Vacancy‐Controlled Na+ Superion Conduction in Na11Sn2PS12

Highly conductive solid electrolytes are crucial to the development of efficient all‐solid‐state batteries. Meanwhile, the ion conductivities of lithium solid electrolytes match those of liquid electrolytes used in commercial Li⁺ ion batteries. However, concerns about the future availability and the price of lithium made Na⁺ ion conductors come into the spotlight in recent years. Here we present the superionic conductor Na₁₁Sn₂PS₁₂, which possesses a room temperature Na⁺ conductivity close to 4 mS cm^?1, thus the highest value known to date for sulfide‐based solids. Structure determination based on synchrotron X‐ray powder diffraction data proves the existence of Na⁺ vacancies. As confirmed by bond valence site energy calculations, the vacancies interconnect ion migration pathways in a 3D manner, hence enabling high Na⁺ conductivity. The results indicate that sodium electrolytes are about to equal the performance of their lithium counterparts.     

Sodium 2‐oxo‐3‐semicarbazono‐2,3‐dihydro‐1H‐indole‐5‐sulfonate dihydrate

The title compound, Na⁺·C₉H₇N₄O₅S⁻·2H₂O, presents a Z configuration around the imine C=N bond and an E configuration around the C(O)NH₂ group, stabilized by two intra­molecular hydrogen bonds. The packing is governed by ionic inter­actions between the Na⁺ cation and the surrounding O atoms. The ionic unit, Na⁺ and 2‐oxo‐3‐semicarbazono‐2,3‐dihydro‐1H‐indole‐5‐sulfonate, forms layers extending in the bc plane. The layers are connected by hydrogen bonds involving the water mol­ecules.     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.     

Na6(H2O)20(V10O28)·4H2O,a novel polyvanadate(V) with a three‐dimensional framework

The novel title polyvanadate(V), poly[[octa‐μ‐aqua‐dodecaaqua‐μ₄‐octacosaoxidodecavanadato‐hexasodium] tetrahydrate], [Na₆(H₂O)₂₀(V₁₀O₂₈)·4H₂O]_n, contains [V₁₀O₂₈]⁶⁻ anions which lie about inversion centres and have approximate 2/m symmetry and which are linked to [Na₃(H₂O)₁₀]³⁺ cations through two terminal and two μ₂‐bridging O atoms. The structure contains three inequivalent Na⁺ cations, two of which form [Na₂(H₂O)₈]_n chains, which are linked via NaO₆ octahedra involving the third Na⁺ ion, thus forming a three‐dimensional framework.     

Poly[[diaquabis[μ2‐2‐(4‐pyridinio)propane‐1,3‐dionato‐κ2O:O′]cobalt(II)] dinitrate]

The title compound, {[Co(C₈H₇NO₂)₂(H₂O)₂](NO₃)₂}_n, is the first d‐metal ion complex involving bidentate bridging of a β‐dialdehyde group. The Co²⁺ ion is situated on an inversion centre and adopts an octahedral coordination with four equatorial aldehyde O atoms [Co—O = 2.0910 (14) and 2.1083 (14) Å] and two axial aqua ligands [Co—O = 2.0631 (13) Å]. The title compound has a two‐dimensional square‐grid framework structure supported by propane‐1,3‐dionate O:O′‐bridges between the metal ions. The organic ligand itself possesses a zwitterionic structure, involving conjugated anionic propane‐1,3‐dionate and cationic pyridinium fragments. Hydrogen bonding between coordinated water molecules, the pyridinium NH group and the nitrate anions [O...O = 2.749 (2) and 2.766 (3) Å, and N...O = 2.864 (3) Å] is essential for the crystal packing.     

An O3‐type Oxide with Low Sodium Content as the Phase‐Transition‐Free Anode for Sodium‐Ion Batteries

Layered transition metal oxides Na_xMO₂ (M=transition metal) with P2 or O3 structure have attracted attention in sodium‐ion batteries (NIBs). A universal law is found to distinguish structural competition between P2 and O3 types based on the ratio of interlayer distances of the alkali metal layer d_(O‐Na‐O) and transition‐metal layer d_(O‐M‐O). The ratio of about 1.62 can be used as an indicator. O3‐type Na_0.66Mg_0.34Ti_0.66O₂ oxide is prepared as a stable anode for NIBs, in which the low Na‐content (ca. 0.66) usually undergoes a P2‐type structure with respect to Na_xMO₂. This material delivers an available capacity of about 98 mAh g^?1 within a voltage range of 0.4–2.0 V and exhibits a better cycling stability (ca. 94.2 % of capacity retention after 128 cycles). In situ X‐ray diffraction reveals a single‐phase reaction in the discharge–charge process, which is different from the common phase transitions reported in O3‐type electrodes, ensuring long‐term cycling stability.     

