Ruthenium catalyzed synthesis of secondary or tertiary amines from amines and alcohols

Unsymmetrical secondary and tertiary amines are prepared by the ruthenium catalyzed reaction of alcohols with amines, which provides highly efficient method for synthesis of cyclic amines.     

Analysis of amines in petroleum

An analytical method for differentiation of primary, secondary, and tertiary amines using exhaustive trifluoroacetylation prior to GC/MS has been developed. Using the conditions described in the report, most primary amines add two and secondary amines add one trifluoroacetyl group. In general, tertiary amines do not react. GC retention indices and relative GC/MS total ion current response factors for 102 trifluoroacetyl derivatives are reported. Examples of the application of the method to petroleum and coal liquid products are provided. Because of the limited thermal stability of the derivatives of primary amines, the method is applicable only to distillates boiling below 370 °C (700 °F).     

Selective N-alkylation of amines using nitriles under hydrogenation conditions: facile synthesis of secondary and tertiary amines

Nitriles were found to be highly effective alkylating reagents for the selective N-alkylation of amines under catalytic hydrogenation conditions. For the aromatic primary amines, the corresponding secondary amines were selectively obtained under Pd/C-catalyzed hydrogenation conditions. Although the use of electron poor aromatic amines or bulky nitriles showed a lower reactivity toward the reductive alkylation, the addition of NH(4)OAc enhanced the reactivity to give secondary aromatic amines in good to excellent yields. Under the same reaction conditions, aromatic nitro compounds instead of the aromatic primary amines could be directly transformed into secondary amines via a domino reaction involving the one-pot hydrogenation of the nitro group and the reductive alkylation of the amines. While aliphatic amines were effectively converted to the corresponding tertiary amines under Pd/C-catalyzed conditions, Rh/C was a highly effective catalyst for the N-monoalkylation of aliphatic primary amines without over-alkylation to the tertiary amines. Furthermore, the combination of the Rh/C-catalyzed N-monoalkylation of the aliphatic primary amines and additional Pd/C-catalyzed alkylation of the resulting secondary aliphatic amines could selectively prepare aliphatic tertiary amines possessing three different alkyl groups. According to the mechanistic studies, it seems reasonable to conclude that nitriles were reduced to aldimines before the nucleophilic attack of the amine during the first step of the reaction.     

Photostabilizing activity of tertiary hindered amines

The influence of the N-alkyl group of tertiary hindered amines on the photostabilization of polymers was studied. The photostabilizing effects of the tertiary amine derivatives of 4-benzoyloxy-2,2,6,6-tetramethylpiperidine ( 1a ) in polypropylene were compared. All tertiary amine derivatives having α-H to hindered N showed higher effectiveness than 1a . Model liquid phase photoxidations were carried out by irradiating (UV-lamp) the solutions of tertiary hindered amines containing tert-butyl hydroperoxide as a photoinitiator. The tertiary hindered amines were oxidized more easily than corresponding parent hindered amine and converted to the parent amine, which was identified as its salt, resulting from the carboxylic acid produced from the N-alkyl group by oxidation. The thermal reaction of the tertiary hindered amines with tert-butyl hydroperoxide was also studied in the liquid phase. The tertiary hindered amines decomposed tert-butyl hydroperoxide more rapidly than the parent secondary hindered amine, and generated the parent amine. It was also found that the photostabilizing effects of tertiary hindered amines for polyolefins were higher than that of the parent secondary hindered amine.     

Sensitive fluorescent detection and Lewis basicity of aliphatic amines

In this contribution is reported the sensitive properties of the Zn(II) Schiff base complex, 1, in dichloromethane with respect a series of primary, secondary, and tertiary aliphatic amines through the study of fluorescence enhancement upon amine coordination to the Lewis acidic Zn(II) metal center with formation of 1:1 adducts. It is found that complex 1 exhibits selectivity and nanomolar sensitivity for primary and alicyclic amines. A distinct selectivity is also observed along the series of secondary or tertiary amines, paralleling the increasing steric hindrance at the nitrogen atom. The binding interaction can be related to the Lewis basicity of the coordinating amine; thus, complex 1 represents a suitable reference Lewis acid, and estimated binding constants within the investigated amine series can be related to their relative Lewis basicity. A relative order of the Lewis basicity can be established for acyclic amines, primary > secondary > tertiary, while an inverted order, tertiary > secondary ≈ primary (acyclic), is found in the case of alicyclic amines. The present approach represents a simple, suitable method to ranking the relative Lewis basicity of aliphatic amines in low-polarity, nonprotogenic solvents.     

