Liquid core waveguide-based optical spectrometry for field estimation of dissolved BTEX compounds in groundwater: A feasibility study

The utility of a liquid core waveguide (LCW) system for acting as a sentry monitor for compounds such as benzene, toluene, ethylbenzene, xylene (BTEX) in water was examined. A vapor-permeable LCW suitable for long path length absorbance spectroscopy based on a Teflon AF 2400 tube was fabricated. Multiwavelength spectroscopy in the near-UV was carried out using a fiber optic-based flashlamp-photodiode array (PDA) combination with hexane as the solvent in the waveguide core. Using multicomponent calibration, quantitation of benzene and toluene accurate to 6±5% could be conducted at sub-mg l⁻¹ levels in mixtures after a sampling period of 10 min.     

Excess volume of mixing of some electron-donating hydrocarbons with an electron-accepting liquid 1,2,4-trichlorobenzene

The excess volume of mixing of some electron-donating aromatic hydrocarbons like benzene, toluene,p-xylene, and mesitylene with an electronaccepting liquid 1,2,4-trichlorobenzene have been measured at 30°C. The results indicate that the interaction between the components increases as the electron-donating power of the hydrocarbons increases. The V _m ^e values are related to the ionization potentials of the hydrocarbons.     

Excess permittivities,excess refractive indices and NMR spectroscopic studies of solutions of 1,2-dibromoethane in aromatic hydrocarbons

Excess permittivities and excess refractive indices data for solutions of 1,2-dibromoethane (DBE) in benzene, toluene, o-xylene, m-xylene and p-xylene over the whole composition range at 25°C have been obtained. The analysis of excess dielectric properties suggests the existence of weak electron donor-acceptor type interactions between 1,2-dibromoethane (DBE) and aromatic hydrocarbons. The equilibrium constants and the dipole moments of the DBE-aromatic hydrocarbon complexes in solutions have been evaluated. Strneght of interaction increases with electron donating power of aromatic hydrocarbons. NMR spectroscopic studies made on these binary liquid systems also provide evidence for the existence of weak electron donor-acceptor type specific interactions between DBE and aromatic hydrocarbons.     

Benzene and toluene adsorption at low concentration on activated carbon fibres

The present study analyses the preparation of activated carbon fibres (ACFs) by the so-called “physical” activation method with steam or carbon dioxide and their application for benzene and toluene adsorption at low concentration (200 ppmv). ACFs have been scarcely studied for the adsorption of these pollutants at low concentration in gaseous phase, despite their interesting features regarding adsorption kinetics, bed pressure drop, possibility of conformation and others. Our results have shown that the preparation method used is suitable to produce ACFs with high adsorption capacities for benzene and toluene at the low concentration used. The fibre morphology of the ACFs does not enhance their performance, which results to be similar to other non-fibrous activated carbons such as granular, pellets and powders. Such good performance of the ACFs, leading to benzene and toluene adsorption capacities as large as 31 g benzene/100 g ACF or 53 g toluene/100 g ACF, can be explained due to their large volume of narrow micropores (<0.7 nm) developed upon activation and their low content in surface oxygen groups. Our results have also shown very good agreement between the adsorption results derived from dynamic adsorption experiments and from adsorption isotherms. As the relative pressure of the organic compound increases the corresponding fraction of narrow micropore volumes filled by benzene and toluene increases. For a given low and comparable relative pressure, toluene always occupies a larger fraction of narrow micropores than benzene.     

Application of a bisindocarbocyanine reagent for dispersive liquid–liquid microextraction of silver with subsequent spectrophotometric determination

A novel, simple and environmentally friendly procedure for silver determination has been developed. The method is based on ion associate formation of AgI₂⁻ and bisindocarbocyanine chloride (BDIC) reagent, followed by dispersive liquid–liquid microextraction (DLLME) of the ion associate formed and subsequent UV–Vis spectrophotometric detection. The structure of BDIC and the reaction mechanism were investigated by MS and NMR measurements and quantum chemical calculations.The optimum experimental conditions were found to be: pH 6; 0.1 mol L^{− 1} KI; 5 × 10^{− 5} mol L^{− 1} BDIC. The DLLME procedure was carried out using an auxiliary solvent for adjustment of solvent density. A 0.5 mL mixture of toluene as extraction solvent, carbon tetrachloride as auxiliary solvent and ethanol as disperser solvent was used. Ultrasonication of the organic phase was applied to decrease the value of the blank test. The absorbance of the coloured extracts obeys Beer's law in the range 0.07–2.1 mg L^{− 1} of Ag at 566 nm wavelength. The limit of detection, calculated from a blank test (n = 10) based on 3 s, is 0.03 mg L^{− 1} of Ag. The developed procedure was applied to the determination of silver in real samples such as Nano Silver and semi-conductor thin films.     

