The role of polymer/drug interactions on the sustained release from poly(dl-lactic acid) tablets

The release profiles of model drugs (propranolol HCl, diclofenac sodium, salicylic acid and sulfasalazine) from low molecular weight poly(d,l-lactic acid) [d,l-PLA] tablets immersed in buffer solutions were investigated in an attempt to explore the mechanism of the related phenomena. It was confirmed that drug release is controlled by diffusion through the polymer matrix and by the erosion of the polymer. The pH of the surrounding medium influences the drug solubility as well as swelling and degradation rate of the polymer and therefore the overall drug release process. Physicochemical interaction between d,l-PLA and drug is an additional factor which influences the degree of matrix swelling and therefore its porosity and diffusion release process. Propranolol HCl shows extended delivery time at both examined pH values (5.4 and 7.4) and especially at pH 7.4 where release was accomplished in 190 days, most probably due to its decreased solubility at higher pH values. The acidic drugs gave shorter delivery times especially at pH 7.4. A slower drug release rate and more extended delivery time at pH 7.4 in comparison with that at pH 5.4 was recorded for tablets loaded with diclofenac sodium and salicylic acid. The opposite effect was observed with samples loaded with propranolol HCl.     

Formulation characterization and in vitro evaluation of acacia gum–calcium alginate beads for oral drug delivery systems

In the present work, new matrix bead formulations based on linear and branched polysaccharides have been developed using an ionic gelation technique, and their potential use as oral drug carriers has been evaluated. Using calcium chloride as a cross‐linking agent and sodium diclofenac (SD), as a model drug, acacia gum–calcium alginate matrix beads were formulated. The response surface methodology based on 3² factorial design was used as a statistical method to evaluate and optimize the effects of the biopolymers‐blend ratio and the concentration of calcium chloride on the particle size (mm), density (g/cm³), drug encapsulation efficiency (%), and the cumulative drug release after 8 hours (R_8h,%). The optimized beads with the highest drug encapsulation efficiency were examined for a drug‐excipients compatibility by powder X‐ray diffraction, differential scanning calorimetry, thermo‐gravimetric analysis, and Fourier transform‐infrared spectroscopy analyses. The swelling and degradation of the matrix beads were found to be influenced by the pH of medium. Higher degrees of swelling were observed in intestinal pH than in stomach pH. Accordingly, the drug release study showed that the amount of SD released from the acacia gum–calcium alginate beads was higher in intestinal pH than in stomach pH. Therefore, the in vitro drug release from the SD‐loaded beads appears to follow the controlled‐release (Hixson‐Crowell) pattern involving a case‐2 transport mechanism operated by swelling and relaxation of the polymeric blend matrix.     

A controlled porosity osmotic pump system with biphasic release of theophylline

A controlled porosity osmotic pump system with biphasic release of theophylline was developed for the nocturnal therapy of asthma. The developed system was composed of a tablet-in-tablet (TNT) core and a controlled porosity coating membrane. Release pattern of the developed system was influenced by amount of pore former (18.2-45.5%, w/w of polymer), weight gain (16-26 mg per tablet) of the coating membrane and osmotic agents used in inner layer of the TNT core. When sodium phosphate and sodium chloride were selected as the osmotic agents in inner and outer layer of the TNT core respectively, target release profile was obtained with coating solution cellulose acetate-polyethylene glycol 400-diethyl phthalate (54.5-36.4-9.1%, w/w) at a weight gain of 16-22 mg per tablet. To examine the mechanism of drug release, release profiles of osmotic agents, micro-environmental osmotic pressure and micro-environmental pH of the formulation during dissolution were studied. Micro-environmental osmotic pressure decreased and micro-environmental pH increased continuously during the whole dissolution process, theophylline release was dominated by the successive dissolution of sodium chloride and sodium phosphate. Theophylline solubility increased as environmental pH exceeded 10.8. At the last stage of the biphasic release, micro-environmental pH in the developed formulation reached 10.9, and theophylline release was promoted by its elevated solubility despite of the decrease of micro-environmental osmotic pressure in the developed formulaiton.     

