Speciation of Heavy Metals in Soils and Sediments. An Account of the Improvement and Harmonization of Extraction Techniques Undertaken Under the Auspices of the BCR of the Commission of the European Communities

Abstract

An account is presented of a series of investigations and collaborative studies, initiated by BCR, on current methods of metal speciation by extraction of soils and sediments with chemical reagents. It was established by extensive consultation with European experts that the diverse procedures used could be harmonized into agreed methods. These methods, including both single extractant and sequential extraction procedures were subjected to collaborative, interlaboratory trials and the results, presented briefly here, showed that it was both possible and desirable that reference soils and sediments, characterised by certified values for extractable contents, be prepared. As a consequence of these studies two soils have been prepared and will shortly be the subject of interlaboratory analysis with a view to certification of their EDTA and acetic acid extractable contents of some heavy metals. Following this workshop a feasibility study of the agreed sequential extraction procedure will, it is believed, shortly lead to certification of sediments for contents extractable by a defined sequential extraction procedure.     

Operationally defined extraction procedures for soil and sediment analysis: II. Certified reference materials

Single or sequential extraction procedures are often used for soil and sediment studies to determine forms or phases of elements (e.g. `bioavailable' forms of elements). The significance of the analytical results is highly dependent on the extraction procedures used, owing to the `operationally defined' character of these schemes which requires the adoption of standardized protocols. The first part of the present review discusses the aspects of standardization of leaching and extraction schemes as applied to environmental analysis. This second part focuses on the validation aspects of such procedures and describes the preparation and certification of soil and sediment reference materials certified for their extractable trace element contents, following standardized single and sequential extraction procedures.     

Operationally defined extraction procedures for soil and sediment analysis: II. Certified reference materials

Single or sequential extraction procedures are often used for soil and sediment studies to determine forms or phases of elements (e.g. ‘bioavailable' forms of elements). The significance of the analytical results is highly dependent on the extraction procedures used, owing to the ‘operationally defined' character of these schemes which requires the adoption of standardized protocols. The first part of the present review discusses the aspects of standardization of leaching and extraction schemes as applied to environmental analysis. This second part focuses on the validation aspects of such procedures and describes the preparation and certification of soil and sediment reference materials certified for their extractable trace element contents, following standardized single and sequential extraction procedures.     

Comparison of single extraction procedures,using either conventional shaking or microwave heating,and the Tessier sequential extraction method for the fractionation of heavy metals from environmental samples

The conventional four-step sequential extraction method and the EDTA and acetic acid single extraction procedures were applied to sewage sludge and sediment samples. The results obtained with these samples for Cu, Cr, Ni, Pb and Zn using the Tessier method were compared with those supplied by the two single extraction procedures employed. In addition, the Tessier method was also applied to a reference material, CRM 483, and these results were also compared with the certified EDTA and acetic acid values for this sample. As a result, good agreement was found between the metal contents released in the first three fractions of the Tessier method and those leached by the simpler single extraction procedures for the most of the elements studied. Subsequently, the conventional EDTA and acetic acid extraction methods were accelerated by means of microwave energy, in order to reduce the operating time. The extraction efficiency of the first three fractions of the Tessier method was compared with that obtained using the optimised microwave single extraction procedures and only in sewage sludge and CRM 483 samples were satisfactory results found for all the elements studied, except Cr and Pb. This means that the microwave single extraction procedures optimised in this work could be employed as screening methods to evaluate rapidly the easiest mobilizable heavy metals in these samples, although more samples should be analysed to determine their general applicability. The application of the accelerated single extraction procedures to a reference material, CRM 483, provided satisfactory results for all the elements studied, except for Cr in both methods and for Pb in the acetic acid extracts.     

Determination of nickel,gold and silver in gallium arsenide by radioactivation analysis based on the quantitative isotope dilution principle

A method of radioactivation analysis has been developed for the determination of Ni, Au and Ag impurities in gallium arsenide. The separation and substoichiometric extraction of these elements were studied and analytical procedures are suggested for their determination. All components are separated by suitable procedures and determined by substoichiometric methods. Ni is extracted as diethyldithiocarbamate into toluene, Au as a complex of rhodamine-B in chloroform, and Ag as dithizonate in carbon tetrachloride. The contents of Ni, Au and Ag in a gallium arsenide crystal with a carrier concentration of 1.8·10¹⁶/cm³ were 0.05–0.08, 0.006–0.008 and 0.002–0.005 ppm, respectively.     

Determination of the total amount of organically bound chlorine,bromine and iodine in environmental samples by instrumental neutron activation analysis

The determination of chlorine, bromine and iodine present as non-polar, hydrophobic hydrocarbons in environmental samples is reported. The organohalogen compounds are separated from water into an organic phase by on-site liquid—liquid extraction, and from biological material by procedures based on lipid phase extraction and codistillation. After removal of inorganic halides by washing with water and concentration of the sample by evaporation of the solvent, the resulting extracts are analyzed for their chlorine, bromine and iodine contents by instrumental neutron activation analysis. Strict attention is paid to the possibility of contamination in every step of the procedure. Background values in routine analysis are approximately 100–200 ng of chlorine, <5 ng of bromine and <3 ng of iodine.     

