Raman bandshape analysis and DFT study of CO and CH stretching modes of NN-Dibutyl formamide in DMSO solvent`

The study reports the inter-molecular interactions and dynamics of CO and CH stretching modes of NN- Dibutyl Formamide (DBF) in DMSO solvent using Raman spectroscopic technique. The Raman band of CO and CH stretching modes have been deconvoluted into two distinct bands for neat as well as in DMSO solvent. Peak wavenumbers of CO stretching modes show red shift while CH stretching modes shows blue shift with the increase in solvent concentrations. The optimized geometric parameters, vibrational wavenumbers, Mulliken atomic charges and natural bond orbitals of the molecule has been computed using Density Functional Theory (DFT) method with basis set 6-31 +G (d, p). In addition, the same basis set has been carried out with counterpoise keyword accounting BSSE calculation on monomer and dimer states with DMSO solvent to present an appropriate interacting environment. IEF-PCM solvation model has also been computed using the same basis set and compares the geometrical parameters and vibrational wavenumbers of the molecules and in their complexes. In order to get a complete study of the DBF + DMSO complexes, explicit solvation model has also been calculated for Monomer DBF in two solvent molecules. Theoretical calculations of frequencies have been compared with the experimental findings and the results are found in good agreement.     

Vibrational assignment, <Emphasis Type="Italic">ab initio</Emphasis> calculation and normal coordinate analysis of 2,2′-biquinoline

The vibrational wavenumbers and the fundamental modes of 2,2′-biquinoline were obtained by density functional theory (DFT) with the B3LYP functional using the 6-31G(d,p) basis set. The calculated wavenumbers were scaled by a single factor of 0.965 to correct them for vibrational anharmonicity, but the force constants were overestimated. Normal coordinate analysis of the molecule was also carried out by using the force field of the quinoline molecule and the force field parameters of quinoline are shown to be transferable to 2,2′-biquinoline. The potential energy distribution associated with the normal modes is also given. The theoretical wavenumbers are found to be in good agreement with the experimental data.     

FT-IR, FT-Raman, vibrational assignments, and density functional studies of 1,2,4-triazole-3-carboxylic acid, and its tautomers, dimers

The molecular geometry, relative energy, and vibrational properties (harmonic wavenumbers, total energy distributions) of several plausible tautomers and homodimers of 1,2,4-triazole-3-carboxylic acid (TCA) molecule were analyzed by applying the density functional theory (DFT), with the B3LYP functional and the 6-311++G(d,p) basis set. FT-IR and FT-Raman spectra of the biomolecule TCA were recorded in the regions 4000–100 cm⁻¹ and 3500–100 cm⁻¹, respectively. The calculated vibrational wavenumbers were compared with IR and Raman experimental data. The atomic charges and the dimer forms of the most stable tautomer were also discussed.     

Density functional theory calculations of the internal rotations and vibrational spectra of 2-, 3- and 4-formyl pyridine

The torsional potentials, molecular conformations and vibrational spectra, of 2-, 3- and 4-formyl pyridine have been investigated using density functional theory (DFT) method with 6-31+G* basis set. From the calculations, 2-formyl pyridine and 3-formyl pyridine were predicted to exist predominantly in cis conformation with the cis-trans rotational barrier of 9.38 kcal/mol and 8.55 kcal/mol, respectively. The two equivalent planar structures of 4-formyl pyridine are separated by an energy barrier of 7.18 kcal/mol. The vibrational wavenumbers and the corresponding vibrational assignments of molecules in C(s) symmetry were examined theoretically and the calculated Infrared of the molecules in the cis conformation was plotted. Observed wavenumbers for normal modes were compared with those calculated from normal mode coordinate analysis carried out on the basis of DFT force fields using the standard 6-31+G* basis set of the theoretical optimized geometry.     

Calculation of the O-H stretching vibrational overtone spectrum of the water dimer

The O-H stretching vibrational overtone spectrum of the water dimer has been calculated with the dimer modeled as two individually vibrating monomer units. Vibrational term values and absorption intensities have been obtained variationally with a computed dipole moment surface and an internal coordinate Hamiltonian, which consists of exact kinetic energy operators within the Born-Oppenheimer approximation of the monomer units. Three-dimensional ab initio potential energy and dipole moment surfaces have been calculated using the internal coordinates of the monomer units using the coupled cluster method including single, double, and perturbative triple excitations [CCSD(T)] with the augmented correlation consistent valence triple zeta basis set (aug-cc-pVTZ). The augmented correlation consistent valence quadruple zeta basis set (aug-cc-pVQZ), counterpoise correction, basis set extrapolation to the complete basis set limit, relativistic corrections, and core and valence electron correlations effects have been included in one-dimensional potential energy surface cuts. The aim is both to investigate the level of ab initio and vibrational calculations necessary to produce accurate results when compared with experiment and to aid the detection of the water dimer under atmospheric conditions.     

