首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
支撑液膜是一种结合膜材料与萃取体系的高效率分离技术.然而在使用过程中,溶剂与萃取载体从多孔支撑体中流失和多孔膜材料在有机相载体中不稳定,导致支撑液膜通量的衰减或选择性降低,支撑液膜表现为不稳定,目前尚未见工业化的成功案例.本文简要介绍了支撑液膜不稳定机理,从膜材料角度,综述了提高支撑液膜稳定性的方法.重点介绍了液膜凝胶...  相似文献   

2.
离子液体在萃取和液膜过程中的应用研究新进展   总被引:1,自引:0,他引:1  
介绍了近几年离子液体在萃取和液膜分离过程中研究应用的新进展,并展望了离子液体在分离科学应用的前景和发展方向。引用文献56篇。  相似文献   

3.
支撑液膜是一种在湿法冶金、生物技术以及气体分离等多个领域都有应用的重要膜分离技术。本文回顾了支撑液膜技术分离CO2的研究进展,按照液膜相的不同,分类介绍了常规载体支撑液膜和离子液体支撑液膜,指出了常规载体支撑液膜分离CO2的局限性,重点介绍了离子液体支撑液膜分离CO2的发展,分析了气体在离子液体支撑液膜中的传质机理以及常规离子液体结构、含量和支撑膜材料等对分离效果的影响;讨论了离子液体的功能化方法以及功能化离子液体支撑液膜分离CO2的渗透率、选择性和液膜稳定性;介绍了两种新的离子液体支撑液膜改进方法:聚离子液体膜与凝胶化离子液体支撑液膜。最后指出了今后用于CO2分离的离子液体支撑液膜的发展方向。  相似文献   

4.
乳状液膜分离技术具有快速高效、选择性强、富集比大等优点[1-4],但该技术目前大多还处在实验阶段,要实现工业化则必须解决液膜稳定性、有毒试剂的使用及二次污染等问题.表面活性剂对于乳状液膜的形成和稳定至关重要[5-7],而在液膜体系中采用复合表面活性剂,能改善液膜性能,提高膜稳定性及传质效率[8].本文研究了铜(Ⅱ)在span80-SDS-NH3液膜体系中的迁移行为.体系中无流动载体,利用内、外相中被分离物的浓度梯度促进物质迁移.当Cu2+进入内相时,与NH3产生络合反应,使内相中游离的铜离子浓度趋于零而促使其由外相进入内相,实现Cu2+与外相溶液的分离.  相似文献   

5.
连续流动液膜萃取中液膜有机溶剂的选择   总被引:4,自引:1,他引:3  
以具有不同极性的环境内分泌干扰物双酚A、辛基酚和壬基酚为模型化合物,对连续流动液膜萃取中用作液膜的有机溶剂进行了选择;结果表明,不同极性的有机溶剂对于极性不同的化合物的萃取效率明显不同。  相似文献   

6.
水中有机污染物前处理方法进展   总被引:15,自引:4,他引:15  
综述了水样中有机污染物前处理方法的进展情况;重点介绍液-液萃取、固相萃取、液相微萃取、膜萃取和顶空处理技术5种前处理方法的一些基本情况及其优缺点。  相似文献   

7.
铈(Ⅳ)与RE(Ⅲ)的中空纤维膜基萃取分离   总被引:1,自引:0,他引:1  
将中空纤维膜用于膜基萃取分离是70年代开发的新分离技术,对金属离子的萃取分离[1~4]、有机有害物质的提取[5~7]及生物发酵产品和生物活性物质的提纯[8]均有报道.由于固体膜的相分离作用,中空纤维膜基萃取可实现非分散性分离操作,避免了液相萃取中液泛...  相似文献   

8.
平板夹心型支撑液膜萃取体系中La^3+的迁移行为   总被引:5,自引:1,他引:4  
易涛  李洁 《中国稀土学报》1995,13(3):197-200
在含HEH(EHP)的平板夹心型支撑液膜萃取La^3+的体系中,研究了体系传质过程中的渗透系数p及其影响因素。实验证明夹心型与单型支撑液膜的传质理论模型以及料液酸度和反萃液酸度对传质渗透系数的影响基本一致。当体系料液的pH在3.5 ̄4.2之间时,体系的渗透系数p趋于稳定;p随反萃液酸度的增加而增大,当反萃液酸度大于4.0mol/L时,p趋于恒定;比较了用不同材料和厚度的夹心型支撑液膜体系萃取la2  相似文献   

9.
微流控芯片(Microfluidic chip)是微全分析系统(μTAS)研究中最为活跃的领域和发展前沿,在仪器微型化方面展现出很多优点[1].Kitamori等[2,3]根据多相层流无膜扩散分离技术建立了芯片上的微流控液-液萃取分离系统,对芯片上的液-液萃取方法进行了系统的研究.  相似文献   

