首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
CO2的化学转化具有环境及科学双重研究意义.CO2具有很高的化学稳定性,加氢还原是一种有效的转化途径.其中将CO2选择性还原为CO,即逆水汽变换(RWGS)反应(CO2+H2→CO+H2O),具有重要的理论意义和应用价值:(1)CO作为合成气的重要原料,可以通过F-T合成生产更有价值的液体燃料;(2)H2可通过可再生能源电解水制取,实现了全过程的零排放碳循环利用.从热力学角度分析,RWGS反应是一个吸热反应,高温有利于平衡转化率的提高.从动力学角度,一个对正反应有活性的催化剂可同时催化逆反应进行.可还原性载体负载贵金属催化剂,如Pt/CeO2,Au/FeOx,Au/CeO2等,具有很好的低温WGS催化活性,但它们在RWGS反应上的研究较少.我们制备了CeO2负载纳米Au催化剂(HRTEM表征结果表明金高度分散于CeO2载体表面,粒径为4-5 nm),其在常压CO2加氢还原为CO反应中表现出优异的低温活性,分别在450℃,CO2/H2=1,WHSV=12000 mL/(h·g),及400℃,H2/CO2=1,WHSV=6000 mL/(h·g)条件下,CO2转化率接近平衡转化率,且CO的选择性为100%.随着H2/CO2比例增加,CO2转化率明显提高,且维持H2/CO2为1的化学计量比反应.通过原位漫反射红外光谱与质谱相结合的技术,研究了Au/CeO2催化剂上的RWGS反应路径:Au/CeO2催化剂表面形成了甲酸盐中间物种,它的消耗伴随着CO和H2O产物的生成.说明Au/CeO2催化剂遵循中间体机理,这应该是其具有优异低温RWGS反应性能的微观机制.  相似文献   

2.
采用液相还原法制备非负载型镍催化剂,将非负载型镍催化剂分散在液相供氢溶剂十氢萘中,催化合成气甲烷化反应。在高压反应釜内,考察了反应温度、物质的量比等操作条件下,镍催化剂催化合成气甲烷化反应的反应活性。并对催化剂进行XRD、SEM、H2-TPR表征分析。研究结果表明,在330℃、催化剂用量为2%时,产品气中甲烷含量可达89.39%,CO和H2的转化率分别为94.56%和92.60%;催化剂用量为4%时,产品气中甲烷含量可高达94.26%,CO的转化率可达到99%以上。合成气甲烷化反应的最佳操作温度为330℃,H2/CO物质的量比最佳为2.20~2.67。  相似文献   

3.
吕功煊 《分子催化》2015,29(2):152-163
用共沉淀法和浸渍法制备了一系列过渡金属复合物催化剂Kx/Cu-Fe-Zn,通过对催化剂进行了BET,H2-TPR,XRD,XPS,TEM等一系列物理化学性质的表征来探究了助剂K对催化剂的比表面积、还原行为、结构特性以及形貌等方面的影响.在固定床反应器上研究了碱金属助剂K的浸渍量以及温度对CO2加氢反应的催化活性,稳定性以及对产物分布的影响.研究发现,当温度为350℃,助剂K的浸渍量为K0.1/Cu-Fe-Zn时,催化剂的催化活性达到最高,CO2的转化率可以达到68.7%,进一步增加催化剂中K的含量时,催化剂的催化活性出现缓慢下降趋势.研究还发现随着助剂K的浸渍量的增加,CO2加氢反应中大分子量化合物增加,碳链增长,并且有大量高级醇和含氧化合物的形成.我们还讨论了在助剂K存在下催化剂上CO2加氢反应机理.  相似文献   

4.
用共沉淀法和浸渍法制备了一系列过渡金属复合物催化剂Kx/Cu-Fe-Zn,通过对催化剂进行了BET,H2-TPR,XRD,XPS,TEM等一系列物理化学性质的表征来探究了助剂K对催化剂的比表面积、还原行为、结构特性以及形貌等方面的影响.在固定床反应器上研究了碱金属助剂K的浸渍量以及温度对CO2加氢反应的催化活性,稳定性以及对产物分布的影响.研究发现,当温度为350℃,助剂K的浸渍量为K0.1/Cu-Fe-Zn时,催化剂的催化活性达到最高,CO2的转化率可以达到68.7%,进一步增加催化剂中K的含量时,催化剂的催化活性出现缓慢下降趋势.研究还发现随着助剂K的浸渍量的增加,CO2加氢反应中大分子量化合物增加,碳链增长,并且有大量高级醇和含氧化合物的形成.我们还讨论了在助剂K存在下催化剂上CO2加氢反应机理.  相似文献   

5.
在常温常压条件下 ,利用电晕放电 ,使 CH4 - CO2 混合气转化生成合成气 .结果表明 ,该过程中 CH4 和 CO2 的转化率与反应体系能量密度、原料气配比和流速等有关 .在 0 .1MPa气压 ,能量密度为 10 50 k J/ mol(反应体系温度低于 50 0 K) ,n( CH4 )∶ n( CO2 ) =1∶ 2条件下 CH4 和 CO2 的转化率分别超过 60 %和 50 % ,超出了热力学平衡转化率的限制 .通过调配原料的配比 ,可以得到不同 n( H2 ) / n( CO)比值的产物 .对该体系的反应机理进行了探讨 .  相似文献   

