Rapid access to homoallylic alcohols via Pd(OAc)2 catalyzed Barbier type allylation in presence of DMAP

DMAP was found to accelerate significantly the rate of Pd(OAc)₂ catalyzed Barbier type allylation of carbonyl compounds by allylbromide using SnCl₂·2H₂O as reducing agent. Both aldehyde as well as ketones produced excellent yields within a short reaction time in the presence of 3 mol % of Pd(OAc)₂ and 12 mol % of DMAP at room temperature. Aldehydes could be allylated within 5–10 min whereas, in case of ketones, the reaction completes in 45–120 min.     

Osmium (VI) catalyzed chemoselective oxidation of allylic and benzylic alcohols

A mild and highly chemoselective approach to oxidation of allylic, electron rich/deficient benzylic, and heterocyclic alcohols employing catalytic quantities of K₂[OsO₂(OH)₄] (3 mol %) and chloramine-T (50 mol %) is described. The protocol offers short reaction times (25 min–2 h), controlled oxidation, and tolerance to a variety of substrates. A systematic mechanistic study based on the LC-ESI-MS/MS reveals the presence of imidotriooxoosmium species which further reacts with alcohol to give the oxidized product.     

The DFT and ab initio investigations on the mechanism of CF3O2 + H reaction

The mechanisms for the reaction of CF₃O₂ with atomic hydrogen were studied with ab initio and DFT methods. The results reveal that the reaction could take place on the singlet and triplet potential energy surfaces (PES). For the singlet PES, addition/elimination and substitution mechanisms are determined, and the former one is dominant. The most favorable channel involves the association of CF₃O₂ with H atom to form CF₃O₂H (IM1) via a barrierless process, and then the O–O bond dissociates to give out CF₃O + OH. The secondary product might be CF₃OH + O, formed from the O–O bond cleavage in the initial adduct CF₃O(H)O (IM2). Other products such as CF₃ + O₂H, HF + CF₂O₂ and O₂ + CHF₃ are of no importances because of higher barriers. On the triplet PES, only substitution mechanism is located. With higher barriers involving, the channels on the triplet PES could be negligible compared with the channels on the singlet PES.     

Density-functional study for the NOx (x = 1, 2) dissociation mechanism on the Cu(1 1 1) surface

Spin-polarized density functional theory calculation is employed to study the adsorption and dissociation of NO₂ molecule on Cu(1 1 1) surface. It is shown that the most favorable adsorption structure is the NO₂ (T,T-O-,O′-nitrito) configuration which has an adsorption energy of −1.49 eV. The barriers for step-wise NO₂ dissociation reaction, NO_2(g) → N_(a) + 2O_(a), are 1.05 (for O–N–O bond activation), and 2.08 eV (for N–O bond activation), respectively, and the entire process is 0.6 eV exothermic. The energetics of single N–O dissociation with and without the presence of N atom or O atom on the surface are also calculated. The results indicate that in the presence of O atom on Cu(1 1 1) surface would raise the N–O dissociation barrier, whereas in the presence of N atom decrease it. The interaction nature between adsorbates and substrate is analyzed by the local density of states (LDOS) calculation.     

Acetamide/SO2Cl2 as an efficient reagent for Friedel–Craft’s acylation of aromatic compounds under ultrasonic and microwave conditions

Acetamide/SO₂Cl₂ reagent has been developed for effective Friedel–Craft’s acylation of aromatic compounds. Acylation of aromatic compounds with acetamide/SO₂Cl₂ was much more effective and faster than analogous (acetamide/SOCl₂) and (acetamide/POCl₃) reagents even under conventional conditions. However, microwave and ultrasonic assisted reactions afforded high yields of products in very short reaction times (30–40 min under sonication and 3–4 min under microwave assisted conditions).     