10.
本文先在大块液膜体系中以环已烷甲酸为载体,通过正交设计,系统地研究了各种因素对希土离子输送作用的影响规律。比较了相同条件下RE~(3+)(希土)同Na~+,NH_4~+、Ca~(2+)和Fe~(3+)等离子的输送作用。发现在适当条件下,无皂化的羧酸载体对RE~(3+)离子具有良好的输送效果,同时证实,羧酸输送RE~(3+)离子是通过三个H~+离子与一个RE~(3+)离子的交换,而当载体皂化时,皂化的载体直接与接收相H~+离子发生交换,从而降低了羧酸对RE~(3+)离子的输送和分离效果。 在大块液膜研究的基础上,建立了一个以无皂化的环烷酸为载体的乳状液膜体系,从模拟离子矿的硫酸铵浸出液中萃取希土,通过正交试验确定了最优的液膜萃取条件,希土萃取率达96%以上,富集度30~40倍。  相似文献   

11.
Many pollutants are present at trace level in our environment, which are beyond the scope of the detection by advance instruments too. Therefore, there is urgent need to develop advance sample preparation methods to determine the concentrations of the pollutants even at trace levels. Keeping this into consideration, many extraction techniques have been developed and applied for the analysis of organic pollutants in environmental samples. This review presents the sate-of-the-art of sample preparation methods in environmental samples. The extraction techniques discussed are headspace, liquid based extraction, supported liquid, homogeneous liquid–liquid, homogeneous liquid–liquid, single drop micro-extraction, membrane assisted solvent, solid-phase, molecularly imprinted solid-phase, monolithic spin column, matrix solid-phase, dispersive solid-phase, disposable pipette, magnetic solid-phase, solid-phase micro-extraction, micro-extraction by packed sorbent and stir bar sorptive. The article will be highly useful for environmental chromatographers.  相似文献   

12.
In the last 5 years, additive manufacturing (three‐dimensional printing) has emerged as a highly valuable technology to advance the field of analytical sample preparation. Three‐dimensional printing enabled the cost‐effective and rapid fabrication of devices for sample preparation, especially in flow‐based mode, opening new possibilities for the development of automated analytical methods. Recent advances involve membrane‐based three‐dimensional printed separation devices fabricated by print‐pause‐print and multi‐material three‐dimensional printing, or improved three‐dimensional printed holders for solid‐phase extraction containing sorbent bead packings, extraction disks, fibers, and magnetic particles. Other recent developments rely on the direct three‐dimensional printing of extraction sorbents, the functionalization of commercial three‐dimensional printable resins, or the coating of three‐dimensional printed devices with functional micro/nanomaterials. In addition, improved devices for liquid–liquid extraction such as extraction chambers, or phase separators are opening new possibilities for analytical method development combined with high‐performance liquid chromatography. The present review outlines the current state‐of‐the‐art of three‐dimensional printing in analytical sample preparation.  相似文献   

13.
Green chemistry principles for developing methodologies have gained attention in analytical chemistry in recent decades. A growing number of analytical techniques have been proposed for determination of organic persistent pollutants in environmental and biological samples. In this light, the current review aims to present state-of-the-art sample preparation approaches based on green analytical principles proposed for the determination of polybrominated diphenyl ethers (PBDEs) and metabolites (OH-PBDEs and MeO-PBDEs) in environmental and biological samples. Approaches to lower the solvent consumption and accelerate the extraction, such as pressurized liquid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, are discussed in this review. Special attention is paid to miniaturized sample preparation methodologies and strategies proposed to reduce organic solvent consumption. Additionally, extraction techniques based on alternative solvents (surfactants, supercritical fluids, or ionic liquids) are also commented in this work, even though these are scarcely used for determination of PBDEs. In addition to liquid-based extraction techniques, solid-based analytical techniques are also addressed. The development of greener, faster and simpler sample preparation approaches has increased in recent years (2003–2013). Among green extraction techniques, those based on the liquid phase predominate over those based on the solid phase (71% vs. 29%, respectively). For solid samples, solvent assisted extraction techniques are preferred for leaching of PBDEs, and liquid phase microextraction techniques are mostly used for liquid samples. Likewise, green characteristics of the instrumental analysis used after the extraction and clean-up steps are briefly discussed.  相似文献   

14.
In chemical analysis, sample preparation is frequently considered the bottleneck of the entire analytical method. The success of the final method strongly depends on understanding the entire process of analysis of a particular type of analyte in a sample, namely: the physicochemical properties of the analytes (solubility, volatility, polarity etc.), the environmental conditions, and the matrix components of the sample. Various sample preparation strategies have been developed based on exhaustive or non-exhaustive extraction of analytes from matrices. Undoubtedly, amongst all sample preparation approaches, liquid extraction, including liquid–liquid (LLE) and solid phase extraction (SPE), are the most well-known, widely used, and commonly accepted methods by many international organizations and accredited laboratories. Both methods are well documented and there are many well defined procedures, which make them, at first sight, the methods of choice. However, many challenging tasks, such as complex matrix applications, on-site and in vivo applications, and determination of matrix-bound and free concentrations of analytes, are not easily attainable with these classical approaches for sample preparation.  相似文献   

