported previously.     

Cationic ring-opening transfer polymerization of spiro ortho esters initiated by carbon black

The ring-opening transfer polymerization of spiro ortho esters (SOE) initiated by carbon black was investigated. In the absence of carbon black, no polymerization occurred at all. In the presence of channel black containing carboxyl group, the ring-opening transfer polymerization of SOE was initiated at 50-70°C. to give polyether ester, namely alternating copolymer of epoxide and lactone. The rate of polymerization of 1,4,6-trioxaspiro[4.4]nonane and 1,4,6-trioxaspiro[4.5]decane was considerably small compared with that of 1,4,6-trioxaspiro[4.6]undecane. The activation energy of the polymerization of 2-chloromethyl-1,4,6-trioxaspiro[4.6]undecane was estimated to be 6.0 kcal/mol. The initiating activity of carbon black increased with an increase in carboxyl group content of carbon black. Furnace black that contained no carboxyl group was unable to initiate the polymerization. Furthermore, the carbon black lost the initiating ability of the polymerization upon the blocking of carboxyl group on the surface by the treatment with potassium hydroxide or diazomethane. Based on these results, it was concluded that carboxyl group on carbon black plays an important role in the initiation. During the polymerization, a part of the polymer formed was grafted onto carbon black: the grafting ratio was 10–30%. The mechanisms of initiation and grafting were discussed.     

Grafting polyesters onto carbon black. I. Polymerization of β-propiolactone initiated by alkali metal carboxylate group on the surface of carbon black

By use of carbon black that contained alkali metal carboxylate (? COOM; M?Li, Na, K, Rb, or Cs) group as catalyst the anionic polymerization of β-propiolactone (PL) was carried out at 50°C and the grafting of polyester onto the carbon black surface was investigated. Carbon black that contained ? COOM group was prepared by the reaction of carboxyl group on the surface with corresponding alkali metal hydroxide and was able to initiate the anionic ring-opening polymerization of PL. The carbon black obtained from the reaction gave a stable colloidal dispersion in an organic solvent. It was confirmed that the polyester formed was grafted effectively onto the surface; for instance, by using carbon black that contained ? COOK group as catalyst the grafting ratio was increased to 145% (viz., 1.45 g of polyester was grafted/1 g of carbon black) with an increase in conversion. Furthermore, the effect of alkali metal countercation (M⁺) on the polymerization was studied. The initiating activity of ? COOM group on the surface increased in the following order: ? COOLi < ? COONa < ? COOK < ? COORb < ? COOCs. This order was in agreement with that of increasing electropositivity of these alkali metals.     

Radical polymerization of methyl methacrylate initiated by an enolizable ketone–carbon black system

The polymerization of methyl methacrylate (MMA) initiated by an enolizable ketone (R₁? CO? CH₂? CO? R₂)-carbon black system was investigated. Although enolizable ketone itself could not do so, the polymerization of MMA was initiated by enolizable ketone in the presence of carbon black. In addition, a chloranil-enolizable ketone system was able to initiate the polymerization of MMA. It was found that the enol form of the ketone and quinonic oxygen groups on the carbon black surface played an important role in the initiation system; namely, it was considered that the polymerization was begun by the ketone radical (R₁? CO? CH? CO? R₂) formed by a one-electron transfer reaction from enolate ion to quinonic oxygen groups. The effect of solvent on the process was also studied. The rate of the polymerization increased, depending on the solvent used, in the following order: benzene < 1,4-dioxane < dimethyl sulfoxide < N,N-dimethylformamide < N-methyl-2-pyrrolidone. Furthermore, it became apparent that during the polymerization poly(methyl methacrylate) was grafted onto the carbon black surface (grafting ratio was ca. 40% when benzene was used as solvent) and the carbon black obtained gave a stable colloidal dispersion in organic solvent.     

THE EFFECTS OF MONOMER STRUCTURE OF CYCLIC KETENE ACETALS ON THE BEHAVIOR OF CONTROLLED RADICAL RING-OPENING POLYMERIZATION

Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4-phenyl-1,3-dioxolane (MPDO) and 4, 7-dimethyl-2-methylene-1, 3-dioxepane(DMMDO) were carried out in the presence ofethyl α-bromobutyrate/CuBr/2, 2'-bipyridine respectively. The structures of poly(BMDO), poly(MPDO) and poly(DMMDO)were characterized by ~1H and ~(13)C-NMR spectra. The effects of monomer structure on the behavior of atom transfer freeradical ring-opening polymerization were investigated and the mechanism of controlled free radical ring-openingpolymerization was discussed.     

