Co催化剂超临界相FT合成反应的研究

进行了Ｃｏ／ＳｉＯ２催化剂在超临界介质存在下的Ｆ－Ｔ合成反应，考察了反应介质（气相，超临界相）对ＣＯ转化率及烃收率的影响，重点研究了α－烯烃（１－Ｃ１４）加入以催化剂反应性能及产物分布的影响，结果表明，引入的超临界介质可以将反应热及重南产物从催化床层及对移去，改善了过程的传热及传质效率，使ＣＯ的转化率和烃收率显著提高，反尖体系中加入的α－烯烃，借助于超临界介质的作用可以吸附到催化剂表面，并发生链增     

O／W微乳液催化苯乙烯聚合动力学研究

Ｏ／Ｗ微乳液催化苯乙烯聚合动力学研究１）郝京诚孙海英汪汉卿２）（中国科学院兰州化学物理研究所兰州７３００００）尤进茂（曲阜师范大学化学系曲阜２７３１６５）关键词微乳液催化苯乙烯聚合动力学分类号Ｏ６４３．１３微乳液作为聚合反应介质，催化单体聚合反应研究...     

单茂钛催化剂的丙烯无规聚合反应及其动力学研究

比较了不同钛化合物／甲基铝氧烷（ＭＡＯ）催化体系的丙烯无规聚合，催化活性次序为ＣｐＴｉ（ＯＲ）３＞ＣｐＴｉ（ＯＰｈ）３＞ＣｐＴｉＣｌ３＞Ｃｐ２ＴｉＣｌ２＞Ｔｉ（ＯＢｕ）４＞ＴｉＣｌ４＞Ｔｉ（ＯＢｕ）２Ｃｌ２，所得聚丙烯用沸庚烷抽提８ｈ，溶解９５％以上，可溶部分经１３Ｃ ＮＭＲ、ＷＡＤＸ、ＦＴＩＲ等分析证明为无规聚丙烯（ａＰＰ），是没有结晶性的弹性体．ＧＰＣ测出其分子量Ｍｗ＝８．０～１０．０×１０４，Ｍｗ／Ｍｎ≈２．０．探索了催化体系ＣｐＴｉ（Ｏ ｎ Ｐｒ）３／ＭＡＯ中钛的浓度、［Ａｌ］／［Ｔｉ］摩尔比，丙烯聚合压力，聚合温度和时间对丙烯聚合反应的影响．研究了该催化体系丙烯聚合反应动力学规律，表观聚合反应速率对催化剂浓度和单体压力（浓度）都呈一级反应关系，表观聚合速率常数ＫＰ＝２９２×１０５ｍｏｌ／Ｌ·ｈ（４０℃）．活化能ΔＥ＝－７．８８×１０３Ｊ·ｍｏｌ－１，碰撞因子Ａ＝１．４１×１０－４ｍｏｌ／Ｌ·ｈ．     

超临界CO2中苯甲酸与乙醇和二甲基亚砜的相互作用

在３５．０℃、１２．ＭＰａ条件下，用红外光谱法研究了超临ＣＯ２中苯甲苯与乙醇和二甲亚砜的相互作用。结果表明，在纯超临界ＣＯ２中，苯甲酸以单体和二了本的形式存在。     

新型高活性催化剂乙烯气相聚合的研究(Ⅵ)——锌化合物对催化剂及产物性能的影响

研究了新型高活性乙烯气相聚合催化剂ＴｉＣｌ４、Ｔｉ（ＯＢｕ）４／ＭｇＣｌ２、ＳｉＯ２和ＺｎＣｌ２／醇／ＡｌＲ３体系中ＺｎＣｌ２－ＡｌＥｔ３／ＳｉＯ２重量比和锌化合物含量对气相均聚合的影响，比较了２种不同催化剂Ｃａｔ＃Ａ和Ｃａｔ＃Ｂ的聚合反应动力学及性能差异．催化剂中锌化合物作为复合载体的重要组分，可显著改善产物分子量调节效果．通过比表面积、ＳＥＭ、ＤＳＣ以及ＦＴＩＲ对催化剂和聚合物的形态、结构及性能进行了分析和表征．结果表明，均聚产物与采用ＭｇＣｌ２作载体的催化剂制备的产物相比，支化度较高，结晶度较低，熔融峰较宽．发现Ｃａｔ＃Ｂ制得的均聚产物具有新颖的熔融双峰．     

