51VNMR研究磷钼钒系杂多酸的热稳定性

用NMR及IR、TG-DTA等手段研究具有Keggin结构的磷钼钒系杂多酸在空气中的热稳定性。实验结果表明:合成的杂多酸在各个Keggin单元中具有不同的钒含量。样品的热稳定性与其钒含量有关.随着钒含量的增加,keggin结构的热稳定性逐渐降低,但H_4PMo_(11)V_1O_(40)具有比H_3PMo_(12)O_(40)还要高的热稳定性。由于钒的取代,钼钒磷酸的热分解过程不同于钼磷酸。失去结构水使Keggin结构遭到破坏,但在室温下与水重新作用可使钼钒磷酸的Keggin结构恢复。     

介孔硅担载磷钨杂多酸催化剂的制备及其对环戊烯氧化反应的催化性能

采用离子交换法将Keggin型12-磷钨杂多酸负载到表面胺基化的介孔SBA-15分子筛上,并利用X射线衍射、N2吸附-脱附、傅里叶变换红外光谱、X射线光电子能谱和热重分析等手段对催化剂进行了表征.结果表明,所制备催化剂具有SBA-15分子筛的有序六方孔道结构,负载后的磷钨杂多酸的Keggin结构未遭到破坏,所制备催化剂...     

Keggin结构多金属含氧酸盐的热解性质

用变温XRD、变温IR以及TG-DTA、溶解性实验等方法研究了具有Keggin结构的18种化合物YmHnXM12O40(X=P,Si,Ge;M=W,Mo;Y=NH4+,K+,Cu2+,m和n为抗衡离子数,YmHnXM12)的热解性质.得到了较为准确的热分解温度,探讨了其热分解过程,对其主要的热分解产物作了初步鉴定.对多金属含氧酸盐热分解的判断方法进行了系统研究,提出了新的见解.讨论了影响多金属含氧酸盐热解性质的一些主要因素及其变化规律.     

硅钼钒和硅钨钒杂多酸的制备及其在苯直接羟基化制苯酚中的活性研究

本文采用分步反应、分步酸化法制备了硅钼钒和硅钨钒杂多酸,用等离子原子发射光谱、热重分析、红外、紫外、粉末X射线对制备的化合物进行了表征。结果表明,制备所得化合物为Keggin结构的杂多酸。同时,本文还用该杂多酸作催化剂,研究了其对由苯直接氧化羟基化合成苯酚的催化活性,结果显示,在本文条件下,用所合成的杂多酸作催化剂,可获得17.2%苯酚收率和高于90%的苯酚选择性。     

磷钼钨杂多酸还原态的电子自旋共振研究

合成了一个系列具有Keggin结构的磷钼钨杂多酸H~3PMo~1~2~-~nW~nO~4~0(n=0,3,6,9,11,12).用电子自旋共振(ESR)方法研究了这些杂多酸的还原性.结果表明,在还原态的杂多酸中,除了因失去桥氧产生的Mo^5^+信号A(其g~⊥^A=1.952, g~∥^A=1.852)外,钨取代后产生另一Mo^5^+信号B,其g~⊥^B=1.923,g~∥^B=1.877.该信号被认为是由于杂多酸中钼的端氧还原所致. 由此提出钨的取代影响了杂多酸的氧化还原性,即桥氧的稳定性相对增强,端氧的稳定性相对减弱     

Zn取代的磷钨酸季铵盐无溶剂氧化苯甲醇合成苯甲醛

合成了一系列过渡金属Zn取代的Keggin型磷钨杂多酸的季铵盐,采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)等方法表征了杂多化合物的结构.并将其用于苯甲醇无溶剂氧化合成苯甲醛的反应,考察了催化剂种类、反应条件对苯甲醇氧化的影响.实验结果表明,在无任何溶剂的情况下,Zn取代的Keggin型磷钨四丁基铵盐具有最佳的催化活性,反应时间仅为30 min,苯甲醇的转化率可以达到95.6%,苯甲醛的选择性达到了96.4%.在对杂多酸季铵盐结构的研究基础上,对可能的反应机理进行了初步探讨.     

Keggin型多元杂多酸催化合成苯乙酮环乙二缩酮

合成了一系列具有Keggin结构的P-V-Mo-W四元杂多酸H3+xPVxMoyW12-x-yO40.nH2O(其中,x=1,2和3),采用傅里叶变换红外光谱和X射线衍射等方法表征了杂多酸的结构;以磷钒钼钨杂多酸为催化剂合成苯乙酮环乙二缩酮.考察了催化剂的种类、醇酮摩尔比、带水剂的种类和反应条件(催化剂用量、带水剂用量、反应温度、反应时间)对苯乙酮乙二醇缩酮反应的影响.在优化条件下,即苯乙酮0.1 mol、乙二醇0.14 mol、催化剂H6PV3MoW8O400.4 mmol、在110℃反应6 h、带水剂环己烷15 mL,苯乙酮的转化率达到84.1%、苯乙酮环乙二缩酮的选择性达到99.4%.     

