Synthesis and Characterization of Water-Soluble Graft Copolymers from 2, 3-Dihydroxypropylcellulose and Acrylamide

Water-soluble 2,3-dihydroxypropylcellulose-polyacrylamide graft copolymers (DHPC-g-PAM) were prepared by Ce⁴⁺ ion-initiated graft copolymerization of acrylamide (AM) onto 2,3-dihydroxypropylcellulose (DHPC) dissolved in dilute nitric acid at room temperature under argon. The ratios of the concentration of Ce⁴⁺ ion to the concentration of DHPC were shown to affect the number and the length of the polyacrylamide grafts. The average number of grafts per chain was determined by acid-catalyzed degradation of the cellulose backbone and was found to be consistent with the presence or absence of free DHPC in the polymerization product prior to hydrolysis. The average number of grafts per DHPC molecule was found to be 2.7 or less depending on the reaction conditions.     

Noncovalent triblock copolymers based on a coiled-coil peptide motif

The formation of a noncovalent triblock copolymer based on a coiled-coil peptide motif is demonstrated in solution. A specific peptide pair (E and K) able to assemble into heterocoiled coils was chosen as the middle block of the polymer and conjugated to poly(ethylene glycol) (PEG) and polystyrene (PS) as the outer blocks. Mixing equimolar amounts of the polymer-peptide block copolymers PS-E and K-PEG resulted in the formation of coiled-coil complexes between the peptides and subsequently in the formation of the amphiphilic triblock copolymer PS-E/K-PEG. Aqueous self-assembly of the separate peptides (E and K), the block copolymers (PS-E and K-PEG), and equimolar mixtures thereof was studied by circular dichroism, dynamic light scattering, and cryogenic transmission electron microscopy. It was found that the noncovalent PS-E/K-PEG copolymer assembled into rodlike micelles, while in all other cases, spherical micelles were observed. Temperature-dependent studies revealed the reversible nature of the coiled-coil complex and the influence of this on the morphology of the aggregate. A possible mechanism for these transitions based on the interfacial free energy and the free energy of the hydrophobic blocks is discussed. The self-assembly of the polymer-peptide conjugates is compared to that of polystyrene-b-poly(ethylene glycol), emphasizing the importance of the coiled-coil peptide block in determining micellar structure and dynamic behavior.     

Synthesis and characterization of anionic graft copolymers containing poly(ethylene oxide) grafts

Anionic graft copolymers were synthesized through grafting of poly(ethylene glycol) monomethyl ether (MPEG) onto terpolymers containing succicinic anhydride groups. The backbone polymers were prepared through radical terpolymerization of maleic anhydride, styrene, and one of the following monomers: methyl methacrylate, ethylhexyl methacrylate, and diethyl fumarate. MPEG of different molecular weights were grafted onto the backbone through reactions with the cyclic anhydride groups. In this reaction one carboxylic acid group is formed together with each ester bond. The molecular weights of MPEG were found to influence the rate of the grafting reaction and the final degree of conversion. The graft copolymers were characterized by IR, GPC, and ¹H-NMR. Thermal properties were examined by DSC. Graft copolymers containing 50% w/w of MPEG 2000 grafts were found to be almost completely amorphous, presumably because of crosslinking, and hydrogen bonding between carboxylic acid groups in the backbone and the ether oxygens in MPEG grafts. © 1995 John Wiley & Sons, Inc.     

Peptide fibrillization

The fibrillization of peptides is relevant to many diseases based on the deposition of amyloids. The formation of fibrils is being intensively studied, especially in terms of nanotechnology applications, where fibrillar peptide hydrogels are used for cell scaffolds, as supports for functional and responsive biomaterials, biosensors, and nanowires. This Review is concerned with fundamental aspects of the self-assembly of peptides into fibrils, and discusses both natural amyloid-forming peptides and synthetic materials, including peptide fragments, copolymers, and amphiphiles.     

