Determination of thermodynamic properties of macroporous glycidyl methacrylate‐based copolymers by inverse gas chromatography

Macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME) was synthesized by suspension copolymerization and modified by ring‐opening reaction of the pendant epoxy groups with ethylene diamine (EDA). Inverse gas chromatography (IGC) at infinite dilution was applied to determine the thermodynamic interactions of PGME and modified copolymer, PGME‐en. The specific surface areas of the initial and modified copolymer samples were determined by the BET method, from low‐temperature nitrogen adsorption isotherms. The specific retention volumes, V, of 10 organic compounds of different chemical nature and polarity (nonpolar, donor, or acceptor) were determined in the temperature range 333–413 K. The weight fraction activity coefficients of test sorbates, , and Flory–Huggins interaction parameters, , were calculated and discussed in terms of interactions of sorbates with PGME and PGME‐en. Also, the partial molar free energy, , partial molar heat of mixing, , sorption molar free energy, ΔG, sorption enthalpy ΔH, and sorption entropy, ΔS, were calculated. Glass transitions in PGME and PGME‐en, determined from IGC data, were observed in the temperature range 373–393 K and 363–373 K, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2524–2533, 2005     

Film Growth and Surface Roughness with Effective Fluctuating Covalent Bonds in Evaporating Aqueous Solution of Reactive Hydrophobic and Polar Groups: A Computer Simulation Model

Summary: A computer simulation model is proposed to study film growth and surface roughness in aqueous (A) solution of hydrophobic (H) and hydrophilic (P) groups on a simple three dimensional lattice of size with an adsorbing substrate. Each group is represented by a particle with appropriate characteristics occupying a unit cube (i.e., eight sites). The Metropolis algorithm is used to move each particle stochastically. The aqueous constituents are allowed to evaporate while the concentration of H and P is constant. Reactions proceed from the substrate and bonded particles can hop within a fluctuating bond length. The film thickness ( ) and its interface width ( ) are examined for hardcore and interacting particles for a range of temperature ( ). Simulation data show a rapid increase in and followed by its non‐monotonic growth and decay before reaching steady‐state and near equilibrium ( ) in asymptotic time step limit. The growth can be described by power laws, e.g., with a typical value of in initial time regime followed by at . For hardcore system, the equilibrium film thickness ( ) and surface roughness ( ) seem to scale linearly with the temperature, i.e., at low and at higher . For interacting functional groups in contrast, the long time (unsaturated) film thickness and surface roughness, and decay rapidly followed by a slow increase on raising the temperature.

Growth of the average film thickness at a temperature .     

Combining Modular Ligation and Supramolecular Self‐Assembly for the Construction of Star‐Shaped Macromolecules

A well‐defined random copolymer of styrene (S) and chloromethylstyrene (CMS) featuring lateral chlorine moieties with an alkyne terminal group is prepared (P(S‐co‐CMS), = 5500 Da, PDI = 1.13). The chloromethyl groups are converted into Hamilton wedge (HW) entities (P(S‐co‐HWS), = 6200 Da, PDI = 1.13). The P(S‐co‐HWS) polymer is subsequently ligated with tetrakis(4‐azidophenyl)methane to give HW‐functional star‐shaped macromolecules (P(S‐co‐HWS))₄, = 25 100 Da, PDI = 1.08). Supramolecular star‐shaped copolymers are then prepared via self‐assembly between the HW‐functionalized four‐arm star‐shaped macromolecules ( P(S‐co‐HW )) ₄ and cyanuric acid (CA) end‐functionalized PS (PS–CA, = 3700 Da, PDI = 1.04), CA end‐functionalized poly(methyl methacrylate) (PMMA–CA, = 8500 Da, PDI = 1.13) and CA end‐functionalized polyethylene glycol (PEG–CA, = 1700 Da, PDI = 1.05). The self‐assembly is monitored by ¹H NMR spectroscopy and light scattering analyses.     

