Chiral separation of pheniramine by capillary electrophoresis partial-filling technique using hydroxypropyl-β-cyclodextrin as chiral selector

A simple capillary electrophoresis partial-filling technique for the enantioseparation of pheniramine is presented. Phosphate buffer and hydroxypropyl-β-cyclodextrin (HP-β-CD) were used as the electrolyte and chiral selector, respectively. Several experimental parameters such as HP-β-CD concentration, HP-β-CD plug length, CE temperature and applied voltage were studied. Under the selected conditions, pheniramine enantiomers can be separated within less than 14 min. The assay was validated for linearity (5.0 × 10⁻⁶–5.0 × 10⁻⁴ M; R ² = 0.9987), limit of detection (5.0 × 10⁻⁷ M), limit of quantitation (5.0 × 10⁻⁶ M), analytical precision (%RSD ≤ 9.8) and accuracy (%recovery = 101 ± 3). The proposed methodology was then applied to the analysis of a commercially available pharmaceutical eye drop preparation. The results are in good agreement with that declared by the manufacturer. The proposed methodology provides adequate results in terms of simplicity, cost, sample throughput, repeatability and accuracy for quality control of pheniramine enantiomers in pharmaceutical preparations.     

Determination of pheniramine enantiomers in eye drop by capillary electrophoresis using hydroxypropyl-β-cyclodextrin as chiral selector

A capillary zone electrophoresis procedure has been developed for the chiral determination of pheniramine in eye drop. Native and derivative cyclodextrins (CDs) including γ-CD, β-CD, hydroxypropyl-β-CD and dimethyl-β-CD were tested as chiral selectors. Using 30 mM hydroxypropyl-β-CD in 50 mM phosphate buffer (pH 3.0), the acceptable resolution value (R = 1.55) was obtained. The assay was validated for linearity (3.3 × 10⁻⁶–5.0 × 10⁻⁴ M; R ² = 0.9996), limit of detection (3.3 × 10⁻⁶ M), limit of quantification (8.5 × 10⁻⁶ M), analytical precision by terms of intra- and inter-day variability (RSD ≤ 2.57%), and accuracy (recovery ≥ 89.3%). The content of pheniramine in eye drop obtained by the proposed method was in good agreement with the declared value. The results indicated that pheniramine in the eye drop was present as the racemate.     

Capillary zone electrophoretic determination of tosufloxacin and trovafloxacin in urine

Summary A simple and rapid capillary zone electrophoretic method with UV detection has been developed for determination of tosufloxacin and trovafloxacin. The separation was performed in fused-silica capillaries (57 cm length × 75μm i.d.); the running buffer was 35mm borate + 35mm phosphate buffer solution, pH 8.6, containing 6% (v/v) acetonitrile. The applied potential was 15 kV, the temperature 30°C, and detection was at 262 nm. Piromidic acid was used as the internal standard. Response was linearly dependent on concentration in the range 1.0–120.0 μg mL⁻¹ and the detection limit was 0.2 μg mL⁻¹ for both compounds. The analysis was highly reproducible (RSD between 3.41 and 1.25%). The method was applied to the determination of tosufloxacin and trovafloxacin in human and rat urine. The method was validated by using HPLC as a reference method. Recovery was between 96.8 and 102%.     

Analysis of domperidone in pharmaceutical formulations and wastewater by differential pulse voltammetry at a glassy-carbon electrode

