磺酸型水溶性膦配体的合成

以季鳞盐[Ph2P(CH2OH)2]^ Cl^-与含磺酸根的胺的曼尼希反应合成了水溶性更大的含Ph2PCH2N配位基团的磺酸型膦配体[(Et3NH)2][Ph2PCH2N(CH2CH2SO3)2(2a)和[(Et3NH)2][O3SCH2CH2N(CH2PPh2)CH2CH2N(CH2PPh2)CH2CH2SO3](2b)，用NMR、MS、IR等对该膦配体的结构进行了表征。25℃时膦配体2a在水中的溶解度为0．21g／mL，在乙醇中为0．29g／mL。膦配体2b的SO3H与Ph2P的摩尔比较低，在水中溶解度为0．11g/mL，在乙醇中为0．15g／mL。     

N-四氢糠基PNP配体/铬催化体系及其乙烯选择性齐聚性能

通过胺基锂盐分离的方法合成了一种未有报道过的N-四氢糠基PNP配体E.E分别与Cr Cl3(THF)3和Cr(CO)6反应生成化合物[{Ph2PN(CH2OC4H7)PPh2}Cr Cl2(μ-Cl)]2(1)和[Ph2PN(CH2OC4H7)PPh2]Cr(CO)4(2).这三个化合物通过谱学和元素分析表征,化合物2进一步经过X射线单晶结构确认.在甲基铝氧烷(MAO)或其它助剂作用下,考察了1、2以及E/Cr Cl3(THF)3、E/Cr(acac)3、E/Cr Cl2(THF)2催化体系催化乙烯齐聚的性能.这些体系高选择性地催化乙烯四聚,最高活性为15.9 kg(product)/g(Cr)·h,1-辛烯的选择性最高可达63.6%.     

用于温控相转移纳米铑催化反应的水/有机两相新体系

在水/1-戊醇两相体系中实现了以温控配体Ph2P(CH2CH2O)22CH3为稳定剂的Rh纳米催化剂的温控相转移功能,并将其应用于烯烃催化加氢反应,在优化的反应条件下,环己烯的转化率和环己烷的收率均为99%.通过简单的相分离即可将催化剂从产物中分离出来,重复使用8次,其活性保持不变.     

单氢钌配合物催化氢化苯乙烯的位阻效应

研究了溶剂分别为 THF, H2O/THF, CH3CN/THF以及ROH/THF (R＝Me, Et, iso-Pr, tert-Bu)条件下TpRuH(PPh3)- (CH3CN) [Tp＝hydrotris(pyrazolyl)borate]催化氢化苯乙烯生成乙基苯的反应, 发现向干燥THF体系中添加微量 H2O, CH3CN或ROH对催化反应都具有显著的促进作用. 催化机理研究表明, 小分子添加物首先取代TpRuH(PPh3)(CH3CN)中的PPh3配体形成中间体TpRuH(CH3CN)L (L＝H2O, CH3CN或ROH), 降低空间位阻, CH3CN配体随后被苯乙烯取代生成中间体 TpRuH(H2C＝CHPh)L; η2-苯乙烯插入Ru—H键后形成的Ru-烷基中间物与H2反应生成η2-H2配合物 TpRu(CH2CH2Ph)(H2)L或TpRu[CH(CH3)Ph](H2)L, 进而发生σ-复分解反应生成乙基苯完成催化循环.     

膦配体链长对锚合膦配体修饰的Rh/SiO_2催化剂上氢甲酰化反应性能的影响(英文)

