Enhancing electrochromic contrast and redox stability of nanostructure polypyrrole film doped by heparin as polyanion in different solvents

Heparin‐doped polypyrrole (PPy‐Hep) and ‐doped polypyrrole (PPy‐ClO₄) films are synthesized onto FTO‐coated glass electrode in a potentiostatic electrochemical process with the aim of producing uniform, transparent, and adherent coating. The resultant polymers are characterized via cyclic voltammetry, scanning electron microscopy (SEM), and UV–vis absorption spectroscopy. SEM study indicates that the PPy‐Hep film to be composed of a continuous interlinked network of quasi spherical grains (50–80 nm in dimensions). The electrochromic properties of PPy‐Hep and PPy‐ClO₄ polymer films are compared to spectroelectrochemistry and switching studies. The effect of different solvents (water, propylene carbonate, and acetonitrile) on the electrochromic features of electropolymerized polymers has been investigated, and we find a very significant solvent effect. PPy‐Hep film exhibits switching time of 1 s and the maximum transmittance contrast (ΔT%) is 48% at 800 nm in water. In addition, presence of Hep causes drastic enhancement of electro‐optical stability of PPy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3365–3371     

Facile fabrication of redox‐active and electrochromic poly(amide‐amine) films through electrochemical oxidative coupling of arylamino groups

Two novel electropolymerizable monomers, namely 3,5‐bis(4‐diphenylaminobenzamido)‐N‐[4‐(carbazol‐9‐yl)phenyl]benzamide ( 5 ) and 3,5‐bis(4‐diphenylaminobenzamido)‐N‐[4‐(3,6‐dimethoxycarbazol‐9‐yl)phenyl]benzamide ( 5‐MeO ), were synthesized, and their electrochemical properties were studied by cyclic voltammetry. The electron‐withdrawing amide groups efficiently blocked the radical cations delocalization between the two terminal TPA groups, rendering the electropolymerization of the TPA groups feasible. The polymer electrodeposited from monomer 5 could be further crosslinked through electro‐coupling of the carbazole groups, which showed both electrochromic and fluorescent properties (the emission of blue light (460 nm) in solid state). Both of the electro‐generated polymer films derived from 5 and 5‐MeO showed reversible electrochemical oxidation processes in the range of 0 ? 1.4 V with strong color changes and high contrast ratios in the visible and NIR regions upon electro‐oxidation. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. 2016, 54, 2476–2485     

Synthesis,photoluminescence, and electrochromism of polyamides containing (3,6‐di‐tert‐butylcarbazol‐9‐yl)triphenylamine units

A new carbazole‐derived, triphenylamine (TPA)‐containing aromatic dicarboxylic acid monomer, 4,4′‐dicarboxy‐4″‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)TPA, was synthesized, and it led to a series of electroactive aromatic polyamides with main‐chain TPA and pendent 3,6‐bis(tert‐butyl)carbazole units by reacting it with various aromatic diamines via the phosphorylation polyamidation technique. The polyamides were amorphous with good solubility in many organic solvents and could be solution‐cast into flexible and strong films. They showed high glass‐transition temperatures (282–335 °C) and high thermal stability (10% weight loss temperatures >480 °C). The electroactive polymer films had well‐defined and reversible redox couples with good cycle stability in acetonitrile solutions. The polymer films also exhibited fluorescent and multielectrochromic behaviors. The anodically electrochromic polyamide films had moderate coloration efficiency (～100 cm²/C) and high optical contrast ratio of transmittance change (Δ%T) up to 47% at 813 nm and 48% at 414 nm for the green coloring. After hundreds of cyclic switches, the polymer films still retained good redox and electrochromic activity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and electrochromic properties of a new family of methacrylate polymers containing pendant oligothiophenes

A new family of methacrylate polymers containing pendant terthiophene, quaterthiophene, quinquethiophene, and sexithiophene was synthesized by the radical polymerization of the corresponding methacrylate monomers, and the electrochemical and electrochromic properties were investigated. The anodic oxidation of these polymers in the presence of tetra‐n‐butylammonium perchlorate as a supporting electrolyte produced radical‐cation salts of pendant oligothiophenes with ClO as a dopant. The electrochemically oxidized polymers had partially crosslinked structures resulting from the coupling reaction of pendant oligothiophene radical cations, the extent of crosslinking significantly decreasing with the increasing conjugation length of the pendant oligothiophenes. Comparative spectroelectrochemical studies of the monomers in solution and the polymers as solid films showed that π‐dimer formation of oligothiophene radical cations took place more readily for the polymer films than for the monomers in solution. This new family of methacrylate polymers containing pendant oligothiophenes constitutes a new class of potential electrochromic materials, undergoing reversible, clear color changes on electrochemical oxidation and reduction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2471–2484, 2003     