Imidazole Coordinated Sandwich‐type Antimony Poly‐oxotungstates Na9[{Na(H2O)2}3{M(C3H4N2)}3(SbW9O33)2]·xH2O (M=NiII,CoII, ZnII,MnII)

The imidazole covalently coordinated sandwich‐type heteropolytungstates Na₉[{Na(H₂O)₂}₃{M(C₃H₄N₂)}₃‐ (SbW₉O₃₃)₂]·xH₂O (M=Ni^II, x=32; M=Co^II, x=32; M=Zn^II, x=33; M=Mn^II, x=34) were obtained by the reaction of Na₂WO₄·2H₂O, SbCl₃·6H₂O, NiCl₂·6H₂O [MnSO₄·H₂O, Co(NO₃)₂·6H₂O, ZnSO₄·7H₂O] and imidazole at pH≈7.5. The structure of Na₉[{Na(H₂O)₂}₃{Ni(C₃H₄N₂)}₃(SbW₉O₃₃)₂]·32H₂O was determined by single crystal X‐ray diffraction. Polyanion [{Na(H₂O)₂}₃{Ni(C₃H₄N₂)}₃(SbW₉O₃₃)₂}₃]^9? has approximate C_3v symmetry, imidazole coordinated six‐nuclear cluster [{Na(H₂O)₂}₃{Ni(C₃H₄N₂)}₃]⁹⁺ is encapsulated between two (α‐SbW₉O₃₃)^9?, the three rings of imidazole in the polyanion are perpendicular to the horizontal plane formed by six metals (Na‐Ni‐Na‐Ni‐Na‐Ni) in the central belt, and π‐stacking interactions exist between imidazoles of neighboring polyanions with dihedral angel of 60°. The compounds were also characterized by IR, UV‐Vis spectra, TG and DSC, and the thermal decomposition mechanism of the four compounds was suggested by TG curves.     

Self‐Assembly of [B‐SbW9O33]9− Subunit with Transition Metal Ions (Mn2+, Cu2+, Co2+) in Aqueous Solution: Syntheses,Structures and Magnetic Properties of Sandwich Type Polyoxometalates with Subvalent SbIII Heteroatom

Rational self‐assembly of Sb₂O₃ and Na₂WO₄, or (NH₄)₁₈[NaSb₉W₂₁O₈₆] with transition‐metal ions (Mn²⁺, Cu²⁺, Co²⁺), in aqueous solution under controlled conditions yield a series of sandwich type complexes, namely, Na₂H₂[Mn_2.5W_1.5(H₂O)₈(B‐β‐SbW₉O₃₃)₂]?32 H₂O (1) , Na₄H₇[Na₃(H₂O)₆Mn₃(μ‐OAc)₂(B‐α‐SbW₉O₃₃)₂]?20 H₂O (OAc=acetate anion) (2) , NaH₈[Na₂Cu₄Cl(B‐α‐SbW₉O₃₃)₂]?21 H₂O (3) , Na₈K[Na₂K(H₂O)₂{Co(H₂O)}₃(B‐α‐SbW₉O₃₃)₂]? 10 H₂O (4) , and Na₅H[{Co(H₂O)₂}₃W(H₂O)₂(B‐β‐SbW₉O₃₃)₂]?11.5 H₂O (5) . These structures are determined by using the X‐ray diffraction technique and further characterized by obtaining IR spectra and performing elemental analysis. Structure analysis reveals that polyoxoanions in 1 and 5 comprise of two [B‐β‐SbW₉O₃₃]^9? building units, whereas 2 , 3 , and 4 consist of two isomerous [B‐α‐SbW₉O₃₃]^9? building blocks, which are all linked by different transition‐metal ions (Mn²⁺, Cu²⁺, or Co²⁺) with different quantitative nuclearity. It should be noted that compound 2 represents the first one‐dimensional sinusoidal chain based on sandwich like tungstoantimonate building blocks through the carboxylate‐bridging ligands. Additionally, 3 is constructed from sandwiched anions [Na₂Cu₄Cl(B‐α‐SbW₉O₃₃)₂]^9? linked to each other to form an infinitely extended 2D network, whereas 5 shows an interesting 3D framework built up from offset sandwich type polyoxoanion [{Co(H₂O)₂}₃W(H₂O)₂(B‐β‐SbW₉O₃₃)₂]^6? linked by Co²⁺ and Na⁺ ions. EPR studies performed at 110 K and room temperature reveal that the metal cations (Mn²⁺, Cu²⁺, Co²⁺) reside in a square‐pyramidal geometry in 2 , 3 , and 4 . The magnetic behavior of 1 – 4 suggests the presence of weak antiferromagnetic coupling interactions between magnetic metal centers with the exchange integral J=?0.552 cm^?1 in 2 .     