墨红花超临界二氧化碳香味萃取成分的色谱－质谱法测定

 由墨红花提取的精油或油树脂是优质的天然香料，被广泛用于化妆品和食品工业。超临界ＣＯ２萃取墨红花精油，既可保持很好的香气，又能克服传统的有机溶剂萃取时有残余溶剂的缺点。用气相色谱－质谱联用法对超临界ＣＯ２萃取物与石油醚萃取物中的组成进行了分析比较。色谱条件为：ＯＶ－１０１固定相，氦气，０．２ｍｍ×５０ｍ石英毛细管柱，柱温７０℃２ｍｉｎ，然后以５℃／ｍｉｎ程序升温至２５０℃。超临界萃取条件为５０℃，２１ＭＰａ，ＣＯ２流量为１０ｍＬ。     

墨红花超临界二氧化碳香味萃取成分的色谱－质谱法测定

由墨红花提取的精油或油树脂是优质的天然香料，被广泛用于化妆品和食品工业。超临界ＣＯ２萃取墨红花精油，既可保持很好的香气，又能克服传统的有机溶剂萃取时有残余溶剂的缺点。用气相色谱－质谱联用法对超临界ＣＯ２萃取物与石油醚萃取物中的组成进行了分析比较。色谱条件为：ＯＶ－１０１固定相，氦气，０．２ｍｍ×５０ｍ石英毛细管柱，柱温７０℃２ｍｉｎ，然后以５℃／ｍｉｎ程序升温至２５０℃。超临界萃取条件为５０℃，２１ＭＰａ，ＣＯ２流量为１０ｍＬ。发现超临界萃取物中的成分包括了石油醚萃取物中的多数主要香味成分，但对香味影响较小的、分子量较大的烷烃和烯烃的含量较少。超临界二氧化碳萃取物的香气与鲜花相近。     

用超临界CO_2进行聚合

用超临界ＣＯ_２进行聚合美国北Ｃａｒｏｌｉｎａ大学Ｊ．Ｍ．Ｄｅｓｉｍｏｎｅ等提出用超临界二氧化碳作为分散介质，用一种聚合物稳定剂和自由基启动剂以代替常规的用水和有机分散介质的方法。在甲基丙烯酸甲酯聚合中，他们所用的稳定剂由两个片段构成，一段是类似聚丙...     

超临界CO2的均相催化加氢

超临界ＣＯ_２的均相催化加氢以ＣＯ２作为起始物来合成有机化合物是人们长期以来追求的目标。通过ＣＯ２的加氢作用可以形成甲酸和别的有机化合物。但这种途径还存在不少困难。最近，日本的Ｙａｃｈｉｇｕｓａ博士等人报道，运用Ｒｕ的金属有机化合物作催化剂，让ＣＯ２?..     

离线超临界流体萃取和气相色谱-红外-质谱联用测定水中有机污染物

 利用吸附剂ＧＤＸ－３０１对黄河水中的有机污染物富集并以超临界ＣＯ２脱附后，通过气相色谱、色谱－红外－质谱联用技术对各目标分析物逐一定性，并比较了超临界ＣＯ２萃取和溶剂洗脱的结果。实验表明，在２０ＭＰａ，６０℃，４０ｍｉｎ条件下进行超临界ＣＯ２萃取时的萃取效率和溶剂萃取效率相当或略高。     