The redox characteristics of the drug domperidone at a glassy-carbon electrode (GCE) in aqueous media were critically investigated by differential-pulse voltammetry (DPV) and cyclic voltammetry (CV). In Britton–Robinson (BR) buffer of pH 2.6–10.3, an irreversible and diffusion-controlled oxidation wave was developed. The dependence of the CV response of the developed anodic peak on the sweep rate (ν) and on depolizer concentration was typical of an electrode-coupled chemical reaction mechanism (EC) in which an irreversible first-order reaction is interposed between the charges. The values of the electron-transfer coefficient (α) involved in the rate-determining step calculated from the linear plots of E _p,a against ln (ν) in the pH range investigated were in the range 0.64 ± 0.05 confirming the irreversible nature of the oxidation peak. In BR buffer of pH 7.6–8.4, a well defined oxidation wave was developed and the plot of peak current height of the DPV against domperidone concentration at this peak potential was linear in the range 5.20 × 10⁻⁶ to 2.40 × 10⁻⁵ mol L⁻¹ with lower limits of detection (LOD) and quantitation (LOQ) of 6.1 × 10⁻⁷ and 9.1 × 10⁻⁷ mol L⁻¹, respectively. A relative standard deviation of 2.39% (n = 5) was obtained for 8.5 × 10⁻⁶ mol L⁻¹ of the drug. These DPV procedures were successfully used for analysis of domperidone in the pure form (98.2 ± 3.1%), dosage form (98.35 ± 2.9%), and in tap (97.0 ± 3.6%) and wastewater (95.0 ± 2.9%) samples. The method was validated by comparison with standard titrimetric and HPLC methods. Acceptable error of less than 3.3 % was also achieved. Figure In aqueous media at pH 7.6- 8.4, the DPV and cyclic voltammetry of the drug domperidone (I) at GCE showed an irreversible and diffusion controlled oxidation wave. The values of the electron transfer coefficient (α) involved in the rate determining step were found in the range 0.64± 0.05 confirming the irreversible nature of the peak. The analysis of the drug in pure form and in wastewater samples was successfully achieved     

In vitro monitoring of GTPase activity and enzyme kinetics studies using capillary electrophoresis

A capillary electrophoresis (CE)-based method for the in vitro detection and monitoring of nucleotide-triphosphatase activity is described. This robust and reproducible method was used to investigate GTPase activity of a recombinant protein construct containing the catalytic domain of Human SEPT4/Bradeion β (GST-rDGTPase). This example application demonstrates that the CE technique can replace classical radioactive methods for GTPase activity assays and may be used as a routine analytical tool. Enzyme kinetics of GST-rDGTPase was studied and yielded the following kinetic parameters: v _max = 1.7 μM min⁻¹ ± 0.1, Km = 1.0 mM ± 0.3, and apKcat = 9 × 10⁻³ s⁻¹. In addition the effect of co-factors such as Mg²⁺ and Mn²⁺ on the catalytic activity was investigated. The described analytical method was also shown to be useful to analyze diphosphated and triphosphated forms of other nucleotides.     

Direct determination of sialic acids in serum by capillary electrophoresis with UV detection

Summary A novel method for the determination of N-acetylneuraminic acid (NANA) and N-glycolylneuraminic acid (NGNA) has been developed using high-performance capillary electrophoresis with UV detection at 195 nm, without pre or post-column derivatisation. The acids were separated in a 50-cm, fused-silica capillary (50μ i.d, 45.5-cm effective length) with Na₂B₄O₇−Na₂HPO₄ buffer. The detection limit for NANA is a concentration of 9.6×10⁻⁶ M or, in terms of mass:3.879×10⁻¹⁴ mol (39 fmol). This method is applicable to determination of NANA in normal human serum. The results were also compared with those of the colorimetrie method.     

Electrophoretic Mobilities of the Isotopes of Chloride and Bromide Ions in Aqueous Solution at 25 °C and Infinite Dilution

The electrophoretic mobilities of a few halide isotopes in aqueous solution have been evaluated at 25 °C and infinite dilution by analyzing a combination of data obtained by capillary electrophoresis (CE) and conductance data extracted from the literature. The effect of the temperature on the electrophoretic mobility has been thoroughly re-investigated to give the following temperature dependence for the chloride ion at 25 °C: 1.565%/ °C in 5×10⁻³ mol⋅L⁻¹ sodium chromate + 3×10⁻³ mol⋅L⁻¹ sodium borate buffer. The precise determination of the electrophoretic mobility of chloride and bromide ions, including the evaluation of their associated uncertainties, has been performed from conductance data spanning over 75 years. The electrophoretic mobilities are found to be −(79.124±0.020)×10⁻⁹ m²⋅V⁻¹⋅s⁻¹ for Cl⁻ and −(80.99±0.04)×10⁻⁹ m²⋅V⁻¹⋅s⁻¹ for Br⁻. Thanks to the precise determination of the temperature contribution and the re-evaluation of conductance data, the following values have been found for ³⁵Cl⁻, ³⁷Cl⁻, ⁷⁹Br⁻, and ⁸¹Br⁻ (in 10⁻⁹ m²⋅V⁻¹⋅s⁻¹): −(79.18±0.02), −(78.95±0.06), −(81.04±0.04), and −(80.94±0.04).     

