Mild and facile procedure for clay-catalyzed acetonide protection and deprotection of N(Boc)-amino alcohols and protection of 1,2-diols

The application of clay as a catalyst for acetonide protection of N(Boc)-amino alcohols and 1,2-diols to obtain good to excellent yields of the acetonide derivatives is described. Acetonide deprotection to obtain the parent amino alcohol was carried out using a similar catalyst in the presence of methanol as solvent. The reaction takes place at room temperature within 2 h to give the parent amino alcohol in quantitative yield keeping the N(Boc) group intact.     

Enantiopure 1-phosphanorbornadiene-2-carboxaldehydes

The reaction of phenylpropargyl aldehyde diethyl acetal with 1-phenyl-3,4-dimethylphosphole at 140°C or 1,2,5-triphenylphosphole at 170°C leads, after deprotection, to the corresponding 1-phosphanorbornadiene-2-carboxaldehydes 3 and 4 in 88 and 45% yields, respectively. The resolution of 3 and 4 was carried out by chromatography or fractional crystallization of the acetals derived from (S,S)-1,2-diphenylethane-1,2-diol. The absolute configurations were established by X-ray analysis of one of these acetals or of a 2-bromomethyl derivative.     

NMR determination of the absolute configuration of chiral 1,2- and 1,3-diols

Each of the chiral 1,2- and 1,3-diols examined was derivatized exclusively to a single diastereomeric acetal by the use of a new axially chiral reagent, 2′-methoxy-1,1′-binaphthalene-8-carbaldehyde (MBC). The absolute configuration of the original 1,2- and 1,3-diols was determined by the NOE correlation between the proton signals of the reagent moiety and those of the diol moiety in the acetals.     

Serendipitous synthesis of 3-hydroxy tetrahydrofurans from tin catalyzed sulfonylation of acyclic 1,2,4-triols

The reaction of syn-1,2,4-triols under sulfonylation conditions catalyzed by Bu₂SnO (5 mol %) results in cyclization and the formation of 3-hydroxy tetrahydrofurans (56-85%) while the anti-1,2,4-triols react to give C1-O-sulfonyl derivatives in good yields (66-83%) and the cyclization product in poor yield (5-12%). A mechanism that justifies these observations is proposed to occur via the tosylation of the primary hydroxyl followed by an intramolecular tin acetal rearrangement to a 1,3-stannylene which then undergoes a 5-exo-tet-cyclization. The difference in rates of cyclization reactivity is due to the energetically more stable tin acetals of syn-1,3-diols compared to those of anti-1,3-diols.     

Selective mono-fluorination of diols via a cyclic acetal of N,N-diethyl-4-methoxybenzamide

Selective mono-fluorination of 1,2- and 1,3-diols was achieved using N,N-diethyl-4-methoxybenzamide diethyl acetal and Et₃N-3HF. The reaction proceeds through a cyclic acetal of the benzamide, and only one hydroxy group was fluorinated and another one was acylated.     

A two-step synthesis of allylic syn 1,3-diols via an intramolecular oxa-Michael reaction followed by a modified Julia olefination

A two-step process for the synthesis of allylic syn 1,3-diols is developed. An intramolecular oxa-Michael reaction onto vinyl heteroaromatic sulfones allows the diastereoselective formation of 1-sulfonyl 2,4-diols protected as benzylidene acetals. These sulfones are then engaged in a modified Julia olefination to furnish the olefins contiguous to the benzylidene acetal ring with good E/Z selectivity.     

Stripping off water at ambient temperature: direct atom-efficient acetal formation between aldehydes and diols catalyzed by water-tolerant and recoverable vanadyl triflate

[reaction: see text]. Aromatic aldehydes can be readily protected as acetals with 1,2- and 1,3-diols by using vanadyl triflate as a catalyst in CH(3)CN at ambient temperature. Carbohydrate-based 1,2- and 1,3-diols can similarly be protected in good to excellent yields. The catalyst can be readily recovered from the aqueous layer. In combination with vanadyl triflate-catalyzed sequential regioselective, reductive acetal opening and chemoselective acylations, the title method allows for differential functionalization of all four hydroxyl units in a given glucopyranoside.     

C(2)-Symmetric bis-sulfoxide: A novel chiral auxiliary for asymmetric desymmetrization of cyclic meso-1,2-diols

A new heterocyclic compound, C(2)-symmetric bis-sulfoxide 1, has been found to be an efficient chiral auxiliary for asymmetric desymmetrization of cyclic meso-1,2-diols via diastereoselective acetal fission. Both (R,R)- and (S,S)-1 are readily synthesized with high optical purity via asymmetric oxidation of 1, 5-benzodithiepan-3-one (2). After acetalization of meso-1,2-diols 6a-e and a mono-TMS ether 6f with this chiral auxiliary 1, the resulting acetals 7a-f were subjected to base-promoted acetal fission upon treatment with potassium hexamethyldisilazide (KHMDS) followed by acetylation or benzylation to give the desymmetrized diol derivatives 8a-f with high diastereoselectivity. The chiral auxiliary 1 is readily removed by acid-promoted hydrolysis and can be recovered without a loss in enantiomeric excess.     

