Evaluation of an aqueous KOH digestion followed by hexane extraction for analysis of PCDD/Fs and dioxin-like PCBs in retailed fish

Aqueous KOH digestion followed by hexane extraction has been employed in the extraction of dioxins (polychlorinated dibenzo- p -dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls) for biological samples, but there are no reports on its evaluation. Therefore, we report here the evaluation of this extraction for the analysis of dioxins in retailed fish. The effect of the alkaline digestion on dioxins was evaluated by estimation of recoveries. The recoveries of dioxins after the alkaline digestion were good (79-106%) in various kinds of retailed fish except tuna. In tuna, loss of octachlorodibenzofuran (OCDF) was clearly observed, however, the loss was corrected by internal-standard quantification; (13)C12-labeled OCDF was added before the alkaline digestion. Comparative study showed that alkaline digestion followed by hexane extraction provides extraction efficiencies of dioxins equal to those of conventional Soxhlet extraction in fish. Additionally, in analysis of a certified reference fish sample with this extraction, the values obtained for certified isomers were almost equal to the certified values. Since the present method is very simple and inexpensive, it would be useful for analysis of dioxins in retailed fish.     

Optimization of solid-phase extraction procedure for determination of polychlorinated dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins,polychlorinated dibenzofurans,and coplanar polychlorinated biphenyls in humic acid containing water

A solid-phase extraction (SPE) method was optimized for accurate determination of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (CoPCBs) in humic acid containing surface water. Recovery experiments using humic materials revealed that humic acids permit dioxins to pass through an octadecylsilica (C₁₈) extraction disk by associating with them under weakly alkaline conditions. Acidification of the sample before percolation improved this otherwise insufficient recovery. The analysis of surface water acidified to pH 2 gave better recovery with surrogate standards and lower quantitative values for higher-chlorinated homologues than the sample at pH 9. In all samples, the native octachlorodibenzo-p-dioxin (OCDD) peak abundance showed no difference between at pH 2 and at pH 9, indicating overestimation of the quantitative value of the homologue at pH 9. Acidification of a humic acid containing water sample can avoid overestimation of higher-chlorinated congeners caused by insufficient recovery of their corresponding surrogates.     

Development of new cleanup method of polychlorinated dibenzo-p-dioxins/dibenzofurans in fish by freezing-lipid filtration

Freezing-lipid filtration as a new method has been developed for the rapid determination of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/Fs) in biological samples. This method can effectively reduce the time of sample pretreatment, labor and amount of solvents compared with conventional methods. By freezing-lipid filtration procedure, about 90% of lipids in extract could be removed without any significant loss of PCDD/Fs. For further cleanup of extracts after freezing-lipid filtration, automatic parallel LC columns including silica gel, alumina and carbon columns were applied. During automatic parallel LC columns cleanup, most of co-extracted interferences such as residue lipids and fatty acids could be eliminated and dioxins could be separated from many other dioxin-like congeners such as polychlorinated biphenyls by this procedure. The extracts after cleanup were analyzed by high-resolution gas chromatography (HRGC)/high-resolution mass spectrometry (HRMS) using an isotope dilution method. The average recoveries and relative standard deviation (R.S.D.) of 17 native congeners in the spiked fish samples at 8-80 pg/g (n = 3) were ranged between 85.3 and 117.2% and 5.7-20.3%, respectively.     

Loss of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls during nitrogen gas blowdown process for ultra-trace analysis

This study examined standard solutions to assess the influence of the gas flow rate and organic solvent type on losses caused by gas blowdown of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/DFs) and coplanar polychlorinated biphenyls (Co-PCBs). Results obtained here will contribute to maintaining analytical method performance and system quality for PCDD/DFs and Co-PCBs analyses. An organic solvent (with 0.5 ml each of acetone, dichloromethane, n-hexane, and toluene), PCDD/DFs or Co-PCBs, and their ¹³C₁₂-labeled compounds were put separately into 10 ml pear-shaped flasks. The samples were blown to dryness at room temperature until the last trace of solvent disappeared. They were subsequently reconstituted in those flasks. Analyte recoveries were calculated by comparing blown samples to those that had not been blown. Recoveries of Co-PCBs were more affected than those of PCDD/DFs when the gas flow rates were set at 203, 261, 332, and 456 ml/min. Losses of Co-PCBs were least at 203-332 ml/min. Regarding losses of PCDD/DFs and Co-PCBs, the toluene solution showed the least variation in recovery. An actual soil sample extract was also examined using optimized conditions for the gas flow rate and solvent types obtained by experiments in standard solutions. Thereby, the blowdown conditions gave quantitative recoveries of ¹³C₁₂-labeled compounds in the sample extract.     

