微流控芯片电泳-多重聚合酶链反应法同时测定多个单碱基多态性位点

以微流控芯片电泳为检测平台,建立了多重PCR扩增法同时测定多个单碱基多态性(SNP)位点的方法。先通过PCR扩增得一段含所有待测SNP位点的长片段;用限制性内切酶消化成短片段,再将酶切反应产物与脱氧核糖核酸适配器(DNAadapter)相连;以连接产物为模板,分成两管,分别用n条等位基因特异性引物和一条通用引物进行n重PCR扩增;最后用微流控芯片电泳法分离PCR扩增产物,根据两管扩增产物的芯片电泳图谱中扩增片段的大小判断SNP的类型。以细胞色素P4502D6(CYP2D6)基因中的5个SNP位点(100C>T、1661G>C、1758G>T、2470T>C和2850C>T)为检测对象,考察了各等位基因特异性引物之间的相互影响和扩增反应的特异性,采用微流控芯片电泳法成功测定了20名健康中国人的CYP2D6基因中5个SNP位点的基因多态性,与聚合酶链反应-限制性片段长度多态性法(PCR-RFLP)测定结果完全一致。     

聚甲基丙烯酸甲酯微流控芯片分离 DNA片段的初步研究

自从1995年Mathies[1]首次将微流控芯片毛细管凝胶电泳用于基因测序研究以来,DNA片段的分离已成为微流控芯片应用的重要领域之一.最早应用于DNA分析的微流控芯片是玻璃芯片,聚合物微流控芯片以其品种多、成本低、易于加工,与玻璃芯片相比具有封接温度大大降低,微通道内电渗流显著减小等特点,已被成功应用于DNA片段的分离[2,3].     

液滴微流控系统在数字聚合酶链式反应中的应用研究进展

数字聚合酶链式反应( PCR)技术近年来发展迅速。与以实时荧光定量PCR为代表的传统PCR技术相比,数字PCR技术显著提高了定量分析的精确度和灵敏度。数字PCR的快速发展与近年来微流控技术在数字PCR技术中的广泛应用有着密切的联系。早期的研究和商业化产品使用的是大规模集成流路微流控芯片,加工过程复杂且价格高昂。近年来,液滴微流控芯片被应用到数字PCR技术中,它可以在短时间内产生102~107个微液滴,每一个微液滴都是最多只含有一个目的基因片段的PCR反应器。 PCR扩增后,通过对单个微液滴的观察计数,就可以获得绝对定量的分析数据。本文综述了不同种类的液滴微流控系统在数字PCR技术中的应用,以及液滴数字PCR微流控芯片在生物、医药、环境等领域的应用。     

微流控芯片操纵传输及实时监测单细胞量子释放

微流控芯片技术用于细胞生化分析已引起了广泛关注.Harrison等首次在微流控芯片上对细胞群体进行操纵、传输及反应.yang等在微流控芯片上操纵细胞群体的排列,并用荧光检测细胞群体摄取钙的反应.至今还未见到微流控芯片对单个细胞进行操纵传输、定位及实时监测的报道.单细胞受激释放的监测对探索生物体神经传导具有重要意义.     

基于Labview的芯片PCR PID温控系统研究

温度控制是决定聚合酶链反应(PCR)扩增成败的关键因素之一。与常规PCR相比,芯片PCR具有样品和试剂用量少、加热体积更小、加热效率高、热循环时间短等优点,而反应体积缩小同时对温度控制精度和速度提出了更高的要求。本文介绍了一种基于Labview的微流控PCR芯片温度控制系统的设计与制作,并成功对80bp的核酸适配体片段进行扩增。     

微流控分析芯片上生化反应技术研究进展

综述了近几年来在微流控芯片上以检测或动力学研究为目的而进行的各种生物化学反应技术，包括酶反应、免疫反应、酶联免疫反应、PCR反应，含氮氧化物释放反应。对非均相反应的蛋白质在微管道中的固定技术，均相反应的管道设计技术，以及在微流控芯片上集成生化反应的优越性等问题做了详细的讨论。     

微流控芯片上同工酶的孵育及活性检测

建立了一种在微流控芯片上进行同工酶孵育及活性检测的方法. 该方法在集成温控装置的微流控芯片上实现对同工酶与辅酶反应进程的控制, 完成同工酶的进样、孵育反应、电泳分离和活性检测的实验步骤. 建立了基于微流控芯片的同工酶荧光检测系统, 使用360 nm光源激发辅酶产生荧光, 在460 nm处选择性采集荧光信号. 在微流控芯片上实现了同工酶样品的快速活性检测, 酶活性检测限达到0.5 U/L.     

磁控微流控芯片的研究现状及应用

微流控芯片作为一种现代分析方法,近年来得到迅速发展。而磁控微流控芯片是在微流控芯片中引入磁场调控,通过引入磁场丰富了微流控芯片的操控手段,同时结合了磁性材料的优势,使之成为微流控芯片研究的重要组成部分之一。本文重点介绍磁控微流控芯片的研究现状及应用。     

集成核酸提取的实时荧光PCR微全分析系统

集成核酸提取的实时荧光PCR微全分析系统将核酸提取、PCR扩增与实时荧光检测进行整合,在同一块微流控芯片上实现了核酸分析过程的全自动和全封闭,具有试剂用量少、分析速度快、操作简便等优点。本研究采用微机械加工技术制作集成核酸提取微流控芯片的阳极模,使用组合模具法和注塑法制作具有3D通道的PDMS基片,与玻璃基底通过等离子体键合封装成集成核酸提取芯片。构建了由微流体速度可调节(0~10 mL/min)的驱动控制装置、温控精度可达0.1℃的TEC温控平台、CCD检测功能模块等组成的微全分析系统。以人类血液裂解液为样品,采用硅胶膜进行芯片上核酸提取。系统根据设置好的时序自动执行,以2 mL/min的流体驱动速度完成20μL裂解液上样、清洗;以1 mL/min的流体驱动速度完成DNA洗脱,抽取PCR试剂与之混合注入到反应腔。提取的基因组DNA以链上内参基因GAPDH为检测对象,并以传统手工提取为对照,在该系统平台上进行PCR扩增和熔解曲线分析实验。片上PCR扩增结果显示,扩增曲线明显,Ct值分别为25.3和26.9。扩增产物进行熔解曲线分析得到的熔解温度一致,均为89.9℃。结果表明,此系统能够自动化、全封闭的在微流控芯片上完成核酸提取、PCR扩增与实时定量分析。     

微通道反应器在合成反应中的应用

微流控学(microfluidics)是在微米级结构中操控纳升至皮升体积流体的技术与科学,是近10年来迅速崛起的新交叉学科.流体在微流控芯片微米级通道中,由于尺度效应导致了许多不同于宏观体系的特点,例如分子间扩散距离短、微通道的比表面积大、传热和传质速度快等,促进了微流控芯片在有机合成反应中的发展.本文总结了微通道反应器的特点、微通道反应器中常用的流体驱动技术和微通道中流体的混合技术.通过一系列在微流控芯片中进行的有机合成反应,包括液-液均相反应、催化反应、相转移反应和异常激烈的有机合成反应等,进一步说明了微通道反应器同时具有微量和连续流动的优点.微通道反应器的发展不但在合成路线的优化方面有重要意义,而且有助于相关化学工业过程的改进.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.