Novel thermally stable poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s for luminescent and electrochromic materials

We describe the preparation, characterization, and luminescence of four novel electrochromic aromatic poly(amine hydrazide)s containing main‐chain triphenylamine units with or without a para‐substituted N,N‐diphenylamino group on the pendent phenyl ring. These polymers were prepared from either 4,4′‐dicarboxy‐4″‐N,N‐diphenylaminotriphenylamine or 4,4′‐dicarboxytriphenylamine and the respective aromatic dihydrazide monomers via a direct phosphorylation polycondensation reaction. All the poly(amine hydrazide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent and flexible films with good mechanical properties. These poly(amine hydrazide)s exhibited strong ultraviolet–visible absorption bands at 346–348 nm in N‐methyl‐2‐pyrrolidone (NMP) solutions. Their photoluminescence spectra in NMP solutions or as cast films showed maximum bands around 508–544 and 448–487 nm in the green and blue region for the two series of polymers. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. All obtained poly(amine hydrazide)s and poly(amine‐1,3,4‐oxadiazole)s exhibited two reversible oxidation redox couples at 0.8 and 1.24 V vs. Ag/AgCl in acetonitrile solution and revealed excellent stability of electrochromic characteristics, changing color from original pale yellow to green and then to blue at electrode potentials of 0.87 and 1.24 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3245–3256, 2005     

Novel family of triphenylamine‐containing,hole‐transporting,amorphous, aromatic polyamides with stable electrochromic properties

We report the preparation and characterization of a series of novel electrochromic, aromatic poly(amine amide)s with pendent triphenylamine units. The synthesis proceeded via direct phosphorylation polycondensation between a novel diamine, N,N‐bis(4‐aminophenyl)‐N′,N′‐diphenyl‐1,4‐phenylenediamine, and various aromatic dicarboxylic acids. All the poly(amine amide)s were amorphous and readily soluble in many common organic solvents and could be solution‐cast into transparent, tough, and flexible films with good mechanical properties. They exhibited good thermal stability and 10% weight‐loss temperatures above 540 °C. Their glass‐transition temperatures were 263–290 °C. These polymers in N‐methyl‐2‐pyrrolidinone solutions exhibited strong ultraviolet–visible absorption peaks at 307–358 nm and photoluminescence peaks around 532–590 nm in the green region. The hole‐transporting and electrochromic properties were studied with electrochemical and spectroelectrochemical methods. Cyclic voltammograms of poly(amine amide) films prepared by the casting of polymer solutions onto an indium tin oxide coated glass substrate exhibited two reversible oxidation redox couples at 0.65 and 1.03 V versus Ag/AgCl in an acetonitrile solution. All the poly(amine amide)s showed excellent stability with respect to their electrochromic characteristics; the color of the films changed from pale yellow to green and then blue at 0.85 and 1.25 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2085–2098, 2005     

Synthesis of a new class of triphenylamine‐containing poly(ether‐imide)s for electrochromic applications

A novel triphenylamine (TPA)‐containing bis(ether anhydride) monomer, namely 4,4′‐bis(3,4‐dicarboxyphenoxy)triphenylamine dianhydride, was synthesized and reacted with various aromatic diamines leading to a series of new poly(ether‐imide)s (PEI). Most of these PEIs were soluble in organic solvents and could be easily solution cast into flexible and strong films. The polymer films exhibited good thermal stability with glass‐transition temperatures in the range 211–299 °C. The polymer films exhibited reversible electrochemical processes and stable color changes (from transparent to navy blue) with high coloration efficiency and contrast ratio upon electro‐oxidation. During the electrochemical oxidation process, a crosslinked polymer structure was developed due to the coupling reaction between the TPA radical cation moieties in the polymer chains. These polymers can be used to fabricate electrochromic devices with high coloration efficiency, high redox stability, and fast response time. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 825–838     