Preparation of polymer‐grafted carbon black nanoparticles by surface‐initiated atom transfer radical polymerization

Pristine carbon black was oxidized with nitric acid to produce carboxyl group, and then the carboxyl group was consecutively treated with thionyl chloride and glycol to introduce hydroxyl group. The hydroxyl group on the carbon black surface was reacted with 2‐bromo‐2‐methylpropionyl bromide to anchor atom transfer radical polymerization (ATRP) initiator. The ATRP initiator on carbon black surface was verified by TGA, FTIR, EDS, and elemental analysis. Then, poly (methyl methacrylate) and polystyrene chains were respectively, grown from carbon black surface by surface‐initiated atom transfer radical polymerization (SI‐ATRP) using CuCl/2,2‐dipyridyl (bpy) as the catalyst/ligand combination at 110 °C in anisole. ¹H NMR, TGA, TEM, AFM, DSC, and DLS were used to systemically characterize the polymer‐grafted carbon black nanoparticles. Dispersion experiments showed that the grafted carbon black nanoparticles had good solubilities in organic solvents such as THF, chloroform, dichloromethane, DMF, etc. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3451–3459, 2007     

Grafting of polyesters onto carbon black. VI. Copolymerization of alkylene carbonate with cyclic acid anhydride initiated by alkali metal carboxylate groups on carbon black surface

The ring-opening copolymerization of alkylene carbonate with cyclic acid anhydride was found to be initiated by carbon black containing potassium carboxylate (COOK) groups to give an alternating polymer, i.e., polyester. The polyester was propagated from COOK groups and effectively grafted from carbon black surface: e.g., the grafting ratio of polyester from ethylene carbonate (EC) and phthalic anhydride (PAn) went up to over 100%. On the other hand, the initiating activity of alkali metal carboxylate groups increased, depending on the alkali metal countercation, in the following order: COOLi < COONa < COOK < COORb < COOCs. This order was in agreement with that of increasing electropositivity of the counteraction. The activation energy of the copolymerization of EC with PAn was determined to be 26.3 kcal/mol. The rate of the copolymerization was accelerated in an aprotic solvent such as N-methyl-2-pyrrolidone. Furthermore, the effect of solvent and polymerization temperature on the grafting ratio of polyester was investigated.     

Polymer grafting onto carbon black by use of TEMPO-terminated polystyrene with controlled molecular weight

The grafting of polystyrene with controlled molecular weight and narrow molecular weight distribution onto the carbon black surface through the trapping of polymer radicals formed by the thermal dissociation of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO)-terminated polystyrene (PSt-TEMPO) by the carbon black surface was investigated. PSt-TEMPO was prepared by living radical polymerization of St with the benzoyl peroxide/TEMPO system. When PSt having no terminal TEMPO moiety was heated with carbon black, no grafting of PSt onto the surface was observed. On the contrary, by the heating of PSt-TEMPO with carbon black in m-xylene at 125°C, PSt with controlled molecular weight and narrow molecular weight distribution was grafted onto the surface: the percentage grafting of PSt (M_n = 3.2 × 10³;M_w/M_n = 1.07) onto furnace black was determined to be 16.0%. On the basis of the above results, it is concluded that PSt radicals formed by the thermal dissociation of the C ON bond between PSt and TEMPO are trapped by polycondensed aromatic rings of carbon black. The mole number of grafted PSt chains on the carbon black surface decreased with increasing molecular weight of PSt-TEMPO. PSt-grafted carbon black gave a stable colloidal dispersion in THF. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3165–3172, 1998     

ATRP of butyl acrylates from functionalized carbon black surfaces

The functionalization of carbon black surface with atom transfer radical polymerization (ATRP) initiating sites and subsequent ATRP of n‐butyl acrylate (n‐BA) and t‐butyl acrylate (t‐BA) from the surface of carbon black is reported. The polymerizations were carried out using CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the primary catalytic system in anisole at 70 °C. The initiator density on carbon black surface was tuned and the effect of initiator density on the polymers grafted on the surface was illustrated. Polymerizations were also performed in the presence of a sacrificial initiator to indirectly monitor the molecular weight evolution of polymers formed in the system. Block copolymerization of t‐BA initiated from poly(n‐BA) grafted carbon black was conducted to achieve water‐dispersible carbon black composites after cleavage of the t‐butyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4695–4709, 2005     