Ab initio quantum chemical studies on the reactions of CF3O2 with OH

The potential energy surface for the CF₃O₂ + OH reaction has been theoretically investigated using the DFT (B3LYP/6-311G(d,p)) level of theory. Both singlet and triplet potential energy surfaces are investigated. The reaction mechanism on the triplet surface is simple. However, the reaction mechanism on the singlet surface is more complicated. It is revealed that the formation of CF₃O + HO₂ is the dominant channel on the triplet surface. The potential energy surface (PES) for this reaction has been given according to the relative energies calculated at the DFT/B3LYP/6-311G(d,p) level. Because this reaction involves both triplet and singlet states, triplet–singlet intersystem crossing (ISC) crossing also have been investigated in this paper.     

Theoretical study on the reaction mechanism of CH4 with CaO

The reaction pathways and energetics for the reaction of methane with CaO are discussed on the singlet spin state potential energy surface at the B3LYP/6-311+G(2df,2p) and QCISD/6-311++G(3df,3pd)//B3LYP/6-311+G(2df,2p) levels of theory. The reaction of methane with CaO is proposed to proceed in the following reaction pathways: CaO + CH₄ → CaOCH₄ → [TS] → CaOH + CH₃, CaO + CH₄ → OCaCH₄ → [TS] → HOCaCH₃ → CaOH + CH₃ or [TS] → CaCH₃OH → Ca + CH₃OH, and OCaCH₄ → [TS] → HCaOCH₃ → CaOCH₃ + H or [TS] → CaCH₃OH → Ca + CH₃OH. The gas-phase methane–methanol conversion by CaO is suggested to proceed via two kinds of important reaction intermediates, HOCaCH₃ and HCaOCH₃, and the reaction pathway via the hydroxy intermediate (HOCaCH₃) is energetically more favorable than the other one via the methoxy intermediate (HCaOCH₃). The hydroxy intermediate HOCaCH₃ is predicted to be the energetically most preferred configuration in the reaction of CaO + CH₄. Meanwhile, these three product channels (CaOH + CH₃, CaOCH₃ + H and Ca + CH₃OH) are expected to compete with each other, and the formation of methyl radical is the most preferable pathway energetically. On the other hand, the intermediates HCaOCH₃ and HOCaCH₃ are predicted to be the energetically preferred configuration in the reaction of Ca + CH₃OH, which is precisely the reverse reaction of methane hydroxylation.     

Aniline–terephthalaldehyde resin p-toluenesulfonic acid (ATRT) salt as efficient mild polymeric solid acid catalyst

Aniline–terephthalaldehyde resin p-toluenesulfonic acid (ATRT) salt was easily prepared by the reaction of aniline with 1.25 equiv of terephthalaldehyde in the presence of 1.0 equiv of p-toluenesulfonic acid at 75 °C for 24 h in EtOH. ATRT efficiently catalyzed the tetrahydropyranylation of alcohols and deprotection of tetrahydropyranyl (THP), triethylsilyl (TES), and tert-butyldimethylsilyl (TBDMS) ethers. Deprotection of dodecyl THP ether and dodecyl TBDMS ether catalyzed by ATRT proceeded faster than those by pyridinium p-toluenesulfonate (PPTS). ATRT was reused without significant loss of activities.     

High-pressure phase behaviour of binary (CO2 + nicotine) and ternary (CO2 + nicotine + solanesol) mixtures

This work paper presents vapour–liquid equilibrium (VLE) data for binary (CO₂ + nicotine) and ternary (CO₂ + nicotine + solanesol) mixtures, at 313.2 K and 6, 8 and 15 MPa. The (CO₂ + nicotine) system exhibits three phases (L₁L₂V) in equilibrium at 8.37 MPa. It is estimated that this system most likely follows the type-III phase behaviour. In the ternary system, the presence of solanesol in the vapour phase was detected only at the pressure of 15 MPa. At this pressure, partition coefficients and separation factors for solanesol/nicotine were calculated for different initial nicotine/solanesol compositions and a strong influence of composition was found. The results were modelled using the Peng–Robinson equation of state (PR EOS) coupled with the Mathias–Klotz–Prausnitz (MKP) mixing rule (PR–MKP model). Good correlations of the binary data, particularly in the case of the (CO₂ + nicotine) mixture, were obtained. However, the model could not correlate the ternary data.     