A Comparative Study of the PFP and BAB Models in Predicting the Surface and Transport Properties of Liquid Ternary Systems

Measurements of the surface tension, viscosity and density were carried out for three ternary and their nine contributing binary liquid systems, namely: (1) toluene + cyclohexane + carbon tetrachloride and its contributing binaries (toluene + cyclohexane), (cyclohexane + carbon tetrachloride), and (carbon tetrachloride + toluene); (2) benzene + cyclohexane  + toluene and its contributing binaries (benzene + cyclohexane), (cyclohexane  + toluene), and (toluene + benzene); and (3) carbon tetrachloride + cyclohexane + benzene and its contributing binaries, (carbon tetrachloride + cyclohexane), (cyclohexane + benzene) and (benzene + carbon tetrachloride), all at 298.15 K over a wide range of compositions. The surface and transport properties of these liquid ternary systems were also studied theoretically by two liquid models, those of PFP (Prigogine-Flory-Patterson) and BAB (Bertrand-Acree-Bruchfield). The excess surface thermodynamic and excess transport properties predicted with the use of these two models agree well with the experimental results. An attempt has also been made to explain the nature of the molecular interactions and forces involved in these liquid ternary systems.     

Factors affecting the sorption of Eu(III) on modified silica gel</p> </p>

Summary 8-Hydroxyquinoline in benzene, xylene, chloroform and toluene diluents was used to modify silica gel as a solid phase extractant (SPE) for the sorption of Eu(III) in batch extraction techniques. Influences of solid/liquid ratio, pH, metal ion concentration, particle size and temperature were studied. The optimum initial pH is 4.2, while the maximum sorption capacities for the prepared impregnated resins in benzene, xylene, chloroform and toluene diluents are 18.52, 14.98, 14.79 and 5.94 mg ^. g^-1, respectively. The sorption process is found to be affected by both metal ion concentration and particle size of the impregnated resin. Thermodynamic parameters for the sorption of Eu(III) were determined and the reaction is found to be exothermic and spontaneous with enthalpy-14.23 and-23.71 kJ ^. mol^-1 for benzene and xylene as diluents. Release of the element from the loaded solid particles into 0.01M HNO₃ is@85% and@53% from 8-HQ/benzene/silica gel and 8-HQ/xylene/silica gel.</p> </p>     

Studying the local structure of liquid in chloro- and alkyl-substituted benzene derivatives via the molecular scattering of light

The coefficients of scattering and the depolarization of scattered light are measured in liquid benzene, chlorobenzene, o-dichlorobenzene, o-chlorotoluene, toluene, and o-xylene in the temperature range of 293?368 K at a wavelength of 546 nm. Isothermic compressibility, internal pressure, and the functions of radial and orientational correlation are calculated for these liquids in the indicated temperature range, using the classical theory of molecular light scattering. We show that the local structure of these liquids is determined by orthogonal contacts between benzene rings (the T-configuration) and stacked (S-type) configurations. T-configurations predominate in benzene, chlorobenzene, and o-chlorotoluene, while toluene, o-xylene, and o-dichlorobenzene are characterized by S-configurations. It is also shown that the local structures of these liquids are reorganized in a certain temperature range.     

Characterization and use of a Raman liquid-core waveguide sensor using preconcentration principles

A novel Raman sensor using a liquid-core optical waveguide is reported, implementing a Teflon-AF 2400 tube filled with water. An aqueous analyte mixture of benzene, toluene and p-xylene was introduced using a 1000 μl sample loop to the liquid-core waveguide (LCW) sensor and the analytes were preconcentrated on the inside surface of the waveguide tubing. The analytes were then eluted from the waveguide using an acetonitrile-water solvent mixture injected via a 30 μl eluting solvent loop. The preconcentration factor was experimentally determined to be 14-fold, in reasonable agreement with the theoretical preconcentration factor of 33 based upon the sample volume to elution volume ratio. Raman spectra of benzene, toluene and p-xylene were obtained during elution. It was found that analytically useful Raman signals for benzene, toluene and p-xylene were obtained at 992, 1004 and 1206 cm⁻¹, respectively. The relative standard deviation of the method was 3% for three replicate measurements. The limit of detection (LOD) was determined to be 730 ppb (parts per billion by volume) for benzene, exceptional for a system that does not resort to surface enhancement or resonance Raman approaches. The Raman spectra of these test analytes were evaluated for qualitative and quantitative analysis utility.     