mer‐Diaquabis(1H‐imidazole‐κN3)[orotato(2–)]cobalt(II)

In the title complex, mer‐diaqua[2,6‐dioxo‐1,2,3,6‐tetrahydropyrimidine‐4‐carboxylato(2−)]bis(1H‐imidazole‐κN³)cobalt(II), [Co(C₅H₂N₂O₄)(C₃H₄N₂)₂(H₂O)₂], the Co^II ion is coordinated by a deprotonated N atom and the carboxylate O atom of the orotate ligand, two imidazole N atoms and two aqua ligands in a distorted octahedral geometry. The title complex exists as discrete doubly hydrogen‐bonded dimers, and a three‐dimensional network of O—H...O and N—H...O hydrogen bonds and weak π–π interactions is responsible for crystal stabilization.     

Unexpected oxidation of a diphos­phine by bis­(1,3‐diphenylpropane‐1,3‐dionato)­cobalt(II), [Co(dbm)2]

The reaction of bis­(1,3‐diphenylpropane‐1,3‐dionato)cobalt(II), [Co(dbm)₂], with bis­(diphenyl­phosphino)ethane (dppe) affords the coordination polymer catena‐poly[[bis­(1,3‐diphenyl­propane‐1,3‐dionato‐κ²O,O′)cobalt(II)]‐μ‐ethyl­enebis(diphenyl­phosphine oxide)‐κ²O:O′], trans‐[Co(C₁₅H₁₁O₂)₂(C₂₆H₂₄O₂P₂)]_n, as a result of oxidation of the diphos­phine. The Co atom is octa­hedral, with a CoO₆ coordination sphere, and the chelating dbm ligands adopt a trans configuration. The Co atom also lies on a centre of inversion, with a further symmetry centre bis­ecting the bridging ethyl­enebis(diphenyl­phosphine oxide) ligand.     

Na3SbS4: A Solution Processable Sodium Superionic Conductor for All‐Solid‐State Sodium‐Ion Batteries

All‐solid‐state sodium‐ion batteries that operate at room temperature are attractive candidates for use in large‐scale energy storage systems. However, materials innovation in solid electrolytes is imperative to fulfill multiple requirements, including high conductivity, functional synthesis protocols for achieving intimate ionic contact with active materials, and air stability. A new, highly conductive (1.1 mS cm^?1 at 25 °C, E_a=0.20 eV) and dry air stable sodium superionic conductor, tetragonal Na₃SbS₄, is described. Importantly, Na₃SbS₄ can be prepared by scalable solution processes using methanol or water, and it exhibits high conductivities of 0.1–0.3 mS cm^?1. The solution‐processed, highly conductive solidified Na₃SbS₄ electrolyte coated on an active material (NaCrO₂) demonstrates dramatically improved electrochemical performance in all‐solid‐state batteries.     