Evaluation of magnetic matrix solid‐phase dispersion for the determination of polychlorinated biphenyls in water samples by gas chromatography with electron capture detection

A vortex‐assisted magnetic matrix solid‐phase dispersion method was proposed for the determination of polychlorinated biphenyls in different matrix water samples by gas chromatography with electron capture detection. Magnetic bamboo charcoal (MBC) was synthesized for the adsorption of polychlorinated biphenyls in water samples. Complete separation of the liquid phase and the solid magnetic bamboo charcoal was easily achieved by using a permanent magnet. Under the optimized conditions, good linearity in the range of 0.006–5.0 μg/L was obtained with regression coefficients (r) higher than 0.9986. Based on a signal‐to‐noise ratio of 3, limits of detection were found to be 0.001–0.003 μg/L. Relative standard deviations ranged from 2.92 to 6.56%. Relative recoveries were 96.6–111.2% for the spiked wastewater sample and 90.7–104.7% for the spiked lake water sample. All results showed that the proposed method was simple, sensitive, and reliable for the determination of polychlorinated biphenyls in water samples.     

Advances in analytical techniques for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like PCBs

Analytical techniques for the determination of polychorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and dioxin-like PCBs (DLPCB) are reviewed. The focus of the review is on recent advances in methodology and analytical procedures. The paper also reviews toxicology, the development of toxic equivalent factors (TEF) and the determination of toxic equivalent quantity (TEQ) values. Sources, occurrence and temporal trends of PCDD/PCDF are summarized to provide examples of levels and concentration ranges for the methods and techniques reviewed.     

Fast clean-up for polychlorinated dibenzo-p-dioxins, dibenzofurans and coplanar polychlorinated biphenyls analysis of high-fat-content biological samples

A fast clean-up procedure for the low level analysis of polychlorinated dibenzo-p-dioxins. polychlorinated dibenzofurans and coplanar polychlorinated biphenyls in highly fatty biological matrices using high capacity disposable multi-layer silica columns is presented. Results were compared with gel permeation chromatography for removal of lipids. Analytical criteria such as recovery rates, repeatability, reproducibility and robustness are evaluated through a broad range of biological matrices and reference materials analysis. The final proposed procedure for the complete analysis, including pressurized liquid extraction, Power-Prep system clean-up and GC-high-resolution MS analysis requires only 48 h, and allows the simultaneous preparation of up to 10 samples.     

Solid-phase microextraction of polychlorinated biphenyls

The extraction and analysis of 21 polychlorinated biphenyls (PCBs) ranging from di- to decachlorobiphenyls in ocean, wetland and leachate water samples were achieved using solid-phase microextraction (SPME) with a 100-μm poly(dimethylsiloxane) (PDMS) fiber and gas chromatography–electron-capture detection (GC–ECD). Severe carryover between samples (e.g., 20%) occurs on both stir bars and the SPME fibers demonstrating that it is important to use a new stir bar for each sample, as well as to perform SPME–GC blanks between samples to avoid quantitative errors. The equilibrium partitioning coefficients of individual PCB congeners between PDMS and water were found to be surprisingly different compared to their octanol–water partitioning coefficient (K_ow), demonstrating that K_ow cannot be used to estimate the partitioning behavior of PCBs in the SPME process. Using a 15-min SPME extraction, SPME analysis with GC–ECD was linear (r²≥0.97) from 5 pg/ml to the solubility limit of each congener. Concentrations in water samples obtained by 15-min SPME extractions compared favorably with those obtained by toluene extractions, demonstrating that SPME combined with GC is a useful technique for the rapid determination of PCBs in water samples.     

