Ferric Chloride Complexes in Aqueous Solution: An EXAFS Study

A series of concentrated aqueous solutions of ferric chloride with different chloride:iron(III) ratios has been studied by means of EXAFS to determine the structure around the iron(III) ion of the dominating species in such solutions. The dominating species in dilute acidic aqueous solution of ferric chloride, at less than 1 mmol·dm^?3, are the hydrated iron(III) and chloride ions, while in concentrated aqueous solution and in solutions with an excess of chloride ions, up to 1.0 mol·dm^?3, it is the trans-[FeCl₂(H₂O)₄]⁺ complex. Possible higher chloroferrate(III) or dimeric [Fe₂Cl₆] complexes at room temperature, as proposed in the literature, were not observed in any of the studied solutions in spite of an excess of chloride ions of 1 mol·dm^?3.     

Effects of ion-carrier substituents on the potentiometric-response characteristics in anion-selective membrane electrodes based on iron porphyrins.

The potentiometric response characteristics with respect to salicylate anion of several membrane electrodes based on iron(III) tetraphenylporphyrin chloride (FeTPPCl) and derivatives with electrophilic and nucleophilic substituents, incorporated into plasticized polyvinylchloride (PVC) membranes were investigated. Complexes tetraphenyl porphyrin iron(III) chloride (FeTPPCl; A), tetrakis (4-methoxyphenyl) porphyrin iron(III) chloride (Fe(TOCH3PP)Cl; B), tetrakis (2,6-dichlorophenyl) porphyrin iron(III) chloride (Fe(TDClPP)Cl; C), tetrakis (4-nitrophenyl) porphyrin iron(III) chloride (Fe(TNO2PP)Cl; D), and tetrakis (pentafluorophenyl) porphyrin iron(III) chloride (Fe(TPFPP)Cl; E) were used as anion carriers in the membrane electrodes. The sensitivity, working range, detection limit, response mechanism, and selectivity of the membrane sensor toward interference shows a considerable dependence on the type of carrier substituent and the pH value of the sample solution. Potentiometric investigations in solutions of various pH show that the carrier complex containing fluoro substituents (E), which have very strong electron-accepting properties and a high ability to form hydrogen bonds, is capable of serving as a positively charged ionophore. Some other ionophores are capable of serving as both charged and neutral carriers under different conditions. The electrodes prepared in this work show super-Nernstian slopes with respect to salicylate concentration, which tend to a Nernstian response (slope near to -59 mV decade-1) upon an increase of the pH of the test solution. The results of UV/Vis absorption spectroscopy are used for interpretation of the formation of an oxene complex between salicylate and iron porphyrins.     

无水FeCl_3存在下丙烯酸甲酯的单电子转移活性自由基聚合动力学

单电子转移活性自由基聚合(SET-LRP)是一种可以对聚合物进行有效分子设计,合成不同拓扑结构并且能够有效调节其相对分子质量和相对分子质量分布的新型聚合方法,具有潜在的应用前景。以2-溴丙酸甲酯作为引发剂,Cu(0)/三(N,N-二甲基氨基乙基)胺(Me6-TREN)为复合催化体系,通过在二甲基亚砜中添加不同摩尔浓度的无水FeCl_3来研究其对丙烯酸甲酯的SET-LRP聚合动力学的影响。结果表明,随着三价铁离子量的增加,其链增长速率常数下降并且出现诱导期延长现象,说明三价铁离子参与了SET-LRP的聚合动力学过程,它和在同样实验条件下二价铜所起的作用截然不同,这可能是由于三价铁离子的氧化导致反应体系中一价铜的浓度降低引起的。此项工作从另外一个角度解释了零价铜催化下SET-LRP聚合诱导期产生的原因。     

Ligand-to-metal ratio controlled assembly of tetra- and hexanuclear clusters towards single-molecule magnets