Radical Ions of a Bishomobinaphthylene Containing two 1,6-methano[10]annulene moieties: An ESR and ENDOR study

The radical cation and the radical anion of ‘syn’-cyclobuta[1,2-c:3,4-c′]di-1,6-methano[10]annulene (‘syn’-4a,12a:6a, 10a-bishomobinaphthylene; 3 ) have been characterized by their hyperfine data. The highly resolved ESR spectrum of $ 3^{+ \atop \dot{}} $ is dominated by a triplet splitting from the outer pair of methano β-protons (H_o). In contrast, the ESR spectrum of $ 3^{- \atop \dot{}} $ is poorly resolved with the largest coupling constants arising from perimeter α-protons. The different hyperfine features of $ 3^{+ \atop \dot{}} $ and $ 3^{- \atop \dot{}} $ are rationalized by MO models. The SOMO of $ 3^{+ \atop \dot{}} $ ψ_SA(b₁), has substantial LCAO coefficients of the same sign at the bridged atoms C(1), C(6), C(11), and C(16), whereas in the SOMO of $ 3^{- \atop \dot{}} $, ψ_SS(a₁), the four atoms lie in the vertical nodal planes. The large width and the reluctance to saturation of the lines in the ESR spectrum of $ 3^{- \atop \dot{}} $ are attributed to the near-degeneracy of the lowest antibonding MO's. Due to their similar nodal properties, the SOMO's of $ 3^{- \atop \dot{}} $ and the radical anions of binaphthylene ( 4 ), 1,6-methano[10]annulene ( 1 ), and naphthalene ( 2 ) are interrelated. Moreover, because the cyclic π-systems in 3 and 1 deviate in the same way from planarity, the effect of such distortions on the coupling constants, a_Hμ, of the perimeter α-protons in $ 3^{- \atop \dot{}} $ and $ 1^{- \atop \dot{}} $ should be comparable. Indeed, on going from $ 4^{- \atop \dot{}} $ to $ 3^{- \atop \dot{}} $, the |a_Hμ| values are reduced exactaly by half as much as the corresponding values on passing from $ 2^{- \atop \dot{}} $ to $ 3^{- \atop \dot{}} $, of which the cyclic π-systems are twice contained in $ 4^{- \atop \dot{}} $ and $ 3^{- \atop \dot{}} $ respectively.     

Rearrangements of Radical Cations of [2.2]Paracyclophanes and of a bridged [14]annulene to those of pyrenes: An ESR and ENDOR study

ESR and ENDOR studies have been carried out on the radical cations obtained consecutively by reaction of trans-10b, 10c-dimethyl-10b, 10c-dihydropyrene ( 4 ) with AlCl₃ in CH₂C1₂. The primarily formed ${\bf 4}^{+ \atop \dot{}}$ rearranges at 253 K to the radical cation(s) of 1,6- ( 5a ) and/or 1,8-dimethylpyrene ( 5b ). At 323 K, the spectra of ${\bf 5a}^{+ \atop \dot{}}$/${\bf 5b}^{+ \atop \dot{}}$ are replaced by that of the highly persistent radical cation of 1,3,6,8-tetramethylpyrene ( 6 ). Surprisingly, ${\bf 6}^{+ \atop \dot{}}$ is also the only observable paramagnetic product resulting from a treatment of 4,5,7,8- ( 1 ), 4,7,13,16- ( 2 ), and 4,5,12,13-tetramethyl[2.2]paracyclophane ( 3 ) with AlCl₃ in CH₂Cl₂ at 353 K. The structures of the intermediates in the rearrangement [${\bf 1}^{+ \atop \dot{}}$, ${\bf 2}^{+ \atop \dot{}}$, ${\bf 3}^{+ \atop \dot{}}$] → ${\bf 6}^{+ \atop \dot{}}$ are discussed.     