麦饭石含量对载药复合凝胶小球释药性能的影响

以瓜尔胶-g-聚丙烯酸/麦饭石复合水凝胶(GG-g-PAA/MS)和海藻酸钠(SA)为原料,双氯芬酸钠(DS)为模拟药物,采用离子凝胶法制备了载药复合凝胶小球,考察了pH敏感性以及MS含量对复合凝胶小球的包封率、载药率、溶胀性和药物释放行为的影响.结果表明:凝胶小球具有明显的pH敏感性,在不同pH介质中溶胀率和释放速率...     

Effect of hydroxypropylmethyl cellulose on the complexation of diclofenac with cyclodextrins

The effect of a hydrophilic polymer, hydroxypropylmethyl cellulose K4M, on the complexation of diclofenac sodium with b- and hydroxypropyl-b-cyclodextrins has been studied. Multicomponent systems were prepared with the drug, both cyclodextrin and the polymer. Phase solubility diagrams revealed the positive effect of the polymer on the complexation of the drug but this effect was found after autoclaving the solutions. Solid inclusion complexes were prepared by freeze-drying and characterized by thermal analysis (DSC) and X-ray diffractometry. In solid state, binary inclusion complexes enhance the dissolution behaviour of diclofenac but, from the b-cyclodextrin multicomponent complex, the polymer controls the release of the drug. In the case of hydroxy- propyl-b-cyclodextrin multicomponent system, the solubility of the drugs increases significantly compared with the binary complex. This revised version was published online in July 2006 with corrections to the Cover Date.     

Image analysis studies of dimensional changes in swellable hydrophilic polymer matrices

Studies of the fronts which are created by the process of swelling, their movement and the effect of drug solubility on release mechanisms, are presented. Tablets comprising solely of hydroxypropyl methylcellulose (HPMC) (Metolose 90 SH 100 000 SR), HPMC with sodium diclofenac (relatively soluble in the buffer solution used) and HPMC with furosemide (insoluble in the buffer solution used) were prepared. The tablets were made by direct compression in a manual hydraulic press and the matrix swelling was studied by an optical analysis technique. During the experimental procedure measurements were taken of the gel layer dimensions, the movement of the swelling, and the erosion and diffusion fronts at different time points. These measurements allowed the investigation of the possible mechanisms involved in the swelling/release process. The results showed that the rate and mechanism of drug release from swellable matrices depends on the following factors: the dissolution, the diffusion of the drug, the translocation of undissolved drug particles in the gel layer, and the solubility of the drugs used. This is supported by the following: (a) the diffusion layer thickness, which is observed as a result of the presence of undissolved drug in the gel layer, increases in the case of the water insoluble drug furosemide and as a result the diffusion front converges on the erosion front; (b) from the analysis of the dissolution data it appears that sodium diclofenac is released as a result of diffusion via the gel layer as well as due to polymer relaxation and/or matrix erosion. Conversely, the release of furosemide is only dependent on the polymer relaxation and/or matrix erosion. Copyright © 2004 John Wiley & Sons, Ltd.     

Solubility and solubility constant of barium sulfate in aqueous sodium sulfate solutions between 0 and 80°C

The solubilities of barium sulfate in aqueous solutions of sodium sulfate were studied at ionic strengths from 0.0005 to 0.02 mol-kg^–1 and at 0, 20, 40, 60, and 80°C. The solubility data were used to calculate the solubility constants using an extrapolation method. The solubility constant obtained were in good agreement with literature data. The mean activity coefficients of barium sulfate in aqueous solutions of sodium sulfate were also studied.     

Abnormal dissolutions of chlorpromazine hydrochloride tablets in water by paddle method under a high agitation condition

All sugar-coated tablets of chlorpromazine hydrochloride except for those produced by one manufacture showed concave dissolution profiles in water by paddle method at 100 rpm but not at 50 rpm. The study was undertaken to clarify the agitation-dependent abnormal dissolutions. The strange dissolutions were also observed in water at different ionic strengths but not in buffer solutions of pH 1.2, 4.0 and 6.8. When monitored, the pH's of water in dissolution vessels for the abnormal tablets increased with time at 100 rpm and some of them exceeded pH 8 but did not at 50 rpm. The solubility of chlorpromazine hydrochloride decreased with the increase of pH which was too low to dissolve the whole amount of drug contained in a tablet at pH 8. The elevation of pH seemed to be mainly brought about by dissolution of calcium carbonate popularly used for sugar-coated tablets, because larger amount of calcium ion was dissolved out from the abnormal tablets at 100 rpm than from a normal tablet and from them at 50 rpm. These findings indicate that the concave dissolution profiles should be caused by the decrease of drug solubility with increase in pH of water, probably because of dissolution of calcium carbonate. We should pay attention to the change in pH of water which may differ depending on the agitation speed of dissolution tests.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

