Electrochemical cyclability of oxysulfide spinel Li1.03Al0.2Mn1.8O3.96S0.04 material for lithium secondary batteries

Oxysulfide spinel, Li_1.03Al_0.2Mn_1.8O_3.96S_0.04 with well-developed octahedral structure was synthesized by a sol-gel method using glycolic acid as a chelating agent. The structural integrity of the oxysulfide spinel was characterized by charge–discharge cycling experiments and X-ray diffraction (XRD). The Li_1.03Al_0.2Mn_1.8O_3.96S_0.04 electrode shows excellent cyclability. The oxysulfide spinel after cycling retains its original cubic spinel phase in all operating voltage regions (4.4–1.15 V).     

Layered manganese oxide with O2 structure,Li(2/3)+x(Ni1/3Mn2/3)O2 as cathode for Li-ion batteries

Using LiI as the reducing agent, the compound O2-Li_(2/3)+x(Ni_1/3Mn_2/3)O₂, x∼1/3 (O2(Li+x)) has been prepared from the O2-Li_2/3(Ni_1/3Mn_2/3)O₂ (O2(Li)). Cyclic voltammetry and voltage-capacity profiles of the O2(Li+x) phase are qualitatively different from that of O2(Li) phase. The first extraction capacity of O2(Li+x) at C/10 rate is 190 mAh/g corresponding to the removal of 2/3 mole of Li from the compound. At C/5 rate it delivers a reversible capacity of 158 mAh/g at 25 °C and 184 mAh/g at 50 °C (vs Li metal; voltage window 2.5–4.6 V). In Li-ion cells, with MCMB anode and O2(Li+x) as cathode, a discharge capacity of 140 mAh/g was obtained at C/5 rate in the voltage window 2.5–4.5 V (25 °C). The charge–discharge cycling performance and the cyclic voltammograms reveal that O2(Li) and O2(Li+x) do not convert to the spinel structure.     

Structural change and capacity loss mechanism in orthorhombic Li/LiFeO2 system during cycling

Orthorhombic LiFeO₂ was synthesized at low temperature (150 °C) using a solid-state method. The Li/LiFeO₂ cell presented not only a high initial capacity of over 150 mAh/g, but also fairly good cycle retention of 73% after 50 cycles within a voltage range between 1.5 and 4.5 V. It was found that the orthorhombic phase of the LiFeO₂ material underwent a structural change to the spinel phase during cycling. Especially it showed severe structural changes during the first charge/discharge process, which might be the main reason to induce the capacity loss of the Li/LiFeO₂ system. We reported a new observation about the structural change mechanism of the orthorhombic Li/LiFeO₂ cell during cycling using in situ XRD and TEM analyses.     

Synthesis and electrochemical properties of yttrium-doped LiMn<Subscript>0.98</Subscript>Y<Subscript>0.02</Subscript>O<Subscript>2</Subscript> for lithium secondary batteries

Yttrium-doped lithium manganese oxide (LiMn_0.98Y_0.02O₂) was prepared by ion exchange of lithium for sodium in NaMn_0.98Y_0.02O₂ precursors obtained by using rheological phase reaction method. This material had small particle size, which was composed of grain size of about 100 nm. Especially, LiMn_0.98Y_0.02O₂ delivered the initial discharge capacity of about 191 mA h g⁻¹ at room temperature when cycled between 2.0 and 4.4 V vs Li/Li⁺. Moreover, it showed an excellent cycling behavior, its specific capacity remained above 173 mA h g⁻¹ after 20 cycles, and the material did not transform into spinel structure during the electrochemical cycling according to the cyclic voltammograms and X-ray powder diffraction. The electrochemical results revealed that the doping of Y³⁺ improved the performance of LiMnO₂ considerably.     