The determination of lansoprazole in pharmaceutical preparation by capillary electrophoresis

Summary A capillary electrophoretic method for the determination of lansoprazole in pharmaceutical preparations is described. The analysis was performed in a fused silica capillary using 20 mM borate buffer at pH 8.7 as a background electrolyte. The best resolution was obtained by applying a potential of 30 kV and vacuum injection of 1 s. Detection was made at 200 nm. Phenobarbital sodium was a good internal standard and the migration times were 4.1±0.2 min (lansoprazole) and 5.7±0.2 min (phenobarbital sodium). A well-correlated calibration equation was found in the range of 1.12×10⁻⁵ and 2.24×10⁻⁴ M. Limit of detection (LOD) and limit of quantitation (LOQ) were 1.4×10⁻⁶ M (RSD 1.44%) and 4.42×10⁻⁶ M (RSD 1.49%), respectively. The method was validated and applied to the capsules containing enteric coated pellets of lansoprazole. The results of the proposed method were compared those of UV spectrophotometry. Insignificant differences were found between the two methods at the 95% probability level. The described CE method is selective, rapid, sensitive and accurate for the analysis of lansoprazole in quality control laboratories.     

Sensitivity improvement in capillary electrophoresis using organo-aqueous separation buffers and thermal lens detection

It is shown that organo-aqueous separation buffers show much promise when used in capillary electrophoresis separations with photothermal (thermal lens) detection systems. Acetonitrile–water and methanol–water mixtures were selected, as conventionally used in capillary electrophoresis. It is shown that, despite more sophisticated experimental conditions (significant heat outflow from the capillary body) and peak detection, the theoretical ratio of the thermal lens signal for a binary mixture to the thermal lens signal for an aqueous solution (or the corresponding ratio obtained experimentally under bulk batch conditions) can be used to predict the sensitivity of thermal lens detection in capillary electrophoresis. The limits of detection for 2-, 3-, and 4-nitrophenols selected as model compounds in 70% v/v acetonitrile separation buffers are 1×10⁻⁶ M, 1×10⁻⁶ M and 3×10⁻⁷ M, respectively, and are therefore decreased by a factor of six compared to thermal lens detection in aqueous separation buffers. The overall increase in the thermal lens detection sensitivity in a 100% ACN buffer is a factor of 13.      

Fluorescent detection of peptides and amino acids for capillary electrophoresis via on-line derivatization with 4-fluoro-7-nitro-2,1,3-benzoxadiazole

An in-capillary derivatization of amino acids and peptides with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) was developed for their subsequent capillary electrophoretic analysis with laser-induced fluorescence detection (λ _ex=488 nm). The in-capillary derivatization was achieved in zone-passing mode by introducing successive plugs of sample and NBD-F into a fused silica capillary previously equilibrated with an alkaline borate buffer. To prevent NBD-F hydrolysis and to achieve a reliable derivatization, NBD-F was prepared daily in absolute ethanol and a plug of absolute ethanol was introduced between the sample and NBD-F reagent plugs. Various parameters influencing the derivatization efficiency were investigated and the optimum conditions were as follows: background electrolyte (BGE), 20 mM borate buffer (pH 8.8); introduction time, 4 s for sample and 2 s for NBD-F; molar ratio of NBD-F/sample, above 215; temperature, 45 °C for amino acids and 35 °C for peptides; applied voltage, +15 kV. The validation of the in-capillary derivatization method under optimal conditions showed a good linearity between the heights of the derivative peaks and the concentrations of the amino acids. The intra-day relative standard deviations of the migration times and the peak heights were less than 1.3% and 4.6%, respectively. The efficient derivatization and separation of a mixture of valine, alanine, glutamic acid and aspartic acid were achieved using this technique. Peptides such as buccaline and β-protein fragment 1–42 could also be derivatized using the developed in-capillary derivatization procedure. In‑capillary derivatization and separation of amino acids with different concentrations. From the top to bottom the concentrations are 1.11×10⁻⁵ M, 5.55×10⁻⁶ M, 2.78×10⁻⁶ M, 6.95×10⁻⁷ M. for valine; 1.26×10⁻⁵ M, 6.30×10⁻⁶ M, 3.15×10⁻⁶ M, 7.88×10⁻⁷ M for alanine; 3.78×10⁻⁵ M, 1.89×10⁻⁵ M, 9.45×10⁻⁶ M, 2.36×10⁻⁶ M for glutamic acid;, 4.27×10⁻⁵ M, 2.14×10⁻⁵ M, 1.07×10⁻⁵ M, 2.68×10⁻⁶ M for aspartic acid. Experiment conditions: injection order: 4s for sample, 1s for absolute ethanol, and then 2s for 5.24×10⁻² M NBD‑F; BGE: 20 mM borate pH 8.77; Applied voltage: 15 kV.     