The first normal stress difference and viscosity in shear of liquid crystalline solutions of hydroxypropylcellulose: new experimental data and theory

The constitutive equations for liquid crystalline polymers recently proposed by one of us [1] are applied here to interpret the behaviour of the shear viscosity η and the first normal stress difference N₁() measured for liquid crystalline (LC) solutions of hydroxypropylcellulose in acetic acid. N₁( ) is observed to change from positive to negative and again to positive, as the shear rate increases, at lower concentrations, in the LC phase. The -values at which N₁ changes sign depend on the molecular mass (degree of polymerization) and on the concentration. η shows a small Newtonian plateau at low shear rates and a strong shear-thinning at higher values of . The rate of decrease of η in this region shows an “hesitation” similar to one previously observed in LC solutions of poly-γ-benzyl-L-glutamate PBLG. All these observations can be rationalized within the frame-work of Martins' theory. The expressions for N₁() and η derived from this theory fit very well (quantitatively) to the experimental data and some fundamental viscoelastic parameters of the system under study are thereby obtained for the first time.     

Direct Cyclodextrin‐Mediated Ring Opening Polymerization of ϵ‐Caprolactone in the Presence of Yttrium Trisphenolate Catalyst

Unmodified β‐cyclodextrin has been directly used to initiate ring‐opening polymerization of ϵ‐caprolactone in the presence of yttrium trisphenolate. Well‐defined cyclodextrin (CD)‐centered star‐shaped poly(ϵ‐caprolactone)s have been successfully synthesized containing definite average numbers of arms (N_arm = 4–6) and narrow polydispersity indexes (below 1.10). The number‐average molecular weight ( ) and average molecular weight per arm ( ) are controlled by the feeding molar ratio of monomer to initiator. The prepared star‐PCL with of 2.7 × 10³ is in fully amorphous and that with of 13.3 × 10³ is crystallized. In addition, the obtained poly(e‐caprolactone) (PCL) stars with various molecular weights have different solubilities in methanol and tetrahydrofuran, which can be applied for further modifications.     

The Radical Cations and the Radical Anions of Some Weitz-Type S-Donors

The radical cations and the radical anions of 1,6-dithiapyrene ( 1 ) and 3,10-dithiaperylene ( 2 ) as well as those of three further Weitz-type S-donors 3 , 4 , and 5 have been studied by ESR spectroscopy. The experimental findings for (widths and behaviour on saturation of hyperfine lines) suggest that the ground state of this radical anion is effectively degenerate. With the exception of , the ESR studies of all radical ions could be complemented by the use of the ENDOR and general TRIPLE resonance techniques. In addition to proton hyperfine data, ³³S coupling constants have been determined for (0.53mT), (0.46mT), and (0.34mT); they are in agreement with the predicted substantial π-spin populations at the S-atoms.     

The Radical Ions of Naphtho [1,8-cd]-[1,2,6]thiadiazine and Some of Its Derivatives

The radical cations and anions of naphtho [1,8-cd]-[1,2,6]thiadiazine (1) and 6,7-dihydroacenaphtho [5, 6-cd]-[1,2,6]thiadiazine (2) , as well as the radical anion of acenaphtho [5, 6-cd]-[1,2,6]thiadiazine (3) have been characterized by ESR. spectroscopy. The π-spin distributions in the radical cations \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\oplus \atop \dot{}}$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ 2^{\oplus \atop \dot{}}$\end{document} strongly resemble those in the iso-π-electronic phenalenyl radical. A prominent feature of the radical anions \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}}$\end{document}, \documentclass{article}\pagestyle{empty}\begin{document}$ 2^{\ominus \atop \dot{}}$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ 3^{\ominus \atop \dot{}}$\end{document} is the substantial localization of the π-spin population on the thiadiazine fragment. These findings are satisfactorily accounted for by HMO models using conventional heteroatom parameters.     