Synthesis and electrochemical characterization of xLi(Ni0.8Co0.15Mg0.05)O2–(1−x)Li[Li1/3Mn2/3]O2 (0.0 ≤ x ≤ 1.0) cathodes for Li rechargeable batteries

Using solution based processing route, we have successfully synthesized xLi(Ni_0.8Co_0.15Mg_0.05)O₂–(1?x)Li[Li_1/3Mn_2/3]O₂ (0.0 ≤ x ≤ 1.0) cathode materials for lithium rechargeable batteries. The phase formation behavior of these cathode materials is characterized by X-ray diffraction measurements. The Galvanostatic charge–discharge characteristic of these cathodes is reported in various cut-off voltage limits. When these composite cathodes are charged to 4.8 V, electrochemical extraction of lithium takes place from active (Li[Ni_0.8Co_0.15Mg_0.05]O₂) as well as inactive (Li[Li_1/3Mn_2/3]O₂) components. Good cycleability of these cathodes is obtained when cycled in the cut-off voltage limits of 4.6–3.0 V. The cycleability of these cathodes are deteriorated when charged above 4.8 V and deep discharged up to 1.2 V followed by repeated cycling in these voltage limits. Based on the analyses of impedance spectra at various charge and discharge states, the probable reasons for such findings are discussed.     

Trace Nb-doped Na_(0.7)Ni_(0.3)Co_(0.1)Mn_(0.6)O_2 with suppressed voltage decay and enhanced low temperature performance

The P2-type manganese-based Na_(0.7)MnO_2 cathode materials attract great interest due to their high theoretical capacity.However,these materials suffer from rapid capacity fading,poor rate performance and severe voltage decay resulting from phase transition and sluggish reaction kinetics.In this work we report a novel Nb-doped Na_(0.7) [Ni_(0.3)Co_(0.1)Mn_(0.6)]_(1-x)Nb_xO_2 with significantly suppre ssed voltage decay and enhanced cycling stability.The strong Nb-O bond can efficiently stabilize the TMO fra mework,and the as prepared material demonstrates much lower discharge midpoint voltage decay(0.132 V) than that of pristine one(0.319 V) after 200 cycles.Consequently,a remarkably improved cycling perfo rmance with a capacity retention of 87.9% after 200 cycle at 0.5 C is achieved,showing a 2.4 fold improvement as compared to the control sample Na_(0.7)Ni_(0.3)Co_(0.1)Mn_(0.6)O_2(～37% rotation).Even at 2 C,a capacity retention of 68.4% is retained after 500 cycles.Remarkably,the as prepared material can be applied at low temperature of-20℃,showing a capacity retention of 81% as compared to that at room temperature.     

Graphene-encapsulated Fe3O4 nanoparticles with 3D laminated structure as superior anode in lithium ion batteries

Fe₃O₄–graphene composites with three‐dimensional laminated structures have been synthesised by a simple in situ hydrothermal method. From field‐emission and transmission electron microscopy results, the Fe₃O₄ nanoparticles, around 3–15 nm in size, are highly encapsulated in a graphene nanosheet matrix. The reversible Li‐cycling properties of Fe₃O₄–graphene have been evaluated by galvanostatic discharge–charge cycling, cyclic voltammetry and impedance spectroscopy. Results show that the Fe₃O₄–graphene nanocomposite with a graphene content of 38.0 wt % exhibits a stable capacity of about 650 mAh g^?1 with no noticeable fading for up to 100 cycles in the voltage range of 0.0–3.0 V. The superior performance of Fe₃O₄–graphene is clearly established by comparison of the results with those from bare Fe₃O₄. The graphene nanosheets in the composite materials could act not only as lithium storage active materials, but also as an electronically conductive matrix to improve the electrochemical performance of Fe₃O₄.     

An Ultra‐Long‐Life Lithium‐Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three‐in‐One Surface Modification for Lithium‐Ion Batteries

Voltage decay and capacity fading are the main challenges for the commercialization of Li‐rich Mn‐based layered oxides (LLOs). Now, a three‐in‐one surface treatment is designed via the pyrolysis of urea to improve the voltage and capacity stability of Li_1.2Mn_0.6Ni_0.2O₂ (LMNO), by which oxygen vacancies, spinel phase integration, and N‐doped carbon nanolayers are synchronously built on the surface of LMNO microspheres. Oxygen vacancies and spinel phase integration suppress irreversible O₂ release and help lithium ion diffusion, while N‐doped carbon nanolayer mitigates the corrosion of electrolyte with excellent conductivity. The electrochemical performance of LMNO after the treatment improves significantly; the capacity retention rate after 500 cycles at 1 C is still as high as 89.9 % with a very small voltage fading rate of 1.09 mV cycle^?1. This three‐in‐one surface treatment strategy can suppress the voltage decay and capacity fading of LLOs.     

