Mg-Zn-Al三金属类水滑石的合成及其复合氧化物的催化性能

水滑石（[Mg_６Al_２（OH）_(１６)[CO_３·４H_２O）是一种类似于水镁石结构的层状阴离子黏土，其骨架为阳离子，层间为阴离子。如改变骨架中的金属阳离子或在层间引入不同的阴离子，就可形成各种新组成的类水滑石。水滑石对有机分子反应具有较高的催化活性和选择性，且可以作为复合氧化物催化剂的前体，应用广泛。它作为碱催化剂，可用于醇醛缩合；作为氧化还原催化剂，用于水煤气转化、NO的还原、甲烷氧化反应等犤１，２犦。作为一种具有特殊结构的化合物，各种双金属组分的水滑石或类水滑石的合成、性质与应用已受到广泛的重视犤３…     

水滑石类催化剂催化制氢及生物炼制(英文)

近年来,水滑石由于其独特的性质受到越来越多的关注.作为非均相固体催化剂,水滑石及其衍生物具有优良的催化性能,因此得到了广泛研究和应用.本文简述了水滑石的几种合成方法,重点介绍了水滑石类催化剂在催化制氢和生物炼制方面的应用,并预测了水滑石类材料在新材料合成及环境友好催化体系中的应用前景.     

杂多酸阴离子[Co_2Bi_2W_(20)O_(70)]~(10-)柱撑水滑石光催化降解甲基橙

采用离子交换法合成了一种新型的杂多酸阴离子[Co2Bi2W20O70]10-柱撑水滑石类层状化合物,利用X射线衍射仪和傅立叶变换红外光谱仪分析了其晶相结构;研究了[Co2Bi2W20O70]10-柱撑水滑石光催化降解甲基橙的活性.结果表明,合成的[Co2Bi2W20O70]10-杂多酸阴离子柱撑水滑石较好地保持了水滑石原有的晶体形貌,具有较高的离子交换度.与此同时,杂多酸阴离子替换NO3-后,可以在一定程度上提高催化剂的催化活性.这主要归因于水滑石材料中杂多酸阴离子和水滑石层板之间的协同效应.     

水滑石纳米阵列电极在能量储存和转化中的应用

纳米技术在能源领域的应用为解决化石燃料的消耗和环境污染问题提供了新的契机.水滑石(LDHs)作为一类典型的阴离子黏土材料,其独特的组成、结构及形貌可调性,使其成为一类优秀的能源储存和转化材料.其中,将水滑石材料进行纳米阵列结构化设计,结合水滑石优异的物理化学性能和纳米阵列的结构特性,已经成为构建高性能电化学电极的重要方法.本文综述了水滑石基纳米阵列电极的合成及其在电化学能量储存和转化上的应用,并进一步讨论了水滑石纳米阵列材料在该领域面临的挑战和发展趋势.     

类水滑石及其杂多阴离子柱撑物的合成与表面酸性研究

合成了一些类水滑石和过渡金属取代型杂多酸盐，并由此制备了相应杂多阴离子柱撑水滑石层柱材料。用ＸＲＤ，ＩＲ和元素分析等手段对合成产物进行组成和结构表征，用ＮＨ３－ＴＰＤ，Ｐｙ－ＩＲ研究了合成产物的表面酸性和酸类型，并在异丙醇反应中考察了合成物的酸碱催化行为，结果表明，水滑石和柱撑水滑石均同时存在酸碱中心，且酸碱相对强度与柱阴离子类型密切相关。杂多阴离子进入水滑石层，同时改变了水滑石和杂多酸盐的酸强度     