A simple template-mediated route, starting from triethalolamine 1, sodium hydride or caesium carbonate, and iron(III) chloride led to the six- and eight-membered iron coronates [Na c [Fe6[N(CH2CH2O)3]6]]+ (2) and [Cs c (Fe8[N(CH2CH2O)3]8]]+ (3). In the reaction of N-methyldiethanolamine 4 (H2L1) or N-(2,5-dimethylbenzyl)iminodiethanol 6 (H2L2) with calcium hydride followed by addition of a solution of iron(III) chloride, the neutral unoccupied coronands [Fe6Cl6(L1)6] (5) and [Fe6Cl6(L2)6] (7) were formed. Subsequent exchange of the chloride ions of 7 by bromide or thiocyanate ions afforded the ferric wheels [Fe6Br6(L2)6] (8) or [Fe6(NCS)6(L2)6] (9), respectively. Titration experiments of solutions of dianion (L1)2- with iron(III) chloride in THF revealed interesting mechanistic details about the self-assembling process leading to 5. At an iron/ligand ratio of 1:1.5 star-shaped tetranuclear [Fe[Fe(L1)2]3] (11) was isolated. However, at an iron/ligand ratio of 1:2, complex 11 was transformed into the ferric wheel 5. It was shown, that the interconversion of 5 and 11 is reversible. Based on the mechanistic studies, a procedure was developed which works for both the synthesis of homonuclear 11 and the star-shaped heteronuclear clusters [Cr[Fe(L1)2]3] (12) and [Al[Fe(L1)2]3] (13). The structures of all new compounds were determined unequivocally by single-crystal X-ray analyses.     

Bacillibactin-mediated iron transport in Bacillus subtilis

The hexadentate triscatecholamide bacillibactin delivers iron to Bacillus subtilis and is structurally similar to enterobactin, although in a more oblate conformation. B. subtilis uses two partially overlapping permeases (1 and 2) to acquire iron from its endogenous siderophores (bacillibactin and itoic acid). Enterobactin and bacillibactin have opposite metal chiralities, different affinity for ferric ion, and dissimilar iron transport behaviors. The solution thermodynamic stability of ferric bacillibactin has been investigated through potentiometric and spectrophotometric titrations. The addition of a glycine to the catechol chelating arms causes a destabilization of the ferric complex of bacillibactin compared to ferric enterobactin. B. subtilis appears to express a separate receptor for enterobactin (permease 3), although enterobactin can also be transported through the permease for bacillibactin (permease 2).     

Über die Hydrolyse von Eisen(III)-Salz-Lösungen. II Die Alterung der Hydrolyseprodukte

On the Hydrolysis of Iron (III) Salt Solutions. II. Ageing of Hydrolysis Products The long time ageing up to 15 years of the products obtained by alkalifying iron(III) chloride solutions to different neutralisation degrees has been studied. The concentration of the Fe³⁺ and the Cl- ions, the strength of the alkali, and the rate of its addition influence the results. Slow alkalifying produced up to 90% neutralisation β-FeOOH. The transformation of the amorphous iron(III) oxidehydroxide to β-FeOOH was promoted by a high concentration of the Cl- ions. When a large amount of amorphous iron(III) oxidehydroxide was formed, intimately intergrown crystals of α- and β-FeOOH resulted. On further ageing β-FeOOH transformed into α-FeOOH. At a degree of neutralisation of 95 and 100% transformation of the amorphous iron(III) oxidehydroxide into α-Fe₂O₃ occurred. The 100% neutralized precipitate, however, remained partly amorphous. Authors discuss the factors that determine very slow reactions leading to these results.     

Über die Hydrolyse von Eisen(III)Salzlösungen. I. Die Hydrolyse der Lösungen von Eisen(III)chlorid

When a very diluted iron(III)chloride solution is slowly alkalified by a weak base, the deprotonation of [Fe(H₂O)₆]³⁺ proceeds in a first stage to form mono- and dinuclear hydroxoaquo-complexes. In a second stage 4 dimers condense around a chloride ion to form an eight membered ring, an embryon, which grows fast to very small crystals of the composition Fe₄O₃(OH)₅Cl and the structure of the β-FeOOH. These crystalline micells remain colloidally dissolved. If the pH is raised above approximately 3.4 the Cl^?- are exchanged against OH^?-ions and flocculation occurs. This shows that Pauli, assuming the micells of such sols to be polynuclear complex ions, is basically correct, and it follows that micells can also be micro-crystals. When an iron(III)chloride solution is neutralized fast with a strong base, an ‘amorphous’ precipitation is obtained which gives with MoK_α-X-rays only two broad reflections, showing that the iron oxide hydroxide octahedra are condensed in a highly disordered way. The coherently scattering areas of this precipitate are probably tetramers. Small amounts of primarily formed amorphous iron(III)hydroxide are transformed into β-FeOOH.     