Reductive cleavage of axially disymmetric tertiary amines and quaternary ammonium salts by lithium aluminium hydride. Synthesis of new 1,1′-binaphthyl substituted amines

Axially disymmetric tertiary amines or quaternary ammonium salts $\text{A}$ are synthesized by double alkylation of primary or secondary amines with racemic or optically pure 2,2′-bis (bromomethyl)-1,1′-binaphthyl. Their reductive cleavage by lithium aluminium hydride in refluxing THF leads to chiral secondary or tertiary amines $\text{B}$, substituted by a binaphthyl unit, with high yields and absence of racemization.     

Simultaneous spectrophotometric analysis of aliphatic amines utilizing thermochromism of charge-transfer complexes with tetrabromophenolphthalein ethyl ester.

Aliphatic amines, such as n-hexylamine (primary), di-n-hexylamine (secondary) and tri-n-hexylamine (tertiary amine), react with tetrabromophenolphthalein ethyl ester molecules (TBPEH) to form reddish or red-violet charge-transfer complexes (CT complexes) in 1,2-dichloroethane (DCE). The absorption maxima of the CT complexes with all primary amines occur at around 560 nm, with secondary amines at 570 nm and, with tertiary amines at 580 nm. The CT complex formation constants with TBPEH in DCE increase in the order of the primary, secondary and tertiary amines, but their constants decrease quantitatively with an increase in temperature. This phenomenon (thermochromism) could be applied to the simultaneous spectrophotometric determination of primary amine and secondary amine, or secondary amine and tertiary amine in a mixed solution utilizing the difference of absorbance with temperature changes.     

Palladium catalysed 3-component cascade synthesis of bis(2-arylallyl) tertiary amines from aryl iodides,allene and primary amines

A 3-component cascade synthesis of bis(2-arylallyl) tertiary amines from aryl iodide, allene and primary aliphatic amines is described; chiral amines give analogous products with no detectable racemisation; mixtures of two different aryl iodides can be utilised to give the mixed tertiary amines as the sole, or major, product; the reaction is sensitive to stereoelectronic effects which lead to mono(2-arylallyl) secondary amines.     

水促进的三组分PBM反应合成三级胺

首次报道了甲醛衍生的胺缩醛和芳基硼酸在水的促进下,可以在没有催化剂的条件下高效的合成三级胺.在此基础上建立了一种利用多聚甲醛,二级胺和芳基或杂环硼酸合成三级胺的高效合成方法.此反应条件温和,操作简单,具有很好的底物适应性,目标产物的收率最高可达93%.     

One-pot synthesis of secondary or tertiary amines from alcohols and amines via alkoxyphosphonium salts

Secondary or tertiary amines may be prepared from primary alcohols and primary or secondary amines by treating triphenylphosphine with N-bromosuccinimide (NBS) in the presence of the alcohol at low temperature, followed by addition of the amine and heating for about 1 h. The yield of amine is good to fair, decreasing sharply with sterically congested alcohols and starting amines.     

n-Butyllithium-mediated synthesis of N-aryl tertiary amines by reactions of fluoroarenes with secondary amines at room temperature

A simple and facile method for the synthesis of aromatic tertiary amines by amination of fluoroarenes with secondary amines in the presence of n-butyllithium at room temperature was reported.     

Selective synthesis of secondary and tertiary amines by cp*iridium-catalyzed multialkylation of ammonium salts with alcohols

The efficient selective synthesis of secondary and tertiary amines has been achieved by means of Cp*Ir-catalyzed multialkylation of ammonium salts with alcohols without solvent: the reactions of ammonium acetate with alcohols gave tertiary amines exclusively, while those of ammonium tetrafluoroborate afforded secondary amines selectively. Using this method, secondary 5- and 6-membered cyclic amines were synthesized from ammonium tetrafluoroborate and diols in one pot.     