Ni-Al类水滑石的制备及其Ni/Al2O3加氢脱硫研究

采用共沉淀方法合成了不同Ni/Al比的镍铝类水滑石,将其作为催化剂前驱体,制备了Ni/Al2O3加氢脱硫催化剂.通过X射线衍射法(XRD),程序升温还原(H2-TPR),热重分析(TG),傅里叶变换红外光谱(FT-IR)等技术对催化剂进行了表征.利用10 mL固定床装置在不同温度,压力,体积空速和氢油比条件下对Ni/Al2O3催化剂的加氢脱硫活性进行了评价.结果表明,XRD图和FT-IR图中均出现了Ni-Al类水滑石的特征峰,TG图呈现出两个明显阶段的失重,在Ni-Al2O3-HT的XRD图中最强的衍射角对应单质金属Ni粒子的(111)晶面.脱硫结果显示Ni-Al类水滑石作为前驱体在适当的条件下,FCC汽油的硫含量降至10 ppm以下.类水滑石作为前驱体的Ni/Al2O3加氢脱硫活性很好,说明类水滑石作为前驱体在加氢脱硫领域有好的应用前景.     

过渡金属取代型杂多阴离子柱撑水滑石上环己烯的催化氧化性能

类水滑石及杂多阴离子柱撑水滑石具有可调变的二维孔道结构,活性组分可在较宽的范围内进行调变,从而使其成为有应用前景的氧化催化剂'·'．迄今,以完整结构形态的水滑石为催化剂的催化氧化研究尚未见报道．我们发现［'－'j,含可变价元素的类水滑石和过渡金属取代型杂多阴离子柱撑水滑石具有在较低温度下活化分子氧,从而实现活泼烃类a－H氧化的能力·本文报道了M。AIXW;;ZO。。（M＝Mg'",Zn'";X＝p,St;Z＝Mn2＋,Fe2＋,C。2＋,Ni'",Cll'"）层柱材料上环己烯的催化氧化行为．1实验部分M。AI－XW;;ZO。。系列杂多…     

均匀沉淀法直接合成有机阴离子柱撑水滑石

以尿素为沉淀剂用均匀沉淀法直接合成有机阴离子柱撑水滑石(Layered Double Hydroxides，LDH)及CoAl水滑石等，并用XRD，FT—IR，TGA，TEM等分析手段对所合成的水滑石进行了表征．结果表明，尿素均匀沉淀法可以直接合成有机阴离子柱撑水滑石及CoAl水滑石等，并且可以方便地消除原料中阴离子的干扰，是合成有机阴离子柱撑水滑石及CoAl水滑石等的一个简便快速的新方法。     

磷钨酸插层Zn/Al类水滑石催化合成邻苯二甲酸二(2-乙基)己酯

以对苯二甲酸根阴离子为预支撑体,制备了磷钨酸插层Zn/Al类水滑石杂化物催化剂,将其用于邻苯二甲酸二(2-乙基)己酯(DOP)的合成反应.研究了原料配比、催化剂用量、反应温度、反应时间等对邻苯二甲酸酐转化率的影响,及催化剂的可重复利用性.结果表明,磷钨酸-Zn/Al类水滑石杂化催化剂对DOP合成的催化效果较好,在催化剂用量为苯酐质量的0.76%,异辛醇与邻苯二甲酸酐的摩尔比为2.5,反应温度为180℃,反应时间为4.5 h,带水剂环己烷约为苯酐质量65%的反应条件下,苯酐转化率可达92.8%;反应10 h转化率可达97.9%.催化剂重复使用时转化率略有下降,经过乙醇洗涤再生,活性即可基本恢复.     

水滑石无机阴离子交换剂的合成与表征

采用水热法制成了镁铝碳酸盐型、镁铝硝酸盐型、镁铝盐酸盐型、镁铝羟基型等插层镁铝类水滑石,比较了层间含不同阴离子类水滑石的结构差异和高温热处理后的结构稳定性.通过离子交换方式以镁铝羟基型为基材插层组装无机阴离子基团MoO42-、WO42-、CO32-和NO3-制得不同的阴离子插层类水滑石.通过XRD、TEM、XPS和热分析方法对镁铝类水滑石和阴离子插层类水滑石进行了表征.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.