ZrO2包覆的层状富锂正极材料0.6Li[Li1/3Mn2/3]O2·0.4LiNi5/12Mn5/12Co1/6O2的电化学性能

采用喷雾干燥法合成了富锂层状氧化物正极材料0.6Li[Li_1/3Mn_2/3]O₂·0.4LiNi_5/12Mn_5/12Co_1/6O₂(简称LNMCO),并使用Zr (CH₃COO)₄进行ZrO₂的包覆改性。TEM测试结果显示纳米级的ZrO₂颗粒附着在LNMCO的表面。包覆质量分数为1.5%的ZrO₂包覆样品的首圈库伦效率和放电比容量有着显著提升,在室温下其首圈库伦效率和放电比容量(电流密度：20 mA·g^-1,电压：2.0~4.8 V)分别为87.2%,279.3 mAh·g^-1,而原样则为75.1%,224.1 mAh·g^-1,循环100圈之后,1.5% ZrO₂包覆样品的放电比容量为248.3 mAh·g^-1,容量保持率为88.9%,高于原样的195.9 mAh·g^-1和87.4%。     

Synthesis of Monoclinic Li_(0.33)MnO_2 and Its Electrochemical Properties in Different Potential Windows

Li0.33MnO2 cathode material was synthesized by solid state reaction. The material showed a small coherent domain size about 10 nm determined by X-ray diffraction and transmission electron microscopy. The electrochemical properties of the material were studied in different potential windows of 3.5―2.0 V and 4.3―2.0 V. An irreversible transformation to spinel phase was observed in the initial several cycles, which was more prominent on cycling at 4.3―2.0 V. Electrochemical impedance spectroscopy showed that the Li+ diffusion coefficient of the material was about 2×10–9 cm2/s. Li0.33MnO2 showed a reversible discharge capacity of 140 and 200 mA·h/g in the potential windows of 3.5―2.0 V and 4.3―2.0 V, respectively. But the capacity retention at 4.3―2.0 V was poor due to the thicker spinel layer formed on the material surface.     

An O3‐type Oxide with Low Sodium Content as the Phase‐Transition‐Free Anode for Sodium‐Ion Batteries

Layered transition metal oxides Na_xMO₂ (M=transition metal) with P2 or O3 structure have attracted attention in sodium‐ion batteries (NIBs). A universal law is found to distinguish structural competition between P2 and O3 types based on the ratio of interlayer distances of the alkali metal layer d_(O‐Na‐O) and transition‐metal layer d_(O‐M‐O). The ratio of about 1.62 can be used as an indicator. O3‐type Na_0.66Mg_0.34Ti_0.66O₂ oxide is prepared as a stable anode for NIBs, in which the low Na‐content (ca. 0.66) usually undergoes a P2‐type structure with respect to Na_xMO₂. This material delivers an available capacity of about 98 mAh g^?1 within a voltage range of 0.4–2.0 V and exhibits a better cycling stability (ca. 94.2 % of capacity retention after 128 cycles). In situ X‐ray diffraction reveals a single‐phase reaction in the discharge–charge process, which is different from the common phase transitions reported in O3‐type electrodes, ensuring long‐term cycling stability.     

Organic Dicarboxylate Negative Electrode Materials with Remarkably Small Strain for High‐Voltage Bipolar Batteries

As advanced negative electrodes for powerful and useful high‐voltage bipolar batteries, an intercalated metal–organic framework (iMOF), 2,6‐naphthalene dicarboxylate dilithium, is described which has an organic‐inorganic layered structure of π‐stacked naphthalene and tetrahedral LiO₄ units. The material shows a reversible two‐electron‐transfer Li intercalation at a flat potential of 0.8 V with a small polarization. Detailed crystal structure analysis during Li intercalation shows the layered framework to be maintained and its volume change is only 0.33 %. The material possesses two‐dimensional pathways for efficient electron and Li⁺ transport formed by Li‐doped naphthalene packing and tetrahedral LiO₃C network. A cell with a high potential operating LiNi_0.5Mn_1.5O₄ spinel positive and the proposed negative electrodes exhibited favorable cycle performance (96 % capacity retention after 100 cycles), high specific energy (300 Wh kg^?1), and high specific power (5 kW kg^?1). An 8 V bipolar cell was also constructed by connecting only two cells in series.     

