Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via surface‐initiated ATRP and their surface properties: The effects of polymerization conditions

A series of superhydrophobic poly(methacryloxypropyltrimethoxysilane, MPTS‐b‐2,‐2,3,3,4,4,4‐heptafluorobutyl methacrylate, HFBMA)‐grafted silica hybrid nanoparticles (SiO₂/PMPTS‐b‐PHFBMA) were prepared by two‐step surface‐initiated atom transfer radical polymerization (SI‐ATRP). Under the adopted polymerization conditions in our previous work, the superhydrophobic property was found to depend on the SI‐ATRP conditions of HFBMA. As a series of work, in this present study, the effects of polymerization conditions, such as the initiator concentration, the molar ratio of monomer and initiator, and the polymerization temperature on the SI‐ATRP kinetics and the interrelation between the kinetics and the surface properties of the nanoparticles were investigated. The results showed that the SI‐ATRP of HFBMA was well controlled. The results also showed that both the surface microphase separation and roughness of the hybrid nanoparticles could be strengthened with the increase of the molecular weight of polymer‐grafted silica hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Thermosensitive hairy hybrid nanoparticles synthesized by surface-initiated atom transfer radical polymerization

This article reports on the synthesis of thermosensitive polymer brushes on silica nanoparticles by atom transfer radical polymerization (ATRP) and the study of thermo-induced phase transitions in water. Silica nanoparticles were prepared by the St?ber process and the surface was functionalized by an ATRP initiator. Surface-initiated ATRPs of methoxydi(ethylene glycol) methacrylate (DEGMMA) and methoxytri(ethylene glycol) methacrylate (TEGMMA) were carried out in THF at 40 degrees C in the presence of a free initiator, benzyl 2-bromoisobutyrate. The polymerizations were monitored by 1H NMR spectroscopy and gel permeation chromatography. The hairy hybrid nanoparticles were characterized by thermogravimetric analysis and scanning electron microscopy, and the thermoresponsive properties were investigated by variable temperature 1H NMR spectroscopy and dynamic light scattering. The cloud points of free poly(DEGMMA) and poly(TEGMMA) in water were around 25 and 48 degrees C, respectively. The thermo-induced phase transitions of polymer brushes on silica nanoparticles began at a lower temperature and continued over a broader range (4-10 degrees C) than those of free polymers in water (< 2 degrees C).     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via two‐step surface‐initiated ATRP: Synthesis,characterization, and wettability

Poly(siloxane‐fluoroacrylate)‐grafted silica hybrid nanoparticles were prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP). The silica nanoparticles with α‐bromo‐ester initiator group for copper‐mediated ATRP were prepared by the self‐assembled monolayers of (3‐aminopropyl)triethoxysilane and 2‐bromoisobutyrate bromide. Well‐defined diblock copolymer brushes consisting of poly(methacryloxypropyltrimethoxysilane) and poly(2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) blocks were obtained by using initial homopolymer brushes as the macroinitiators for the SI‐ATRP of the second monomer. Chemical compositions and structures of the nanoparticles were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Surface properties and morphology of the nanoparticles were investigated with X‐ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, and water contact angle measurement. It is revealed that the surfaces of the nanocomposites are rough at the microscale and nanoscale. The formation reason of the superhydrophobic surfaces was also discussed in this work. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A Novel Route to Organic–Inorganic Hybrid Nanomaterials

The in situ formation of functionalized silica nanoparticles is reported. The reactive stabilizers used in the study, [3‐(2‐bromoisobutyryl)propyl]triethoxysilane and [3‐(2‐bromoisobutyryl)propyl]ethoxydimethylsilane, have an atom transfer radical polymerization (ATRP) initiator at the noncondensable end. Condensation with tetraethoxysilane yields silica nanoparticles with a surface‐immobilized initiator. The size of these functionalized silica nanoparticles can be controlled by varying the time of initiator addition and initiator concentration. The silica particle sizes ranged from 10 to 300 nm. With the initiator functionalized silica nanoparticles, ATRP synthesis was performed with styrene, tert‐butyl acrylate, and methyl acrylate to produce organic–inorganic nanomaterials.