Ab initio molecular orbital study on the structures and energetics of CH3OH\documentclass{article}\pagestyle{empty}\begin{document}$_{2}^{+}$\end{document}(H2O)n and CH3SH\documentclass{article}\pagestyle{empty}\begin{document}$_{2}^{+}$\end{document}(H2O)n in the gas phase

The purpose of this study was to calculate the structures and energetics of CH₃OH$_{2}^{+}$(H₂O)_n and CH₃SH$_{2}^{+}$(H₂O)_n in the gas phase: we asked how the CH₃OH$_{2}^{+}$ and CH₃SH$_{2}^{+}$ moieties of CH₃OH$_{2}^{+}$(H₂O)_n and CH₃SH$_{2}^{+}$(H₂O)_n change with an increase in n and how can we reproduce the experimental values ΔH°_n−1,n. For this purpose, we carried out full geometry optimizations with MP2/6‐31+G(d,p) for CH₃OH$_{2}^{+}$(H₂O)_n (n=0,1,2,3,4,5) and CH₃SH$_{2}^{+}$(H₂O)_n (n=0,1,2,3,4). We also performed a vibrational analysis for all clusters in the optimized structures to confirm that all vibrational frequencies are real. All of the vibrational frequencies of these clusters are real, and they correspond to equilibrium structures. For CH₃OH$_{2}^{+}$(H₂O)_n, when n increases, (1) the C O bond length decreases, (2) the C H bond lengths do not change, (3) the O H bond lengths increase, (4) the OCH bond angles increase, (5) the COH bond angles decrease, (6) the charge on CH₃ becomes less positive, and (7) these predicted values, except for the O H bond lengths of CH₃OH$_{2}^{+}$(H₂O)_n, approach the corresponding values in CH₃OH. The C O bond length in CH₃OH$_{2}^{+}$(H₂O)₅ is shorter than that in CH₃OH$_{2}^{+}$ in the gas phase by 0.061 Å at the MP2/6‐31+G(d,p) level. Except for the S H bond lengths in CH₃SH$_{2}^{+}$(H₂O)_n, however, the structure of the CH₃SH$_{2}^{+}$ moiety does not change with an increase in n. © 2000 John Wiley & Sons, Inc. J Comput Chem 22: 125–131, 2001     

Amphiphilic Poly(4‐acryloylmorpholine)/Poly[2‐(N‐carbazolyl)ethyl acrylate] Random and Block Copolymers Synthesized by NMP

A series of random copolymers and block copolymers containing water‐soluble 4AM and fluorescent VAK are synthesized by NMP. The homopolymerizations of 4AM and VAK and 4AM/VAK random copolymerization are performed in 50 wt% DMF using 10 mol% SG1, resulting in a linear increase in versus conversion, and final polymers with narrow molecular weight distributions ( < 1.4). Reactivity ratios r_VAK = 0.64 ± 0.52 and r_4AM = 0.86 ± 0.66 are obtained for the 4AM/VAK random copolymerization. In addition, a poly(4AM) macroinitiator is used to initiate a surfactant‐free suspension polymerization of VAK. After 2.5 h, the resulting amphiphilic block copolymer has = 12.6 kg · mol^?1, = 1.48, molar composition F_VAK = 0.38 with latex particle sizes between 270 and 475 nm.

     

Incorporating glycidyl methacrylate into block copolymers using poly(methacrylate‐ran‐styrene) macroinitiators synthesized by nitroxide‐mediated polymerization