层状锰酸锂衍生物的阳离子价态与锂电池的电化学性能研究

采用溶胶-凝胶法, 通过锂盐、镍盐、钴盐与锰盐生成锂镍钴锰氧化合物的前驱体, 随后采用高温固相法合成了Li(Mn_1/3Co_1/3Ni_1/3)O₂. 借助于X射线光电子能谱(XPS)、X射线衍射(XRD)、循环伏安(CV)及充放电测试等现代测试手段研究了材料的晶型结构、离子价态及电化学性能. 前驱体经950 ℃煅烧可获得晶体结构完整、晶胞参数为a＝0.2864 nm, c＝1.4235 nm的六方层状Li(Mn_1/3Co_1/3Ni_1/3)O₂化合物; XPS结果表明Li(Mn_1/3Co_1/3Ni_1/3)O₂化合物表面上的Mn, Ni和Co分别以Mn^4＋, Ni^2＋和Co^3＋存在; 材料的高温放电比容量比室温要高, 在55 ℃下, 在2.5～4.6 V电压范围内, 电流密度为28 mA/g时材料首次放电容量195 mAh/g, 循环10次后容量保持在170 mAh/g; 循环伏安曲线上3.7 V和4.4 V的氧化还原过程对应于Ni^2＋/4＋和Co^3＋/4＋氧化还原电对的反应.     

Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution

To improve the electrochemical properties of Li[Ni_1/3Co_1/3Mn_1/3]O₂ at high charge end voltage (4.6 V), a series of the mixed transition metal compounds, Li(Ni_1/3Co_{1/3 − x} Mn_1/3M _x )O₂ (M = Mg, Cr, Al; x = 0.05), were synthesized via hydroxide coprecipitation method. The effects of doping Mg, Cr, and Al on the structure and the electrochemical performances of Li[Ni_1/3Co_1/3Mn_1/3]O₂ were compared by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. The XRD results show that all the samples keep layered structures with R3m space group as the Li[Ni_1/3Co_1/3Mn_1/3]O₂. SEM images show that all the compounds have spherical shapes and the Cr-doped sample has the largest particle size. Furthermore, galvanostatic charge–discharge tests confirm that the Cr-doped electrode shows improved cycling performance than the undoped material. The capacity retention of Li(Ni_1/3Co_{1/3 − 0.05}Mn_1/3Cr_0.05)O₂ is 97% during 50 cycles at 2.8∼4.6 V. The improved cycling performance at high voltage can be attributed to the larger particle size and the prevention of charge transfer resistance (R _ct) increase during cycling.     

Synthesis of nano-crystalline LiFeO2 material with advanced battery performance

LiFeO₂ has been synthesized at low temperature (150 °C) using the solid-state method. It was composed of orthorhombic LiFeO₂ and small amount of spinel LiFe₅O₈ phases. A Li/LiFeO₂ cell showed not only a fairly high initial discharge capacity of over 150 mAh/g, but also a good cycle retention rate at room temperature. During the cycling test, the Li/LiFeO₂ cell exhibited a unique abrupt capacity drop near the 13th cycle and continuously showed an excellent cycling performance of over 99% for 25 cycles. We found that the orthorhombic LiFeO₂ underwent a structural change to the spinel phase during the charge/discharge process which resulted in the capacity decline during the long-term cycling.     

Synthesis of Single‐Crystalline Spinel LiMn2O4 Nanorods for Lithium‐Ion Batteries with High Rate Capability and Long Cycle Life

The long‐standing challenge associated with capacity fading of spinel LiMn₂O₄ cathode material for lithium‐ion batteries is investigated. Single‐crystalline spinel LiMn₂O₄ nanorods were successfully synthesized by a template‐engaged method. Porous Mn₃O₄ nanorods were used as self‐sacrificial templates, into which LiOH was infiltrated by a vacuum‐assisted impregnation route. When used as cathode materials for lithium‐ion batteries, the spinel LiMn₂O₄ nanorods exhibited superior long cycle life owing to the one‐dimensional nanorod structure, single‐crystallinity, and Li‐rich effect. LiMn₂O₄ nanorods retained 95.6 % of the initial capacity after 1000 cycles at 3C rate. In particular, the nanorod morphology of the spinel LiMn₂O₄ was well‐preserved after a long‐term cycling, suggesting the ultrahigh structural stability of the single crystalline spinel LiMn₂O₄ nanorods. This result shows the promising applications of single‐crystalline spinel LiMn₂O₄ nanorods as cathode materials for lithium‐ion batteries with high rate capability and long cycle life.     