In vitro transport of sodium diclofenac across rat abdominal skin: effect of selection of oleaginous component and the addition of alcohols to the vehicle

The in vitro percutaneous transport of sodium diclofenac from various oil vehicles was examined using rat abdominal skin as a model skin membrane. The overall transport of diclofenac through the skin from the oleaginous vehicles was very poor because of a poor solubility of sodium diclofenac in nonpolar oils. To increase the solubility and the permeability of sodium diclofenac, ethanol and n-octanol were added to each oil (designated as the formulated vehicles). The addition of ethanol and n-octanol to the nonpolar vehicles resulted in an extreme increase in drug solubility in each vehicle, with a remarkable increase in the permeation of diclofenac. The effects of oil components in the formulated vehicle on the permeation of diclofenac across the skin were in the following order: squalane greater than or equal to squalene greater than liquid paraffin greater than middle chain triglyceride greater than olive oil greater than castor oil. In order to clarify the reason for the differences in permeation of diclofenac from these formulated vehicles, the release of diclofenac and n-octanol from these vehicles in vitro was studied. The release rates of n-octanol from the formulated vehicles were in the following order: liquid paraffin greater than squalene greater than or equal to squalane greater than middle chain triglyceride greater than or equal to olive oil greater than castor oil. On the other hand, a linear correlation was observed between the initial release rate of diclofenac from the formulated vehicle and the in vitro permeation of diclofenac through the vehicle to the skin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Performance of the diffusive gradients in thin films technique for measurement of trace metals in low ionic strength freshwaters

A series of experiments were undertaken to investigate the effect of ionic strength and the concentration of free sodium ions in the resin gel on the performance of the diffusive gradients in thin films (DGT) technique. When the free sodium ion concentration in the resin gel was estimated by the time-dependent release into solution, it agreed with a previous estimate. However, equilibration with different volumes of water gave a higher value, suggesting that inherent averaging in the time-dependent release method underestimates the free concentration. DGT measurements of Cu and Cd were made over a wide range of ionic strengths (from 3 μmol l⁻¹ to 0.8 mol l⁻¹). For all the ionic strengths above 100 μmol l⁻¹ there was no significant difference between measurements made by DGT and measurements made directly on the solution using atomic absorption spectroscopy. Below 100 μmol l⁻¹ results were erratic. They did not comply with a theory that predicts high results for DGT based on enhancement of the diffusion coefficient of trace metal cations by counter diffusion of sodium ions. When Cd in solutions with a range of ionic strengths was measured by DGT there was no difference whether the resin gels were in Na or Ca form. Rather than counter diffusion of Na ions, it is suggested that the spurious behaviour at low ionic strength is due to interactions of the trace metals with the diffusion gel when there are insufficient excess cations present.     

Effect of formulation variables on entrapment efficiency and release characteristics of bovine serum albumin from carboxymethyl xanthan microparticles

Xanthan gum was derivatized to sodium carboxymethyl xanthan (SCMX) gum with a view to prepare bovine serum albumin (BSA)‐loaded carboxymethyl xanthan (CMX) microparticles through interaction with metal ion in a completely aqueous environment. The effect of various formulation variables, such as a pH of SCMX gum solution, concentration of BSA and SCMX gum, and gelation time on BSA entrapment efficiency and release of the protein in different media were studied. While BSA entrapment efficiency was found to decrease with increase in gelation time and initial BSA loading, the same was found to increase with increase in concentration of SCMX gum. Although the release of BSA in acidic medium was almost equal to that in alkaline medium, as compared up to 2 hr, the release in alkaline medium was found to be prolonged to a different extent depending upon the formulation variables. Copyright © 2008 John Wiley & Sons, Ltd.     