A novel nonenzymatic sensor based on LaNi0.6Co0.4O3 modified electrode for hydrogen peroxide and glucose

In this paper, LaNi_0.6Co_0.4O₃ (LNC) nanoparticles were synthesized by the sol–gel method, and the structure and morphology of LNC nanoparticles were characterized by X-ray diffraction spectrum, scanning electron microscopy and transmitting electron microscopy. And then, LNC was used to modify carbon paste electrode (CPE) without any adhesive to fabricate hydrogen peroxide and glucose sensor, and the results demonstrated that LNC exhibited strong electrocatalytical activity by cyclic voltammetry and amperometry. In H₂O₂ determination, linear response was obtained in the concentration range of 10 nM–100 μM with a detection limit of 1.0 nM. In glucose determination, there was the linear region of 0.05–200 μM with a detection limit of 8.0 nM. Compared with other reports, the proposed sensor also displayed high sensitivity toward H₂O₂ (1812.84 μA mM⁻¹ cm⁻²) and glucose (643.0 μA mM⁻¹ cm⁻²). Moreover, this prepared sensor was applied to detect glucose in blood serum and hydrogen peroxide in toothpaste samples with satisfied results, indicating its possibility in practical application.     

Stimulated Raman scattering measurements of H2 vibration–vibration transfer

We present a new set of V–V rate coefficients for vibrational levels 0–5 in H₂ at 300 K, measured using a stimulated Raman–spontaneous Raman pump/probe apparatus. The measured rate of the non-resonant process, H₂(v = 1) + H₂(v = 1) → H₂(v = 0) + H₂(v = 2), is consistent with the previously reported experimental value of Kreutz et al. However, semi-classical predictions of such non-resonant processes, using the identical inter-molecular potential and methodology to that given by Cacciatore and Billing, results in rates which are too slow, by a factor of approximately 3. For the “resonant” V–V process, H₂(v = 1) + H₂(v = 0) → H₂(v = 0) + H₂(v = 1), the semi-classical rate is found to be too slow by an even larger factor, of approximately 30, compared to the experimental rate, but consistent with the previously reported experimental result of Farrow and Chandler. Further, unlike the semi-classical model prediction in which the (1, 1 → 2, 0) process rate is predicted to exceed that of the (1, 0 → 0, 1) process, the experimental data shows it to be a factor of approximately 2.5 less, suggesting that semi-classical methods that treat the rotational motion classically are unsuitable for the highly anharmonic H₂ molecule. The ratio of pure rotation and rotation–vibration Raman cross sections for scattering from levels 0 and 1 is also determined, with results which agree with calculations of Schwartz and LeRoy, but are somewhat larger than previous experimental results of Cureton.     

Ab initio/DFT theory and multichannel RRKM study on the mechanisms and kinetics for the CH3S + CO reaction

The potential energy surface for the reaction of CH₃S with CO was calculated at the G3MP2//B3LYP/6-311++G(d,p) level. The rate constants for feasible channels leading to several products were calculated by TST and multichannel-RRKM theory. The results show that addition–elimination mechanism is dominant, while hydrogen abstraction mechanism is uncompetitive. The major channel is the addition of CO to CH₃S leading to an intermediate CH₃SCO which then decomposes to CH₃ + OCS. In the temperature range of 200–3000 K, the overall rate constants are positive temperature dependence and pressure independence, and it can be described by the expression as k = 1.10 × 10⁻¹⁶T^1.57exp(−3359/T) cm³ molecule⁻¹ s⁻¹. At temperature between 208 and 295 K, the calculated rate constants are in good agreement with the experimental upper limit data. At T = 1000 and 2000 K, the major product is CH₃ + OCS at lower pressure; while at higher pressure, the stabilization of IM1 is dominant channel.     