Thiol-catalysed radical-chain redox rearrangement reactions of benzylidene acetals derived from terpenoid diols

The thiol-catalysed radical-chain redox rearrangement of cyclic benzylidene acetals derived from 1,2- and 1,3-diols of terpene origin has been investigated from both synthetic and mechanistic standpoints. The redox rearrangement was carried out either at ca. 70 degrees C (using Bu(t)ON=NOBu(t) as initiator) or at ca. 130 degrees C (using Bu(t)OOBu(t) as initiator) in the presence of triisopropylsilanethiol or methyl thioglycolate as catalyst; the silanethiol was usually more effective. This general reaction affords the benzoate ester of the monodeoxygenated diol, unless rearrangement of intermediate carbon-centred radicals takes place prior to final trapping by the thiol to give the product, in which case structurally rearranged esters are obtained. For the benzylidene acetals of 1,2-diols prepared by vicinal cis-dihydroxylation of 2-carene, alpha-pinene or beta-pinene, intermediate cyclopropylcarbinyl or cyclobutylcarbinyl radicals are involved and ring opening of these leads ultimately to unsaturated monocyclic benzoates. 1,2-Migration of the benzoate group in the intermediate beta-benzoyloxyalkyl radical sometimes also competes with thiol trapping during the redox rearrangement of benzylidene acetals derived from 1,2-diols. Redox rearrangement of the benzylidene acetal from carane-3,4-diol, obtained by cis-dihydroxylation of 3-carene, does not involve intermediate cyclopropylcarbinyl radicals and leads to benzoate ester in which the bicyclic carane skeleton is retained. The inefficient redox rearrangement of the relatively rigid benzylidene acetal from exo,exo-norbornane-2,3-diol is attributed to comparatively slow chain-propagating beta-scission of the intermediate 2-phenyl-1,3-dioxolan-2-yl radical, probably caused by the development of adverse angle strain in the transition state for this cleavage. Similar angle strain effects are thought to influence the regioselectivities of redox rearrangement of bicyclic [4.4.0]benzylidene acetals resulting from selected 1,3-diols, themselves prepared by reduction of aldol adducts derived from reactions of aldehydes with the kinetic lithium enolates obtained from menthone and from isomenthone.     

Studies on DMDO-mediated benzylidene acetal oxidation

We have shown that dimethyldioxirane (DMDO) can be used to effect an oxidative partial deprotection of benzylidene acetals derived from both 1,2- and 1,3-diols to afford hydroxy benzoate products. A wide range of functional groups are tolerated, and good to excellent yields are usually observed. The reactions are easy to perform and produce little waste other than acetone.     

Indium(III) triflate catalyzed tandem azidation/1,3-dipolar cycloaddition reaction of ω,ω-dialkoxyalkyne derivatives with trimethylsilyl azide

The azidation reaction of dialkyl acetal derivatives with trimethylsilyl azide (TMSN₃) was efficiently catalyzed by 1-5 mol % of In(OTf)₃. The major product differed depending on the substrate structure and molar ratio of TMSN₃, that is, aliphatic acetals provided α-azido ether derivatives, while aromatic acetal (benzaldehyde dimethyl acetal) provided gem-diazide, respectively. Furthermore, novel tandem azidation/1,3-dipolar cycloaddition reaction using alkynyl acetal derivatives gave bicyclic triazolo-heterocyclic compounds, recognized as chemically modified aza-sugar analogues, in high yields under mild conditions.     

Selective cleavage of acetals with ZnBr2 in dichloromethane

A selective cleavage of acetals of 1,2- and 1,3-diols has been achieved under mild conditions using ZnBr₂ in dichloromethane at room temperature. Acetal types cleavable by this procedure include benzylidene, isopropylidene and cyclohexylidene acetals. This method is compatible with several other types of hydroxyl protecting groups such as Bn, Bz, TBDPS, TIPS and TBDMS.     

Iron(III) tosylate-catalyzed deprotection of aromatic acetals in water

The deprotection of aromatic as well as conjugated acetals and ketals in water is catalyzed by iron(III) tosylate (1.0-5.0 mol %). Iron(III) tosylate is an inexpensive and readily available catalyst. The use of water, the most environmentally benign solvent, makes this procedure especially attractive for acetal deprotection.     