pH and ionic sensitive chitosan/carboxymethyl chitosan IPN complex films for the controlled release of coenzyme A

pH and ionic sensitive interpenetrating polymer network (IPN) complex films based on chitosan (CS) and carboxymethyl chitosan (CM-CS) were prepared by using glutaraldehyde as crosslinking agent. Its structure was characterized by FT-IR, which indicated that the IPN was formed. The films were studied by swelling, weight loss with time, and release of coenzyme A (CoA). It was found that the IPN films were sensitive to pH and ionic strength of the medium. The cumulative release rate of CoA decreased with CoA loading content, ionic strength or crosslinking agent increasing. The composition of the IPN films and pH of release medium also had significant effect on the release of CoA. The differences in the rates and amounts of released CoA may be attributed to the swelling behavior, the degradation of films, and interaction between drug molecule and polymer matrix. These results suggested CS/CM-CS IPN films could be used as drug delivery carrier.     

In vitro release of metoclopramide from hydrophobic matrix tablets. influence of hydrodynamic conditions on kinetic release parameters

There has been growing interest in the subject of drug delivery and the design and evaluation of controlled-release systems. The simplest way to control the release of an active agent is to disperse it in an inert polymeric matrix. Controlled-release systems are of interest because they are technologically simple, relatively cheap, and practically unaffected by physiological changes. In this study, a new matrix system was formed by an active principle, metoclopramide hydrochloride, scattered into a biocompatible hydrophobic polymerical mesh, polyamide 12, to achieve sustained and controlled delivery of metoclopramide hydrochloride. This research was conducted to investigate the in vitro drug release behavior from these new inert polymeric matrix tablets. The drug release process was investigated both experimentally and by means of mathematical models. Different models were applied for the evaluation of drug release data. On the basis of our results, a biexponential equation was proposed, Q=Qfast(1)(1 - e(-Kfast t)) + Qslow(2)(1 - e(-Kslow t)), in an attempt to explain the mechanism responsible for the release process. Additionally, the influence of the experimental conditions of the dissolution devices, such as rate of flow and pH of dissolution medium, on the parameters that characterize the release mechanism was studied, and it was found that the main factor was the hydrodynamic condition of rate of flow.     

Immobilization of camptothecin with surfactant into hydrogel for controlled drug release

A new strategy has been developed for the controlled release of a hydrophobic anticancer drug, camptothecin (CPT), which suffers a limited therapeutical utility because of its poor water solubility. CPT was first solubilized in the solution of a cationic surfactant, dodecyltrimethylammonium bromide (DTAB). It has been demonstrated that the presence of DTAB has increased the solubility of CPT significantly. In a 50 mM DTAB solution, the drug’s solubility was enhanced to 85 μM, 22 times of its solubility in pure water. The micellar drug solution of CPT-DTAB was subsequently used to prepare agarose hydrogels, which act as the drug carriers in the release studies. To fully take advantage of the cationic property of DTAB, negatively charged κ-carrageenan was added as a guest polymer in some hydrogel samples. The release of CPT from these hydrogel-surfactant systems was performed at 37 °C and the effects of DTAB and κ-carrageenan on the release of CPT were studied respectively. By fitting to the well-known Fickian diffusion model, the diffusion coefficients of CPT were obtained.     

Comparison of micro- and mesoporous inorganic materials in the uptake and release of the drug model fluorescein and its analogues

The uptake of the three species of the drug model fluorescein (fluorescein sodium salt (FNa), fluorescein free acid (F), and fluorescein diacetate (FDA)) by zeolite NaX and the mesoporous zeotype MCM-41 was investigated as well as their release rates into solutions at pH 7 and pH 4.5. UV/Vis analysis was carried out at a wavelength of 490 nm. Uptakes of the sodium salt of 9 % for zeolite X and 14 % for MCM suggest little penetration of the pores. The use of ethanol as the loading solvent for F resulted in little uptake for both zeolitic materials due to the successful competition of the ethanol for binding sites. Use of acetone (weaker proton acceptor) as loading solvent significantly improved the uptake of F to 17 % and 12 % for zeolite X and MCM, respectively, whilst the uptake of FDA in acetone increased still further to 22 % and 17 % for zeolite X and MCM, respectively. Generally there was a large initial release of the fluorescein analogues from the surface of the zeolites with very little further increase over time. The prescence of an esterase enzyme in the release medium of FDA tripled the release from MCM to 15 % but left the release from zeolite X unaffected at 6 %. The results obtained show that uptake of fluorescein and its analogues is dependent on the loading solvent used, the amount released is influenced by not only the solvent but the pH and the presence of enzymes in the release medium.     