An efficient protocol for the preparation of MOM ethers and their deprotection using zirconium(IV) chloride

An efficient protocol for the preparation of MOM ethers from alcohols and formaldehyde dimethyl acetal (DMFA) using ZrCl₄ (10 mol %) at room temperature under solvent free conditions has been developed. Similarly, the same Lewis acid, ZrCl₄ (50 mol %), in isopropanol at reflux was utilised for the deprotection of MOM ethers.     

Polythiophene-coated Fe3O4 superparamagnetic nanocomposite: Synthesis and application as a new sorbent for solid-phase extraction

In the present work, a novel type of superparamagnetic nanosorbent, polythiophene-coated Fe₃O₄ nanoparticles (Fe₃O₄@PTh NPs), have been successfully synthesized. The synthesized NPs were characterized by scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR) spectroscopy, and thermal gravimetric analysis (TGA). The synthesized Fe₃O₄@PTh NPs were applied as an efficient sorbent for extraction and preconcentration of several typical plasticizer compounds (di-n-butyl phthalate (DBP), di-(2-ethylhexyl) phthalate (DEHP), and dioctyl adipate (DOA)) from environmental water samples. Separation of Fe₃O₄@PTh NPs from the aqueous solution was simply achieved by applying external magnetic field. Separation and determination of the extracted plasticizers was performed by gas chromatography–flame ionization detection (GC–FID). Several variables affecting the extraction efficiency of the analytes i.e., amount of NPs sorbent, salt concentration, extraction time, and desorption conditions were investigated and optimized. The best working conditions were as follows: amount of sorbent, 100 mg; NaCl concentration, 30% (w/v); sample volume, 45 mL; extraction time, 10 min; and 100 μL of ethyl acetate for desorption of the analytes within 2 min. Under optimized conditions, preconcentration factors for DBP, DEHP, and DOA were obtained as 86, 194, and 213, respectively. The calibration curves were linear (R² > 0.998) in the concentration range of 0.4–100 μg L⁻¹ for both DEHP and DOA and 0.7–100 μg L⁻¹ for DBP. The limits of detection (LODs) were obtained in the range of 0.2–0.4 μg L⁻¹. The intra-day relative standard deviations (RSDs%) based on four replicates were obtained in the range of 4.0–12.3%. The proposed procedure was applied to analysis of water samples including river water, bottled mineral water, and boiling water exposed to polyethylene container (after cooling) and recoveries between 85 and 99% and RSDs lower than 12.8% were obtained.     

Ring opening of epoxides with alcohols using Fe(Cp)2BF4 as catalyst

Fe(Cp)₂BF₄ is an efficient catalyst for the alcoholysis of aromatic, aliphatic, and cyclic epoxides giving excellent yields of the corresponding β-alkoxy alcohols under ambient conditions. The methanolysis of styrene oxide using Fe(Cp)₂BF₄ as a catalyst (5 mol %) gave excellent yield of 2-methoxy-2-phenylethanol with complete regio-selectivity. The ring opening of cyclic epoxides gave 77–97% yields of trans-β-methoxy alcohols, in 0.5–6 h. The use of 1,2-epoxyhexane and 1,2-epoxydodecane as substrates gave both regioisomers in excellent yields. The first order rate of reaction with respect to catalyst was observed for the kinetics of ring opening of 1,2-epoxyhexane with methanol.     

A mild method for the deprotection of tetrahydropyranyl (THP) ethers catalyzed by iron(III) tosylate

A mild method for the deprotection of THP ethers catalyzed by iron(III) tosylate (2.0 mol %) in CH₃OH has been developed. Iron(III) tosylate, Fe(OTs)₃·6H₂O, is a commercially available solid that is inexpensive, noncorrosive, and easy to handle. The room temperature reaction conditions make this method attractive for deprotection of a range of THP ethers.     