双官能度引发剂引发苯乙烯聚合微观动力学

采用 2 ,5 二甲基 2 ,5 二己酰基过氧化己烷 (DMDEHPH)为引发剂 ,在 5 5～ 80℃下引发苯乙烯聚合 .通过研究影响聚合速率的各种因素 ,得出了聚合速率对单体浓度和引发剂浓度的级数分别为 1 0和 0 5次、聚合活化能为 92 0kJ mol、引发效率为 0 5 5± 0 0 3.温度一定 ,引发效率随引发剂浓度的增加而减小 .求得 6 0和70℃下DMDEHPH向引发剂的链转移常数分别为 0 0 37和 0 0 4 8、向单体的链转移常数分别为 0 5 9× 10 - 4和0 75× 10 - 4.     

Polymerization of vinyl chloride at reduced monomer accessibility. II. Polymerization at subsaturation pressure with emulsion PVC as seed

Vinyl chloride was polymerized at 59–92% of saturation pressure in a water-suspended system at 45–65°C with an emulsion poly(vinyl chloride) (PVC) latex as a seed. A water-soluble initiator was used in various concentrations. The monomer was continuously charged as vapor from a storage vessel kept at lower temperature. Characterization included determination of molecular-weight distribution and degree of long-chain branching by gel permeation chromatography (GPC) and viscometry, thermal dehydrochlorination, and microscopy. The polymerization rate decreases with decreasing pressure but is reasonable even at the lowest pressure. The molecular weight decreases with decreasing pressure and increasing initiator concentration and also with increasing polymerization temperature, if the initiator concentrations are chosen to give a constant initiator radical concentration. The degree of long-chain branching increases with increasing initiator concentration and decreasing monomer pressure but is unaffected by the polymerization temperature, if the initiator radical concentration is kept constant. The thermal stability decreases with decreasing M _n, while the degree of long-chain branching has only a minor influence. The most important factor in the system influencing the molecular parameter is the monomer accessibility.     

无规聚丙烯接枝甲基丙烯酸的合成

采用溶液聚合的方法将无规聚丙烯 (APP)与甲基丙烯酸 (MAA)接枝共聚制得接枝共聚物APP -g -MAA。讨论了反应温度、反应时间、引发剂BPO浓度、单体MAA浓度对接枝率的影响。结果表明 :当聚合反应温度低于是 12 0℃时 ,接枝率随温度升高而降低。延长反应时间有利于提高接枝率。最适宜的引发剂浓度为 1% ,MAA/APP配比为 0 .2 5/1。利用红外光谱证实了接枝物APP-g -MAA的存在。     

Suspended Emulsion Copolymerization of Acrylonitrile with Methyl Acrylate: Effects of Reaction Parameters on the Polymerization

Acrylonitrile/methyl acrylate copolymers were synthesized by suspended emulsion polymerization with water as dispersed phase and monomers as continuous phase, potassium peroxydisulphate (KPS) as initiator, Span-80 as emulsifier, and poly(vinyl alcohol) (PVA) as suspending agent. Effects of reaction parameters such as water/monomer mass ratio, concentration of initiator, polymerization temperature and agitation rate on polymerization conversion and the particle size distribution of acrylonitrile/methyl acrylate copolymers were studied. It was found that polymerization conversion increased with an increase of water/monomer mass ratio, concentration of initiator and polymerization temperature, while the agitation rate had no significant effect on the polymerization conversion. Particle size distribution became narrower with an increase of water/monomer mass ratio and agitation rate. Under the same initiator concentration and polymerization temperature, particle size distribution became wider along with polymerization time. The differential scanning calorimetry (DSC) results indicated that the peak temperature of the copolymers decreased with increasing MA content.     

Precipitation polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

We report the successful precipitation polymerization of 2‐hydroxyethyl methacrylate (HEMA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 15 to 27 MPa utilizing 2, 2′‐azobisisobutyronitrile (AIBN) as a free radical initiator. The effects of the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time were investigated. Analyses by scanning electron microscopy (SEM) indicated that in all reaction conditions, polymerization in the absence of stabilizer led to the formation of large aggregates of partially coalesced particles, with diameters of approximate 1–10 µm. Analyses by gel permeation chromatography (GPC) indicated that for the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time studied there are appreciable effect on product molecular weight. Copyright © 2011 John Wiley & Sons, Ltd.     