Simultaneous determination of ferric, ferrous and total iron by extraction differential pulse polarography: application to the speciation of iron in rocks

The voltammetric characteristics of Fe(III) oxinate at a mercury electrode, in the presence of 0.2 M tributylammonium perchlorate (tri-BAP) and 0.2 M tributylamine (tri-BA) as the supporting electrolyte have been studied in chloroform. With this supporting electrolyte a two electron quasi-reversible process for the reduction of Fe(III) oxinate was observed. Preceded by a solvent extraction of Fe(III) oxinate in chloroform, differential pulse polarography (DP) was used for the determination of iron. The calibration graph was linear over the concentration range 0.5–50 μM Fe(III) oxinate in chloroform and the detection limit was 1.5 μM. The proposed DP method has been used for the determination of ferric, ferrous and total iron in a mixture and successfully applied to the speciation of iron in rocks.     

New trends in the chemistry of iron(III) citrate complexes: correlations between X-ray structures and solution species probed by electrospray mass spectrometry and kinetics of iron uptake from citrate by iron chelators

Despite the crucial role of "iron(III) citrate systems" in the iron metabolism of living organisms (bacteria as well as plants or mammals), the coordination chemistry of ferric citrate remains poorly defined. Variations in the experimental conditions used for the preparation of so-called ferric citrates (iron salt, Fe:cit molar ratio, base, pH, temperature, solvent) lead to several different species, which are in equilibrium in solution. To date, six different anionic complexes have been structurally characterized in the solid state, by ourselves or others. In the work described herein, we have established the experimental conditions leading to each of them. Five were obtained from aqueous solution. With the exception of a nonanuclear species (of which fragments have been detected), all were identified in aqueous solution on the basis of electrospray ionization mass spectrometry. In addition, the spectra revealed a new trinuclear species, which could not be crystallized. Kinetic studies of iron uptake from citrate species by iron chelators confirmed the results indicated by the ESI-MS studies. These studies also allowed the relative molar fraction of mononuclear versus polynuclear complexes to be determined, which depends on the Fe:cit molar ratio.     

The synthesis of poly(hydroxamic acid) from poly(acrylamide)

Poly(hydroxamic acid) in gel or water soluble from was prepared from the reaction of poly(acrylamide) and hydroxylamine in basic aqueous solution (pH > 12) at room temperature. The polymers were composed of 70% hydroxamic acid groups, less than 5% carboxylic acid groups, and 25% unreacted amide groups. The polymers exhibited high affinity to iron(III) and copper(II) in the pH range of 1 to 5 with a high binding rate. A binding of 3 mmol/g for both metals was achieved. Preliminary tests demonstrated the urease inhibitory activity of both linear and crosslinked poly(hydroxamic acids).     

The influence of Al(III) supersaturation and NaOH concentration on the rate of crystallization of Al(OH)3 precursor particles from sodium aluminate solutions

The growth kinetics of colloidal Al(III)-containing particles (diameter<1000 nm), nucleated in optically clear, supersaturated sodium aluminate solutions as a precursor to Al(OH)(3) crystals, has been studied using dynamic light scattering. Two series of solutions were examined at 22 degrees C to determine the influence of Al(III) supersaturation and NaOH concentration on the initial particle growth behavior. One solution series consisted of solutions with constant Al(III) absolute supersaturation (DeltaC) of 1.48 M and [NaOH] range 1.83-4.00 M ([NaOH]/[Al(III)]=1.13-2.15) and Al(III) relative supersaturation (sigma)=3.86-10.36. The other solution series had a constant sigma of 7.55 and [NaOH] range of 1.50-4.27 M ([NaOH]/[Al(III)]=1.18-1.54) and DeltaC=0.86-3.19. The correlation between the initial particle growth rates and supersaturation (DeltaC or sigma) revealed marked anomalies over the entire supersaturation range studied. The growth rate remained substantially constant in the DeltaC range 0.86-2.55 M (for the constant sigma solution series), before increasing sharply upon a further increase of DeltaC beyond 2.55 M. The variation of the growth rate with sigma in the range 3.86-9.00 (for the constant DeltaC solution series) was remarkably weak, contrary to expectation. At higher sigma (>9.00), however, a marked increase in growth rate with increasing sigma was displayed. At constant DeltaC or sigma, the growth rate showed a strong variation with NaOH concentration, indicating that Na(+) and OH(-) species play a pivotal role in the Al(OH) precursor particles (nuclei) growth process. Furthermore, the kinetics of growth displayed by these nanosized particles are an order of magnitude slower than those observed for macroscopic gibbsite (gamma-Al(OH)(3)) crystals at similar supersaturations and temperature. The difference may be rationalized in terms of particle size and Al(OH)(3) dimorphic phase dependent solubility effects. An empirically adequate growth kinetics modeling was achieved when the growth rates were correlated with the Al(III) supersaturation (DeltaC or sigma) and the excess (free) NaOH concentration, rather than the former alone, as is commonly the case. A critical [NaOH]/[Al(III)] molar ratio of 1.27-1.35, below which the particle growth rate increased markedly and above which the rate was significantly reduced, was observed. This behavior is believed to be linked to solution speciation change that occurs at certain Al(III) and NaOH compositions.     