Fast and efficient extraction methods for the analysis of polychlorinated biphenyls and polybrominated diphenyl ethers in biological matrices

This paper describes fast and simple extraction methods for the determination of polychlorinated biphenyls and polybrominated diphenyl ethers in biological matrices. Four extraction protocols were tested. The first protocol used microwave-assisted extraction combined with two purification steps. The second one was similar, except that microwave-assisted extraction was replaced by accelerated solvent extraction. The third one combined extraction/purification by accelerated solvent extraction with final purification on a silica gel column. The last one combined microwave-assisted extraction with purification on an acidic silica gel column. The protocols were tested on various matrices: a spiked matrix, two certified matrices (SRM 2977, WMF 01), and natural matrices (mysids and fish). All of the protocols produced good performance in terms of recovery and reproducibility. The two last protocols showed promising results in terms of applicability to natural matrices, as they required a minimum of sample handling and minimal amounts of solvent and time. These methods allowed at least 24 samples to be handled per day, and could easily be used for routine analysis. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Establishing an alternative method for the quantitative analysis of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans by comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry for developing countries

Comprehensive Gas Chromatography-Time-of-Flight Mass Spectrometry (GC×GC-TOFMS) methodology has been refined for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in samples with different matrices. This is specifically for application in developing countries where access to gas chromatography-high resolution mass spectrometry (GC-HRMS) and highly skilled personnel is limited. The method, using an Rxi-5 Sil MS column in the first dimension ((1)D) coupled with an Rtx-200 column in the second dimension ((2)D), was used to quantify PCDDs and PCDFs in different environmental sample matrices. The results were compared with those obtained using GC-HRMS and good agreement was observed. The limit of detection (LOD) for the method (300fg on column for spiked soil samples) was determined using an Rxi-XLB ((1)D) column coupled with an Rtx-200 column ((2)D). Preliminary South African sample results are also discussed. Isomer specificity for different tetrachloro dibenzo-p-dioxins (TCDDs) and tetrachloro dibenzofurans (TCDFs) was investigated using a commercial standard. Adequate resolution was achieved. The method as described has great attraction for developing countries being both financially and operationally favourable.     

Determination of polychlorinated dibenzo‐p‐dioxins and polychlorinated dibenzofurans,and dioxin‐like polychlorinated biphenyls in human serum using programmable‐temperature vaporization gas chromatography with high‐resolution mass spectrometry

The determination of polychlorinated dibenzo‐p‐dioxins and polychlorinated dibenzofurans, and dioxin‐like polychlorinated biphenyls in blood from a non‐occupational population is essential for the investigation of adverse health effects from these pollutants. In this study, a sensitive method based on programmable‐temperature vaporization with large‐volume injection coupled with gas chromatography with high‐resolution mass spectrometry was developed to determine these pollutants in 1–2 mL of human serum samples. Various key parameters of programmable‐temperature vaporization injector, including vent temperature, vent time, vent flow, transfer temperature and transfer time were optimized by factorial design. The accuracy and precision as well as applicability were assessed by determining polychlorinated dibenzo‐p‐dioxins, polychlorinated dibenzofurans, and dioxin‐like polychlorinated biphenyls in calibration standard solutions, standard reference materials and real human serum samples from non‐occupational population. The method detection limits of polychlorinated dibenzo‐p‐dioxins and polychlorinated dibenzofurans, and dioxin‐like polychlorinated biphenyls were 1.5–9.0 and 0.005–0.02 ng/kg wet weight, respectively. By comparing with typically splitless injection, the application of programmable‐temperature vaporization injector could effectively lead to higher detectable rate of polychlorinated dibenzo‐p‐dioxins and polychlorinated dibenzofurans, and dioxin‐like polychlorinated biphenyls in 1–2 mL of human serum samples.     

Comparison of immunoaffinity column recovery patterns of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans on columns generated with different monoclonal antibody clones and polyclonal antibodies

Evaluation of immunoaffinity columns (IACs) for dioxin serum sample clean-up requires a determination of the recovery of various dioxin congeners. We compared the IAC performance of different monoclonal and polyclonal anti-dioxin antibodies, measuring the recovery of congeners of polychlorinated dibenzo-p-dioxins (PCDDs). In addition, we measured the recovery of congeners of the structurally related polychlorinated dibenzofurans (PCDFs).The polyclonal antibody based IACs evaluated had lower recovery for highly chlorinated dioxin congeners, but were more specific toward 2,3,7,8-TCDD. The resemblance of the hapten to 2,3,7,8-TCDD appeared to play a clear role, but chlorines in the 2-, 3- and 7-positions of the hapten were essential. Recovery of 2,3,7,8-TCDD from the IAC showed some relation to the affinity for the antibody measured by either the K_a from accelerator mass spectrometry (AMS) or with 50% inhibition of color activity (IC₅₀) determined from an ELISA analysis.The IACs prepared from four monoclonal antibodies (Mabs) derived from a common hapten showed differences in their retention patterns of PCDDs/PCDFs. Comparison of IC₅₀ from ELISA with recovery from the IACs indicated that a minimum IC₅₀ of 100 ppb was required for satisfactory recovery from the IAC, but the correlation was poor, indicating other factors were involved. Mab DD3 showed the broadest spectrum of the Mabs and showed satisfactory recoveries of all of the dioxin congeners, except OCDD. In addition, DD3 showed good recovery toward 2,3,4,8-TCDF, 2,3,4,7,8-PeCDF and 2,3,4,6,7,8-HxCDF but has poor recovery when PCDFs have a chlorine substitution in the 1-position.     