Hydrogels: From soft contact lenses and implants to self‐assembled nanomaterials

Hydrogels were the first biomaterials designed for clinical use. Their discovery and applications as soft contact lenses and implants are presented. This early hydrogel research served as a foundation for the expansion of biomedical polymers research into new directions: design of stimuli sensitive hydrogels that abruptly change their properties upon application of an external stimulus (pH, temperature, solvent, electrical field, biorecognition) and hydrogels as carriers for the delivery of drugs, peptides, and proteins. Finally, pathways to self‐assembly of block and graft copolymers into hydrogels of precise 3D structures are introduced. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5929–5946, 2009     

Amphiphilic graft copolymers - preparation and interfacial properties

Amphiphilic graft copolymers containing poly(ethylene oxide) (PEO) grafts have been prepared by various methods, for example, by coupling of reactive hydrophobic backbone polymers with end-functionalised PEO, by macromonomer copolymerisation, and by anionic graft polymerisation of EO onto polymer backbones carrying functional groups as initiator precursors. The graft copolymers are amphiphilic and were shown to accumulate at surfaces and interfaces in solution and in the solid state. Amphiphilic starch derivatives were prepared by reaction of amylose and starch with aliphatic α-epoxides.     

Synthesis and properties of poly(ethylene oxide)‐grafted polyethylene copolymer and terpolymer

A series of graft copolymers were synthesized based on ethylene‐co‐m,p‐methylstyrene (EMS) (backbone copolymer), ethylene‐1‐hexene‐m,p‐methylstyrene (EHMS) (backbone terpolymer), and polyethylene glycol monomethyl ethers (PEGM) (grafts) in this study. The PEGMs with molecular weights of 750 and 2000 were used. The chemical composition of the graft copolymers was analyzed by NMR and DSC measurements. The graft copolymers exhibited a phase‐separated morphology with the backbone and the methoxy polyethylene glycol (MPEG) grafts forming separate crystalline phases. The MPEG phase had a melting temperature lower than the corresponding MPEG homopolymer, as determined by DSC. The melting point of the crystalline phase formed by the EMS and EHMS main chains was lower than that of pure polymer backbone. Copyright © 2009 John Wiley & Sons, Ltd.     

Formation of polymer vesicles by amphiphilic fluorosiloxane graft copolymers in solution

Amphiphilic fluorosiloxane graft copolymers with a poly(dimethylsiloxane)(PDMS) backbone,a hydrophobic fluorosiloxane side-chain and three hydrophilic poiyether side-chains were synthesized by hydrosilation reaction in this work.The micellization of amphiphilic graft copolymers in the water/ethanol solvent system was investigated,and vesicles with different size were formed after the self-assembly system was aged for different time.     

Amphiphilic Graft Copolymers of Hydroxypropyl Cellulose Backbone with Nonpolar Polyisobutylene Branches

The novel amphiphilic graft copolymers with hydrophilic hard polar hydroxypropyl cellulose(HPC) backbone and hydrophobic soft nonpolar polyisobutylene(PIB) branches have been successfully synthesized through nucleophilic substitution reaction of living PIB chains carrying oxonium ions with the-OH groups along HPC backbone. The PIB branch length in the graft copolymers could be designed by living cationic polymerization and the grafting density could be adjusted by PIB~+/-OH molar ratio. The living PIB chains carrying oxonium ion were prepared by transformation of allyl bromide end groups in the presence of AgClO_4 and silver nanoparticles(3.2±0.3 nm, 0.7 wt%-1.8 wt%)generated in situ from AgBr. The phase-separation morphology was formed in the graft copolymers due to their incompatibility between backbone and branches. The hydrophilicity on the surface of graft copolymer films could be turned to hydrophobicity by increasing grafting density or/and length of PIB branches. The soft PIB segments in graft copolymers provided an unique surface via self-assembly for anti-protein adsorption against bovine serum albumin. A small amount of Ag nanoparticles in the copolymers contributed to good antibacterial activities against Staphylococcus aureus or Escherichia coli.     