     

Growth of lightly crosslinked PHEMA brushes and capsule formation using pickering emulsion interface‐initiated ATRP

In this work, growth of lightly crosslinked poly(2‐hydroxyethyl methacrylate) (PHEMA) brushes and subsequent capsule formation using Pickering emulsion interface‐initiated atom transfer radical polymerization (PEII‐ATRP) were investigated. Initiator‐immobilized silica nanoparticles (2.5 initiators/nm²) assembled at the interface of paraffin oil‐in‐water emulsions and ultimately stable Pickering emulsions were formed. PEII‐ATRP was conducted in the water phase of Pickering emulsions from the part of the surfaces of initiator‐immobilized silica nanoparticles exposed to water by using copper(I) chloride/bipyridine as catalyst at 35 °C. As PHEMA has a character of lightly crosslinking when the polymerization occurs in water, novel hybrid capsules (“colloidosomes”) can be obtained and were observed by confocal laser scanning microscope (CLSM) and optical microscopy (OM). The semipermeability of the resultant hollow capsules was demonstrated by the diffusion of 1‐phenylazo‐2‐naphthol. Meanwhile, the conformation of PHEMA chains can be varied in different solvents, which affects the semipermeability of these hybrid hollow capsules. We expect these hollow capsules can be further utilized to develop microdevices for drugs or cells delivery. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1354–1367, 2009     

The preparation and characterization of carboxylic acid‐coated silica nanoparticles

The preparation of carboxylic acid‐coated silica nanoparticles was investigated. A monolayer of carboxylic acid residues with controllable graft density was anchored to the nanoparticle by a ring‐opening reaction with succinic anhydride. Poly(methacrylic acid) [poly(MAA)] grafted nanoparticles were prepared via a polymerization–deprotection strategy. Tert‐butyl methacrylate was polymerized from the surface of silica nanoparticles in a predictable manner and with excellent control over the molecular weight distribution. Subsequent removal of the tert‐butyl group resulted in poly (MAA) grafted nanoparticles. The polymer nanoparticles were also functionalized with dyes, which may be useful in tracking the particles in biological systems. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004     

Air‐tolerantly surface‐initiated AGET ATRP mediated by iron catalyst from silica nanoparticles

Well‐defined polymer‐nanoparticle hybrids were prepared by a newly reported method: atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) mediated by iron catalyst. The kinetics of the surface‐initiated AGET ATRP of methyl methacrylate from the silica nanoparticles, which was mediated by FeCl₃/triphenylphosphine as a catalyst complex, ascorbic acid as a reducing agent, N,N‐dimethylformamide as the solvent in the presence of a “sacrificial” (free) initiator, was studied. Both the free and grafted polymers were grown in a control manner. The chemical composition of the nanocomposites was characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and ¹H nuclear magnetic resonance spectroscopy. Thermogravimetric analysis was used to estimate the content of the grafted organic compound, and transmission electron micrographs was used to observe the core‐shell structure of the hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2006–2015, 2010     

Synthesis of poly(2‐hydroxyethyl methacrylate) in protic media through atom transfer radical polymerization using activators generated by electron transfer

Atom transfer radical polymerization (ATRP) using activators generated by electron transfer (AGET) was investigated for the controlled polymerization of 2‐hydroxyethyl methacrylate (HEMA) in a protic solvent, a 3/2 (v/v) mixture of methyl ethyl ketone and methanol. The AGET process enabled ATRP to be started with an air‐stable Cu(II) complex that was reduced in situ by tin(II) 2‐ethylhexanoate. The reaction temperature, Cu catalysts with different ligands, and variation of the initial concentration ratio of HEMA to the initiator were examined for the synthesis of well‐controlled poly(2‐hydroxyethyl methacrylate) and a poly(methyl methacrylate)‐b‐poly(2‐hydroxyethyl methacrylate) block copolymer. The level of control in AGET ATRP was similar to that in normal ATRP in protic solvents, and this resulted in a linear increase in the molecular weight with the conversion and a narrow molecular weight distribution (weight‐average molecular weight/number‐average molecular weight < 1.3). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3787–3796, 2006     

Synthesis of UV‐cured acrylic–silica hybrid nanocomposites from dendritic acrylic oligomer and acrylic‐functionalized silica

An acrylic–silica hybrid polymeric nanocomposite, comprising well‐distributed silica nanoparticles in acrylic matrix, has been synthesized at a markedly rapid rate from a dendritic acrylic oligomer (DAO) and an acrylic‐functionalized silica (A‐silica) via UV‐curing. A‐silica was made by functioning colloidal silica nanoparticles with 3‐methacryloxypropyltrimethoxysilane (MATMS) and DAO was formed by reacting 1,5‐diamino‐2‐methylpentane (MPMDA) with trimethylopropane triacrylate (TMPTA). The MATMS has been found either doubly or singly bonded to silica nanoparticles but not triply bonded, and the inclusion of MATMS into the siloxane network structure increases the size of silica nanoparticles. The well distribution of A‐silica and its good compatibility with DAO cause an increase in T_d of the acrylic–silica hybrid material. Silica nanoparticles are too small to cause any significant light scattering, and do not have deleterious effects on transparency. The “hybrid‐on‐polyethylene terephathalate” films exhibited satisfactory hardness and surface roughness because of silica nanoparticles. The preparation as well as the characterization of the constituting species and the final hybrid material are described in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8149–8158, 2008     