Niobium(V) Oxynitride: Synthesis,Characterization, and Feasibility as Anode Material for Rechargeable Lithium‐Ion Batteries

The decomposition reaction of niobium(V) oxytrichloride ammoniate to the oxynitride of niobium in the 5+ oxidation state was developed in a methodological way. By combining elemental analysis, Rietveld refinements of X‐ray and neutron diffraction data, SEM and TEM, the sample compound was identified as approximately 5 nm‐diameter particles of NbO_1.3(1)N_0.7(1) crystallizing with baddeleyite‐type structure. The thermal stability of this compound was studied in detail by thermogravimetric/differential thermal analysis and temperature‐dependent X‐ray diffraction. Moreover, the electrochemical uptake and release by the galvanostatic cycling method of pure and carbon‐coated NbO_1.3(1)N_0.7(1) versus lithium was investigated as an example of an Li‐free transition‐metal oxynitride. The results showed that reversible capacities as high as 250 and 80 A h kg^?1 can be reached in voltage ranges of 0.05–3 and 1–3 V, respectively. Furthermore, a plausible mechanism for the charge–discharge reaction is proposed.     

Synergistic Dual‐Additive Electrolyte Enables Practical Lithium‐Metal Batteries

A rechargeable Li metal anode coupled with a high‐voltage cathode is a promising approach to high‐energy‐density batteries exceeding 300 Wh kg^?1. Reported here is an advanced dual‐additive electrolyte containing a unique solvation structure and it comprises a tris(pentafluorophenyl)borane additive and LiNO₃ in a carbonate‐based electrolyte. This system generates a robust outer Li₂O solid electrolyte interface and F‐ and B‐containing conformal cathode electrolyte interphase. The resulting stable ion transport kinetics enables excellent cycling of Li/LiNi_0.8Mn_0.1Co_0.1O₂ for 140 cycles with 80 % capacity retention under highly challenging conditions (≈295.1 Wh kg^?1 at cell‐level). The electrolyte also exhibits high cycling stability for a 4.6 V LiCoO₂ (160 cycles with 89.8 % capacity retention) cathode and 4.95 V LiNi_0.5Mn_1.5O₄ cathode.     

Electrochemical lithium and sodium insertion studies in 3D metal oxy-phosphate framework MoWO3(PO4)2 for battery applications

A new type of three-dimensional (3D) oxy-phosphate materials are explored for the application of Li and Na batteries. The molybdenum tungsten oxy phosphate, MoWO₃(PO₄)₂, was synthesized by solid-state method and evaluated for Li/Na insertion/de-insertion electrode material for the first time. The cell at charged state (vs. Li⁺/Li) showed a discharge capacity of 786 mAh g⁻¹ within the voltage window of 0.3 V with amorphization of crystalline MoWO₃(PO₄)₂ as observed from ex-situ powder XRD analysis. The structural integrity was revealed in this material, even with nearly more than 5 Li⁺ ions into the lattice, leading to the discharge capacity of 250 mAh g⁻¹. The reversible charge/discharge behavior with insertion/de-insertion of 2.4 Li⁺ ions in the voltage range of 1.65 − 3.5 V resulted in 110 and 95 mAh g⁻¹ at C/10 and C/5 rates, respectively. On the other hand, poor cycling performance was noticed for Na ion insertion and desertion, with a discharge capacity of 250 mAh/g within the voltage range of 0.3 − 3.5 V (vs. Na⁺/Na).

     

Mesoporous MnCo2O4 with a Flake‐Like Structure as Advanced Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A mesoporous flake‐like manganese‐cobalt composite oxide (MnCo₂O₄) is synthesized successfully through the hydrothermal method. The crystalline phase and morphology of the materials are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller methods. The flake‐like MnCo₂O₄ is evaluated as the anode material for lithium‐ion batteries. Owing to its mesoporous nature, it exhibits a high reversible capacity of 1066 mA h g^?1, good rate capability, and superior cycling stability. As an electrode material for supercapacitors, the flake‐like MnCo₂O₄ also demonstrates a high supercapacitance of 1487 F g^?1 at a current density of 1 A g^?1, and an exceptional cycling performance over 2000 charge/discharge cycles.