烯烃氢甲酰化反应产物醛是生产多种有机化合物的重要中间体,具有重要的工业价值.均相催化剂具有反应条件温和及催化效率高的优点,因而成为工业应用的主要催化体系,但催化剂分离复杂且昂贵.多相催化剂具有易分离和易回收的优点,但在氢甲酰化反应中的活性和选择性较低,因而大大阻碍了其在工业上的应用.为了得到兼具两种催化剂优点的新型催化剂,人们进行了数十年的研究,均相催化剂多相化便是其中一个研究热点.实现该策略最常用的一个方法是将均相催化剂固载到载体上,以此来达到催化剂易从反应物及产物中分离,同时保有高活性高选择性的目的.通过化学键将金属配合物的配体键合到载体上已经取得了一定的成功,但依然存在着活性组分流失和催化剂失活的问题.本课题组开发了一种锚合膦配体修饰的Rh/SiO_2新型催化剂,在乙烯氢甲酰化反应中表现出卓越的稳定性,反应1000 h后依然没有出现活性下降和组分流失的现象,这是因为配体和活性金属同时被固载在载体SiO_2上.但是由于配体和活性金属都不能自由移动,很多配体不能与金属原子有效接触,起不到配位效应,因而催化剂活性仍不够高.因此,为了提高锚合膦配体修饰的Rh/SiO_2催化剂的活性,我们合成了具有较长链长的膦DPPPTS,并与商业购买的链长较短的膦DPPETS做对比,研究锚合膦配体链长和催化剂活性的关系.使用N_2物理吸附、原位红外光谱(FT-IR)和固体~(31)P核磁共振(NMR)等探讨了膦配体链长影响催化性能的原因.固定床上乙烯氢甲酰化反应结果表明,当膦配体的链长增长一个亚甲基长度后,反应稳定后催化剂的活性提高了一倍以上.N_2物理吸附实验表明,延长配体的链长对催化剂结构性质的影响不大,因而也不会改变反应时的传质.催化剂吸附合成气(CO:H_2=1:1)的原位FT-IR结果表明,不同链长膦配体修饰的Rh/SiO_2催化剂上均原位生成了类似于用于均相氢甲酰化反应的Wilkinson型催化剂的活性物种HRh(CO)_2(DPPPTS)_2[或HRh(CO)_2(DPPETS)_2],以及吸附在Rh上的线式CO.这两种吸附物种均利于氢甲酰化反应的进行,其中以前者活性更好.从原位FT-IR结果同样看出,锚合链长较长的膦配体的催化剂(DPPPTS-Rh/SiO_2)上原位生成的活性物种量更多,因而催化活性更高.固体~(31)P NMR结果表明,催化剂上的膦以自由态的膦(高场峰β)和与Rh配位的膦(低场峰α)两种形式存在.α峰面积和β峰面积之比(r)越高代表与Rh配位的膦配体占总膦量的比例越高.发现DPPPTS-Rh/SiO_2催化剂的r值(1.31)高于DPPETS-Rh/SiO_2催化剂(1.05),即前者与Rh配位生成活性物种的膦配体的比例更高.结合原位FT-IR和固体~(31)P NMR的结果可知,链长较长的DPPPTS更容易与Rh配位,从而生成更多的铑膦配合物活性物种,因而催化剂活性更高.因此,增长锚合膦配体的链长有助于提高其修饰的Rh/SiO_2催化剂的活性.     

双磷配体的合成及铑—双磷配体催化剂为混合辛烯氢甲酰化反应的催？…

合成了具有不同电子效应的３种双膦配体。其给电子性为Ｐｈ２Ｐ（ＣＨ２）４ＰＰｈ２〉Ｐｈ２Ｐ（Ｏ）（ＣＨ２）４ＰＰｈ２〉Ｐｈ２Ｐ（Ｏ）（ＣＨ２）４Ｐ（Ｏ）Ｐｈ２。这３种配体与醋酸铑二聚体配合物构成的催化剂,在混合辛烯的均相氢甲酰化反应中表现出的活性和选择性与配体给电子性强弱的次序完全相反。我们认为,具有弱配位性的「Ｒｈ（ＣＨ３ＣＯＯ）２」２Ｐｈ２Ｐ（Ｏ）（ＣＨ２）４Ｐ（Ｏ）Ｐｈ２催化体系,因其形成的活     

铑-膦配位催化烯烃氢甲酰化反应研究

本文研究了由Rh2(CO)4CI2分别与两种膦配体4－下丁苯基二苯基膦（1）和4－正辛苯基二苯基磷（2）形成的原位催化剂体系对烯烃氢甲酰化反应的催化性能。对影响反应的各种因素,如P／Rh物质的量比、反应温度、反应压力,不同烯烃等的影响作了探讨。结果表明,配体1、2与Rh2(CO4)CI2形成的原位催化剂体系的催化活性与选择性均高于结构相似的PPh3,在相同的条件下,不同烯烃的氢甲酰化反应活性依直链烯烃＞苯乙烯＞直链内烯＞环己烯的顺序递增。     

二氧化硅固载Ru基催化剂上二氧化碳加氢合成甲酸的研究(III): 配体对催化剂反应性能的影响

考察了不同配体对原位合成的固载Ru基催化剂上CO2加氢合成HCOOH反应活性的影响,对于以单齿三苯基类ZPh3分子为配体的催化剂,活性大小顺序为:PPh3>AsPh3>NPh3.以PPh3为配体时,其相应的原位合成催化剂上HCOOH的TOF值为656h-1.其次,双齿膦配体的使用能带来比单齿膦配体更高的活性.以dppe[1,2-双(二苯基膦基)乙烷]为配体时,其相应的原位合成催化剂上HCOOH的TOF值为1190h-1.量子化学的理论计算结果表明,具有适中的σ给予性和π接受性,较小的空间位阻,较好的电子离域作用的PPh3配体性能优于其它单齿三苯基类配体.而具有较好的电子离域作用,并且有螯合作用的双齿膦配体性能优于单齿膦配体.     