Analytical aspects of some organic acids

Summary Back titrimetric procedures for the estimation of aluminium, zirconium, and thorium have been developed, which involved the adjustment of the concentration of the metallic salts, concentration of EDTA,ph, and temperature, addition of indicator solution (namely, 2-hydroxy3-naphthoic acid and back titration with standard 0.1 M ferric chloride solution. This method is based on the fact that the excess EDTA, which is added to the metal solutions may be back titrated with iron(III), which forms a highly coloured complex with the indicator, when present in slight excess. Quantities of aluminium, zirconium and thorium as small as 10.8, 4.6, 11.6 mg respectively, can be back titrated with in experimental error, when present in a volume of 100 ml.Part IV: See Z. analyt. Chem. 172, 356 (1960).     

Formation and transformation of Al<Subscript>13</Subscript> from freshly formed precipitate in partially neutralized Al(III) solution

Al₁₃ is one of the novel nanospecies in partially neutralized Al(III) solution and Al-OH sol or precipitate could be generated simultaneously in the neutralization. Unfortunately, the precipitate is believed to be harmful to the formation of Al₁₃ due to the consumption of Al(OH)₄ ⁻, which was regarded as the precursor of Al₁₃. In this paper, the feasibility and potential of transformation of freshly formed Al-OH precipitate into Al₁₃ species were studied by using ferron colorimetric method and ²⁷Al NMR spectroscopy. The Al-OH precipitates were produced by two ways: injection of base solution into Al(III) solution gradually and mixing of Al(III) and base solutions instantaneously. The re-dissolving behaviors of the freshly formed precipitates were examined under different basicities (OH/Al molar ratio) and temperatures. It has been shown that Al₁₃ could be formed through the re-dissolution of intermediate Al-OH precipitate generated in partially neutralized Al(III) solution. A possible formation mechanism of Al₁₃ was suggested. Easily transformable precipitate was developed when the OH/Al molar ratio was less than 2.5. Rapid re-dissolution of freshly formed precipitate was favorable for Al₁₃ formation, which could be enhanced by heating.     

Framed aromatic polyurethanes based on an anionic macroinitiator, 4,4'-diphenylmethane diisocyanate,and 4,4'-dihydroxy-2,2-diphenylpropane: Metal-complex modification

Metal complexes are prepared from poly(oxyethylene glycol) and iron(III) chloride and studied as modifiers of framed aromatic polyurethanes. The latter polymers are synthesized on the basis of macroinitiators, 4,4'-dihydroxy-2,2-diphenylpropane, and polyisocyanate, which is a mixture of 4,4'-diphenylmethane diisocyanate and its branched derivatives. The interaction of iron(III) chloride with poly(oxyethylene glycol) is accompanied by redox processes that lead to its degradation and partial reduction of Fe(III) to Fe(II). Aromatic polyurethanes are modified in the concentration range of metal complexes from 0.5 to 20%. At a concentration of metal complexes of 4–7%, the polymer shows high mechanical characteristics and excellent thermal stability. The framed structure of aromatic polyurethanes hampers the effective contacts of coordinately bonded Fe atoms that are present in various oxidation states.     

An efficient and selective flourescent chemical sensor based on 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a new fluoroionophore for determination of iron(III) ions. A novel probe for iron speciation

A novel fluorescent chemical sensor for the highly sensitive and selective determination of Fe³⁺ ions in aqueous solutions is prepared. The iron sensing system was prepared by incorporating 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane (L) as a neutral Fe³⁺-selective fluoroionophore in the plasticized PVC membrane containing sodium tetraphenylborate as a liphophilic anionic additive. The response of the sensor is based on the strong fluorescence quenching of L by Fe³⁺ ions. At pH 5.5, the proposed sensor displays a calibration curve over a wide concentration range from 6.0 × 10⁻⁴ to 1.0 × 10⁻⁷ M, with a relatively fast response time of less than 2 min. In addition to a high stability and reproducibility, the sensor shows a unique selectivity toward Fe³⁺ ion with respect to common coexisting cations. The proposed fluorescence optode was applied to the determination of iron(III) content of straw of rice, spinach and different water samples. The fluorescent sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