Synthesis of poly(styrene-graft-ethylene oxide) by ethoxylation of amide group containing styrene copolymers

Graft copolymers containing poly(ethylene oxide) side chains on a polystyrene backbone have been synthesized. Styrene copolymers synthesized by free radical mechanism and containing between 5 and 15 mol % acrylamide or methacrylamide were used as backbones. The amide groups in the copolymers were ionized by using potassium tert-butoxide or potassium naphthalene, and grafting was achieved by utilizing the amide anions as initiator sites for the polymerization of ethylene oxide in 2-ethoxyethyl ether at 65°C. The graft copolymers were characterized with respect to molecular weight and composition using elemental analysis, NMR, gel permeation chromatography, IR, and viscosity measurements. The size of the side chains were between 600 and 2000 g/mol. GPC results from a hydrolyzed graft copolymer sample suggest a narrow size distribution for the poly(ethylene oxide) grafts. Solution properties of the graft copolymers were investigated in different toluene/methanol mixtures. The intrinsic viscosities of the graft copolymers were found to depend primarily on the poly(ethylene oxide) content rather than the graft density or the poly(ethylene oxide) chain length. © 1993 John Wiley & Sons, Inc.     

Two‐sided comb poly(amic ester)–poly(propylene oxide) graft copolymers as porous polyimide precursors

New step‐growth graft block copolymers were synthesized. These two‐sided comb copolymers consisted of a poly(amic ester) (PAE) backbone and pendant poly(propylene oxide) (PPO) grafts. The copolymers were made via a macromonomer approach, in which the 4,6‐bischlorocarbonyl isophthalic acid bis[poly(propylene oxide)] ester macromonomer was synthesized through the reaction of hydroxyl‐terminated PPO oligomers with pyromellitic dianhydride and oxalyl chloride. This macromonomer was subsequently used in step‐growth polymerization with comonomers 4,6‐bischlorocarbonyl isophthalic acid diethyl ester, 2,5‐bischlorocarbonyl terephthalic acid diethyl ester, and 2,2‐bis[4‐ (4‐aminophenoxy)phenyl] hexafluoropropane, and this yielded PPO‐co‐PAE graft copolymers. Accordingly, we report the synthesis and characterization of the PPO oligomer, the PPO macromonomer, and their corresponding PPO‐co‐PAE graft copolymers. Graft copolymers with PPO concentrations of 3–26 wt % were synthesized. These polymers were thermally cured to produce polyimide/PPO composites. The thermolysis of these polyimide/PPO composites yielded porous polyimide films with porosities ranging of 4–22.5%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2266–2275, 2005     

Graft copolymers composed of high molecular weight poly(ethylene oxide) backbone and poly(N-isopropylacrlylamide) side chains and their thermoassociating properties

Novel, water-soluble thermoassociative graft copolymers based on high molecular weight (HMW) poly(ethylene oxide-co-glycidol) backbone and relatively short grafts of poly-N-isopropyl acrylamide (NIPAAm) were prepared. The copolymer precursors with two architectures (block and graft) were synthesized using Ca-amide-alkoxide initiators. The OH groups in the copolymer precursors have been utilized for grafting NIPAAm using ceric ion (Ce⁴⁺) redox initiation. The idea was to imprint the “smart” properties of PNIPAAm grafts into common HMW poly(ethylene oxide). The sensitive moieties undergo reversible association transitions by changing the temperature of dilute and semidilute aqueous solutions of the copolymers. Associative properties were studied by viscosity and rheology measurements. Two types of interactions, induced by heating, depending on the copolymer concentration namely intra- and intermolecular association were observed.     

Preparation and characterization of chitosan‐graft‐poly (ϵ‐caprolactone) with an organic catalyst