(Ph3P)2,Co(CO)2Cl和(dppe-P,P)2CO(CO)+的分子轨道研究

本文对(PH3P)2, Co(CO)2Cl和(dppe-P,P)2CO(CO)+(dppe=Ph2CH2CH2PPh2)五配位C2O对称性模型化合物进行了分轨道研究, 结果表明, 钴的3d轨道很少参与成键, 钴的4s, 4P与配体的S,P轨道通过形式上的二电子三中心键和二电子二中心键的相互作用构成五配位, 此外, 还解释了这两种化合物不同稳定性的原因。     

一类新型水溶性膦配体及其钠盐的合成

在温和的反应条件下,以季Lin盐[Ph2P(CH2OH)2]^ Cl^-与含醚键和有机膦酸根的胺H2O3PCH2N CH2-CH2（OCH2CH2）nNH2(n=1,2,3)的曼尼希反应,高产率合成了含Ph2PCH2N=配位基团的水溶性膦配体,用NMR、MS、IR、UV和光电子能谱等对其结构进行了表征。     

Monohydride-Dichloro Rhodium(III) Complexes with Chiral Diphosphine Ligands as Catalysts for Asymmetric Hydrogenation of Olefinic Substrates

We report full details of the synthesis and characterization of monohydride-dichloro rhodium(III) complexes bearing chiral diphosphine ligands, such as (S)-BINAP, (S)-DM-SEGPHOS, and (S)-DTBM-SEGPHOS, producing cationic triply chloride bridged dinuclear rhodium(III) complexes ( 1 a : (S)-BINAP; 1 b : (S)-DM-SEGPHOS) and a neutral mononuclear monohydride-dichloro rhodium(III) complex ( 1 c : (S)-DTBM-SEGPHOS) in high yield and high purity. Their solid state structure and solution behavior were determined by crystallographic studies as well as full spectral data, including DOSY NMR spectroscopy. Among these three complexes, 1 c has a rigid pocket surrounded by two chloride atoms bound to the rhodium atom together with one tBu group of (S)-DTBM-SEGPHOS for fitting to simple olefins without any coordinating functional groups. Complex 1 c exhibited superior catalytic activity and enantioselectivity for asymmetric hydrogenation of exo-olefins and olefinic substrates. The catalytic activity of 1 c was compared with that of well-demonstrated dihydride species derived in situ from rhodium(I) precursors such as [Rh(cod)Cl]₂ and [Rh(cod)₂]⁺[BF₄]⁻ upon mixing with (S)-DTBM-SEGPHOS under dihydrogen.     

Chloride‐Bridged Dinuclear Rhodium(III) Complexes Bearing Chiral Diphosphine Ligands: Catalyst Precursors for Asymmetric Hydrogenation of Simple Olefins

Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride‐bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]₂, chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)‐prop‐1‐ene‐1,2‐diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.     

Synthesis,Characterization, and X‐ray Crystal Structures of (Diphosphine)Ni(dmit) and (Diphosphine)Ni(dmio) (Diphosphine = dppv,dppb) Complexes

Four complexes with the ligands dmit and dmio were synthesized. Reaction of (PhCO)₂(dmit) and (PhCO)₂(dmio) with MeONa afforded the intermediates 2‐thioxo‐1,3‐dithiole‐4,5‐dithiolate dianion and 2‐oxo‐1,3‐dithiole‐4,5‐dithiolate dianion, respectively. Reaction of the two dianions with (diphosphine)NiCl₂ [diphosphine = (Z)‐1, 2‐bis(diphenylphosphanyl)ethane (dppv), 1,2‐bis(diphenylphosphanyl)benzene (dppb)] gave (dppv)Ni(dmit) ( 1 ), (dppb)Ni(dmit) ( 2 ), (dppv)Ni(dmio) ( 3 ), and (dppb)Ni(dmio) ( 4 ). This synthesis route was found to be an efficient pathway to prepare dmit and dmio ligand complexes. Complexes, 1 – 4 were fully characterized by elemental analysis and IR, ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy. In addition, the molecular structures of 1 , 3 and 4 were established by X‐ray diffraction.     

新的双胺双膦钌配合物的合成、表征和催化性能

Polydentate ligands, N,N'-bis[o-(diphenylphosphino)benzylidene]-1,2-propane-diamine [P2N2Me for short] and N,N'-bis[o-(diphenylphosphino)benzy1]-1,2-propanediamine [P2N2 H4Me for short] have been synthesized. The interaction of RuCl2(DMSO)4 with one equivalent of P2N2Me or P2N2H4Me in refluxing toluene gave trans-RuCl2(P2N2Me) and trans-RuCl2(P2N4H4Me) in good yield, respectively. The ligands and the complexes have been fully characterized by elemental analysis and spectroscopic methods. The complexes act as an excellent catalyst precursor in hydrogen transfer hydrogenation of acetophenone in catalyst: acetophenone :iso-PrOK of 1: 100: 15, leading to 2-phenylethanol of 89-96% yield.     