6.
以无水乙醇为溶剂,草酸为沉淀剂,采用悬浮共沉淀法,一步合成CuO-ZnO-Al2O3/HZSM-5双功能催化剂.并研究了该催化剂在CO2加氢合成二甲醚反应中的催化性能,考察了CO2加氢合成甲醇组分(CuO-ZnO-Al2O3)与甲醇脱水组分(HZSM-5)配比对催化剂性能的影响以及催化剂的稳定性.结果表明,双功能催化剂加氢与脱水组分配比为8∶1时,对CO2加氢直接合成二甲醚有较高的催化性能:在固定床反应器中,温度为270℃,压力为3.0 MPa,空速为4 800 h-1的反应条件下,CO2的单程转化率达到29.8%,二甲醚的选择性和收率分别达到53.8%和16%.XRD、BET、TPR和NH3-TPD对催化剂结构表征结果表明,不同组分配比影响双功能复合催化剂中脱水组分的酸性和加氢组分的结晶度、晶粒尺寸、CuO的还原性.  相似文献   

7.
采用浸渍法和溶胶凝胶法制备了CuO/CeO2-ZrO2/SiC整体催化剂,并将其用于甲醇水蒸气重整制氢反应中。结果表明,与CuO/CeO2-ZrO2颗粒催化剂相比,CuO/CeO2-ZrO2/SiC整体催化剂催化活性较好,产氢速率较快且重整气中CO体积分数较低。进一步探究了涂层涂覆量和CuO负载量对催化性能的影响,结果表明,当CeO2-ZrO2复合氧化物涂层涂覆量在15%±1%,CuO负载量为5%±1%时,催化性能较好;当反应温度为340℃,水醇物质的量比为1. 2,甲醇水蒸气气体空速为4840 h-1时,甲醇转化率为86. 0%,产氢速率为1490. 0 L/(m3·s),重整气中CO体积分数为1. 55%。最后通过单因素实验法探究了甲醇水蒸气气体空速、水醇物质的量比和反应温度对反应的影响。结果表明,随着气体空速变大,甲醇转化率下降,产氢速率上升,重整气中CO体积分数下降。随着水醇物质的量比增加,甲醇转化率先上升后下降,产氢速率先上升后下降,重整气中CO体积分数下降。随着反应温度的升高,甲醇转化率、产氢速率和重整气中CO体积分数均上升。  相似文献   

8.
甲烷氧化偶联制烯烃的热力学平衡限度   总被引:3,自引:0,他引:3  
选择适宜的热力学模型对甲烷氧化偶联制烯烃体系的热力学平衡进行分析,考察温度﹑压力﹑进料组成对体系组分的平衡限度影响。研究发现,在甲烷氧化偶联制烯烃体系中,H2、CO的生成相对容易,C2产物(C2H4、C2H6)不容易生成。通过计算,得到了该体系有利于烯烃生成的反应条件,500℃~800℃、1.5MPa、烷氧摩尔比为7。实验为甲烷氧化偶联反应器和催化剂的开发研究提供热力学依据。  相似文献   

9.
CO_2的化学转化具有环境及科学双重研究意义.CO_2具有很高的化学稳定性,加氢还原是一种有效的转化途径.其中将CO_2选择性还原为CO,即逆水汽变换(RWGS)反应(CO_2+H_2→CO+H_2O),具有重要的理论意义和应用价值:(1)CO作为合成气的重要原料,可以通过F-T合成生产更有价值的液体燃料;(2)H_2可通过可再生能源电解水制取,实现了全过程的零排放碳循环利用.从热力学角度分析,RWGS反应是一个吸热反应,高温有利于平衡转化率的提高.从动力学角度,一个对正反应有活性的催化剂可同时催化逆反应进行.可还原性载体负载贵金属催化剂,如Pt/Ce O_2,Au/Fe Ox,Au/Ce O_2等,具有很好的低温WGS催化活性,但它们在RWGS反应上的研究较少.我们制备了Ce O_2负载纳米Au催化剂(HRTEM表征结果表明金高度分散于Ce O_2载体表面,粒径为4–5 nm),其在常压CO_2加氢还原为CO反应中表现出优异的低温活性,分别在450°C,CO_2/H2=1,WHSV=12000 m L/(h·g),及400°C,H_2/CO_2=1,WHSV=6000 m L/(h·g)条件下,CO_2转化率接近平衡转化率,且CO的选择性为100%.随着H2/CO_2比例增加,CO_2转化率明显提高,且维持H_2/CO_2为1的化学计量比反应.通过原位漫反射红外光谱与质谱相结合的技术,研究了Au/Ce O_2催化剂上的RWGS反应路径:Au/Ce O_2催化剂表面形成了甲酸盐中间物种,它的消耗伴随着CO和H_2O产物的生成.说明Au/Ce O_2催化剂遵循中间体机理,这应该是其具有优异低温RWGS反应性能的微观机制.  相似文献   

10.
用光还原法来提高富氢条件下CO优先氧化(PROX)催化活性和CO2选择性,分别对有无氢气时CO氧化反应参数进行了详尽研究.X射线光电子能谱(XPS)表征结果显示,在光还原催化剂表面产生了部分氧空穴,可为化学吸附H提供活性中心.针对光还原Pt/TiO2催化剂上CO优先氧化反应提出了一种可能的双功能反应机理.  相似文献   

11.
The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.  相似文献   

12.
非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。  相似文献   

13.
翟宗玺  刘树深  夏树屏 《化学学报》1990,48(10):946-950
用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。  相似文献   

14.
Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.  相似文献   

15.

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

  相似文献   

16.
Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.  相似文献   

17.
In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.  相似文献   

18.
Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, Mo, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.  相似文献   

19.
20.
The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe2O3. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号