Vinyl Polymerization Initiated by Metal Chelates. III. Polymerization of Methyl Methacrylate Initiated by Vanadium(IV) Acetylacetonate Chelates

The polymerization of methyl methacrylate initiated by the vanadium acetylacetonate complex was investigated under a nitrogen atmosphere at 50°C. The effect of concentration of monomer, complex, acid, dioxane, inhibitor, and the effect of temperature on the rate of polymerization were studied. The rate of polymerization was found to increase upon increasing the concentrations of the monomer, the initiator, and the acid. The overall activation energy has been computed from the Arrhenius plot and a suitable kinetic scheme has been proposed.     

分散聚合制备粒度均匀的聚甲基丙烯酸环氧丙酯微球

文中描述了粒度均匀的聚甲基丙烯酸环氧丙酯微球的制备,所采用的是分散聚合方法,系统地研究了溶剂体系、单体浓度、引发剂类型与浓度、稳定剂用量、反应温度等各种聚合参数,对聚合产物粒度及其分散性的影响．在优化反应条件的基础上,制备出了微米级（１～８μｍ）粒度均匀性基本呈现单分散的聚合物微球．     

四氟乙烯与异丙醇的调节聚合研究

采用气相色谱法,研究了反应温度、引发剂浓度、四氟乙烯单体压力对四氟乙烯与异丙醇调聚反应产物重量分布的影响。实验结果表明,随温度升高,n=1的产物含量增加,n>1的各产物含量下降;单体压力的影响则相反;引发剂浓度的影响不明显。反应初期n=1产物生成速率较快,反应中、后期有利于m≥3产物的生成。     

UV光引发的丙烯酰胺反相乳液聚合

报道了不透明丙烯酰胺反相乳液体系的UV光引发聚合新方法 .使用普通中压汞灯并辅以适当搅拌 ,UV光引发丙烯酰胺 水 煤油 Span80 +OP 10反相乳液聚合可在 2 0min左右完成 ,所得聚合物分子量达千万 ;聚合过程中不存在恒速期 ,扫描电镜未观察到聚合前后乳胶粒径有数量级的变化 ,表明聚合反应以单体液滴成核为主 .此外 ,考察了光引发剂类型及浓度、单体浓度、乳化剂用量、反应温度等对聚合反应的影响 ,结果表明不同光引发剂的引发活性为Irgacure 2 95 9>(ITX +EDAB) >BDK ,引发剂浓度增加 ,反应速度先增加而后降低 ,存在一最大值 ;单体浓度增加 ,反应速度加快 ,聚合物分子量提高 ;乳化剂用量增加 ,反应速度加快而分子量变化不明显 ;聚合表观活化能为 13 34kJ mol.     

Frontal copolymerization synthesis and property characterization of starch-graft-poly(acrylic acid) hydrogels

Recently, a considerable amount of research has centered on uniquely structured polymers synthesized through self-propagating frontal polymerization. The obtained polymer materials have better features than those obtained by using the classical batch route. The additional advantages are short reaction times and low cost. This work describes the first frontal polymerization synthesis of a graft copolymer superabsorbent hydrogel of acrylic acid onto starch at high monomer and initiator concentration. The effects of varying the relative amounts of the reaction components on the most relevant parameters relating to frontal polymerization were explored. The front velocity dependence on initiator concentration could be fit to a power function. The temperature profiles were found to be very sharp with a maximum temperature below 150 degrees C, which was responsible for high monomer conversion. The ultimate properties of the product appear to depend on the polymerization front velocity and the temperature. The high-temperature and rapid temperature increase at the polymerization front led to products with interconnected porous structures caused by the evaporation of water. So, a fast-swelling, highly absorbing hydrogel with respect to batch polymerization was obtained.