Nitrogen‐doped Carbon–CoOx Nanohybrids: A Precious Metal Free Cathode that Exceeds 1.0 W cm−2 Peak Power and 100 h Life in Anion‐Exchange Membrane Fuel Cells

Efficient and durable nonprecious metal electrocatalysts for the oxygen reduction (ORR) are highly desirable for several electrochemical devices, including anion exchange membrane fuel cells (AEMFCs). Here, a 2D planar electrocatalyst with CoO_x embedded in nitrogen‐doped graphitic carbon (N‐C‐CoO_x) was created through the direct pyrolysis of a metal–organic complex with a NaCl template. The N‐C‐CoO_x catalyst showed high ORR activity, indicated by excellent half‐wave (0.84 V vs. RHE) and onset (1.01 V vs. RHE) potentials. This high intrinsic activity was also observed in operating AEMFCs where the kinetic current was 100 mA cm^?2 at 0.85 V. When paired with a radiation‐grafted ETFE powder ionomer, the N‐C‐CoO_x AEMFC cathode was able to achieve extremely high peak power density (1.05 W cm^?2) and mass transport limited current (3 A cm^?2) for a precious metal free electrode. The N‐C‐CoO_x cathode also showed good stability over 100 hours of operation with a voltage decay of only 15 % at 600 mA cm^?2 under H₂/air (CO₂‐free) reacting gas feeds. The N‐C‐CoO_x cathode catalyst was also paired with a very low loading PtRu/C anode catalyst, to create AEMFCs with a total PGM loading of only 0.10 mg_Pt‐Ru cm^?2 capable of achieving 7.4 W mg^?1_PGM as well as supporting a current of 0.7 A cm^?2 at 0.6 V with H₂/air (CO₂ free)—creating a cell that was able to meet the 2019 U.S. Department of Energy initial performance target of 0.6 V at 0.6 A cm^?2 under H₂/air with a PGM loading <0.125 mg cm^?2 with AEMFCs for the first time.     

Poly[tetrasodium(I)‐tetra‐μ2‐bis(butane‐1,4‐diyldioxy)borato‐μ2‐1,4‐butane­diol]

In the title compound, [Na₄(C₈H₁₆BO₄)₄(C₄H₁₀O₂)]_n, there are two coordination types for the four independent Na⁺ cations: two Na⁺ cations bond to six diolate O atoms [Na—O = 2.305 (2)–2.609 (2) Å], while the other two are five‐coordinate via one 1,4‐butane­diol [2.289 (2) and 2.349 (3) Å] and four diolate O atoms [2.295 (2)–2.408 (2) Å]. Corresponding to this, there are three‐ and four‐coordinate diolate O atoms, the latter bridging Na atoms. The 1,4‐butane­diol mol­ecules lie on inversion centres. The boron stereochemistry shows minor local perturbations from its usual tetrahedral state [B—O = 1.457 (4)–1.503 (4) Å]. The resulting polymer packs as sheets parallel to the (10) plane crosslinked by the butane­diol mol­ecules. The structure was solved using data from a multiple crystal.     

Activating P2-NaxCoO2 for efficient water oxidation catalysis via controlled chemical oxidation

Electrocatalytic water oxidation is critically important for a wide range of emerging energy conversion devices. Co-based metal oxides are very promising candidates as high-performance oxygen evolution reaction (OER) catalysts. Here, it is shown that chemical oxidation of layered P2-Na_xCoO₂ could lead to compositionally tunable P2-Na_xCoO₂ with high OER activity. The optimal electrocatalytic activity emerges in a narrow range of sodium concentrations with Na_0·28CoO₂ exhibiting the lowest overpotential of 350 mV at 10 mA/cm² and a Tafel slope of 29 mV/dec in 0.1 M NaOH electrolyte, outperforming the benchmark RuO₂ catalyst and previous LiCoO₂-based electrocatalysts. Electrochemical measurements and X-ray spectroscopic investigations reveal that chemically oxidized P2-Na_xCoO₂ catalysts are intrinsically active toward OER, arising from the abundant oxygen vacancies, increased Co-O covalency, and enhanced conductivity after deintercalation of the Na⁺. Our findings provide new insights into the design and synthesis of cost-effective catalysts toward efficient and durable OER.     

