首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 234 毫秒
1.
The synthesis,the crystal structure and the reaction of the hetero-binuclear complex[MnRe(CO)6(μ-SH)(μ-SC(H)PPr^i3)(PPh3)] are reported.The results of single crystal X-ray structure analysis showed that the fragments Mn(CO)3 and Re(CO)3 were bridged by SH and SC(H)PPr^i3.The title complexes can react with Bu^nLi and RX forming complexes MnRe(CO)6(μ-SR)(μ-SC(H)PPr^i3)(PPh3)](R=Me,CH2CH=CH2,SnBu3^n).  相似文献   

2.
The thermal behaviors of the complexes of Cu(DMTZB)4X2 (DMTZB=3,3‘-dimethyl-1-(1H-1,2,4-triazol-1-yl)-2-butanone, X=NO3 or ClO4) and Cu(DMTZB)2 X2 (X=Br or Cl) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC, EDS and elemental analysis techniques. The resuits showed that their decomposition proceeded in three different ways mainly depending on the anions in the molecules. The heat effect associated with the decomposition step of DMTZB molecules was also different. The decomposition mechanisms and the kinetic parameters of DMTZB were determined and calculated by jointly using four methods, which showed that its pyrolysis was controlled by D3 mechanism but with different activation energies and pre-exponential factors for different complexes.  相似文献   

3.
Br(?)nsted acidic ionic liquids based on imidazolium cation were employed as a series of environmentally benign catalysts and mediums in the alcoholysis of acetonitrile to synthesize ester.The results showed that Br(?)nsted acidic ionic liquid [HSO_3- pmim]HSO_4 was an efficient catalyst and medium for the alcoholysis of acetonitrile which could be recycled easily without obvious decline in catalytic activity,the highest yield could reach 85%.  相似文献   

4.
BrФnsted acidic ionic liquids based on imidazolium cation were employed as a series of environmentally benign catalysts and mediums in the alcoholysis of acetonitrile to synthesize ester. The results showed that BrФnsted acidic ionic liquid [HSO3- pmim]HSO4 was an efficient catalyst and medium for the alcoholysis of acetonitrile which could be recycled easily without obvious decline in catalytic activity, the highest yield could reach 85%.  相似文献   

5.
The X-ray crystal structures of (NH4)2(15-crown-5)3[Cu(mnt)2] (1) and (NH4)2(benzo-15-crown-5)4- [Cu(mnt)2]·0.5H2O (2) were determined. Two single crystals are composed of distinct structures of ammonium-crown ether supramolecular cation and [Cu(mnt)2]2- anion. The triple-decker dication in complex 1 and a sandwich dimmer in complex 2 were observed. X-Band EPR studies on the single crystals of both complex 1 and complex 2 have been carried out at room temperature, which revealed that complex 2 showed a perfect hyperfine structure of Cu whereas that of complex 1 could not be observed. The principal values and direction cosines of the principal axes of the g and A tensors were computed by a least-squares fitting procedure. The spin density of Cu(Ⅱ) was estimated according to the principal values of the A tensors and compared well with the results calculated based on DFT method.  相似文献   

6.
The X-ray crystal structures of (NH4)2(15-crown-5)3[Cu(mnt)2] (1) and (NH4)2(benzo-15-crown-5)4- [Cu(mnt)2]·0.5H2O (2) were determined. Two single crystals are composed of distinct structures of ammonium-crown ether supramolecular cation and [Cu(mnt)2]2? anion. The triple-decker dication in complex 1 and a sandwich dimmer in complex 2 were observed. X-Band EPR studies on the single crystals of both complex 1 and complex 2 have been carried out at room temperature, which revealed that complex 2 showed a perfect hyperfine structure of Cu whereas that of complex 1 could not be observed. The principal values and direction cosines of the principal axes of the g and A tensors were computed by a least-squares fitting procedure. The spin density of Cu(II) was estimated according to the principal values of the A tensors and compared well with the results calculated based on DFT method.  相似文献   

7.
A novel complex Cu(PPh3)2(acac) 1 (PPh3 = triphenylphosphine, acac = acetylacetone) was obtained by a solution reaction and structurally characterized by X-ray diffraction. The crystal belongs to monoclinic, space group P21/n with a = 13.7361(8), b = 12.8204(7), c = 19.7638(13) , β = 95.946(2)°, C41H37CuO2P2, Mr = 687.19, V = 3461.7(4) 3, Z = 4, Dc = 1.319 g/cm3, S = 1.067, μ(MoKα) = 0.758 mm–1, F(000) = 1432, R = 0.0403 and wR = 0.0990. Complex 1 is characterized by an isolated structure. X-ray structure analysis of 1 shows that acac behaves as a chelating ligand and PPh3 coordinates as a monodentate ligand to the Cu(I) atoms. Photoluminescent investigation reveals that the title complex displays a strong green-light emission.  相似文献   