Extraction procedures for the determination of heavy metals in contaminated soil and sediment

Extraction tests are commonly used to study the mobility of metals in soils and sediments by mimicking different environmental conditions or dramatic changes on them. The results obtained by determining the extractable elements are dependent on the extraction procedure applied. The paper summarises state of the art extraction procedures used for heavy metal determination in contaminated soil and sediments. Two types of extraction are considered: single and sequential. Special attention is paid to the Standard, Measurement and Testing projects from the European Commission which focused on the harmonisation of the extraction procedures and on preparing soil and sediment certified reference materials for extractable heavy metal contents.     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Certified reference material for the quality control of EDTA- and DTPA-extractable trace metal contents in calcareous soil (CRM 600)

Single extraction tests are commonly used to study the eco-toxicity and mobility of metals in soils, e.g. to assess the bioavailable metal fraction (and thus to estimate the related phyto-toxic and nutritional deficiency effects) and the environmentally accessible trace metals upon disposal of e.g. sediment on to a soil (e.g. contamination of ground waters). However, the lack of uniformity in the different procedures does not allow the results to be compared worldwide nor the procedures to be validated. This paper describes the interlaboratory testing of EDTA- and DTPA-extraction procedures for soil analysis, followed by the preparation of a calcareous soil reference material (CRM 600), the homogeneity and stability studies and the analytical work performed for the certification of the EDTA- and DTPA- extractable contents of some trace metals (following the standardized extraction procedures). Received: 21 May 1997 / Revised: 4 July 1997 / Accepted: 9 July 1997     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

A comparison of sequential extraction procedures for fractionation of arsenic,cadmium, lead,and zinc in soil

Twelve soil samples differing in physicochemical properties and total element contents were extracted by three sequential extraction procedures to determine As, Cd, Pb, and Zn bound to individual soil fractions and are defined by individual operational procedures. In the case of arsenic, two additional sequential extraction schemes were designed entirely for fractionation of soil containing arsenic were tested. The results confirmed that determination of element proportions bound to individual soil fractions is strongly dependent on the extracting agent and/or procedure applied within individual extracting schemes. As expected, absolute values of the elements released among the individual extracting procedures are weakly comparable. More reliable results were determined for the more mobile soil elements i.e. cadmium and zinc, in the fractions characterizing the most mobile proportions of investigated elements where significant correlations with basic soil characteristics were observed. In contrast, ambiguous results were observed for As and Pb, for both the individual extraction procedures and the effect of the soil characteristics. Regardless of the studied element, the poorest results were determined for reducible and oxidizable soil fractions. The application of at least two independent procedures or modification of the extraction scheme according to element investigated and/or particular soil characteristics can also be helpful in definition of element pattern in soils in further research.     

Optimal strategies for determination of free/extractable and total microcystins in lake sediment

The optimization of analytical procedures for the quantification of free and total microcystins (MCs) in natural sediments was systematically examined based on solvent extraction and Lemieux oxidation. In this optimized analytical procedure, a sequential solvent extraction using 50% (v/v) methanol and EDTA-sodium pyrophosphate was selected as the optimal extraction solvent for free MCs analysis, after which the purified extracts and sediment residuals were applied to the optimized Lemieux oxidation for determination of total MCs in lake sediments. The optimized procedures were shown to be efficient and reliable for the routine analysis of both free and total MCs in lake sediment samples, as indicated by the minimal adverse impact of sediment organic matter on the recovery of free MCs and yield of MMPB (2-methyl-3-methoxy-4-phenylbutyric acid). Finally, the developed procedures were applied to field sediment samples collected from Lake Dianchi during a bloom season and seven of thirty samples showed positive results.     

Strategy of analysis for the estimation of the bioavailability of zinc in foodstuffs

After the application of simulated digestive fluids (gastric and intestinale fluid) as extraction solutions, AAS and differential pulse anodic-stripping voltammetry (DPASV) were used as analytical methods in combination with ion-exchange procedures for the determination of zinc species and total zinc contents. The ion exchange procedure and the shifting of electrochemical potentials as well as changes of the calibration slope after standard addition in the polarographic analysis allowed discriminating statements with regard to a possible resorption of zinc. On the basis of these methods, a strategy is presented for in vitro investigations of the bioavailability of zinc in foodstuffs.     

Improved ion-pair high-performance liquid chromatographic method for the quantification of a wide variety of nucleotides and sugar-nucleotides in animal cells.