Reactions of the carbonate radical with aliphatic amines

Carbonate radicals react with aliphatic amines by a dual mechanism, viz. (i) hydrogen abstraction and (ii) electron transfer. The former is more probable with primary amines. Tertiary amines react via electron transfer. Both mechanisms may operate in secondary amines. Cyclic tertiary amines react with different rates and their relative reactivities are explained on the basis of the concept of Hoffmann's ‘through bond’ interaction.     

Spectrofluorimetric flow-injection determination of tertiary amines in non-aqueous media

The cyclic condensation of malonic acid with acetic anhydride in non-aqueous media is catalyzed selectively by tertiary amines. This derivatization reaction is adapted for flow injection analysis. A reaction pathway for the cyclization of a mixed anhydride condensate to form a fluorescent fully acylated phloroglucinol carboxylic acid is proposed. The effects of reaction parameters on the sensitivity of the reactionare described and calibration data are presented for ?2.7 mM triethylamine, tripentylamine, N,N-diethylaniline and pyridine. A secondary amine (diethylamine) gave a negligible response, but both primary and secondary amines partially quenched the fluorescence induced by a tertiary amine.     

Hydrogen bonding by alcohols and amines

The pure base calorimetric method has been used to determine the enthalpies of hydrogen bond complex formation between aliphatic amines and alcohols. The enthalpies of complexation for the series methanol-n-butanol bonding with triethylamine increase with decreasing alkyl chain length in accordance with the electron donating properties of alkyl groups. Unexpectedly, the enthalpies for the complexes of n-butanol with tributylamine, tripropylamine, and triethylamine increase with decreasing alkyl chain length.Primary and secondary amines form hydrogen bonded complexes with n-butanol in which the amine protons form an NH···O bond with the alcohol and the alcohol hydroxyl proton donates a proton to the amine nitrogen. The difference in enthalpy of complex formation between tertiary amines and secondary amines is largely accounted for by the involvement of the amine proton of the secondary amine. Primary amines, like secondary amines, donate only one proton to the complex with n-butanol but have a larger complex enthalpy than secondary amines probably because of steric hindrance and differences in basicity.     

Chemoselective organocatalytic aerobic oxidation of primary amines to secondary imines

Biomimetic aerobic oxidation of primary benzylic amines has been achieved by using a quinone catalyst. Excellent selectivity is observed for primary, unbranched benzylic amines relative to secondary/tertiary amines, branched benzylic amines, and aliphatic amines. The exquisite selectivity for benzylic amines enables oxidative self-sorting within dynamic mixtures of amines and imines to afford high yields of cross-coupled imine products.     

Oxidation of secondary amines by molecular oxygen and cyclohexanone monooxygenase

Cyclohexanone monooxygenase from Acinetobacter calcoaceticus catalyzed the oxidation of tertiary and secondary amines to N-oxides and nitrones, respectively. The formation of a hydroxylamine intermediate was involved with secondary amines as starting substrates.     

N-nitrosation of secondary amines

Conclusions A method was proposed for the N-nitrosation of secondary amines using N₂O₄ complexes in combination with tertiary amines or pyridine.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 226–227, January, 1978.     

pK(a) values and geometries of secondary and tertiary amines complexed to boronic acids-implications for sensor design

[structure in text] The pK(a) values and the geometries of secondary and tertiary amines adjacent to boronic acids were determined using potentiometric and (11)B NMR titrations. The studies showed that the secondary ammonium ion has a pK(a) similar to that of the tertiary ammonium species, which leads to the formation of tetrahedral boron centers at pH values above approximately 5.5. Therefore, secondary amines as well as tertiary amines, when placed proximal to boron centers, can be used to create tetrahedral boronic acids at neutral pH for diol complexation.     

Fluorimetric method for the determination of long-chain amines in water

A method is presented for the determination of long-chain quaternary ammonium salts, tertiary amines and secondary amines in water or aqueous raffinates, based on their extraction and fluorimetric determination as amine salts with Eosine Yellowish in toluene-hexanol (4:1) as solvent. No interferences were obtained from metal ions, or chloride, nitrate or phosphate ions when a back-washing method was applied to the sample extract. The method allows the determination of long-chain tertiary amines down to 4 ppM.