New polyimides incorporated with diphenylpyrenylamine unit as fluorophore and redox‐chromophore

A series of novel polyimides based on N,N‐di(4‐aminophenyl)‐1‐aminopyrene and aromatic or alicyclic tetracarboxylic dianhydrides were synthesized. The polymers exhibited good solubility in many polar organic solvents and could afford robust films via solution casting. The polyimides derived from aromatic dianhydrides exhibited high thermal stability and high glass‐transition temperatures (333–364 °C). Cyclic voltammetry studies of the polymer films showed that these polyimides are both p and n dopable and have multicolored electrochromic states. For the polyimides derived from alicyclic dianhydrides, they revealed a strong blue‐light emission with high fluorescence quantum yields (?_PL > 45%) and a marked solvatochromic behavior. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Substituent effects on electrochemical and electrochromic properties of aromatic polyimides with 4‐(carbazol‐9‐yl)triphenylamine moieties

Three series of aromatic polyimides with 4‐(carbazol‐9‐yl)triphenylamine moieties were prepared from the polycondensation reactions of 4,4′‐diamino‐4″‐(carbazol‐9‐yl) triphenylamine (1), 4,4′‐diamino‐4″‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)triphenylamine (t‐Bu‐1), and 4,4′‐diamino‐4″‐(3,6‐dimethoxycarbazol‐9‐yl)triphenylamine (MeO‐1), respectively, with various commercially available tetracarboxylic dianhydrides. In addition to high thermal stability and good film‐forming ability, the resulting polyimides exhibited an ambipolar electrochromic behavior. The polyimides based on t‐Bu‐1 and MeO‐1 revealed higher redox‐stability and enhanced electrochromic performance than the corresponding ones based on 1 because the active sites of their carbazole units are blocked with bulky t‐butyl or electron‐donating methoxy groups. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1172–1184     

Synthesis and self‐assembly of hyperbranched polymers with benzoyl terminal arms

Hyperbranched polyesters (HPs) with a variable content of benzoyl terminal groups were synthesized through the chemical modification of the HPs' cores by substituting a controlled fraction of the terminal hydroxyl groups with benzoyl chloride. The resulting hyperbranched polymers that were modified by benzoyl groups (HPs‐B) were characterized by ¹H NMR, FTIR, differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Research results revealed that self‐assembled structures could be formed in selected solvents (acetone/n‐hexane). It was found that the morphologies of self‐assembled structures could be adjusted by controlling the content of outside benzoyl terminal groups in the hyperbranched polymers, the volume ratio of acetone with n‐hexane, and the concentration of the hyperbranched polymers with benzoyl terminal arms. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5554–5561, 2005     

New electroactive and electrochromic aromatic polyamides with ether‐linked bis(triphenylamine) units

A new class of electroactive polyamides with ether‐linked bis(triphenylamine) [O(TPA)₂] units were prepared through the direct phosphorylation polycondensation from N,N‐di(4‐aminophenyl)‐N′,N′‐diphenyl‐4,4′‐oxydianiline and aromatic dicarboxylic acids. These polyamides were amorphous with good solubility in many organic solvents, such as NMP and DMAc, and could be solution‐cast into strong and flexible polymer films. Their decomposition temperatures (T_d) at a 10% weight‐loss in nitrogen and air were recorded at 556–568 °C and 537–555 °C, respectively. The glass‐transition temperatures (T_g) of all the polyamides were observed in the range of 218?253 °C by DSC. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at 0.80–0.82 V and 0.96–0.98 V versus Ag/AgCl in an electrolyte containing acetonitrile solution. The polyamide films showed excellent electrochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and purple oxidized forms at applied potentials ranging from 0 to 1.2 V. These polymers can also be used to fabricate electrochromic devices, and they showed high coloration efficiency, high redox stability, and fast response time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 496–510     

Novel organosoluble aromatic polyimides bearing pendant methoxy‐substituted triphenylamine moieties: Synthesis,electrochromic, and gas separation properties