Validation of methods for measuring polychlorinated dibenzo- p -dioxins and furans,and dioxin-like polychlorinated biphenyls in flue gas

Method validation was performed on the collection and extraction procedures for an analysis of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DLPCBs) in flue gas. The adoption of the rapid pressurized liquid extraction (PLE) technique was evaluated for extraction from polyurethane foam plugs (PUFPs) and fly ash. With respect to extraction from PUFPs, dichloromethane PLE showed an extraction efficiency equivalent to that of conventional acetone Soxhlet, while toluene PLE was found to have a lower extraction efficiency from fly ash than toluene Soxhlet. The collection ability of three sampling methods, employed in the Japanese standard analytical method JIS K0311 (revised in 2005) was evaluated by evaluating the distribution of gaseous PCDD/Fs and DLPCBs in each collection compartment in sampling trains. A DiOANA® fibrous alumina filter and a PUFP, newly employed trapping devices in the revised JIS method, were found to trap gaseous analytes effectively. The validation of the two newly employed sampling methods (DiOANA and PUFP) was tested by parallel measurements of the methods with a conventional five-impinger method, and good agreements on the PCDD/Fs and DLPCBs quantities were demonstrated.     

Micropore-free surface-activated carbon for the analysis of polychlorinated dibenzo-p-dioxins-dibenzofurans and non-ortho-substituted polychlorinated biphenyls in environmental samples

2,3,7,8-Substituted polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and non-ortho-substituted polychlorinated biphenyls (PCBs) account for almost all of the total toxic equivalents (TEQ) in environmental samples. Activated carbon columns are used to fractionate the samples for GC-MS analysis or bioassay. Micropore-free surface-activated carbon is highly selective for PCDD/Fs and non-ortho-PCBs and can improve the conventional activated carbon column clean-up. Along with sulfuric acid-coated diatomaceous earth columns, micropore-free surface-activated carbon provides a rapid, robust, and high-throughput sample preparation method for PCDD/Fs and non-ortho-PCBs analysis.     

Solid Phase Extraction of Polychlorinated Dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins,Dibenzofurans, and Dioxin-like Polychlorinated Biphenyls from Fats

A new method for determination of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls in fats based on the use of Carboxen 1000 and 1016 sorbents has been proposed. The use of Carboxen 1000 obviates the stage of chemical degradation of the fat matrix, thus providing high quality of the extract purification at shorter sample preparation times and a relatively small solvent consumption. The recovery values were slightly lower than in common methods of sample preparation but, nonetheless, conformed to the criteria of Russian and foreign standard methods. The method can be used to analyze animal fats and vegetable oils from food and animal feeds.     

Recoveries of organochlorine compounds (polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans) in water using steam distillation-solvent extraction at normal pressure

A simultaneous steam distillation-solvent extraction (SDE) procedure was used for determining polychrlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCBs, PCDDs and PCDFs) at sub-ppb levels in water samples. Recoveries of 39.8–138.7% and a standard deviation of lower than 10% were achieved for the individual coplanar PCB and the 2,3,7,8-substituted PCDD/F congeners. SDE is a fast, clean, inexpensive and reproducible procedure for the determination of individual PCBs, PCDDs and PCDFs in waters at very low concentrations.     

Separation of polychlorinated dibenzothiophenes from polychlorinated dibenzodioxins and -furans

Polychlorinated dibenzothiophenes (PCDT) have recently been identified in a series of environmental samples. Since their masses are very close to those of the polychlorinated dibenzodioxins (PCDD), low resolution mass selective detection cannot be used to distinguish between these two classes of compounds. A method is presented which may allow this, involving the oxidation of the PCDTs to the corresponding sulfones which have a higher mass than the PCDDs. If needed, the PCDTO₂s can easily be separated from the PCDDs and the polychlorinated dibenzofurans (PCDFs) by simple chromatographic techniques. The PCDDs/Fs are apparently stable under the oxidative conditions so that now a determination of PCDDs and PCDFs becomes possible without interference from PCDTs.     