Synthesis and some properties of cyclic acetals of malonaldehyde

The Lewis acid-catalyzed addition of cyclic orthoformates to vinyl ethyl ether, which leads to the formation of malonaldehyde acetals, was studied. It is shown that of the linear-cyclic malonaldehyde acetals, 2-(2,2-diethoxyethyl)- and 5,5-dimethyl-2-(2,2-diethoxyethyl)-1,3-dioxanes are stable. The transacetalization of 1,1,3,3-tetraethoxypropane with 1,2- and 1,3-diols, which leads to the formation of cyclic malonaldehyde acetals, was studied. The physicochemical constants of the acetals were determined, and their ¹H and ¹³C NMR spectra are described.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 459–463, April, 1983.     

Reaction of acetylated carbohydrates with trimethylaluminum: concise synthesis of 1,2-O-isopropylidene d-ribofuranose

Treatment of β-d-ribose tetraacetate with trimethylaluminum gives α-3,5-O-acetyl-1,2-O-isopropylidene-d-ribofuranoside in excellent yield. This reaction allows for efficient and high-yielding installation of the 1,2-isopropylidene acetal (acetonide), which is difficult to prepare using more traditional acid-catalyzed methods. The reaction of trimethylaluminum with other per-acetylated carbohydrates is also described.     

Asymmetric Dihydroxylations of β-Substituted N-(α,β-Enoyl)bornane-10,2-sultams

Pure (E)- or (Z)-enoylsultams 2 were Oxidized with OsO₄/N-Methylmorpholine N-oxide in a stereospecific and highly π-face-selective manner. Acetalization of the resulting 1,2-diols furnished, after purification, the stable, crystalline acetals 6 in >99% d.e. and in 63–74% overall yield from 2 . Reductive or hydrolytic cleavage of 6 gave enantiomerically pure alcohols 8 or carboxylic acids 9 with recovery of the sultan auxiliary 1 .     

Mild and efficient method for the cleavage of benzylidene acetals using HClO4-SiO2 and direct conversion of acetals to acetates

HClO₄-SiO₂ has been used successfully for the deprotection of benzylidene acetals and the direct conversion of benzylidene acetals to the corresponding di-O-acetates. The reactions are very fast and yields are excellent.     

Asymmetric Desymmetrization of Saturated and Unsaturated meso-1,2-Diols

An asymmetric desymmetrization of saturated and unsaturated cyclic and acyclic meso-1,2-diols has been developed from the ene acetals, prepared from the norbornene carboxyaldehyde and meso-1,2-diols. The intramolecular haloetherification of the ene acetals as a key step afforded 8-membered acetals in a stereoselective manner just by the reaction of norbornene olefin even when the ene acetals from unsaturated meso-1,2-diols having olefins in the same molecule were used. Subsequent reductive elimination, followed by protecting the hydroxy group and transacetalization, gave optically active 1,2-diol derivatives and the starting ene acetals in good yields.     

Ring opening during the cationic polymerization of 2-methylene-1,3-dioxepane: Cyclic ketene acetal initiation with sulfuric acid supported on carbon

The stable cyclic ketene acetal, 2-methylene-1,3-dioxepane, 7, has been polymerized cationically in pentane, CH₂Cl₂ and THF at 25°C to form a polymer which is composed of both ring-opened (40–50%) and ring-retained (50–60%) structures. Initiation was catalyzed by using H₂SO₄-supported on activated carbon black. This unique outcome differs significantly from the cationic polymerization of several other five- and six-membered ring cyclic ketene acetals which gave 100% 1,2-vinylpolymerization under these conditions. As the polymerization temperature increased in cationic polymerization of 7 the ring-opened content increased and the molecular weight of the polymers decreased in such solvents as cyclohexane, 1,2-dichloroethane, dimethoxyethane, and bis-(2-methoxyethyl) ether. The mechanism of this polymerization is discussed. This research also illustrated the ability to initiate the cationic polymerization of cyclic ketene acetals by acidified carbon black while avoiding subsequent polymer decomposition. © 1997 John Wiley & Sons, Inc.     

Studies on silicon-containing fragrance raw materials I. Syntheses and structure-odor relationship of acetals of 4-trimethylsilyl-3-cyclohexenone and 4-trimethylsilylcyclohexanone and their carbon counterparts

In order to investigate the structure-odor relationship of odoriferous compounds and search for new aroma chemicals, seven acetals of 4-trimethylsilyl-3-cyclohexenone and their carbon counterparts were synthesized by Birch reduction of 4-substituted anisoles and then acetalization. Seven acetals of 4-trimethylsilylcyclohexanone and their carbon counterparts were synthesized similarly. Structures of all new compounds were determined by MS, IR and ¹H NMR , and their characteristic odors were evaluated as well. The characteristic odors of the acetals formed by 4-substituted-3-cyclohexenone and 1,2-diols are fruity and woody. The acetals formed from 1, 3-diols are woody, and formed with 1, 4-diols are very faint in odor. Odors of acetals of 4-substituted cyclohexanone are all very weak. As a whole, odors of organosilicon compounds are weaker, but somewhat more delicate than their carbon counterparts.