Four series of polyimides I – VI with pendent triphenylamine (TPA) units having inherent viscosities of 0.44–0.88 dL/g were prepared from four diamines with two commercially available tetracarboxylic dianhydrides via a conventional two‐step procedure that included a ring‐opening polyaddition to give polyamic acids, followed by chemical cyclodehydration. These polymers were amorphous and could afford flexible films. All the polyimides had useful levels of thermal stability associated with high softening temperatures (279–300 °C), 10% weight‐loss temperatures in excess of 505 °C, and char yields at 800 °C in nitrogen higher than 58%. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the polyimide films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited a or two reversible oxidation couples at 0.65–0.78 and 1.00–1.08 V versus Ag/AgCl in acetonitrile solution. The polymer films revealed electrochromic characteristics with a color change from neutral pale yellowish to blue doped form at applied potentials ranging from 0.00 to 1.20 V. The CO₂ permeability coefficients (P) and permeability selectivity (P/P) for these polyimide membranes were in the range of 4.73–16.82 barrer and 9.49–51.13, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7937–7949, 2008     

Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

Low potential electrosyntheses of free‐standing poly(dibenzofuran) films in mixed electrolytes of boron trifluoride diethyl etherate and trifluoroacetic acid

Free‐standing poly(dibenzofuran) (PDBF) films were synthesized electrochemically by direct anodic oxidation of dibenzofuran in mixed electrolytes of boron trifluoride diethyl etherate (BFEE) containing certain amount of trifluoroacetic acid (TFA). The oxidation potential of dibenzofuran in pure BFEE was measured to be only 1.31 V versus saturated calomel electrode (SCE). This value was much lower than that determined in acetonitrile + 0.1 mol L^?1 TBATFB (2.14 V vs. SCE). The addition of TFA to BFEE can further decrease the oxidation potential of the monomer to 1.07 V versus SCE in the mixed electrolyte of BFEE + 30% TFA. PDBF films obtained from this medium showed good electrochemical behavior, good electrochromic properties, and good thermal stability with conductivity of 10⁰ S cm^?1. FTIR and ¹H NMR spectra showed that the polymer was grown mainly via the coupling of the monomer at C₍₃₎ C₍₁₀₎ or C₍₄₎ C₍₉₎ positions (Scheme 1). As‐formed PDBF films were partly soluble in tetrahydrofuran (THF) or chloroform. Fluorescent spectral studies indicated that either soluble or PDBF in solid state was a good blue light PDBF emitter. To the best of our knowledge, this is the first report that free‐standing PDBF films can be electrodeposited. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1125–1135, 2006     

Highly stable electrochromic polyamides based on N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new triphenylamine‐containing aromatic diamine monomer, N,N‐bis(4‐aminophenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was synthesized by an established synthetic procedure from readily available reagents. A novel family of electroactive polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenyl‐1,4‐phenylenediamine units were prepared via the phosphorylation polyamidation reactions of the newly synthesized diamine monomer with various aromatic or aliphatic dicarboxylic acids. All the polymers were amorphous with good solubility in many organic solvents, such as N‐methyl‐2‐pyrrolidinone (NMP) and N,N‐dimethylacetamide, and could be solution‐cast into tough and flexible polymer films. The polyamides derived from aromatic dicarboxylic acids had useful levels of thermal stability, with glass‐transition temperatures of 269–296 °C, 10% weight‐loss temperatures in excess of 544 °C, and char yields at 800 °C in nitrogen higher than 62%. The dilute solutions of these polyamides in NMP exhibited strong absorption bands centered at 316–342 nm and photoluminescence maxima around 362–465 nm in the violet‐blue region. The polyamides derived from aliphatic dicarboxylic acids were optically transparent in the visible region and fluoresced with a higher quantum yield compared with those derived from aromatic dicarboxylic acids. The hole‐transporting and electrochromic properties were examined by electrochemical and spectro‐electrochemical methods. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide‐coated glass substrate exhibited two reversible oxidation redox couples at 0.57–0.60 V and 0.95–0.98 V versus Ag/AgCl in acetonitrile solution. The polyamide films revealed excellent elcterochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and blue oxidized forms at applied potentials ranging from 0.0 to 1.2 V. These anodically coloring polymeric materials showed interesting electrochromic properties, such as high coloration efficiency (CE = 216 cm²/C for the green coloring) and high contrast ratio of optical transmittance change (ΔT%) up to 64% at 424 nm and 59% at 983 nm for the green coloration, and 90% at 778 nm for the blue coloration. The electroactivity of the polymer remains intact even after cycling 500 times between its neutral and fully oxidized states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2330–2343, 2009     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