An improved method including extraction procedures is presented for the analysis of nucleotides in suspension-cultivated animal cells. Quantification was performed by ion-pair high-performance liquid chromatography after perchloric acid extraction. It was found that the amount of perchloric acid taken for extraction influenced the yield and that cell washing procedures caused deterioration of the analysis results for triphosphates. More than thirty nucleotides and sugar-nucleotides were separated within 25 min using a Supelcosil reversed-phase column (3 microns) with tetrabutylammonium hydrogensulphate as pairing agent and methanol-pH gradient elution. Cultivated hybridoma cells showed variations in intracellular nucleotide concentrations as well as relative amounts during different growth phases, which could reflect the physiological state of a cell culture.     

Development and application of an analytical protocol for evaluation of treatment processes for landfill leachates. I. Development of an analytical protocol for handling organic compounds in complex leachate samples

A strategy is presented for evaluation of treatment procedures for landfill leachate with emphasis on organic pollutants. An analytical scheme, the LAQUA protocol, was developed as a guide for the analytical work. The protocol includes organic as well as metals, inorganic ions, water-quality parameters, and toxicity. The proposed strategy considers the behaviour of both polar and non-polar organic substances at trace levels. For polar substances, phenols were chosen as markers and determined with an automated supported liquid membrane extraction device, coupled on-line to HPLC with a diode-array detector. For non-polar substances, PCBs and 10 unidentified compounds were chosen as markers and analysed by solid-phase extraction combined with supercritical fluid extraction with GC analysis. The chosen measurement strategy, based on the use of marker substances, difference measurements, and versatile data-handling procedures, provided essential information about complex systems at relatively low cost.     

Evaluation of different clean-up procedures for the analysis of heterocyclic aromatic amines in a lyophilized meat extract

Along with other mutagenic and carcinogenic contaminants in foods such as aflatoxins, and polycyclic aromatic hydrocarbons, heterocyclic aromatic amines (HAAs) have received considerable attention in recent years. A major drawback in the analysis of HAAs in foods is their very low level of concentration (0.1 50 ng g-1) as well as matrix interferences. Solid-phase extraction (SPE), forming an integral part of chromatographic analysis, is one of the procedures currently used for the extraction and purification of HAAs in food samples. In this paper a comparative study of several SPE procedures for HAAs determination was performed. Recoveries of the heterocyclic amines in the analysis of both a simple matrix such as a standard methanolic solution and a contaminated meat extract were established. HAAs were determined by HPLC analysis with photodiode-array detection (DAD) of the purified extracts, and the adequacy of different clean-up procedures for the analysis of a contaminated meat extract was discussed.     

高富勒烯的提取,分离和分析

采用二硫化碳重结晶富勒烯混合物或二硫化碳二次抽提烟灰以提取高富勒烯（ｈｉｇｈｅｒｆｕｌｅｒｅｎｅｓ，Ｃｎ，ｎ＞７０）。产物经高效液相色谱分析，高富勒烯的含量从１％分别提高到４％和６％；经激光飞行时间质谱证明，产物中除含主要成分Ｃ６０和Ｃ７０以外，还含有Ｃ７６、Ｃ７８、Ｃ８２、Ｃ８４以及更高碳原子的富勒烯。     

Determination of bioavailable fractions of Zn, Cu, Ni, Pb and Cd in soils and sludges by atomic absorption spectrometry

The single extraction procedures validated by the standards, measurement and testing programme (formerly BCR), extraction with 0.05 mol l⁻¹ EDTA and 0.43 mol l⁻¹ acetic acid, have been applied to reference materials of soils and sludges with certified total values of elements, in order to determine bioavailable contents of Cd, Cu, Ni, Pb and Zn. These soils, which represent uncontaminated pedologically different types of soils from Slovakia and sludges from city water treatment are characterized for the bioavailable fraction of the metals using the procedures followed by SM&T Programme. Concentrations of the elements under the study in the extracts were determined by flame (FAAS) using calibration curves in appropriate extractants and by electrothermal (ETAAS) atomic absorption spectrometry, using technique of standard additions for the evaluation of the results. The accuracy of the extraction procedures and determinations of the elements in the extracts was controlled using CRM 483 certified for EDTA- and acetic acid-extractable contents of Cd, Cu, Ni, Pb and Zn in sewage sludge amended soil.     

On the methodology of radiochemical neutron activation analysis of noble matals

Two different radiochemical procedures were developed: chelate ion resin exchange and amine solvent extraction. Two kinds of new Chinese chelate resins (NANKAI-3926 and BEI-5) and a new longchain primary amine N₁₉₂₃ were compared with the Srafion NMRR and the tertiary amine N₂₃₅ in absorption performance of noble metals, respectively. Influences of various experimental conditions, e. g. sample digestion, acidity, equilibrium time, as well as elution of noble metals, on analytical sensitivity and chemical yield were discussed. Combining with neutron activation, the radiochemical separation procedures developed were used to determine the noble metal contents in the geological samples from Permian/Triassic boundary in South China.