Vibrational spectra and natural bond orbital analysis of the herbicidal molecule 2(4-chlorophenoxy)-2-methyl propionic acid

The herbicide 2(4-chlorophenoxy)-2-methyl propionic acid (MCPP) has been subjected to NIR FT-Raman and infrared spectral studies. The optimized molecular structure, vibrational wavenumbers, IR intensities and Raman activities have been calculated by using density functional method (B3LYP) with the standard 6-31G(d) basis set. The calculated molecular geometry has been compared with the XRD data. The detailed assignments of the normal modes have been performed based on the potential energy distribution (PED) following the scaled quantum mechanical force field (SQMFF) methodology. The IR and Raman spectra have been plotted for the calculated wavenumbers. The simulated spectra satisfactorily coincide with the experimental spectra. The strong hyperconjugative interaction and charge delocalization that leads to the stability of the molecule have been investigated with the aid of natural bond orbital (NBO) analysis.     

Vibrational spectra and assignments of 5-amino-2-chlorobenzoic acid by ab initio Hartree-Fock and density functional methods

The Fourier transform Raman and Fourier transform infrared spectra of 5-amino-2-chlorobenzoic acid (5A2CBA) were recorded in the solid phase. Geometry opitimizations were done without any constraint and harmonic-vibrational wavenumber and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and DFT levels invoking 6-311G(d,p) basis set and the results are compared with the experimental values with the help of three specific scaling procedures, the observed vibrational wavenumbers in FTIR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range, the error obtained was in general very low. The appropriate theoretical spectrograms for the FTIR spectra of the title molecule were also constructed.     

Theoretical study on intermolecular interaction of epoxyethane dimer

Ab initio calculations at Hartree–Fock and fourth‐order Mø ller–Plesset (MP4) correlation correction levels with 6‐31G* basis set have been performed on the epoxyethane dimer. Dimer binding energies have been corrected for the basis set superposition error (BSSE) and the zero‐point energy. The greatest corrected dimer binding energy is −8.36 kJ/mol at the MP4/6‐31G*//HF/6‐31G* level. The natural bond orbital analysis has been performed to trace the origin of the weak interactions that stabilize dimer. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 94–98, 2000     

Theoretical Study on Intermolecular Interactions and Thermodynamic Properties of Nitroamine Dimers

Ab initio self-consistent field(SCF) and Mφller-Plesset correlation correction methods employing 6-31G^** basis set have been applied to the optimizations of nitroamine dimers.The binding energies have been corrected for the basis set superposition error (BSSE) and the zero-point energy.Theree optimized dimers have been obtained.The BSSE corrected binding energy of the most stable dimer is predicted to be -31.85kJ/mol at the MP4/6-31G^**//MP2/6-31G^** level.The energy barriers of the Walden conversion for -NH2 group are 19.7kJ/mol and 18.3kJ/mol for monomer and the most stable dimer,respectively.The molecular interaction makes the internal rotation around N1-N2 even more difficult.The thermodynamic properties of nitroamine and its dimers at different temperatures have been calculated on the basis of vibrational analyses.The change of the Gibbs free energy for the aggregation from monomer to the most stable dimer at standard pressure and 298.2 K is predicted to be 14.05kJ/mol.     

A theoretical study on the intermolecular interaction of energetic system-Nitromethane dimer

Three optimized geometries of nitromethane dimer have been obtained at the HF/6-31G level.Dimer binding energies have been corrected for the basis set superposition error (BSSE) and the zero point energy.Computed results indicate that the cyclic structure of (CH3NO2)2 is the most stable of three optimized geometries,whose corrected binding energyis 17.29 kJ mol-1 at the MP4SDTQ/6-31G//HF/6-31G level.In the optimized structures of nitromethane dimer,the inter-molecular hydrogen bond has not been found; and the charge-transfer interaction between CH3NO2 subsystems is weak; and the correlation interaction energy makes a little contribution to the intermolecular interaction energy of the dimer.     