In-line solid-phase extraction–capillary electrophoresis coupled with mass spectrometry for determination of drugs of abuse in human urine

In-line solid-phase extraction–capillary electrophoresis coupled with mass spectrometric detection (SPE–CE–MS) has been used for determination of 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP), codeine (COD), hydrocodeine (HCOD), and 6-acetylmorphine (6AM) in urine. The preconcentration system consists of a small capillary filled with Oasis HLB sorbent and inserted into the inlet section of the electrophoresis capillary. The SPE–CE–MS experimental conditions were optimized as follows: the sample (adjusted to pH 6.0) was loaded at 930 mbar for 60 min, elution was performed with methanol at 50 mbar for 35 s, 60 mmol L⁻¹ ammonium acetate at pH 3.8 was used as running buffer, the separation voltage was 30 kV, and the sheath liquid at a flow rate of 5.0 μL min⁻¹ was isopropanol–water 50:50 (v/v) containing 0.5% acetic acid. Analysis of urine samples spiked with the four drugs and diluted 1:1 (v/v) was studied in the linear range 0.08–10 ng mL⁻¹. Detection limits (LODs) (S/N = 3) were between 0.013 and 0.210 ng mL⁻¹. Repeatability (expressed as relative standard deviation) was below 7.2%. The method developed enables simple and effective determination of these drugs of abuse in urine samples at the levels encountered in toxicology and doping.     

Simultaneous determination of phenylenediamine isomers and dihydroxybenzene isomers in hair dyes by capillary zone electrophoresis coupled with amperometric detection

The simultaneous determination of three isomers of phenylenediamines (o, m, and p-phenylenediamine) and two isomers of dihydroxybenzenes (catechol and resorcinol) in hair dyes was performed by capillary zone electrophoresis coupled with amperometric detection (CZE–AD). The effects of working electrode potential, pH and concentration of running buffer, separation voltage, and injection time on CZE–AD were investigated. Under the optimum conditions the five analytes could be perfectly separated in 0.30 mol L⁻¹ borate–0.40 mol L⁻¹ phosphate buffer (pH 5.8) within 15 min. A 300 μm diameter platinum electrode had good responses at +0.85 V (versus SCE) for the five analytes. Their linear ranges were from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ and the detection limits were as low as 10⁻⁷ mol L⁻¹ (S/N = 3). This working electrode was successfully used to analyze eight kinds of hair dye sample with recoveries in the range 91.0–108.0% and RSDs less than 5.0%. These results demonstrated that capillary zone electrophoresis coupled with electrochemical detection using a platinum working electrode as detector was convenient, highly sensitive, highly repeatable and could be used in the rapid determination of practical samples. Figure Electropherograms obtained from 10 mg mL⁻¹ hair dye sample solutions at a platinum working electrode under optimum CZE–AD conditions: (a) natural black (I), (b) golden: (1) p-phenylenediamine, (2) m-phenylenediamine, (3) o-phenylenediamine, (4) resorcinol, and (5) catechol     

Binding properties of a monoclonal antibody against the Cry1Ab from <Emphasis Type="Italic">Bacillus Thuringensis</Emphasis> for the development of a capillary electrophoresis competitive immunoassay

Experimental work performed was aimed at the assessment of a competitive capillary electrophoresis immunoassay with laser-induced fluorescence (CEIA-LIF) detection for the determination of the Cry1Ab endotoxin from Bacillus thuringensis. The binding constant of a monoclonal antibody, raised against the insecticide protein Cry1Ab, was determined on a microplate by indirect enzyme-linked immunosorbent assay (ELISA) and compared with that obtained in-capillary under nonequilibrium separation conditions. The two binding constants appear comparable—(5.0 ± 1.2) × 10⁶ M⁻¹ and (9.06 ± 5.7) × 10⁶ M⁻¹—reflecting good preservation of the antibody binding behavior in the capillary electrophoresis format. These results allow use of a calibration curve possible between 0.2 and 150 nM of endotoxin protein, with a limit of detection of 0.5 nM (33 μg L⁻¹). Preliminary recovery experiments on maize extracts spiked with known amounts of Cry1Ab endotoxin also showed promising results in detecting the toxin in complex real matrices.     