Methyl methacrylate/styrene (MMA/S), ethyl methacrylate/styrene (EMA/S) and butyl methacrylate/styrene (BMA/S) feeds (>90 mol % methacrylate) were copolymerized in 50 wt % p‐xylene at 90 °C with 10 mol % of additional SG1‐free nitroxide mediator relative to unimolecular initiator (BlocBuilder^®) to yield methacrylate rich copolymers with polydispersities _w/ _n = 1.23–1.46. k_pK values (k_p = propagation rate constant, K = equilibrium constant) for MMA/S copolymerizations were comparable with previous literature, whereas EMA/S and BMA/S copolymerizations were characterized by slightly higher k_pK's. Chain extensions with styrene at 110 °C initiated by the methacrylate‐rich macroinitiators (number average molecular weight _n = 12.9–33.5 kg mol^?1) resulted in slightly broader molecular weight distributions with _w/ _n = 1.24–1.86 and were often bimodal. Chain extensions with glycidyl methacrylate/styrene/methacrylate (GMA/S/XMA where XMA = MMA, EMA or BMA) mixtures at 90 °C using the same macroinitiators resulted frequently in bimodal molecular weight distributions with many inactive macroinitiators and higher _w/ _n = 2.01–2.48. P(XMA/S) macroinitiators ( _n = 4.9–8.9 kg mol^?1), polymerized to low conversion and purified to remove “dead” chains, initiated chain extensions with GMA/MMA/S and GMA/EMA/S giving products with _w/ _n ～ 1.5 and much fewer unreacted macroinitiators (<5%), whereas the GMA/BMA/S chain extension was characterized by slightly more unreacted macroinitiators (～20%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2574–2588, 2009     

A Helical Poly(macromonomer) Consisting of a Polyacetylene Main Chain and Polystyrene Side Chains

A novel helical poly(macromonomer) [poly(M‐PS): absolute = 82 800–252 000, determined by GPC/RALLS] with a polyacetylene main chain and polystyrene (PS) side chains was synthesized by the polymerization of acetylene‐terminated M‐PS [ = 2 000, / = 1.20, = 18] with an Rh catalyst. M‐PS was prepared by ATRP of styrene using the acetylene‐containing initiator 2‐bromo‐2‐methylpropionic acid (S)‐1‐methylpropargyl ester ( l ). In solutions, poly(M‐PS) exhibited an intense CD signal at 345–355 nm, indicating that it possessed a predominantly one‐handed helical conformation. Poly(M‐PS) had a stable helical conformation irrespective of solvents and temperature.

     

Palladium(II) and platinum(II) complexes of (1R,2R)‐(−)‐1,2‐diaminocyclohexane (DACH) with various carboxylato ligands and their cytotoxicity evaluation

Several palladium(II) and platinum(II) complexes analogous to oxaliplatin, bearing the enantiomerically pure (1R,2R)‐(?)‐1,2‐diaminocyclohexane (DACH) ligand, of the general formula {MX₂[(1R,2R)‐DACH]}, where M = Pd or Pt, X (COO)₂, CH₂(COO)₂, , , {1,1′‐C₅H₈(CH₂COO)₂}, [1,1′‐C₆H₁₀(CH₂COO)₂], [1,1′‐(COO)₂ferrocene], , , , MeCOO and Me₃CCOO, were synthesized. All the complexes prepared were characterized physicochemically and spectroscopically. Some selected complexes were screened in vitro against several tumor cell lines and the results were compared with reference standard drug, oxaliplatin. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of Polyaniline/Au0 Nanocomposites Modified Electrode and Application for Hydrazine Detection

The PANI/Au₀ nanocomposite films were successfully prepared on glassy carbon electrode (GCE) using a simple alternate adsorption of water soluble polyaniline (PANI) and . The growth of the films was monitored by UV? Vis spectroscopy and cyclic voltammetry. was in‐situ reduced in the film due to the redox interaction between PANI and , without extra reductant. The ultrafine Au nanoparticles with the size of 2–4 nm were observed by transmission electron spectroscopy. The existence of zero‐valence Au nanocrystals (Au₀) was confirmed by X‐ray photoelectron spectroscopy, X‐ray Diffraction and FTIR. PANI in the nano‐structured PANI/Au₀ composite films displayed a good redox activity in neutral pH solution. The as‐obtained PANI/Au₀/GCE presents an excellent electrocatalytic activity to hydrazine oxidation, and the mechanism of hydrazine oxidation was studied. The calibration curve on (PANI/Au₀)₅/GCE was obtained in the concentration range of 0.01–6 mM with the detection limit of 1 µM (S/N>3). The modified electrode has a great potential for hydrazine sensor application due to its ease of fabrication, good reproducibility and high stability.     