酸功能化-温控型三元杂多酸离子液体的合成、表征及其酯催化性能

采用酸化-乙醚萃取法制备了不同钒取代数目的 Keggin结构的磷钨钒杂多酸,并进一步通过离子交换法合成了磺酸功能化的杂多酸离子液体催化剂,采用核磁、元素分析、红外、紫外、X射线衍射、热重-差示扫描、电位滴定等分析手段对所得样品进行了表征,考察了所得样品对氯乙酸和正戊醇的酯化反应性能和重复使用性能。结果表明,所制备的杂多酸离子液体是一种具有温度响应特性的无定型结构化合物,仍保留Keggin结构和较高的酸强度,该催化剂在反应温度下与反应物形成一相,而反应结束温度降低后,催化剂和产物又形成两相,通过简单的倾倒法就可以快速分离催化剂和反应产物。与杂多酸以及未磺酸化的杂多酸离子液体相比,磺酸功能化的杂多酸离子液体具有更高的酯催化活性。在优化的反应条件下,[PyPS]4PW11VO40(PyPS为1-(3-磺酸基)丙基吡啶)对氯乙酸的转化率可达到97.6%,重复使用4次后转化率为91.9%,而催化剂的结构未有明显变化。     

钨钼杂多酸及其盐与二甲基亚砜加合物的制备和性质研究

在乙腈和水的混合溶剂中制备了9种钨钼杂多酸和杂多酸盐的二甲基亚砜加合物。研究结果表明,加合物中杂阴离子的Keggin结构基本不变。配体DMSO以S=O键上的氧作为配位原子,它不直接与杂阴离子骨架结构发生配位作用,而是与杂多酸中的质子氢或杂多酸盐中的金属阳离子以氢键或配位键相配位,生成的质子(钅羊)离子和金属配离子再通过离子缔合键与杂阴离子相结合,形成杂多酸或杂多酸盐加合物。     

29Si NMR谱对[SiW11(CH3SiOSiCH3)O39]4-结构的验证

Keggin结构杂多酸的有机衍生物[SiW_(11)(RSiOSiR)O_(39)]~(4-)(R=C_2H_5、C_6H_5、NC(CH_2)_3、C_3H_7)已有报道,根据其红外光谱中出现1040cm~(-1)(Si-O-Si的振动峰),Knoth提出了图1的结构。从中可以看出RSiOSiR基占据了Keggin结构杂多酸[SiW_(11)O_(39)]~(8-)的空缺齿顶位置。当然处于齿顶位置的硅原子和中心位置的硅原子的化学环境显然是不同的,所以可用~(29)Si NMR来鉴定这两种硅原子,并推测其结构。     

Esterification of phthalic anhydride with 1-butanol and 2-ethylhexanol catalyzed by heteropolyacids

Esterification of phthalic anhydride with 2-ethylhexanol and 1-butanol and ester decomposition of dioctyl phthalate (DOP) in presence of Keggin; H₃PW₁₂O₄₀, H₄SiW₁₂O₄₀, H₄SiMo₁₂O₄₀, Wells–Dawson; H₆P₂W₁₈O₆₂, H₆P₂W₁₇MoO₆₂ and Preyssler; H₁₄[NaP₅W₂₉MoO₁₁₀], H₁₄[NaP₅W₃₀O₁₁₀], type heteropolyacids have been investigated. The heteropolyacids with Preyssler and Wells–Dawson structures and their molybdenum substituted derivatives show higher activity in esterification and ester decomposition reactions than Keggin type heteropolyacids. A complete conversion of phthalic anhydride to dioctyl phthalate and dibutyl phthalate are achieved in 2 h in presence of molybdenum substituted Preyssler heteropolyacid. In the decomposition of dioctyl phthalate in the presence of Preyssler heteropolyacid, 2-ethylhexene is formed in quantitative yield.     

Lacunar Keggin Heteropolyacid Salts: Soluble,Solid and Solid-Supported Catalysts

Polyoxometalates are an important class of environmentally friendly catalysts. The Keggin heteropolyacids containing tungsten or molybdenum addenda atoms have received great attention because they have attractive acid and redox properties, which may be easily tunable through changes in their composition and structure. The replacement of their protons by large radium cations makes insoluble the Keggin heteropolyacids and increases their surface area. On the other hand, the removal of tungsten or molybdenum atoms from the Keggin heteropolyanion generates vacancies, which can activate different organic substrates. Therefore, solid lacunar heteropolyacid salts are potentially active catalysts and selective in a plethora of reactions. These catalysts are used either in homo- or heterogeneous conditions. In this review, we wish would highlight recent advances achieved in the chemistry of lacunar Keggin heteropolyacids. We describe their use as solid, soluble or solid-supported catalysts in reactions of oxidation of alcohols and olefins, oxidative desulfurization and acid-catalyzed reactions such as acetalization, esterification, and transesterification.     