Determination of phenols in <Emphasis Type="Italic">Fructus Lycii</Emphasis> by capillary electrophoresis with electrochemical detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been developed for the determination of bioactive phenols in Fructus Lycii samples. Under the optimum conditions, the seven analytes could be well separated within 24 min in a 80 mM borax running buffer. Good linear relationship was established between peak current and concentration of analytes over three orders of magnitude with detection limits (S/N = 3) ranging from 3.5 × 10⁻⁸ to 6.0 × 10⁻⁸ g/mL for all analytes. The proposed method has been successfully applied for the study on the efficiency of electrochemically active ingredients in polar extracts of Fructus Lycii after a relatively simple pretreatment.     

Ion-pair formation in the outer-sphere electron transfer reactions between tris-(1, 10) phenanthroline iron(II) and the halopentacyanocobaltate(III) complexes in aqueous acidic solutions

The kinetics of the reactions between Fe(phen) ₃ ²⁺ [phen = tris–(1,10) phenanthroline] and Co(CN)₅X³⁻ (X = Cl, Br or I) have been investigated in aqueous acidic solutions at I = 0.1 mol dm⁻³ (NaCl/HCl). The reactions were carried out at a fixed acid concentration ([H⁺] = 0.01 mol dm⁻³) and the second-order rate constants for the reactions at 25 °C were within the range of (0.151–1.117) dm³ mol⁻¹ s⁻¹. Ion-pair constants K _ip for these reactions, taking into consideration the protonation of the cobalt complexes, were 5.19 × 10⁴, 3.00 × 10² and 4.02 × 10⁴ mol⁻¹ dm⁻³ for X = Cl, Br and I, respectively. Activation parameters measured for these systems were as follows: ΔH* (kJ K⁻¹ mol⁻¹) = 94.3 ± 0.6, 97.3 ± 1.0 and 109.1 ± 0.4; ΔS* (J K⁻¹) = 69.1 ± 1.9, 74.9 ± 3.2 and 112.3 ± 1.3; ΔG* (kJ) = 73.7 ± 0.6, 75.0 ± 1.0 and 75.7 ± 0.4; E _a (kJ) = 96.9 ± 0.3, 99.8 ± 0.4, and 122.9 ± 0.3; A (dm³ mol⁻¹ s⁻¹) = (7.079 ± 0.035) × 10¹⁶, (1.413 ± 0.011) × 10¹⁷, and (9.772 ± 0.027) × 10²⁰ for X = Cl, Br, and I respectively. An outer – sphere mechanism is proposed for all the reactions.     

Simultaneous RP-LC Determination of Ketorolac and its Piperazinylalkyl Ester Prodrugs

A simple, rapid and selective RP-HPLC method was developed and validated for the determination of ketorolac and five piperazinylalkyl ester prodrugs. A binary isocratic mobile phase composed of a mixture of 65:35 (v/v) 0.02 M phosphate buffer (pH 5.4) and acetonitrile was used on a C₁₈ column (125 × 4 mm, 5 μm). The injection volume was 25 μL and the detection wavelength was 314 nm and the flow rate was 1.5 mL min⁻¹. The method exhibited excellent linearity with R ² of no less than 0.999 and intra-assay and inter-assay precision that were less than the maximum amount allowed according to Horwitz equation. The accuracy was found to be within the allowed ±15%. The limits of detection for the analytes were between 0.060 and 0.220 μg mL⁻¹ and the limits of quantification were between 0.183 and 0.667 μg mL⁻¹. This method was used successfully for the study of the solubility, stability and partition coefficients of piperazinylalkyl ester prodrugs of ketorolac.     

Determination of azelaic and sorbic acid in pharmaceduticals by capillary electrophoresis

Summary Capillary electrophoresis with indirect UV detection at 254 nm was applied to simultaneous determination of ∼20% of azelaic acid and ∼0.1% of sorbic acid in AKNOREN cream. The acids were separated in fused silica capillary (45 cm × 50 μm) at 30 kV. Optimised back-ground electrolyte was 30 mM benzoate buffer (pH∼6, adjusted with TRIS) containing 7 mM β-cyclodextrin and 5% of methanol; internal standard was 2-hydroxysobutyric acid (HIBA). Rectilinear calibration ranges were 0.4–4 mg mL⁻¹ for azelaic acid and 2–20 μg mL⁻¹ for sorbic acid and the recoveries were 97.2–100.5%. A single analysis took <15 min.     