Synthesis of well-defined, polymer-grafted silica nanoparticles via reverse ATRP

The surface grafting onto ultrafine silica via reverse ATRP of methyl methacrylate initiated by peroxide groups introduced onto the surface and conventional ATRP of Styrene initiated by the hybrid nanoparticles were investigated. The introduction of peroxide groups onto the silica surface was achieved by the reaction of hydrogen peroxide with chlorosilyl groups, which were introduced by the treatment of silica with thionyl chloride. Well-defined polymer chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polymer layer. The polymerization was closely controlled in solution at quite low temperature such as 70 °C. In both cases, linear kinetic plots, linear plots of molecular weight (M_n) versus conversion, in hydrodynamic diameter with increasing conversion, and narrow molecular weight distributions (M_w/M_n) for the grafted polymer samples were observed. Hydrolysis of silica cores by hydrofluoric acid treatment enabled characterization of cleaved polymer using GPC. Ultrathin films of hybrid nanoparticles were examined using TEM and AFM.     

Synthesis of novel magnetic nanoparticles with urea or urethane moieties: Applications as catalysts in the Strecker synthesis of α‐aminonitriles

Four novel magnetic nanoparticle catalysts with urea or urethane moieties are reported. The silica‐coated magnetic nanoparticles were simply functionalized via addition of 3‐(triethoxysilyl)propylisocyanate (TESPIC), amine or amino alcohol. TESPIC with dual labile functional groups was used as a suitable precursor for the synthesis of urethane‐based catalysts. The newly synthesized catalysts were fully characterized using a variety of techniques. These functionalized magnetic nanoparticles were used as reusable catalysts in the Strecker synthesis of α‐aminonitrile derivatives under solvent‐free conditions at 50 °C.     

Synthesis of polymeric core–shell particles using surface‐initiated living free‐radical polymerization

An easy and novel approach to the synthesis of functionalized nanostructured polymeric particles is reported. The surfactant‐free emulsion polymerization of methyl methacrylate in the presence of the crosslinking reagent 2‐ethyl‐2‐(hydroxy methyl)‐1,3‐propanediol trimethacrylate was used to in situ crosslink colloid micelles to produce stable, crosslinked polymeric particles (diameter size ～ 100–300 nm). A functionalized methacrylate monomer, 2‐methacryloxyethyl‐2′‐bromoisobutyrate, containing a dormant atom transfer radical polymerization (ATRP) living free‐radical initiator, which is termed an inimer (initiator/monomer), was added to the solution during the polymerization to functionalize the surface of the particles with ATRP initiator groups. The surface‐initiated ATRP of different monomers was then carried out to produce core–shell‐type polymeric nanostructures. This versatile technique can be easily employed for the design of a wide variety of polymeric shells surrounding a crosslinked core while keeping good control over the sizes of the nanostructures. The particles were characterized with scanning electron microscopy, transmission electron microscopy, optical microscopy, dynamic light scattering, and Raman spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1575–1584, 2007     

Synthesis of Poly (methyl methacrylate)/Zinc Oxide Nanocomposite with Core-Shell Morphology by Atom Transfer Radical Polymerization

A method to prepare zinc oxide (ZnO) nanoparticles with a covalently bonded poly(methyl methacrylate) (PMMA) shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of zinc oxide nanoparticles through our novel method. Firstly, the surface of ZnO nanoparticle was treated with 3-aminopropyl triethoxysilane, a silane coupling agent, and then this functionalization nanoparticle was reacted with α-chloro phenyl acetyl chloride to prepare atom transfer radical polymerization macroinitiator. The metal-catalyzed radical polymerization of MMA with ZnOmacroinitiator was performed using a copper catalyst system to give the ZnO-based nanoparticles hybrids linking PMMA segments (poly (methyl methacrylate)/zinc oxide nanocomposite). These hybrid nanoparticles had an exceptionally good dispersability in organic solvents and were subjected to detailed characterization using FTIR, TEM and TGA and DSC analyzed.     