六甲氧基联苯手性双膦配体的合成方法改进

从3,4,5-三甲氧基溴苯出发,利用直接溴代,Ullmann反应等合成了手性双膦配体(R)-和(S)-4,4′,5,5′,6,6′-六甲氧基-2,2′-二(二苯基膦基)-1,1′-联苯(hexa-MeO-BIPHEP),其结构经1HNMR,31PNMR和MS表征。     

Syntheses, Spectra, and Structures of (Diphosphine)platinum(II) Carbonate Complexes

A variety of (diphosphine)platinum(II) carbonate complexes, (LL)Pt(CO(3)), are readily prepared from the corresponding (diphosphine)platinum dichlorides by treatment with silver carbonate in dichoromethane solution provided that water is present. This reaction also permits facile preparation of analogous (13)C-labeled complexes. The carbonate ligands in these complexes have been characterized by IR and (13)C NMR spectroscopy. Alternative preparative routes involve conversion of the precursor dichlorides to the corresponding dialkoxides or diphenoxides, followed by treatment with water and carbon dioxide. Various reaction intermediates have been spectroscopically observed in the latter syntheses. Two crystalline modifications of (Ph(2)PCH(2)CH(2)CH(2)PPh(2))Pt(CO(3)), one with and one without a dichloromethane of solvation, have been studied by single-crystal X-ray diffraction. Crystal data for PtP(2)O(3)C(28)H(26): P2(1)/c, Z = 4, T = 200 K, a = 10.362(8) ?, b = 14.743(6) ?, c = 19.183(10) ?, beta = 122.69(6) degrees. Crystal data for PtP(2)O(3)C(28)H(26).CH(2)Cl(2): P2(1)/c, Z = 4, T approximately 298 K, a = 11.744(2) ?, b = 15.526(3) ?, c = 15.866(3) ?, beta = 101.58(1) degrees.     

Synthesis and cytotoxicity of methyl-substituted 8-quinolineselenolates of ruthenium,rhodium, osmium,and iridium

A series of 2-methyl, 4-methyl, and 2,4-dimethyl-8-quinolineselenolates of ruthenium, rhodium, osmium, and iridium has been synthesized and their cytotoxicity towards HT-1080 (human fibrosarcoma) and MG-22A (mouse hepatoma) tumor cells studied. It was found that all of the osmium complexes had a high cytotoxicity towards both cell lines. Their toxicity towards the normal mouse embryonic fibroblasts NIH-3T3 depends on the position and number of methyl groups in the quinoline ring and decreases in the order 2-Me > 4-Me > 2,4-Me₂. The greatest selectivity in cytoxic activity is noted for iridium 4-methyl-8-quinolineselenolate and ruthenium 2-methyl-8-quinolineselenolate. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 230–236, February, 2009.     

Rh Inclusion in Sol-Gel SiO2. Effects of Rh Precursors on Metal Dispersion and SiO2-Rh Thermal Behavior

RhCl₃·nH₂O and [RhCl(C₂H₄)₂]₂ are used as precursors for the preparation of 1%Rh in sol-gel derived SiO₂. The gelling process of Si(OEt)₄ is carried out in the absence of solvent and under strong acid catalysis. The thermal behavior of Rh precursors, of SiO₂ gel and Rh-SiO₂ composites is independently studied by analysing organic species released at definite temperature intervals and concomitantly collecting infrared, XPS, TEM, XRD and porosity data. Results indicate that nanometric Rh particles may be obtained from [RhCl(C₂H₄)₂]₂, their dispersion being homogeneous, dense and stable up to 250°C, whereas RhCl₃·nH₂O affords less metallic dispersion with other crystalline Rh-species; in both cases, well-shaped Rh metal crystallites are obtained at 650°C. The different synthetic approaches used for the preparation of RhCl₃- and [RhCl(C₂H₄)₂]₂-derived samples, are invoked to account for the features of Rh dispersion obtained by mild temperature treatment. Moreover, the particular procedures for sol-gel SiO₂ synthesis are related to the high-temperature maintenance of great porosity and elevated specific surface area.     

光学纯SunPhos手性双膦烷的合成及其与丙烯酸甲酯的反应

SunPhos 双膦烷可以用氢化铝锂和三甲基氯硅烷还原相应的光学纯的双磷酸酯获得，该双膦烷和丙烯酸甲酯反应，可得膦烷被双烷基化的富电子膦配体。