Lewis acid‐base properties of cellulose acetate butyrate by inverse gas chromatography

The dispersive component of the surface‐free energy, , of cellulose acetate butyrate (CAB) has been determined using the net retention volume, V_N, of n‐alkanes (C₅? C₈) probes in the temperature range 323.15–393.15 K. The values decrease nonlinearly with increase in temperature, and the temperature coefficients of are ? 0.32 (mJ/m²K) and ? 0.10 (mJ/m²K) in the range 323.15–353.15 K and 353.15–393.15 K, respectively. This variation in has been attributed to the structural changes that take place on the surface of CAB at ～353.15 K. The specific components of the enthalpy of adsorption, , and entropy of adsorption, , calculated using V_N of polar solutes are negative. The values are used to evaluate Lewis acidity constant, K_a, and Lewis basicity constant, K_b, for the CAB surface. The K_a and K_b values are found to be 0.126 and 1.109, respectively, which suggest that the surface is predominantly basic. The K_a and K_b results indicate for the necessary surface modifications of CAB which act as biodegradable adsorbent material. Copyright © 2010 John Wiley & Sons, Ltd.     

Cluster ions in the secondary ion mass spectrometry of choline and acetylcholine halides

Liquid secondary ion mass spectra of choline and acetylcholine halides exhibit several series of cluster ions whose origins were investigated using B/E and B²/E linked-scan techniques. In the case of choline halides three series of cluster ions were identified as (Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂OH + nM), (Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂OMe + nM) and (Me₃N$ \mathop {\rm N}\limits^ + $CH₂CH₂OH · Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂O^? + nM), while (CH₃COOCH₂CH₂$ \mathop {\rm N}\limits^ + $Me₃ + nM), (Me₃$ \mathop {\rm N}\limits^ + $CH₂CH₂OH + nM) and (CH₂ = CH$ \mathop {\rm N}\limits^ + $Me₃ + nM) were observed in the spectra of acetylcholine halides. For these cluster ions, bimolecular reactions induced on ion bombardment under secondary ion mass spectrometric conditions are discussed.     

The kinetics of the reaction: Br + C3H6 ⇌ HBr + C3H5

Studies of the reaction of Br + propylene to produce HBr and allyl radical were made using VLPR (Very Low Pressure Reactor) over the range 263–363 K. Apparent bimolecular rate constants k were found to vary in an inverse manner with the initial concentration of bromine atoms introduced into the reactor. Plots of k against [Br] give straight lines whose intercepts were taken to be the true bimolecular, metathesis rate constant k₁. The reaction scheme is where k₂ ? k₁ and k_?1 [HBr] is negligibly small under our conditions. Arrhenius parameters for k₁ were assigned for linear and bent transition states and shown to give excellent fits to the observed intercepts. where θ = 2.303 RT (kcal mol^?1). The dependence of k on [Br] is accounted for in terms of the reactivity of Br* (²P_1/2) produced in the microwave discharge. The activation energy for the metathesis reaction of Br* with propylene is shown to be very small.     

Synthesis,characterization and thermal behaviour of four homoleptic titanium silanolates

Four titanium silanolates Ti(OSiR₂R′)₄ (1, R = Ph, R′ = ^tBu; 2, R = R′ = Ph; 3, R = R′ = ⁱPr; 4, R = Me, R′ = ^tBu) were synthesised starting from Ti(OⁱPr)₄ and the corresponding silanol, and their thermally induced decomposition was studied. Colourless single crystals of Ti(OSiPh Bu) CHCl C₇H₈ ( CHCl C₇H₈) were obtained from a mixture of chloroform and toluene (1:1) at ?20 °C. The compound crystallizes in the space group R3 c with Z = 18. The metal atom shows an almost ideal tetrahedral coordination, as is demonstrated by the O? Ti? O angles of 108.4(1)–111.1(1)°. Copyright © 2005 John Wiley & Sons, Ltd.