8.
Calix[4] (aza) crowns containing amide groups 3a-d were synthesized by the reactions of calix[4]arene (1a) or p-tert-butylcalix[4]arene (1b) with N, N'-ethylenebis(2-chloroac-etamide) (2a) or N, N'-1,2-phenylenebis(2-chloroacetamide) (2b) by one step procedure in yields of 85-90% . Calix[4]-(aza) crowns 4a-b could be obtained by the reduction of 3a-b with LiAlH4 in yields of 51 and 67% , respectively. The nitration of 3a or 3c afforded new chromogenic calix[4]arenes 5a bearing two nitrophenol moieties and 5c bearing one nitro-phenol and one quinone moiety, respectively. The ipso-nitrations of 3b and 3d were also studied. Both gave the products containing one nitrophenol and one quinone moiety. Moreover, a very interesting calix[4]arene derivative 5d containing one cyclohexadienone moiety was also separated as the main product when 3d was ipso -nitrated.  相似文献   

9.
Preparation of PLGA Microspheres with Different Porous Morphologies   总被引:1,自引:0,他引:1  
甘志华  王峰 《高分子科学》2015,33(1):128-136
Poly(D,L-lactide-co-glycolide)(PLGA) microspheres were prepared by emulsion solvent evaporation method. The influences of inner aqueous phase, organic solvent, PLGA concentration on the morphology of microspheres were studied. The results showed that addition of porogen or surfactants to the inner aqueous phase, types of organic solvents and polymer concentration affected greatly the microsphere morphology. When dichloromethane was adopted as organic solvent, microspheres with porous structure were produced. When ethyl acetate served as organic solvent, two different morphologies were obtained. One was hollow microspheres with thin porous shell under a lower PLGA concentration, another was erythrocyte-like microspheres under a higher PLGA concentration. Three types of microspheres including porous, hollow core with thin porous shell(denoted by hollow in brief) and solid structures were finally selected for in vitro drug release tests. Bovine serum albumin(BSA) was chosen as model drug and encapsulated within the microspheres. The BSA encapsulation efficiency of porous, hollow and solid microspheres was respectively 90.4%, 79.8% and 0. And the ultimate accumulative release was respectively 74.5%, 58.9% and 0. The release rate of porous microspheres was much slower than that of hollow microspheres. The experiment results indicated that microspheres with different porous structures showed great potentials in controlling drug release behavior.  相似文献   

10.
A novel compound [Cl2Bz(3-MeQl) ](TCNQ) ([Cl2Bz(3-MeQl) ]+ = 1-(3,4-dichlo-robenzyl) 3-methlquinoline cation,TCNQ-= 7,7,8,8-tetracyanoquinodimethanide anion) has been synthesized by the reaction of [Cl2Bz(3-MeQl) ]Br and LiTCNQ,and its structure was determined by single-crystal X-ray diffraction. The crystal belongs to monoclinic,space group P21/c. The structure analysis shows that the anions are stacked into a column with isolated π-dimers,and there is one type of TCNQ entries(TCNQ) ,in agreement with the IR spectra analysis and density functional theory calculations of the compound. The most prominent structural features are the completely segregated stacking columns of the TCNQ- anions and [Cl2Bz(3-MeQl)]+ cations.  相似文献   