15.
固相萃取(Solid Phase Extraction SPE)是一种处于迅速发展中的样品前处理新技术,SPE技术在液体试样制备中以突出的优点已成为优先考虑的方法.本文旨在介绍SPE技术,并从配合物基本理论出发,首次提出“固定相络合法”富集环境水样中微量金属离子的思路.  相似文献   

16.
杨吉娜  刘丹阳  周婷 《色谱》2020,38(1):74-85
脂质作为细胞膜和亚细胞膜的主要结构成分,在能量来源、细胞信号传导等多种生物学过程中发挥着重要作用。近年来,脂质分析受到越来越多的关注,其中色谱-质谱联用技术在脂质分析中占据主导地位。由于样品基质复杂,样品前处理有富集痕量物质和减少基质干扰的作用,成为脂质分析中的一个关键步骤。该文综述了近年来基于色谱-质谱联用技术的脂质分析中样品前处理技术的研究进展和应用,对各种样品前处理技术进行了阐述和总结。基于液相的萃取方法有液-液萃取和单一有机溶剂萃取。基于固相的萃取方法包括固相萃取和固相微萃取。场辅助萃取方法包括超临界流体萃取、加压流体萃取、微波辅助萃取和超声辅助萃取。此外,还介绍了在线联用样品前处理方法和用于活体分析的样品前处理方法。最后,对基于色谱-质谱联用的脂质分析样品前处理技术存在的问题及发展趋势进行了探讨。样品前处理技术的发展将提高脂质分析的灵敏度、选择性和分析速度。  相似文献   

17.
Miniaturized sample preparation methods designed as the sample pretreatment for liquid phase separations, such as liquid chromatography, capillary electrophoresis and capillary electrochromatography, have been reviewed especially for the on-line coupling of the sample preparation process and the separation process. The development of the desorption interfaces for the effective combining of the sample preparation and subsequent liquid phase separations is briefly described along with the applications of the combined analytical systems to the analysis of complex sample mixtures such as biological and environmental matrices. Novel use of fine polymeric filaments as the extraction medium for microscale liquid phase separation methods are investigated and a comparison is made with other sample preparation techniques. Polymer coating onto the fibrous material is also introduced to further develop microscale sample preparation methods with improved extraction performance. Several other microscale sample preparation methods having a potential compatibility to the liquid phase separations are also described for future applications of these techniques.  相似文献   

18.
Summary A sample preparation method has been developed for the determination of chlorinated phenols in water. The method is based on a supported liquid membrane extraction system connected on-line to liquid chromatography with electrochemical detection. The supported liquid membrane technique utilizes a porous PTFE membrane. The membrane is impregnated with an organic solvent which forms a barrier between two aqueous phases and enables selective extraction. The technique can easily be coupled in a flow system. In this investigation five chlorinated phenols (1–5 chlorine atoms) were extracted from natural water samples. Extraction for 30 minutes resulted in detection limits of approximately 25 ng L–1.  相似文献   

19.
A static and exhaustive extraction mode of hollow fiber-supported liquid membrane was developed for field sample passive pretreatment of environmental water samples. The extraction device was prepared by immobilizing dihexyl ether in the wall of a polypropylene hollow fiber membrane (60 cm length, 50 μm wall thickness, and 280 μm id) as liquid membrane and filling the fiber lumen with 0.1 M NaOH as acceptor, and closing the two ends of the fiber with an aluminum foil. Passive extraction was conducted by immersing the device into 15 mL water samples modified with 0.01 M HCl and 20% m/v NaCl. Model analytes including 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol were transferred into acceptor with extraction efficiencies over 79% in 10 h at room temperature, and determined by high-performance liquid chromatography. The proposed method has the enrichment factor of 394-498 and LOD of 0.3-0.4 μg/L for the three chlorophenols. Humic acid and salinity in the environmentally relevant range had no significant influence on the extraction, and chlorophenols in various environmental waters were determined with spike recoveries between 71.6 and 120%. The static passive extraction nature benefited field sample pretreatment without power, whereas the exhaustive extraction mode effectively eliminated the sample matrix effects.  相似文献   

20.
Even after emergence of most advanced instrumental techniques for the final separation, detection, identification and determination of analytes, sample handling continues to play a basic role in environmental analysis of complex matrices. In fact, sample preparation steps are often the bottleneck for combined time and efficiency in many overall analytical procedures. Thus, it is not surprising that, in the last two decades, a lot of effort has been devoted to the development of faster, safer, and more environment friendly techniques for sample extraction and extract clean up, prior to actual instrumental analysis. This article focuses on the state of the art in sample preparation of environmental solid biological samples dedicated to persistent organic pollutants (POPs) analysis. Extraction techniques such as Soxhlet extraction, sonication-assisted extraction, supercritical fluid extraction (SFE), microwave-assisted extraction (MAE), pressurised liquid extraction (PLE) and matrix solid-phase dispersion (MSPD) are reviewed and their most recent applications to the determination of POPs in biota samples are provided. Additionally, classical as well as promising novel extraction/clean-up techniques such as solid phase microextraction (SPME) are also summarized. Finally, emerging trends in sample preparation able to integrate analytes extraction and their adequate clean-up are presented.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号