Deferoxamine B: A Natural,Excellent and Versatile Metal Chelator

Deferoxamine B is an outstanding molecule which has been widely studied in the past decade for its ability to bind iron and many other metal ions. The versatility of this metal chelator makes it suitable for a number of medicinal and analytical applications, from the well-known iron chelation therapy to the most recent use in sensor devices. The three bidentate hydroxamic functional groups of deferoxamine B are the centerpiece of its metal binding ability, which allows the formation of stable complexes with many transition, lanthanoid and actinoid metal ions. In addition to the ferric ion, in fact, more than 20 different metal complexes of deferoxamine b have been characterized in terms of their chemical speciation in solution. In addition, the availability of a terminal amino group, most often not involved in complexation, opens the way to deferoxamine B modification and functionalization. This review aims to collect and summarize the available data concerning the complex-formation equilibria in solutions of deferoxamine B with different metal ions. A general overview of the progress of its applications over the past decade is also discussed, including the treatment of iron overload-associated diseases, its clinical use against cancer and neurodegenerative disorders and its role as a diagnostic tool.     

Reactive oxygen species formation by UV-A irradiation of urocanic acid and the role of trace metals in this chemistry

We have extended our study of the decomposition of urocanic acid (UCA) with ultraviolet A radiation (UV-A) by the self-sensitized generation of singlet oxygen (see Photochem. Photobiol. 75, 565 [2002]). The chemistry has been found to be partially dependent on the presence of trace metal, most likely iron. Rigorous removal of metal impurities from the reaction mixture, using Chelex, retarded (but did not eliminate) the UV-A-initiated UCA degradation. The addition of small amounts of ferric chloride to the Chelex-treated solutions restored reactivity. Chelex treatment had a modest effect on the previously reported ability of UCA photoproducts to photonick supercoiled plasmid DNA. Also, photoinactivation of Sindbis virus on irradiation with the UCA photoproducts is now reported. Inactivation of the virus by a photoproduct mixture derived from a UCA solution that had been pretreated with Chelex was less rapid and gave better behaved time-course plots than was observed for photoproducts from non-Chelex treated solutions. These results are particularly noteworthy in light of the ubiquitous presence of both UCA and iron in the skin.     

Direct incorporation of a ferric ion in the porphyrinogen core: tetrakis(cyclohexyl)iron porphyrinogen anion with different conformers and its reaction with iodine

Et(4)N[L' 'Fe(III)].3DCM (1) is directly synthesized by adding ferric chloride into a solution of a lithium salt of tetrakis(cyclohexyl)porphyrinogen (L' '). [L' '](4-) is a good chelating ligand for both Fe(III) and Fe(II) ions. It is an avid proton scavenger but not a reducing agent. 1 showed a magnetic moment (mu(eff)) of 4.3 micro(B) in the solid, which changed to 6.0 micro(B) in solution. This change in spin state is common for all iron porphrinogens. 1 showed polymorphism, and with pyridine in the lattice, it changed to Et(4)N[L' 'Fe(III)].DCM(0.5)Py(1.5) (2), possessing two different conformers. Calculation of these conformers at the density functional theory level showed the relative energies of all d orbital changes in three conformers, highlighting the influence of the disposition of a peripheral ligand. Iodine oxidation of 1 yielded [L' '(DeltaDelta)Fe(II)I][I(3).I(2)(+).I(3)(-)] (3) with the introduction of two C(alpha)-C(alpha) bonds with concomitant reduction of Fe(III) to Fe(II). Its mu(eff) (5.4 mu(B)) in the solid changed to 4.8 micro(B) in solution, suggesting a high spin state (S = 2) for Fe(II).     

Intradiffusion and viscosity measurements in acidified iron(III) chloride solutions at 25°C

Intradiffusion of species in acidified (using eithe hydrochloric or perchloric acid) iron(III) chloride solutions has been studied using labeled iron(III), chloride and water. Comparison with data for iron(III) perchlorate has enabled the influence of complexed species upon the diffusion to be ascertained. The chloro-iron species formed have larger diffusion coefficients than the free iron(III) ion as would be expected from their lower net charge. Simple diffusion models have been employed to enable estimates of the diffusion of the complexed species and of the free chloride diffusion coefficients to be obtained. These are discussed in relation to literature data for similar systems. In addition esitmates of the effective hydration of the iron(III) species in solutions have been obtained from the diffusion data. These are discussed in relation to two other trivalent metal salt systems, chromium chloride and lanthanum chloride; the overall hydration of the three cations is virtually identical.