CE Determination of 2-(9-Carbazole)ethyl Chloroformate-Labeled Oligopeptides

A pre-column derivatization method for sensitive determination of oligopeptides, using the tagging reagent 2-(9-carbazole)ethyl chloroformate (CEOC-Cl) followed by capillary electrophoresis (CE) with diode-array detection, has been developed. Maximum yield close to 100% were observed when a three to fourfold molar excess of reagent was used at pH 9.0–10.0. Excess reagent was extracted with n-hexane–ethyl acetate 9:1–10:1 (v/v); this enabled direct analysis using CE with no significant disturbance from the major fluorescent reagent degradation by-products. The effects on the results of buffer pH and of SDS and organic modifier concentrations were examined. Good baseline resolution in the separation of five CEOC-peptides was achieved with a 48.5-cm total length (effective length 40 cm) 50-μm inner diameter capillary column.     

Evaluation of antioxidants using oxidation reaction rate constants

An evaluation method for the capacity of antioxidants to protect drugs against oxidation is presented. As a new viewpoint, to determine the priority of the competitive oxidations between the antioxidant and the protected drug, and to compare the drug-protection capacity of antioxidants, it is important to determine their oxidation rate constants using chemical kinetics instead of standard oxidation (or reduction) potentials. Sodium sulfite, sodium bisulfite and sodium pyrosulfite were used as models for the determination of oxidation reaction rate constants in aqueous solutions. In the experiments, sufficient air was continually infused into the solution to keep the concentration of dissolved oxygen constant. The residual concentrations of the antioxidants were determined by iodimetry, and the concentration of dissolved oxygen by oxygen electrode. The data were fitted by linear regressions to obtain the reaction rate constants. It was found that the degradation of sodium sulfite, sodium bisulfite or sodium pyrosulfite obeyed pseudo zero-order kinetics in the buffer solutions. Because of the ionization equilibrium, these three antioxidants have the same ion form in solutions at a definite pH value and therefore their apparent rate constants were essentially the same. The average apparent rate constants of the three antioxidants at 25°C are (1.34 ± 0.03) × 10⁻³ at pH 6.8, (1.20 ± 0.02) × 10⁻³ at pH 4.0 and (6.58 ± 0.02) × 10⁻³ mol·L⁻¹·h⁻¹ at pH 9.2, respectively. Translated from Acta Chimica Sinica, 2006, 64(6): 496–500 (in Chinese)     

Kinetic study of the promazine oxidation to promazine 5-oxide by trisoxalatocobaltate(III) in basic aqueous media

The kinetics of the oxidation of promazine by trisoxalatocobaltate(III) were studied in the presence of a large excess of the cobalt(III) in tris buffer solution using u.v.–vis spectroscopy ([Co^III] = (0.6 − 2) × 10⁻³ M, [ptz] = 6 × 10⁻⁵ M, pH = 6.6–7.8, I = 0.1 M (NaCl), T = 288−308 K, l = 1 cm). The reaction proceeds via two consecutive reversible steps. In the first step, the reaction leads to formation of cobalt(II) species and a stable cationic radical. In the second step, cobalt(III) is reduced to cobalt(II) ion and a promazine radical is oxidized to the promazine 5-oxide. Linear dependences of the pseudo-first-order rate constants (k ₁ and k ₂) on [Co^III] with a non-zero intercept were established for both redox processes. Rates of reactions decreased with increasing concentration of the H⁺ ion indicating that the promazine and its radical exist in equilibrium with their deprotonated forms, which are reactive reducing species. The activation parameters for reactions studied were as follows: ΔH^≠ = 44 ± 1 kJ mol⁻¹, ΔS^≠ = −100 ± 4 JK⁻¹ mol⁻¹ for the first step and ΔH^≠ = 25 ± 1 kJ mol⁻¹, ΔS^≠ = −169 ± 4 J K⁻¹ mol⁻¹ for the second step, respectively. Mechanistic consequences of all the results are discussed.