11.
Xu QF  Chen JX  Zhang WH  Ren ZG  Li HX  Zhang Y  Lang JP 《Inorganic chemistry》2006,45(10):4055-4064
Approaches to the assembly of (eta5-C5Me5)WS3Cu3-based supramolecular compounds from two preformed incomplete cubane-like clusters [PPh4][(eta5-C5Me5)WS3(CuX)3] (X = CN, 1a; X = Br, 1b) have been investigated. Treatment of 1a with LiBr/1,4-pyrazine (1,4-pyz), pyridine (py), LiCl/py, or 4,4'-bipyridine (4,4'-bipy) and treatment of 1b with 4,4'-bipy gave rise to a new set of W/Cu/S cluster-based compounds, [Li[((eta5-C5Me5)WS3Cu3(mu3-Br))2(mu-CN)3].C6H6]infinity (2), [(eta5-C5Me5)WS3Cu3(mu-CN)2(py)]infinity (3), [[PPh4][(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)].py]infinity (4), [PPh4]2[(eta5-C5Me5)WS3Cu3(CN)2]2(mu-CN)2.(4,4'-bipy) (5), and [[(eta5-C5Me5)WS3Cu3Br(mu-Br)(4,4'-bipy)].Et2O]infinity (6). The structures of 2-6 have been characterized by elemental analysis, IR spectra, and single-crystal X-ray crystallography. Compound 2 displays a 1D ladder-shaped chain structure built of square-like [[(eta5-C5Me5)WS3Cu3(mu3-Br)(mu-CN)]4](mu-CN)2(2-) anions via two pairs of Cu-mu-CN-Cu bridges. Compound 3 consists of a single 3D diamond-like network in which each (eta5-C5Me5)WS3Cu3 unit, serving as a tetrahedral node, interconnects with four other nearby units through Cu-mu-CN-Cu bridges. Compound 4 contains a 1D zigzag chain array made of cubane-like [(eta5-C5Me5)WS3Cu3(mu3-Cl)(mu-CN)(CN)]- anions linked by a couple of Cu-mu-CN-Cu bridges. Compound 5 contains a dimeric structure in which the two incomplete cubane-like [(eta5-C5Me5)WS3(CuCN)2(mu-CN)]- anions are strongly held together via a pair of Cu-mu-CN-Cu bridges. Compound 6 contains a 2D brick-wall layer structure in which dimers of [(eta5-C5Me5)WS3Cu3Br(4,4'-bipy)]2 are interconnected via four Cu-mu-Br-Cu bridges. The successful construction of (eta5-C5Me5)WS3Cu3-based supramolecular compounds 2-6 from the geometry-fixed clusters 1a and 1b may expand the scope of the rational design and construction of cluster-based supramolecular assemblies.  相似文献   

12.
Reactions of two preformed trinuclear W/Cu/S clusters, [A](2)[WS(4)(CuCN)(2)] (1: A = Et(4)N; 2: A = PPh(4)), with different concentrations of acetic acid in MeCN generate two interesting 2D polymeric clusters [Et(4)N](3)[(WS(4)Cu(2))(2)(mu-CN)(3)].2MeCN (3), and [PPh(4)][WS(4)Cu(3)(mu-CN)(2)].MeCN (4), respectively. Compound 4 can also be readily obtained in a high yield from the reaction of 2 with equimolar [Cu(MeCN)(4)]PF(6) in MeCN. These compounds have been characterized by elemental analysis, IR spectra, thermal analysis, and single-crystal X-ray diffraction. An X-ray analysis reveals that compound 3 retains the WS(4)Cu(2) cluster core, which serves as a 3-connecting node to link equivalent nodes via single cyanide bridges, forming an anionic 2D (6,3) net. Compound 4 consists of a T-shaped WS(4)Cu(3) core, which also acts as a 3-connecting node, with links to 3 equivalent clusters either through single or double cyanide bridges, affording a different anionic 2D (6,3) network. The acetic acid induced aggregation of 3 and 4 from the two cluster precursors 1 and 2 suggests that this simple synthetic strategy is likely to be applicable to many related systems.  相似文献   

13.
应用Gemini型咪唑基离子液体和聚丙烯(PP)熔融共混,制备出Gemini型咪唑基离子液体改性PP,并对改性PP的结构与性能进行了表征与测试.研究结果表明,Br[C14im](CH2)4[C14im]Br添加到PP中后,起到了异相成核的作用,同时使PP晶体结晶度减小;添加离子液体的样品熔融峰温,结晶峰温与纯样相近,同时离子液体也诱导了PP中α晶的生成;Gemini型咪唑基离子液体可以提高PP的抗静电性能,加入量为3 phr时,表面电阻率为8.97×109Ωcm,抗静电性能优良;此外,添加离子液体后样品拉伸强度有所降低,冲击强度有所提高,断裂伸长率有所下降,降低了PP的玻璃化温度,说明离子液体对PP有增塑作用.  相似文献   

14.
Five-coordinated trithiotungsten complexes (PPh(4))[(dmsp)W(S)(3)] (1a) and (PPh(4))[(dpsp)W(S)(3)] (1b) (R(2)PCH(2)CH(2)S(-); R = Me (dmsp-)), Ph (dpsp-))) were synthesized by addition of Hdmsp and Hdpsp to a THF solution of (PPh(4))[(EtS)W(S)(3)]. Treatment of 1a with CuBr in the presence of PPh(3) in CH(3)CN afforded a WCu(2) cluster (dmsp)WS(3)Cu(2)(PPh(3))(2)Br (2). The reaction of 1a with 1 equiv of FeCl(2) went smoothly to generate a 1:1 adduct (PPh(4))[(dmsp)WS(3)(FeCl(2))] (3), while 3 did not react further with excess FeCl(2). On the other hand, 3 was found to react with [Fe(CH(3)CN)(6)](ClO(4))(2), giving rise to an unusual tetranuclear cluster, [(dmsp)WS(3)](2)Fe(2)Cl (4), while the reaction of 1a with 2 equiv of [Fe(CH(3)CN)(6)](ClO(4))(2) led to a cyclic octanuclear cluster [(dmsp)WS(3)Fe](4) (5). Although the oxidation states of W(VI), Cu(I), and Fe(II) are retained in 2 and 3, reduction of the metal ions occurs in the formation of 4 and 5. All the complexes reported in this paper were structurally characterized by X-ray analysis. It is anticipated that the new type of trithiotungsten complexes, 1a and 1b, will serve as potential synthons for various heterometallic sulfide clusters.  相似文献   