Synthesis and crystal structure of a two‐dimensional sodium coordination polymer of 4,4′‐(diazenediyl)bis(1H‐1,2,4‐triazol‐5‐one)

The crystal engineering of coordination polymers has aroused interest due to their structural versatility, unique properties and applications in different areas of science. The selection of appropriate ligands as building blocks is critical in order to afford a range of topologies. Alkali metal cations are known for their mainly ionic chemistry in aqueous media. Their coordination number varies depending on the size of the binding partners, and on the electrostatic interaction between the ligands and the metal ions. The two‐dimensional coordination polymer poly[tetra‐μ‐aqua‐[μ₄‐4,4′‐(diazenediyl)bis(5‐oxo‐1H‐1,2,4‐triazolido)]disodium(I)], [Na₂(C₄H₂N₈O₂)(H₂O)₄]_n, (I), was synthesized from 4‐amino‐1H‐1,2,4‐triazol‐5(4H)‐one (ATO) and its single‐crystal structure determined. The mid‐point of the imino N=N bond of the 4,4′‐(diazenediyl)bis(5‐oxo‐1H‐1,2,4‐triazolide) (ZTO²⁻) ligand is located on an inversion centre. The asymmetric unit consists of one Na⁺ cation, half a bridging ZTO²⁻ ligand and two bridging water ligands. Each Na⁺ cation is coordinated in a trigonal antiprismatic fashion by six O atoms, i.e. two from two ZTO²⁻ ligands and the remaining four from bridging water ligands. The Na⁺ cation is located near a glide plane, thus the two bridging O atoms from the two coordinating ZTO²⁻ ligands are on adjacent apices of the trigonal antiprism, rather than being in an anti configuration. All water and ZTO²⁻ ligands act as bridging ligands between metal centres. Each Na⁺ metal centre is bridged to a neigbouring Na⁺ cation by two water molecules to give a one‐dimensional [Na(H₂O)₂]_n chain. The organic ZTO²⁻ ligand, an O atom of which also bridges the same pair of Na⁺ cations, then crosslinks these [Na(H₂O)₂]_n chains to form two‐dimensional sheets. The two‐dimensional sheets are further connected by intermolecular hydrogen bonds, giving rise to a stabile hydrogen‐bonded network.     

The sodium salt of 2‐hydroxy‐5‐nitrobenzylsulfonic acid

The structural data for sodium 2‐hydroxy‐5‐nitro­benzyl­sulfonate monohydrate, Na⁺·C₇H₆NO₆S^?·H₂O, which mimics an artificial substrate for human aryl­sulfatase A, viz. p‐­nitrocatechol sulfate, reveal that the geometric parameters of the substrate and its analogue are very similar. Two water mol­ecules, the phenolic O atom and three sulfonate O atoms form the coordination sphere of the Na⁺ ion, which is a distorted octahedron. The Na⁺ cations and the O atoms join to form a chain polymer.     

Chelation versus Binucleation: Metal Complex Formation with the Hexadentate all‐cis‐N1,N2‐Bis(2,4,6‐trihydroxy‐3,5‐diaminocyclohexyl)ethane‐1,2‐diamine

The hexadentate ligand all‐cis‐N¹,N²‐bis(2,4,6‐trihydroxy‐3,5‐diaminocyclohexyl)ethane‐1,2‐diamine (L^e) was synthesized in five steps with an overall yield of 39 % by using [Ni(taci)₂]SO₄?4 H₂O as starting material (taci=1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol). Crystal structures of [Na_0.5(H₆L^e)](BiCl₆)₂Cl_0.5?4 H₂O ( 1 ), [Ni(L^e)]‐ Cl₂?5 H₂O ( 2 ), [Cu(L^e)](ClO₄)₂?H₂O ( 3 ), [Zn(L^e)]CO₃?7 H₂O ( 4 ), [Co(L^e)](ClO₄)₃ ( 5 c ), and [Ga(H_?2L^e)]‐ NO₃?2 H₂O ( 6 ) are reported. The Na complex 1 exhibited a chain structure with the Na⁺ cations bonded to three hydroxy groups of one taci subunit of the fully protonated H₆(L^e)⁶⁺ ligand. In 2 , 3 , 4 , and 5 c , a mononuclear hexaamine coordination was found. In the Ga complex 6 , a mononuclear hexadentate coordination was also observed, but the metal binding occurred through four amino groups and two alkoxo groups of the doubly deprotonated H_?2(L^e)^2?. The steric strain within the molecular framework of various M(L^e) isomers was analyzed by means of molecular mechanics calculations. The formation of complexes of L^e with Mn^II, Cu^II, Zn^II, and Cd^II was investigated in aqueous solution by using potentiometric and spectrophotometric titration experiments. Extended equilibrium systems comprising a large number of species were observed, such as [M(L^e)]²⁺, protonated complexes [MH_z(L^e)]^2+z and oligonuclear aggregates. The pK_a values of H₆(L^e)⁶⁺ (25 °C, μ=0.10 m ) were found to be 2.99, 5.63, 6.72, 7.38, 8.37, and 9.07, and the determined formation constants (log β) of [M(L^e)]²⁺ were 6.13(3) (Mn^II), 20.11(2) (Cu^II), 13.60(2) (Zn^II), and 10.43(2) (Cd^II). The redox potentials (vs. NHE) of the [M(L^e)]^3+/2+ couples were elucidated for Co (?0.38 V) and Ni (+0.90 V) by cyclic voltammetry.     