Ab initio calculations of structures and interaction energies of toluene dimers including CCSD(T) level electron correlation correction

The intermolecular interaction energy of the toluene dimer has been calculated with the ARS-F model (a model chemistry for the evaluation of intermolecular interaction energy between ARomatic Systems using Feller's method), which was formerly called as the AIMI model III. The CCSD(T) (coupled cluster calculations with single and double substitutions with noniterative triple excitations) interaction energy at the basis set limit has been estimated from the second-order Moller-Plesset perturbation interaction energy at the basis set limit obtained by Feller's method and the CCSD(T) correction term obtained using a medium-size basis set. The cross (C(2)) dimer has the largest (most negative) interaction energy (-4.08 kcal/mol). The antiparallel (C(2h)) and parallel (C(S)) dimers (-3.77 and -3.41 kcal/mol, respectively) are slightly less stable. The dispersion interaction is found to be the major source of attraction in the toluene dimer. The dispersion interaction mainly determines the relative stability of the stacked three dimers. The electrostatic interaction of the stacked three dimers is repulsive. Although the T-shaped and slipped-parallel benzene dimers are nearly isoenergetic, the stacked toluene dimers are substantially more stable than the T-shaped toluene dimer (-2.62 kcal/mol). The large dispersion interaction in the stacked toluene dimers is the cause of their enhanced stability.     

FTIR, Raman spectra and ab initio calculations of 2-mercaptobenzothiazole

FTIR and Raman spectra of a rubber vulcanization accelerator, 2-mercaptobenzothiazole (MBT), were recorded in the solid phase. The harmonic vibrational wavenumbers, for both the toutomeric forms of MBT, as well as for its dimeric complex, have been calculated, using ab initio RHF and density functional B3LYP methods invoking different basis sets upto RHF/6-31G** and B3LYP/6-31G** and the results were compared with the experimental values. Conformational studies have been also carried out regarding its toutomeric monomer forms and its dimer form. With all the basis sets the thione form of MBT (II) is predicted to be more stable than thiol form (I) and dimeric conformation (III) is predicted to be more stable with monomeric conformations (I) and (II). Vibrational assignments have been made, and it has been found that the calculated normal mode frequencies of dimeric conformation (III) are required for the analysis of IR and Raman bands of the MBT. The predicted shift in NH- stretching vibration towards the lower wave number side with the B3LYP/6-31G** calculations for the most stable dimer form (III), is in better agreement with experimental results. The intermolecular sulfur-nitrogen distance in N-H...S hydrogen bond was found to be 3.35 angstroms from these calculations, is also in agreement to the experimental value.     

FTIR and FT Raman, molecular geometry, vibrational assignments, ab initio and density functional theory calculations for 1,5-methylnaphthalene

The FTIR and FT Raman vibrational spectra of 1,5-methylnaphthalene (1,5-MN) have been recorded using Brunker IFS 66 V Spectrometer in the range 3600-10 cm(-1) in the solid phase. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The Optimized molecular geometry, harmonic frequencies, electronic polarizability, atomic charges, dipole moment, rotational constants and several thermodynamic parameters in the ground state were calculated using ab initio Hartree Fock (HF) and density functional B3LYP methods (DFT) with 6-311++ G(d) basis set. With the help of different scaling factors, the observed vibrational wavenumbers in FTIR and FT Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range. The results of the calculations were applied to simulated infrared and Raman spectra of the title compound which showed excellent agreement with the observed spectra.     

DFT computations,vibrational spectra,monomer, dimer,NBO and NMR analyses of antifungal agent: 3,5-Dibromosalicylic acid

The experimental and theoretical study on the structures and vibrations of 3,5-dibromosalicylic acid (DBSA) are presented. The FT-IR and FT-Raman of the title compound have been recorded. The molecular structures, vibrational wavenumbers, infrared intensities, Raman activities were calculated. The energies of DBSA are obtained for all the eight conformers from density functional theory with 6-311++G(d,p) basis set calculations. From the computational results, C1 or C5 forms are identified as the most stable conformers of DBSA. The spectroscopic and theoretical results are compared with the corresponding properties for DBSA monomer and dimer of C1 (or C5) conformer. Intermolecular hydrogen bonds are discussed in dimer structure of the molecule. NBO analysis is useful to understand the intramolecular hyperconjugative interaction between lone pair O9 and C7O8. The calculated HOMO–LUMO energies reveal charge transfer occurs within the molecule. The polarizability, first hyperpolarizability, anisotropy polarizability invariant has been computed using quantum chemical calculations. The isotopic chemical shift computed by ¹H and ¹³C nuclear magnetic resonance (NMR) chemical shifts of the DBSA molecule, calculated using the gauge invariant atomic orbital (GIAO) method, also shows good agreement with experimental observations.     