DNA binding to electropolymerized N‐substituted polypyrrole surfaces

This study explores the use of N‐substituted polypyrroles as a route for localizing DNA molecules onto conducting surfaces. N‐substituted pyrrole monomers containing N‐hydroxysuccinimidyl groups for DNA binding reactions were synthesized. These monomers were electro‐copolymerized under different conditions on platinum or gold working electrodes in a three‐electrode/single compartment cell. Subsequent DNA reactions were performed by incubating the resulting polymer conductive films with amino‐substituted DNA sequences. In addition, the electro‐copolymerization reactions of pyrrole monomers were conducted on preselected electrode positions of the Molecular Nanosystems (MNS) wafers and the formation of conductive films was demonstrated. In these experiments, it was determined also that by controlling the electro‐copolymerization reactions, the conductive films can be restricted to grow on specific locations of the MNS wafer. This was achieved by electrically passivating the chosen electrodes with self‐assembled multilayers (SAM)s of alkane thiols. Hexadecane thiol (HDT) was found the most efficient in forming SAMs and in preventing the pyrrole electropolymerization. Various analytical techniques including AFM, IR, and cyclic voltammetry (CV) were used to characterize the monomers, the electropolymerized polymers, and the attachment of amine‐terminated DNA to polypyrrole copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6014–6024, 2009     

Click synthesis and reversible electrochromic behaviors of novel polystyrenes bearing aromatic amine units

Novel electrochromic polymers were prepared by the click postfunctionalization of poly(4‐azidomethylstyrene) with alkyne‐containing aromatic amine units in the presence of Cu(I) catalysts. Two kinds of aromatic amine units, tris(4‐alkoxyphenyl)amine and N,N,N′,N′‐tetraphenyl‐p‐phenylenediamine, were introduced into polystyrene side chains, which were completely characterized by gel permeation chromatography–multiangle light scattering, nuclear magnetic resonance, and infrared spectroscopies, and elemental analysis. Thermal analyses demonstrated the high stability with the decomposition temperatures exceeding 300 °C even after postfunctionalization. The UV–vis absorption spectra of the polymer thin films revealed negligible absorption in the visible region, as reasonably confirmed by visual observation. The polymer thin films were prepared by spray‐coating on an indium tin oxide‐coated glass plate. Cyclic voltammograms of these films exhibited anodic peaks ascribed to the oxidation of the side‐chain aromatic amine moieties. The tris(4‐alkoxyphenyl)amine unit displayed one‐step oxidation at 0.287 V (vs. Ag/AgCl), while the N,N,N′,N′‐tetraphenyl‐p‐phenylenediamine unit showed two‐step oxidations at 0.297 and 0.641 V. These oxidation processes produced new colors of the polymer films. The former triarylamine‐based chromophore provided a blue color after the oxidation, while the latter phenylenediamine‐based chromophore showed a potentially controlled green and dark blue colors. The reversibility and switching behaviors of these color changes were also comprehensively investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel aromatic polyamides containing 2‐diphenylamino‐(9,9‐dimethylamine) units as multicolored electrochromic and high‐contrast electrofluorescent materials

A series of electrochromic and photoluminescence‐active polyamides 4a‐4e were prepared from a novel dicarboxylic acid, N,N‐di(4‐carboxyphenyl)‐2‐amino‐9,9‐dimethylfluorene, and five diamines via a condensation polymerization. These polyamides were amorphous and readily soluble in many solvents. The glass transition temperatures were in the range of 281–339 °C and the 10% weight loss temperatures in nitrogen were in excess of 490 °C. The polyamides exhibited strong fluorescence in either solution or solid states. The polyamides 4a‐4d showed reversible electrochemical redox with color changing from colorless to grey‐green. Specially, the polyamide 4e with 2‐diphenylamino‐(9,9‐dimethylamine) group in both diamine and dicarboxylic acid residues exhibited multicolored electrochromic behaviors. Furthermore, the fluorescence of these polyamides could be reversibly electroswitched with a high contrast up to 221.4, enabling their potential applications in dual‐switching electrochromic/electrofluorescent materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 213–222