15.
Dark green cuboid-shaped crystals of the composition {[P(o-tolyl) 3]Br} 2[Cu 2Br 6](Br 2) are obtained by the reaction of P(o-tolyl) 3 and CuBr 2 with Br 2 in the ionic liquid [NMeBu 3][N(Tf) 2]. The bromocuprate crystallizes triclinic [space group P1; Z = 1; a = 10.667(2) A; b = 10.695(2) A; c = 11.582(2) A; alpha = 74.42(3) degrees ; beta = 75.64(3) degrees ; and gamma = 85.68(3) degrees ]. The title compound is constituted of {[P(o-tolyl) 3]Br} (+) cations and [Cu 2Br 6] (2-) anions and contains molecular dibromine [d Br-Br = 2.341(1) A]. The latter is verified by thermogravimetry and mass spectrometry.  相似文献   

16.
A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.  相似文献   

17.
报道了〔WOS3Ag3Br(PPh3) 3〕·(OPPh3)簇合物 (C72 H6 0 Ag3BrO2 S3P4W ,Mr=176 4.6 1)单晶的合成和结构。该晶体属于三方晶系 ,空间群为R3 ,晶胞参数 :a =16 .14 0 (3) ,c =2 3 .0 0 3(4) ,V =5 189.4(15 ) 3,μ(MoKα) =3 .2 98mm- 1 ,Z =3 ,F(0 0 0 ) =2 5 98,Dc=1.6 94g/cm3。独立衍射点 2 181,可观察衍射点 195 2 (I≥ 2σ(I) ) ,R =0 .0 496 ,wR =0 .12 48。该晶体由簇合物分子〔WOS3Ag3Br(PPh3) 3〕和以P为中心的扭曲四面体结构的中性分子OPPh3 构成 ,其中的簇合物分子的骨架为由1个W原子、3个S原子、3个Ag原子和 1个Br原子构成的立方烷状。W、O(1)和Br原子位于C3轴上。  相似文献   

18.
SynthesisandCrystalStructureofDinuclearCopperClusterCompound[Cu(dtp)PPh_3]_2ChenQiu-Hua;LuShao-Fang;HuangXiao-Ying(StatekeyLab...  相似文献   

19.
1INTRoDUCTIONMolybdenum(Tungsten)-copper-sulfurandmolydenum(tungsten)-iron-sulfurcompoundshavebeenstudiedextensivelybecauseoftheirconnectionwithbiologicalprocesses[l,2j.Someheterotrimetalliccomplexeshavebeensynthesized,suchas[NEt'jtPh,p)sAgSzMoSzCu(CN))and[NEt'jtPh,P),AgS,MooCu(CN)jt3i,[l(CH,CH,)'j(PPh,)2{AgS2WS2Cu}(CN)jt4i,[(CH,CH2)4j(PPh,)2{AgS,WOCu}(CN)j('3,butheterotrimetal1iccomplexescontainingtungsten,copper,andironatomshaveseldombeenreported.Onecomplexofthiskindha…  相似文献   

20.
[Co3(1,2-S2C6H4)3(PPh3)3][CoBr3(DMF)].sol (1, sol=CHCl3,O(C2H5)2,H2O) was obtained from the reaction of CoBr(PPh3)3 with Na2(S2C6H4) in chloroform. The Co3 core in the cation of 1 exhibits a metal-metal bonded isosceles triangle, in which the two longer Co-Co bonds are both bridged by S2C6H4 ligands on two sides of the triangle plane respectively, while the bottom short Co-Co bond is bridged by the third bidentate S2C6H4 ligand. A series of polynu-clear cobalt cluster compounds with phosphine, thiolate and/or sulphur ligands were prepared by low oxidation state Co+ with thiolates in organic solvents. These tri-, tetra-, hexa-, heptanuclear cluster compounds 1-8 with various types of crystal structures can be viewed as the condensed polynuclear cobalt complexes that the cobalt atom frameworks with sulphur bridged were built through the small triangular units of [Co3S3nL3] (n=1,2) with or without [CoL] (L=PR3, Br, Cl, 5-C5H5) fragments.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号