Copolymerization of trioxane by γ-radiation

High molecular copolymers of trioxane with different cyclic ethers and formals were produced by γ-radiation from a ⁶⁰Co source. It was polymerized in the solid state at 53°C. Polymerization does not occur in the melt. Irradiation was carried out with exclusion of air at a dose rate of 7 × 10³ rad/hr. The polymerization rate was increased very considerably in the presence of 1,3-dioxolane and epichlorhydrin; the addition of other comonomers may reduce the yield. The concentration of the comonomer is generally higher in the polymer than in the initial mix. These comonomers which increase the polymerization rate are introduced preferentially into the polymer chain; this is proved by the unstable polymer part and the thermal stability. Experiments with the trioxane–1,3-dioxolane system revealed that the unstable polymer part is markedly reduced and the heat stability considerably inproved with rising concentrations of this monomer. The thermal stability and the reduced viscosity of these copolymers are within the range of technical processability.     

Grafting onto carbon black by the reaction of reactive carbon black having masked isocyanate or acyl azide group with functional polymers

Although isocyanate group (NCO) introduced onto carbon black surface was inactivated rapidly upon storage, it could be stabilized by masking the NCO group with active hydrogen compounds such as acetylacetone, diethyl malonate, and sodium hydrogensulfite. Upon heating these carbon blacks having masked NCO group at 150°C, the NCO group was regenerated on carbon black by the decomposition of the masked NCO group. On the other hand, acyl azide (CON₃) group introduced onto carbon black was stable at below 20°C, but readily decomposed to NCO group by heating. By means of the reaction of NCO group on carbon black with functional polymers having hydroxyl, amino, and carboxyl group, these polymers were effectively grafted onto carbon black surface. When carbon black having CON₃ group was used as reactive carbon black, the grafting ratio of diol-type polyethylene glycol (M_n = 8.2 × 10³), polyethyleneimine (M_n = 2.0 × 10⁴), polyvinyl alcohol (M_n = 2.2 × 10⁴), and bifunctional carboxyl-terminated polystyrene (M_n = 1.1 × 10⁵) was determined to be 29.7, 81.7, 32.2, and 50.4%, respectively. The number of grafted polymer chain decreases with an increase in molecular weight of the polymers, because the shielding effect of NCO group by grafted polymer chain is enhanced with an increase in molecular weight of the polymer.     

Preparation and radical ring-opening polymerization of 2-substituted-4-methylene-1,3-dioxolanes

2-Methyl-2-phenyl-4-methylene-1,3-dioxolane ( IIa ), 2-ethyl-2-phenyl-4-methylene-1,3-dioxolane ( IIb ), 2-phenyl-2-(n-propyl)-4-methylene-1,3-dioxolane ( IIc ), 2-phenyl-2-(i-propyl)-4-methylene-1,3-dioxolane ( IId ), 2-(n-heptyl)-2-phenyl-4-methylene-1,3-dioxolane ( IIe ), 2-methyl-2-(2-naphthyl)-4-methylene-1,3-dioxolane ( IIf ), and 2,2-diphenyl-4-methylene-1,3-dioxolane ( IIg ) were prepared and polymerized in the presence of a radical initiator. IIa–IIf were found to undergo vinyl polymerization with ring-opening reaction accompanying the elimination of ketone groups in bulk. IIg was found to undergo the quantitative ring-opening reaction accompanying the elimination of benzophenone in solution to obtain polyketone without any side reaction.     

Cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane

Preparation and cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane ( VI ) was performed. Unsaturated cyclic acetal VI was prepared by dehydrochlorination of 2-isopropenyl-4-chloromethyl-1,3-dioxolane, which was easily obtained from methacrolein and epichlorohydrin, with sodium methoxide at ambient temperature. The cationic polymerization of VI with BF₃OEt₂ or CF₃SO₃H at ?78°C afforded only crosslinked polymers, whereas the polymerization by CH₃SO₃H gave soluble poly(keto-ether) which consisted of units VII containing an isopropenyl group in the side chain and units VIII containing a carbon-carbon double bond in the main chain. The reaction of VI with ethanethiol in the presence of protic acid was also carried out as a model reaction of the polymerization. The reaction initiated by the addition of proton to the 4-methylene group of VI , and quantitative ring-opening isomerization followed by the addition of ethanethiol afforded acyclic ketone IX and X . On the basis of the model reaction, the polymerization mechanism is also discussed. © 1993 John Wiley & Sons, Inc.     