Chitosan‐graft‐poly(ϵ‐caprolactone) was prepared via the ring‐opening graft polymerization of ϵ‐caprolactone (CL) through chitosan with 4‐dimethylaminopyridine as a catalyst and water as a swelling agent. The graft content of PCL within the graft copolymer was adjusted by the feed ratio of CL to chitosan, and the highest grafting concentration of PCL was up to about 400%. Fourier transform infrared, ¹H NMR, and two‐dimensional heteronuclear single quantum coherence analyses indicated that the amino group (NH₂ CH‐2) of chitosan initiated the graft polymerization of CL through the backbone of chitosan, and the hydroxyl group (HO CH_2–6) of chitosan did not participate in initiating the graft polymerization. The percentage of amino groups initiating the graft polymerization decreased with an increasing molar ratio of CL to chitosan in the feed, and this was attributed to the fact that the graft polymerization system increasingly became heterogeneous with an increasing feed ratio of CL to chitosan. The physical properties of the graft copolymers were characterized by thermogravimetric analysis and wide‐angle X‐ray diffraction, respectively. These suggested that the introduction of PCL grafts through the chitosan backbone would to some extent destroy the crystalline structure of chitosan, and the PCL grafts existed in an amorphous structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5353–5361, 2006     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Biocompatible,Hemocompatible and Antibacterial Acylated Dextran-g-polyisobutylene Graft Copolymers with Silver Nanoparticles

The novel amphiphilic acylated dextran-g-polyisobutylene (AcyDex-g-PIB) graft copolymers with different branch lengths (Mn,PiB,2600-5800 g/mol) and grafting numbers (GN,5-28 per 1000 Dex monosaccharide) were successfully synthesized via the nucleophilic substitution of the hydroxyl (--OH) side groups along AcyDex backbone by the living PIB-THF4+ chains prepared through cationic polymerization.The crystallization of AcyDex backbone in AcyDex-g-PIB graft copolymers was confined due to the presence of PIB branches and the morphology changed from short rod-like crystals to fragment-like crystals with increasing Mn,PIB and GN.The obvious microphase separation occurred due to the incompatibility between hard AcyDex backbone and soft PIB branches.AcyDex-g-PIB graft copolymers exhibit excellent biocompatibility towards HeLa cells and good hemocompatibility with red blood cells (RBCs),both of which increase with increasing GN.The increases of water contact angle and roughness on the surface of the graft copolymers with increasing Mn,PiB and GN manifest the anti-protein adsorption performance.The amphiphilic AcyDex-g-PIB graft copolymers could self-assemble in aqueous solution into nanospheres,which can be used as pH-sensitive drug carriers and can release 100％ of the loaded drug within 72 h at pH=7.4.AcyDex-g-PIB graft copolymers bearing silver nanoparticles (Ag-NPs,0.8 wt％-3.9 wt％,4.5-9.5 nm) show good antibacterial properties.This kind of amphiphilic graft copolymer would have a promising prospect in biological and medical fields.     

Preparation and Morphologies of AB6¯ Block‐Graft Copolymers

Microphase‐separated structures of a series of AB₆ block‐graft copolymers were studied by TEM and SAXS. Ten copolymers with the same polystyrene (S) backbone and six polyisoprene (I) grafts on the average but with different graft chain lengths were carefully synthesized by living anionic polymerization, covering the range 0.21 ≤ ?_S ≤ 0.90, where ?_S denotes polystyrene compositions. From TEM observation of the AB₆ block‐graft copolymers, it turns out to be clear that they show four microphase‐separated structures, S‐spheres, S‐cylinders(S‐prisms), alternative lamellae, and I‐cylinders. Among them, for example, the samples with 0.54 ≤ ?_S ≤ 0.58 shows prism structures whose cross sections of the S domains are close to hexagons, not circles, due to packing frustration of grafts. Composition dependence of morphologies of the present AB₆ block‐graft copolymers reveals their phase diagram is extremely asymmetric with respect to ?_S = 0.5. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 952–960     

Chitooligosaccharide Copolymers: Synthesis and Aqueous Self-assembly

Novel water-soluble amphiphilic graft copolymers (COS-g-PCL-b-MPEG) were synthesized by the coupling reaction between chitooligosaccharide (COS) and MPEG-b-PCL-COOH, which was synthesized via ring-opening polymerization of ε-caprolactone (CL) using MPEG as an initiator and subsequent carboxylation by succinic anhydride. The chemical composition of the graft copolymers was confirmed by ¹H-NMR spectra and FT-IR spectrometry. The thermal properties and crystallinity of the copolymers were observed by DSC and XRD measurements, which showed the existence of separate backbone and graft chain phases in the copolymer. The micellar behavior via self-assembly of the graft copolymers in aqueous solution was studied using pyrene fluorescence dye technique. AFM measurements showed that the micelles had a spherical morphology at the critical micelle concentration (CMC) and ranged in size from 20–45 nm. The amphiphilic ternary biodegradable graft copolymer endows the hydrophilic outer shell of micelles with structural and functional diversification, which might be desirable for drug delivery applications.     