Enthalpies of dissolution of NaVO3 · 2H2O in aqueous chloric acid and the standard formation enthalpy of the VO 2 + ion

The enthalpies of dissolution of sodium metavanadate dihydrate in aqueous solutions of chloric acid and sodium perchlorate were measured by calorimetry at 298.15 K at ionic strengths of I = 0.3, 0.4, 0.5, 0.6, and 1.0 M. The standard formation enthalpy of the VO ₂ ⁺ ion in aqueous solution was calculated from the resulting experimental data.     

In Vitro Release of Local Anaesthetic and Anti-Inflammatory Drugs from Crosslinked Collagen Based Device

The drug delivery systems that are the object of this article take the form of a hydrophilic matrix (collagen or crosslinked collagen) containing a drug. These devices can be used as The model active agents, were chosen from the range of local anaesthetics (lidocaine hydrochloride), anti-inflammatory (diclofenac sodium salt) and antioxydant (caffeic acid). Whatever the drug affinity for water, in the first time of the experiments, the release appears to be systematically delayed when the matrix is crosslinked. For lidocaine hydrochloride based systems, as the amount of drug increases in the matrix, the high gap concentration between the matrix and the buffer solution promote the diffusion and a Fickian behavior is observed on the release curves. Depending on the chemical nature of the drug and its solubility, several interactions between the drug and the collagen matrix can be considered. A new drug delivery system containing caffeic acid as the anti-inflammatory and antioxydant molecule could be tested. This new system was able to release 95% of the drug in 5 h and the global release rate depends on the initial drug concentration in the device.     

Formulation and Optimization of Alkaline Extracted Ispaghula Husk Microscopic Reservoirs of Isoniazid by Box-Behnken Statistical Design

The main objective of the present work was to formulate and optimize a microparticulate sustained release drug delivery system of isoniazid by using a novel, alkaline extracted ispaghula husk as a polymer. Isoniazid microspheres of alkaline extracted ispaghula husk were prepared by emulsification internal ionic gelation method. Results of preliminary trials indicated that the polymer concentration, cross-linking agent and stirring speed had a noticeable effect on size and surface morphology. A four-factor three-level Box-Behnken design was employed to study the effect of independent variables on dependent variables. The particle size and entrapment efficiency varied from 30.75 to 61.78 µm and 62.27% to 85.80% respectively, depending on the polymer concentration, concentration of cross-linker and stirring speed. Optimized microspheres batch based on point prediction tool of design software exhibited 83.43% drug entrapment and 51.53 µm particle size with 97.80% and 96.37% validity, respectively at the following conditions: sodium alginate (3.55% w/v), alkaline extracted ispaghula husk (3.60% w/v), cross-linker concentration (7.82% w/v), and stirring speed (1200 rpm). The optimized formulation showed controlled drug release for more than 12 hours. The drug release followed Higuchi kinetics via a non-Fickian diffusion.     

Solubilty and dissolution studies of antifungal drug:hydroxybutenyl-β-cyclodextrin complexes

The solubilities of voriconazole, ketoconazole, and clotrimazole with and without hydroxybutenyl-β-cyclodextrin (HBenBCD) in aqueous media were examined. The solubility of these antifungal drugs was significantly improved by complexation with HBenBCD. Both the pH and the type of buffer used to adjust the medium pH had a very significant effect on drug solubilities and the apparent binding constants of the drug:cyclodextrin complexes. Additionally, the stereochemistry of tartrate buffers was found to influence both the electrostatic interaction between drug and tartrate as well as complexation of the drug-tartrate aggregate by HBenBCD. We also compared the solubilization of these antifungal drugs by HBenBCD to other cyclodextrin derivatives with different substituents under identical experimental conditions and found that the amount of drug solubilized was in some cases influenced strongly by the nature of the cyclodextrin. Solid antifungal drug:HBenBCD complexes were prepared and their dissolution profiles were obtained which showed that HBenBCD improved both the rate of dissolution and the amount of drug dissolved.