Influence of intermolecular interaction with the eluent on the retention and selectivity in liquid chromatography

Summary The influence of substance — eluent (water-isopropanol mixture) intermolecular interaction on the retention and selectivity of separation in liquid chromatography on silica gel with silanized surface has been investigated for benzene and toluene derivatives. The interaction greatly depends on the nature of the polar functional groups, their position in the benzene ring and the existence of intramolecular interaction.     

Carbon isotope fractionation of benzene and toluene by progressive evaporation

Evaporation is one of the key attenuation processes for near‐surface volatile organic compounds (VOCs) in the upper soil zone. Evaporation experiments were performed to investigate the carbon isotope fractionation of benzene and toluene during progressive and non‐equilibrium evaporation at room temperature. Considerable carbon isotope fractionation occurred during evaporative enrichment of benzene and toluene. The carbon isotope compositions of residual compounds increased exponentially with increasing evaporation. Thus, the remaining liquids become isotopically heavier, and the process follows a Rayleigh trend. This result is compatible with the direction of isotopic changes associated with both microbial degradation and volatilization of hydrocarbons previously observed in soil columns, but shows exactly the opposite behavior to previous equilibrium volatilization findings. Copyright © 2010 John Wiley & Sons, Ltd.     

Poly(N-n-butylitaconimide). Preparation and characterization

Poly(N-n-butylitaconimide) was prepared by radical polymerization in benzene and in bulk at 60°C and was subsequently fractionated at 30°C with benzene and methanol as solvent and nonsolvent, respectively. Relationships between molecular weight and intrinsic viscosity (Mark-Houwink-Sakurada equations) in tetrahydrofuran, benzene, and toluene at 30°C are established. From the Burchard-Stockmayer-Fixman plot, the characteristic ratio of this polymer is determined, and local chain conformation is discussed in relation to the termination process in radical polymerization. © 1993 John Wiley & Sons, Inc.     

Detection of s-triazine pesticides in natural waters by modified large-volume direct injection HPLC

There is a need for simple and inexpensive methods to quantify potentially harmful persistent pesticides often found in our water-ways and water distribution systems. This paper presents a simple, relatively inexpensive method for the detection of a group of commonly used pesticides (atrazine, simazine and hexazinone) in natural waters using large-volume direct injection high performance liquid chromatography (HPLC) utilizing a monolithic column and a single wavelength ultraviolet-visible light (UV-vis) detector. The best results for this system were obtained with a mobile phase made up of acetonitrile and water in a 30:70 ratio, a flow rate of 2.0 mL min⁻¹, and a detector wavelength of 230 nm. Using this method, we achieved retention times of less than three minutes, and detection limits of 5.7 μg L⁻¹ for atrazine, 4.7 μg L⁻¹ for simazine and 4.0 μg L⁻¹ for hexazinone. The performance of this method was validated with an inter-laboratory trial against a National Association of Testing Authorities (NATA) accredited liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) method commonly used in commercial laboratories.     

A permeation liquid membrane system for determination of nickel in seawater

The use of a permeation liquid membrane system for the preconcentration and separation of nickel in natural and sea waters and subsequent determination by atomic absorption spectroscopy is presented. 2-Hydroxybenzaldehyde N-ethylthiosemi-carbazone (2-HBET) in toluene is used as the active component of the liquid membrane. A study strategy based on a simplex design has been followed. Several chemical and physical parameters were optimized. Maximum permeation coefficient was obtained at a feed solution pH of 9.4, 0.3 mol l⁻¹ of HNO₃ in the stripping solution and 1.66 mmol l⁻¹ of 2-HBTE in toluene as carrier. The precision of the method was 4.7% at 95% significance level and a detection limit of 0.012 μg l⁻¹ of nickel was achieved. The preconcentration procedure showed a linear response within the studied concentration range from 3 to 500 μg l⁻¹ of Ni in the feed solution. The method was validated with different spiked synthetic seawater and certified reference water samples: TMDA-62 and LGC 6016, without matrix interferences and showing good concordance with the certified values, being the relative errors −5.9% and −2.2%, respectively. Under optimal conditions, the average preconcentration yield for real seawater samples was 98 ± 5%, with a nickel preconcentration factor of 20.83 and metal concentrations ranging between 2.8 and 5.4 μg l⁻¹.     