Studies on the Non-Isothermal Decomposition of H3PMo12O40·xH2O and H4PVMo11O40·yH2O

This paper reports a comparative study of the non-isothermal decompositions of the heteropolyacids HPM and HPVM, with structures consisting of Keggin units (KUs). Non-isothermal analysis at low heating rates demonstrated the existence of 4 crystal hydrate species, depending on the temperature. The stability domains of the anhydrous forms of HPM and HPVM were found to be 150–380°C, respectively. Processing of the TG curves obtained at different heating rates by the Ozawa method revealed that the decomposition of anhydrous HPM takes place according to a unitary mechanism, whilst for anhydrous HPVM two mechanisms are observed. Thus, the first part of the constitution water is lost simultaneously with the departure of vanadium from the KU as VO²⁺, while the second part is lost at higher temperatures as in the case HPM. This revised version was published online in August 2006 with corrections to the Cover Date.     

Investigation of structure and thermal stability of surfactant-modified Al-pillared montmorillonite

For combining the properties of organoclays and pillared clays, inorganic–organic clays have attracted much attention in recent years. In this study, Al Keggin cation pillared montmorillonites (Al-Mts) were first prepared and parts of Al-Mts were calcined at different temperatures (C-Al-Mts). The inorganic–organic montmorillonites were synthesized by intercalating Al-Mts and C-Al-Mts with the cationic surfactant, hexadecyltrimethyl ammonium bromide (HDTMAB). The products were characterized by X-ray diffraction, X-ray fluorescence, and simultaneous thermogravimetric analysis. For HDTMAB-modified uncalcined Al Keggin cation pillared montmorillonites (H-Al-Mts), the basal spacing increased with the increment of surfactant loading level, but the Al content of H-Al-Mts decreased simultaneously, indicating that the intercalated surfactant replaced some Al Keggin cations in the interlayer space. However, in the case of C-Al-Mts, the interlayer spaces could not be further expanded after surfactant modification, implying that the neighboring montmorillonite layers were “locked” by the aluminum pillars which were formed by dehydroxylation of Al Keggin cation pillars during thermal treatment. The thermal stability of HDTMAB-modified C-Al-Mts (H-C-Al-Mts) was much better than that of H-Al-Mts. The major mass loss of H-C-Al-Mts occurred at ca. 410 °C, corresponding to decomposition of intercalated surfactant cations. In contrast, H-Al-Mts displayed two mass loss temperatures at ca. 270 and 410 °C, corresponding to the evaporation of surfactant molecules and the decomposition of surfactant cations in the interlayer space, respectively.     

Keggin杂多酸负载型催化剂研究及在有机合成中的应用

评述了负载型杂多酸Keggin结构催化剂的制备、表征及其表面作用机理, 阐述了在非均相催化酯化反应、Friedel-Crafts烷基化和酰基化反应、选择氧化、不对称催化反应、异构化反应、缩合反应、裂解反应、水合反应、脱水反应、水解反应、重排反应、Diels-Alder反应及醚化反应等作为探针反应的催化性能, 总结了重排反应、醇氧化等不同类型催化反应的反应机理和催化剂失活的主要原因以及影响负载型催化剂水热稳定性能的因素, 指出了负载型杂多酸Keggin结构催化剂研究中有待解决的问题及今后的发展方向..     

Synthesis of 3-(aryl)-2-thioxo-2,3-dihydroquinazolin-4(1H)-one derivatives using heteropolyacids as green,heterogeneous and recyclable catalysts

Reaction of isatoic anhydride with aniline derivatives gave 2-amino-N-(aryl)benzamides.The latters reacted with phenyli-sothiocyanate in the presence of heteropolyacids in various solvents which afforded 3-(aryl)-2-thioxo-2,3-dihydroquinazolin- 4(1H)-one derivatives.The effects of various heteropolyacids including Preyssler and Keggin on the yields and reaction times have been investigated.     

d三空位杂多阴离子XW~9O^1^0^-~3~4(X=Si,Ge)取代衍生物的 结构类型及其 ^1^8^3W NMR谱的特征模式

三空位杂多阴离子SiW~9和GeW~9与金属离子反应可分别生成Keggin三取代型、夹心型及双聚型杂多阴离子.总结了三种结构类型取代衍生物的^1^8^3WNMR谱化学位移的特征模式。     

Keggin type heteropolyacids-catalyzed synthesis of quinoxaline derivatives in water

Keggin type heteropolyacids was found to be an efficient and reusable catalyst for the synthesis of biologically active quinoxaline derivatives from the condensation of 1,2-diamine with 1,2-dicarbonyl compounds in excellent yields in water.This method provides a new and efficient protocol in terms of small quantity of catalyst,a wide scope of substrates,and simple work-up procedure.