Synthesis and Controlled Polymerisation of a Novel Gramicidin S Analogue

Summary: The controlled polymerisation of a bulky, peptide‐based monomer was investigated. The cyclic β‐sheet forming decapeptide gramicidin S was modified with a methacrylate handle and subsequently polymerised via atom transfer radical polymerisation (ATRP), to yield a well‐defined gramicidin‐S‐containing polymer. The secondary structure of the peptide moiety was retained within the resulting polymer, as indicated by IR spectroscopy. This is the first example of the use of ATRP to create a synthetic polymer with a cyclic peptide as a side chain.

The gramicidin S based monomers synthesised here were then polymerised by ATRP.     

Reusable Nickel Nanoparticles‐Catalyzed Reductive Amination for Selective Synthesis of Primary Amines

The preparation of nickel nanoparticles as efficient reductive amination catalysts by pyrolysis of in situ generated Ni‐tartaric acid complex on silica is presented. The resulting stable and reusable Ni‐nanocatalyst enables the synthesis of functionalized and structurally diverse primary benzylic, heterocyclic and aliphatic amines starting from inexpensive and readily available carbonyl compounds and ammonia in presence of molecular hydrogen. Applying this Ni‐based amination protocol, ‐NH₂ moiety can be introduced in structurally complex compounds, for example, steroid derivatives and pharmaceuticals.     

Viscosity,particle size distribution,and structural investigation of tetramethyloxysilane/2‐hydroxyethyl methacrylate sols during the sol–gel process with acid and base catalysts

The tetramethoxysilane (TMOS)/2‐hydroxylethyl methacrylate (HEMA) hybrid gels were synthesized with acid and base catalysts, via the in situ polymerization of HEMA, with and without the cosolvent methanol. With methanol in the TMOS/HEMA sol, the enhanced esterification and depolymerization reactions of the silanols resulted in a slower growth of silica particles. The silica particles that were synthesized with an acid catalyst were less than 40 nm. The thermal resistance of the poly(2‐hydroxyethyl methacrylate) (PHEMA) chains was enhanced by the addition of colloidal silica. The Fourier transform infrared characterizations and the exothermal peaks on the differential scanning calorimetry traces of these hybrid gels indicated chemical hybridization occurring as a result of condensation of the colloid silica and PHEMA at higher temperatures. Hence, the residual weight content of the hybrid gel after its synthesis with the base catalyst was even higher than the content of TMOS in the hybrid sol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3476–3486, 2004     

Atom transfer radical polymerization of methyl methacrylate via reversibly supported catalysts on silica gel via self‐assembly

A reversible catalyst immobilization system via self‐assembly of hydrogen bonding between thymine anchored on silica gel support and 2,6‐diaminopyridine functionalized with a catalyst (copper bromide‐N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) complex) was developed for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). At elevated temperatures, the hydrogen bonding disassociated and released the catalyst as free small molecules for catalysis, which effectively mediated a living polymerization of MMA, producing PMMA with controlled molecular weight and narrow molecular weight distribution (<1.3). At room temperature, the catalyst assembled on the silica gel support by hydrogen bonding, and thus could be recovered and reused for a second run of ATRP. The recovered catalyst still mediated a living polymerization of MMA with reduced activity (54–64%), but had much improved control of the polymerization. The resulting PMMA had molecular weights very close to theoretical vales. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 22–30, 2004     

Hamilton Receptor‐Mediated Self‐Assembly of Orthogonally Functionalized Au and TiO2 Nanoparticles

A new prototype of reversible self‐assembly between functionalized gold and titanium dioxide nanoparticles (NPs) utilizing hydrogen bonding interactions was developed and established. The gold nanoparticles were functionalized with a Hamilton‐receptor functionality bearing a thiol moiety as anchoring group. The titanium dioxide nanoparticles were modified with cyanurate derivatives which contained phosphonic acids as anchoring groups. The host–guest type interaction between two functionalized nanoparticles yielded a highly integrated nanoparticle system in chloroform. Moreover, by presenting a competing ligand in an exchange reaction, the product of self‐assembly can be segregated into the individual soluble components of functionalized nanoparticles. The self‐assembly and the exchange reaction were followed and monitored in detail by UV/Vis spectroscopy. The structure of the self‐assembly product was investigated using scanning electron microscopy (SEM) and small‐angle X‐ray scattering (SAXS).     

以聚合物乳胶为模板经表面引发原子转移自由基聚合制备空心二氧化硅纳米微球

均匀的空心纳米及微米球因具有可裁剪结构及良好的光学性能和表面性能,而具有非常广泛的应用前景,空心胶囊是一类重要的材料,它是通过不同的化学和物理方法,直接除去壳-核粒子的内核而获得的,目前主要是通过控制表面沉积。或利用静电相互作用层层组装。制备空心胶囊,但前者易于产生独立的无机粒子沉淀,后者的步骤太过繁琐。