Combining ab initio calculations and Fourier-transform infrared (FT-IR) spectroscopy for quantitative analysis of multicomponent systems in solution: Tautomer proportions of ethyl acetoacetate

A quantitative analysis method, combined experimental–computational approach (CECA), has been developed and applied for the detection of tautomer ratios of ethyl acetoacetate (eaa) in three organic solvents (acetonitrile, methanol, and chloroform). In order to obtain the relative concentrations of tautomers of eaa, IR intensities of both tautomers have been calculated at three different calculation levels (B3LYP/6-311++G(2d,2p), MP2/cc-pVDZ, and MP2/cc-pVTZ), augmented by the data obtained using basis set extrapolation technique. Experimental absorption bands were recorded at specific wavenumbers with FT-IR spectrophotometer and combined with calculated IR intensities in Lambert–Beer equation. Though the pure computational approach does not provide accurate values of the tautomers’ ratio, yet the results obtained using the CECA method are very close to the experimental data.     

FT-IR, FT-Raman spectra and ab initio DFT vibrational analysis of p-bromophenoxyacetic acid

The Fourier transform Raman and Fourier transform infrared spectra of p-bromophenoxyacetic acid were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities were calculated by HF and DFT (B3LYP) method with the 6-31G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental ones. A detailed interpretation of the infrared and Raman spectra of p-bromophenoxyacetic acid is reported on the basis of the calculated potential energy distribution. The theoretical spectrograms for the IR spectrum of the title molecule have been constructed.     

Ab initio quantum chemical investigation of the ground and excited states of salicylic acid dimer

The structure and stability of different forms of salicylic acid dimer have been examined by Hartree-Fock and density functional theoretic calculations using 6-31G(d,p) and 6-311++g(d,p) basis sets. Vertical excitation energies for the monomer as well as the dimer have been computed using the time-dependent density functional theory using 6-311++G(d,p) basis set. The predicted absorption maxima for the first excited singlet state of salicylic acid monomer and the dimer of the primary form are in reasonable agreement with the experimental result. There is a slight red shift (approximately 6 nm) in the absorption maximum in going from the monomer to the dimer, in accord with the experimental observation. Configuration-interaction calculations including single excitation have been carried out to map the potential-energy profile for the intra- as well as the intermolecular proton transfer in different forms of the dimer. The barrier for proton transfer in the ground state as well as the excited states makes it clear that most of the processes take place in the primary form and largely by intramolecular proton transfer.     

Polarizable interaction potential for water from coupled cluster calculations. I. Analysis of dimer potential energy surface

A six-dimensional interaction potential for the water dimer has been fitted to ab initio interaction energies computed at 2510 dimer configurations. These energies were obtained by combining the supermolecular second-order energies extrapolated to the complete basis set limit from up to quadruple-zeta quality basis sets with the contribution from the coupled-cluster method including single, double, and noniterative triple excitations computed in a triple-zeta quality basis set. All basis sets were augmented by diffuse functions and supplemented by midbond functions. The energies have been fitted using an analytic form with the induction component represented by a polarizable term, making the potential directly transferable to clusters and the bulk phase. Geometries and energies of stationary points on the potential surface agree well with the results of high-level ab initio geometry optimizations.     

硝酸乙酯分子间相互作用的ab initio研究

在abinitio-HF/6-31G水平上求得硝酸乙酯二聚体势能面上的四种优化构型和电子结构。经MP2电子相关校正和基组叠加误差(BSSE)以及零点能(ZPE)校正，求得二聚体的最大结合能为11.46kJ.mol^-^1，还进行HF/6-311G和HF/6-311++G水平的总能量比较计算，发现6-31G基组对计算结合能比较适合，二子体系间的电荷转移很少，对优化构型进行振动分析，并基于统计热力学求得从单体形成二聚体的热力学性质变化。     

Density-functional theory-symmetry-adapted intermolecular perturbation theory with density fitting: a new efficient method to study intermolecular interaction energies

The previously developed DFT-SAPT approach, which combines symmetry-adapted intermolecular perturbation theory (SAPT) with a density-functional theory (DFT) representation of the monomers, has been implemented by using density fitting of two-electron objects. This approach, termed DF-DFT-SAPT, scales with the fifth power of the molecular size and with the third power upon increase of the basis set size for a given dimer, thus drastically reducing the cost of the conventional DFT-SAPT method. The accuracy of the density fitting approximation has been tested for the ethyne dimer. It has been found that the errors in the interaction energies due to density fitting are below 10(-3) kcal/mol with suitable auxiliary basis sets and thus one or two orders of magnitude smaller than the errors due to the use of a limited atomic orbital basis set. An investigation of three prominent structures of the benzene dimer, namely, the T shaped, parallel displaced, and sandwich geometries, employing basis sets of up to augmented quadruple-zeta quality shows that DF-DFT-SAPT outperforms second-order Moller-Plesset theory (MP2) and gives total interaction energies which are close to the best estimates inferred from combining the results of MP2 and coupled-cluster theory with single, double, and perturbative triple excitations.