Surface initiated ring-opening polymerization of l-proline N-carboxy anhydride from single and multi walled carbon nanotubes

Ring-opening surface initiated polymerization of l-proline N-carboxyanhydride was performed from amine functionalized single (SWNTs) and multi walled carbon nanotubes (MWNTs). The primary amines were grafted on the surfaces via a well-studied Diels–Alder cycloaddition. The initiator attachment helped the debundling of carbon nanotubes as shown by atomic force microscopy (AFM) studies where only small aggregates were observed. Thermogravimetric analysis revealed high wt% of grafted polyproline on the carbon nanotubes surface after the ring-opening polymerization. AFM studies showed a rather uniform layer of grafted polyproline from both MWNTs and SWNTs. The grafting of PLP on the surface was also verified by FTIR and Raman spectroscopy as well as ¹H NMR in CDCl₃/d-TFA. The polyproline grafted carbon nanotubes (CNTs) were readily dissolved in organic solvents in contrast to the insoluble pristine and amine-functionalized CNTs.     

Poly(alkylene oxide) ionomers. XIII. Copolymers of trioxane with the epoxide and 1,3-dioxolane of methyl 10-undecenoate

Cationic copolymerization of 1,3,5-trioxane with methyl 10,11-epoxyundecanoate or methyl 7,8-epoxyoctanoate and terpolymerization with 1,3-dioxolane was successfully carried out. Co-and terpolymerization of 1,3,5-trioxane with 4-(1-carbomethoxynonyl)-1,3-dioxolane was also achieved. Feed compositions of the functional comonomers were varied from 5 to 40 mol %; in all cases the isolated copolymers contained less than 5% of the functional mer units. The composition of the copolymers showed that the methyl ω-epoxyalkanoates were much less reactive than 1,3,5-trioxane. A similar trend was observed with the functional dioxolane monomer, although significantly shorter induction periods were observed in comparison with the epoxy/trioxane copolymerizations. The oxymethylene copolymers and terpolymers were characterized primarily by their infrared spectra; however, the thermal and base stabilities of selected copolymers were also determined.     

Encapsulation and dispersion of carbon black by an in situ controlling radical polymerization of AA/BA/St with DPE as a control agent

In this paper, a new strategy to encapsulate and disperse carbon black by an in situ controlling free radical polymerization of 1,1-Diphenylenthyene (DPE) method was developed. Firstly, a living amphipathic precursor polymer of P (AA-BA) containing DPE unit was synthesized. This precursor could be grafted or absorbed on the surface of small carbon black particles to prevent further aggregation of carbon black. And the DPE unit in the living amphipathic precursor could initiate following monomer to form polymer shell via in situ polymerization. Carbon black/polymer core-shell composite particles with 69.6 wt.% polymer shell were prepared. The encapsulated carbon black had a small particle size and high performance on dispersibility and stability. Encapsulation mechanism of this method was confirmed by analyses of TEM, UV–vis, ¹H NMR, ¹³C NMR, TGA, and other instruments.     

Oligomeric Branched Polyethers with Multiple Hydroxyl Groups by Cationic Ring-Opening Polymerization for Inorganic Surface Modification

Summary: Cationic ring-opening polymerization of cyclic ethers (also esters and acetals) substituted with hydroxyl groups leads to branched multihydroxyl polymers. When 4-membered hydroxysubstituted oxetanes or 5-membered hydroxysubstuituted oxolanes (or lactone and 1,3-dioxolane) are used as monomers the polymerization products have limited molecular weights (about 1000). Polymerization of these monomers leading in situ to oligomeric products was used for inorganic surface modification. Successful polymerizations of oxetane as well as considered as difficult to polymerize 5-membered hydroxysubstituted cyclic monomers initiated from montmorillonite clay and silica nanoparticles surfaces were performed.