Dispersive micro-solid-phase extraction of benzodiazepines from biological fluids based on polyaniline/magnetic nanoparticles composite

In this study, diverse types of Fe₃O₄ nanocomposites modified by polyaniline, polypyrrole, and aniline–pyrrole copolymer were synthesized through chemical oxidative polymerization process for dispersive-μ-solid phase extraction (D-μ-SPE) in the presence of various dopants. The results showed that the nanocomposite modified by polyaniline with p-toluene sulfonic acid as a dopant demonstrated higher extraction efficiency for lorazepam (LRZ) and nitrazepam (NRZ). Also the synthesized magnetic sorbents were characterized. The nanocomposite sorbent in combination with high performance liquid chromatography–UV detection was applied for the extraction, preconcentration and determination of lorazepam and nitrazepam in urine and plasma samples. Different parameters influencing the extraction efficiency including: sample pH, amount of sorbent, sorption time, elution solvent and its volume, salt content, and elution time were optimized. The obtained optimal conditions were: sample pH, 6; amount of sorbent, 5 mg; sorption time, 5.0 min; elution solvent and its volume, 0.5 mM cethyltrimethyl ammonium bromide in acetonitrile, 150 μL; elution time, 2.0 min and without addition of NaCl. The calibration curves were linear in the concentration range of 1–2000 μg L⁻¹. The limits of detection (LODs) were achieved in the range of 0.5–1.8 μg L⁻¹ for NRZ and 0.2–2.0 μg L⁻¹ for LRZ, respectively. The percent of extraction recoveries and relative standard deviations (n = 5) were in the range of 84.0–99.0, 6.1–7.8 for NRZ and 90.0–99.0, 4.1–7.0 for LRZ, respectively. Ultimately, the applicability of the method was successfully confirmed by the extraction and determination of NRZ and LRZ in human urine and plasma samples.     

A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.     

N-alkylpyridinium quaternization combined with liquid chromatography–electrospray ionization-tandem mass spectrometry: A highly sensitive method to quantify fatty alcohols in thyroid tissues

A highly sensitive method was developed for the identification and quantification of fatty alcohols in biological tissues. In the presence of pyridine-d₀ and triflic anhydride (Tf₂O), fatty alcohols were converted into permanently charged N-alkylpyridinium ions. Stable isotope-labeled derivatives were generated by pyridine-d₅ and added as internal standard (IS). The mixture was analyzed by liquid chromatography coupled to positive electrospray ionization tandem mass spectrometry (LC–ESI-MS/MS). This method was optimized and validated in terms of reaction time, derivatization efficiency, stability, desalting, and ion suppression effect. Besides, fatty alcohols exhibited good linear relationship (r² > 0.993) over the concentration range of 10 ng mL⁻¹–1 μg mL⁻¹. The limits of detection (LODs) were lowered from previously reported 0.1 ng mL⁻¹ to 0.25 pg mL⁻¹. Precision (RSD% < 15.6%), accuracy (93.0–107.2%), matrix effect, and recovery (in thyroid tissues) were validated as well. Finally, this method was applied for the analysis of ten even carbon-numbered fatty alcohols (C₈–C₂₄) in human thyroid carcinoma and para-carcinoma tissues, revealing a significant decrease of fatty alcohols (free and esterified) in thyroid carcinoma tissues (p < 0.05).     

Photoinduced interactions between colloidal TiO2 nanoparticles and calf thymus-DNA

The interaction of colloidal TiO₂ nanoparticles with calf thymus-DNA was studied by using absorption, FT-IR, steady state and time resolved fluorescence spectroscopic techniques. The apparent association constant has been deduced (K_app = 2.85 × 10³ M⁻¹) from the absorption spectral changes of the DNA-colloidal TiO₂ nanoparticles using the Benesi–Hildebrand equation. Addition of colloidal TiO₂ nanoparticles quenched the fluorescence of EtBr–DNA. The number of binding sites (n = 0.97) and the apparent binding constant (K = 6.68 × 10³ M⁻¹) were calculated from relevant fluorescence quenching data. The quenching, through a static mechanism, was confirmed by time resolved fluorescence spectroscopy.