Dispersive liquid-liquid microextraction followed by gas chromatography–electron capture detection for determination of polychlorinated biphenyls in fish

A new method of dispersive liquid-liquid microextraction (DLLME) combined with GC-electron capture detection (GC-ECD) was proposed for the extraction and determination of four polychlorinated biphenyls (PCBs) congeners in fish samples. Acetone was used as extraction solvent for the extraction of PCBs from fish samples. The target analytes in the acetone solvent were rapidly transferred to chlorobenzene, which was used as extraction solvent in DLLME procedures. Under the optimum conditions, linearity was obtained in the concentration range from 1.25 to 1250 μg/kg for PCB 52, and 0.25 to 250 μg/kg for PCB 101, 138 and 153. Coefficients of correlation (r²) ranged from 0.9993 to 0.9999. The repeatability was tested by spiking fish samples at 10 μg/kg PCBs, and RSD% (n = 8) varied between 2.2 and 8.4%. The LODs were between 0.12 and 0.35 μg/kg. The enrichment factors of PCBs were from 87 to 123. The relative recoveries of the four PCB congeners for the perch, pomfret and yellow-fin tuna at spiking levels of 10, 20 and 50 μg/kg were in the range of 81.20–100.6%, 85.00–102.7% and 87.80–108.4%, respectively. The results demonstrated that DLLME combined with GC-ECD was a simple, rapid, and efficient technique for the extraction and determination of PCBs in fish samples.     

Self‐made microextraction by packed sorbent device for the cleanup of polychlorinated biphenyls from bovine serum

Microextraction by packed sorbent, a miniaturized form of the solid‐phase extraction, is a new sample pretreatment technology mainly used for bioanalysis. In this work, self‐made device was fabricated by packing C₁₈ sorbent into a microinjection needle (50 μL) and then applied for the analysis of polychlorinated biphenyls in bovine serum followed by gas chromatography with mass spectrometry determination. Compared with conventional solid‐phase extraction, the developed method bears many intriguing properties such as low consumption of the sample and organic solvent, time‐saving and easy operation, which are of great interest and desire for bioanalysis applications. A series of parameters that affect the analytical performance, such as the type of elution, the aspirating/dispensing cycles of sample loading and elution, washing solution, and matrix effects, was investigated in detail. Under the optimized conditions, the proposed method presented a good linearity (R ≥ 0.986) and satisfactory sensitivity and limits of detection (0.06–0.53 ng/mL) and quantification (0.20–1.77 ng/mL), respectively. In addition, satisfactory recoveries (60.0–91.4%) and accuracy (RSD ≤ 5.72%) were achieved after optimizing the conditions when applying the developed method to real sample analysis. The screening of polychlorinated biphenyls residues in bovine serum samples by the developed method demonstrated that the assay is ideally suited as a monitoring method for polychlorinated biphenyls residues in bioanalysis.     

Fractionation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and planar polychlorinated biphenyls by high performance liquid chromatography on a pyrenyl-silica column

Analytical procedures for the determination of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and non-ortho polychlorinated biphenyls (PCB) require a fractionation step to separate PCDD/F from planar PCB and the bulk of PCB. An HPLC method which achieves the separation of the bulk of PCB (0–6 mL of hexane), mono-ortho PCB (6–8 mL of hexane), non-ortho PCB (8–15 mL of hexane) and PCDD/F (15–50 mL of toluene) on a PYE column (2-(1-pyrenyl) ethyldimethylsilylated silica gel) in a single step without the use of backflush as other authors proposed was developed. The method shows a good accuracy and precision and it is linear in the range studied, e.g from 5.8 to 2420 pg injected in HPLC for TCDD/F, from 28.8 to 12100 pg for PeCDD/F, HxCDD/F, HpCDD/F and from 57.6 to 24200 pg for OCDD/F. It has been successfully applied to the analysis of technical mixtures of PCB (Aroclors), a pine wood sample and several water samples of different origins. Received: 29 November 1998 / Revised: 25 February 1999 / Accepted: 3 March 1999