Cationic polymerization of α-methylstyrene from polydienes. I. Synthesis and characterization of poly(butadiene-g-α-methylstyrene) copolymers

The preparation of poly(butadiene-g-α-methylstyrene) copolymers was investigated with three different alkylaluminum coinitiators. The alkylaluminum compounds in conjunction with polybutadiene which contained a low concentration of labile chlorine atoms initiated the polymerization of α-methylstyrene to produce graft copolymers. Trimethylaluminum gave higher grafting efficiencies than diethylaluminum chloride at comparable monomer conversions. Triethylaluminum produced only very low monomer conversions (<5%), even at long reaction times, and for this reason was not studied extensively. The number of grafts per polybutadiene backbone was determined for a number of copolymers and found to increase slightly as the allylic chlorine concentration in the polybutadiene backbone was increased. In all cases, however, only a low percentage of the available labile chlorine sites along the polybutadiene backbone resulted in grafted α-methylstyrene side chains. The addition of small quantities of water to the polymerization solvent greatly enhanced the grafting rate and ultimate monomer conversion during the synthesis of these poly(butadiene-g-α-methylstyrene) copolymers. The mechanistic role of water during these grafting reactions is unknown at the present time.     

接枝共聚物EPR-g-PS作PS/EPDM共混体系增容剂的探讨

使用了由大分子单体共聚合制备的以乙丙橡胶(EPR)为主干、聚苯乙烯(PS)为支链的接枝共聚物EPR-g-PS作为PS/EPDM共混体系的增容剂。实验结果表明,共混体系的组成、增容剂加入量以及增容剂分子结构对共混体系冲击强度有很大影响。将这些因素与相差显微镜及扫描电镜研究所揭示的共混物形态的变化相联系,对此类接校共聚物作为不相容体系增容剂的机理作了探讨。     

Chitosan-graft-poly(ϵ-caprolactone)s: An optimized chemical approach leading to a controllable structure and enhanced properties

A novel synthetic approach was developed for the controllable modification of chitosan (CS) with poly(ϵ-caprolactone) (PCL). 6-O-Triphenylmethyl-chitosan (TMCS) was synthesized as a highly soluble intermediate in organic solvents to facilitate an efficient grafting reaction of PCL onto CS in a homogeneous reaction medium. Subsequently, the syntheses of CS-g-PCL copolymers with different degrees of substitution (ds) and various chain lengths of PCL (number-average molecular weight = 1200–11,000) were carried out by a coupling reaction between the carboxylic terminal groups of PCL chains and the amino groups of TMCS. The successful grafting reaction was confirmed by GPC measurements, which indicated that the products were graft copolymers rather than physical blends. The ds, defined as the number of PCL chains per saccharide unit, of the graft copolymers could be adjusted simply by changes in the molar feed ratios of PCL to CS, and graft copolymers with different ds values ranging from 0.28 to 0.49 were synthesized, as calculated by ¹H NMR and elemental analysis. DSC and X-ray measurements showed that the melting temperature and enthalpy of the PCL grafts of these graft copolymers could be adjusted by the ds and the chains length of PCL, respectively. Meanwhile, the CS-g-PCL copolymers exhibited better solubility in various solvents, such as in chloroform for some of the resultant graft copolymers, than the original CS. Finally, nanoparticles of 100–200 nm, having hydrophobic PCL domains and cationic hydrophilic surfaces, were obtained through the self-assembly of the copolymers in selective solvents. These types of graft copolymers have great potential in various applications, such as targeted drug and gene delivery as well as tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2556–2568, 2007