Optical constants and vibrational assignment of liquid toluene-d8 between 4000 and 450 cm at 25 °C

The optical constants (real and imaginary refractive indices) and imaginary molar polarizability spectrum of liquid toluene-d₈ are presented for the first time. The spectra were determined between 4000 and 450 cm⁻¹ at 25 °C. The fundamentals of toluene-d₈ in the liquid phase are revisited with the aid of gas phase spectra of toluene and toluene-d₈, ab initio calculations, and previously reported liquid assignments of toluene.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

The yield of solvent excited states in the radiolysis of cyclohexane solutions

It is confirmed by pulse radiolysis that emitting solvent excited states are produced in the radiolysis of n-hexane, methylcyclohexane and cyclohexane. The emission is quenched by benzene and benzene emission appears. Applying stern - volmer kinetics to emissions from solvent, benzene and toluene in cyclohexane a very high energy transfer rate constant, viz., k = 2.8 × 10¹¹M⁻¹ sec⁻¹ is obtained. The yield of the excited state of cyclohexane is not greater than 0.3, and it is concluded that the major part of the excited states of other aromatics produced in cyclohexane solutions comes from ion neutralisation.     

Thermodynamics of organic mixtures containing amines. X. Phase equilibria for binary systems formed by imidazoles and hydrocarbons: Experimental data and modelling using DISQUAC

(Solid + liquid) equilibrium (SLE) temperatures have been determined using a dynamic method for the systems (1H-imidazole, + benzene, + toluene, + hexane, or + cyclohexane; 1-methylimidazole + benzene, or + toluene, 2-methyl-1H-imidazole + benzene, + toluene, or + cyclohexane, and benzimidazole + benzene). In addition (liquid + liquid) equilibrium (LLE) temperatures have been obtained using a cloud point method for (1H-imidazole, + hexane, or + cyclohexane; 1-methylimidazole + toluene, and 2-methyl-1H-imidazole + cyclohexane). The measured systems show positive deviations from the Raoult’s law, due to strong dipolar interactions between amine molecules related to the high dipole moment of imidazoles. On the other hand, DISQUAC interaction parameters for the contacts present in these solutions and for the amine/hydroxyl contacts in (1H-imidazole + 1-alkanol) mixtures have been determined. The model correctly represents the available data for the examined systems. Deviations between experimental and calculated SLE temperatures are similar to those obtained using the Wilson or NRTL equations, or the UNIQUAC association solution model. The quasichemical interaction parameters are the same for mixtures containing 1H-imidazole, 1-methylimidazole, or 2-methyl-1H-imidazole and hydrocarbons. This may be interpreted assuming that they are members of a homologous series. Benzimidazole behaves differently.     

Applicability of corresponding-states group-contribution methods for the estimation of surface tension of multicomponent liquid mixtures at 298.15 K

Corresponding-states group-contribution methods (CSGC-ST1 and CSGC-ST2) have been applied to four binary liquid mixtures (propyl acetate + o-xylene, propyl acetate + m-xylene, propyl acetate + p-xylene and propyl acetate + ethyl benzene); two ternary (benzene + cyclohexane + toluene and n-hexane + cyclohexane + benzene) and two quaternary liquid mixtures (pentane + hexane + cyclohexane + benzene and pentane + hexane + benzene + toluene) at 298.15 K. In this work, the CSGC-ST2 method is modified and extended to multicomponent liquid mixtures. The excess magnitudes of surface tension were also calculated and graphs were plotted using Redlich–Kister method.     

Thermal degradation of copolymers of styrene and acrylonitrile. II. Reaction products

Hydrogen cyanide is a minor product of degradation of copolymers of styrene and acrylonitrile. The liquid products have been separated and identified by combined gas chromatography and mass spectrometry (GC-MS), as styrene, acrylonitrile, toluene, and benzene. The ratio of styrene to acrylonitrile monomers in the products is approximately twice that of the monomer units in the copolymers, and the ratios of styrene to toluene and benzene are the same as are obtained from pure polystyrene. These ratios were determined by using infrared spectral methods. The fraction of products volatile at the temperature of degradation but involatile at ambient temperature was also analyzed by using GC-MS. A series of four dimers and four trimers were fairly reliably identified. The residual material from copolymers containing up to 33.4% acrylonitrile is always soluble in toluene. The 50/50 copolymer and its residues are insoluble in toluene. Yellow coloration develops in the residues from high acrylonitrile copolymers at advanced stages of degradation. Infrared and ultraviolet spectra suggest that this is due to conjugated unsaturation in the polymer chain backbone which may be associated with the liberation of hydrogen cyanide from the acrylonitrile units.