2D l‐Di‐toluoyl‐tartaric acid Lanthanide Coordination Polymers: Toward Single‐component White‐Light and NIR Luminescent Materials

A series of five l ‐di‐p‐toluoyl‐tartaric acid (l ‐DTTA) lanthanide coordination polymers, namely {[Ln₄K⁴ L₆(H₂O)_x]?yH₂O}_n, [Ln=Dy ( 1 ), x=24, y=12; Ln=Ho ( 2 ), x=23, y=12; Ln=Er ( 3 ), x=24, y=12; Ln=Yb ( 4 ), x=24, y=11; Ln=Lu ( 5 ), x=24, y=12] have been isolated by simple reactions of H₂L (H₂L= L ‐DTTA) with LnCl₃?6 H₂O at ambient temperature. X‐ray crystallographic analysis reveals that complexes 1 – 5 feature two‐dimensional (2D) network structures in which the Ln³⁺ ions are bridged by carboxylate groups of ligands in two unique coordinated modes. Luminescent spectra demonstrate that complex 1 realizes single‐component white‐light emission, while complexes 2 – 4 exhibit a characteristic near‐infrared (NIR) luminescence in the solid state at room temperature.     

Synthesis,Structure, and Fluorescent Properties of Lanthanide Complexes Based on 8‐Hydroxyquinoline‐7‐carboxylic Acid

The lanthanide complex [Eu₃(8‐HQCA)₃(COOH)(OH)₂(H₂O)₃]_n · nH₂O (8‐HQCA = 8‐hydroxyquinoline‐7‐carboxylic acid) was synthesized and characterized. Single‐crystal X‐ray diffraction shows that the trinuclear structures are linked by ligands to form 2D layers. The results of DFT calculation shows that energy can be transferred effectively from the ligand to Eu^III ions. A series of heteronuclear complexes {[(Eu_1–xY_x)₃(8‐HQCA)₃(COOH) (OH)₂(H₂O)₃]_n · nH₂O (x = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8)} were synthesized and their luminescent properties were studied. The results showed that the doping of Y^III ions could change the fluorescent intensity of the Eu^III complex, but could not change their positions.     

trans‐(Methanol)(methyl­di­phenyl­phosphine)­bis­(pentane‐2,4‐dionato)­cobalt(III) hexa­fluoro­phosphate hydrate

The title compound [Co(C₅H₇O₂)₂(C₁₃H₁₃P)(CH₄O)]PF₆·H₂O, (I), which was converted from trans‐[Co(acac)₂(PMePh₂)(H₂O)]PF₆ (acac is pentane‐2,4‐dionato) by recrystallization from aqueous methanol, has been confirmed as have a coordinated methanol ligand. The molecular structure of the complex cation, trans‐[Co(acac)₂(PMePh₂)(MeOH)]⁺, is similar to that of the above aqua complex found in the ClO₄ salt [Kashiwabara et al. (1995). Bull. Chem. Soc. Jpn, 68 , 883–888]. The Co—O bond length for the coordinated methanol is 2.059 (3) Å. There is an intermolecular hydrogen bond between the OH group of the coordinated methanol and one of the O atoms of the acac ligands in an adjacent complex cation [O5?O3′ = 2.914 (4) Å], giving a centrosymmetric dimeric dicationic complex.